
Instruction Manual for Littleone models including: NP188A, NP188A Smart Bottle, Smart Bottle, Bottle
Littleone Inc NP188A Smart Bottle Pro 2BDKQ-NP188A 2BDKQNP188A np188a
NP188A Smart Bottle Pro by Littleone
File Info : application/pdf, 7 Pages, 227.43KB
DocumentDocumentUser Instruction Manual Smart Bottle Pro NP188A Welcome to the Littleone Family! Congratulations on choosing the Littleone Smart Bottle Pro the next generation baby bottle designed to provide optimal nutrition and feeding comfort for your baby. This instruction manual will guide you through the features, use, and maintenance of your new Smart Bottle Pro. Table of Contents 1. Introduction to Littleone Smart Bottle Pro 2. Important Safety Instructions 3. Components and Assembly 4. Initial Setup and Charging 5. Operating Your Smart Bottle Pro 6. Cleaning and Maintenance 7. Troubleshooting Common Issues 8. Warranty and Customer Support 9. Compliance Statement 1. Introduction to Littleone Smart Bottle Pro The Littleone Smart Bottle Pro combines innovative technology with the comfort and convenience of a traditional baby bottle. It is equipped with features like real-time temperature control, feeding duration tracking, and volume measurement, all designed to make feeding time easier and more enjoyable. 2. Important Safety Instructions · Always supervise your baby during feeding. · Do not use the bottle if any component appears damaged. · Avoid direct exposure to sunlight and extreme temperatures. · Read all instructions carefully before use. 3. Components and Assembly Your Smart Bottle Pro comes with the following components: · Bottle base with electronic components · Silicone nipple · Bottle cap · USB charging cable To assemble, attach the silicone nipple to the bottle cap, then screw the assembled cap onto the bottle base. Ensure all parts are securely fastened before use. 4. Initial Setup and Charging Before the first use, charge your bottle using the provided USB cable. A full charge takes approximately 2 hours. The LED indicator will show a green light when fully charged. 5. Operating Your Smart Bottle Pro · Turning On/Off: Press and hold the power button for 3 seconds. · Setting the Temperature: Press the temperature button to select the desired setting. · Monitoring Feed: The bottle records feeding duration and the amount consumed. 6. Cleaning and Maintenance · Disassemble all parts and wash with warm soapy water. · Rinse thoroughly and air dry. · Do not immerse the electronic base in water. · Sterilize the nipple and bottle cap as needed. 7. Troubleshooting Common Issues · If the bottle does not turn on, ensure it is charged. · For temperature inaccuracies, recalibrate using the settings in the Littleone mobile app. · If sync issues occur, check your Bluetooth connection and the app for updates. 8. Warranty and Customer Support Your Littleone Smart Bottle Pro comes with a one-year warranty covering defects in materials and workmanship. For customer support, please contact us at [insert contact details]. Keep this manual for future reference and ensure safe and enjoyable use of your Littleone Smart Bottle Pro. Happy feeding! 9. Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radiation Exposure: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and can be used without any restrictions. Technical specifications: Operating frequency: 2402-2480MHz Max. RF output power: 0dBm Hardware version: Rev 1.2 Software version: 10350079 Operating temperature: -20 to +50 The product can be used in EU countries without any restrictions. EU Regulatory Conformance: Hereby, we (Littleone Inc) declared that this device is in compliance with the Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.littleone.io Correct disposal: Do not dispose of this product with the normal household waste at the end of its life cycle. Return it to a collection point for the recycling of electrical and electronic devices. This is indicated by the symbol on the product, user manual or packaging. The materials are reusable according to their markings. By reusing, recycling or other forms of utilisation of old devices you make an important contribution to the protection of our environment. Please contact your local authorities for details about collection points. Manufacturer: Littleone Inc Address: F20, 8 Seongnamdaero 331 beon-gil, Bundang, Seongnam, Gyeonggi, Korea US Representative: Company name: Littleone Platform Inc Address: 3003 N 1st Street #221, San Jose, CA 95134 Tel: 213-328-6543 Email: blee@littleone.io Web: www.littleone.io