ALLMATIC AV4
Central Unit for Manual Control of up to 4 Tubular Motors
Product Overview
The ALLMATIC AV4 is a central unit designed for the manual control of up to four tubular motors. It facilitates both group and individual motor operation.
Product Dimensions
Overall dimensions: 140.50 x 182.00 x 80.60 mm
Mounting hole dimensions: 114.00 x 156.00 mm
Installation
- Connect the 230VAC power supply as indicated.
- If a motor rotates in the wrong direction, reverse the appropriate Brown and Black wires.
ATTENTION:
- Connect all tubular motor earth wires to the earth terminal.
- The maximum current absorbed per output is 4 A.
Wiring for Group Control
Master Keyswitch: Allows all connected motors to operate simultaneously.
ATTENTION: The maximum total load allowed for group control is 6.3 A.
Wiring Diagram Description: The diagram shows a 230VAC mains supply connected to terminals 1 (L), 2 (N), and E (Earth). Terminals 3-4, 5-7, 8-10, 11-13, and 14-16 are for connecting four motors (M1, M2, M3, M4) respectively, with each motor having 'Open', 'Close', and 'Common' connections. Terminals 17-19 are for a Master Keyswitch, with connections for 'Open', 'Close', and 'Common'.
Wiring for Individual Control
Individual Keyswitches: Allows individual operation of tubular motors via their corresponding selector switches.
ATTENTION: Activate only one motor at a time.
Wiring Diagram Description: This diagram illustrates the individual wiring for each motor (M1, M2, M3, M4). Each motor is connected to its respective terminals (e.g., M1 to 5, 6, 7) with 'Open', 'Close', and 'Common' connections. The diagram shows a simplified representation of the keyswitch connections for each motor.
Product Disposal
This product is an integral part of automation systems and must be disposed of accordingly. Like installation, dismantling operations at the end of the product's life must be carried out by qualified personnel. The product is composed of various materials; some can be recycled, while others must be disposed of. Consult local regulations for recycling or disposal systems applicable to this product category.
WARNING:
- Certain product parts may contain polluting or dangerous substances that could harm the environment and human health if improperly disposed of.
- As indicated by the symbol [crossed-out bin symbol], this product must not be disposed of with household waste. Proceed with selective waste collection in accordance with local regulations, or return the product to the vendor when purchasing an equivalent new product.
- Local regulations may impose severe penalties for improper disposal of this product.
Warranty
The manufacturer's warranty is valid from the date stamped on the product and is limited to the repair or replacement, free of charge, of parts recognized by the manufacturer as defective due to essential lack of quality in materials or workmanship. The warranty does not cover damage or defects caused by external agents, lack of maintenance, overload, natural wear and tear, incorrect selection, faulty installation, or other causes not attributable to the manufacturer. Altered products will not be guaranteed or repaired. Provided data is purely indicative. No liability can be attributed for reductions in performance or failures due to environmental interference. The manufacturer's liability for damages caused to anyone by accidents of any nature caused by defective products is limited to what is provided by Italian law.
