May 25, 2022 — While adjusted to door closer mode (parameter. Hd = 1), the system is optimized for manual operation. ... With the aid of the VARIO cover, you may also increase ...
ED 100 ED 250 Swing door operators Technical product brochure dormakaba ED 100, ED 250 Swing door operators with force balancing technology* With their ED 100 and ED 250, dormakaba offers electromechanical swing door operators for various fields of application. Simply select the suitable version according to your prevailing door-leaf width and weight: While the ED 100 is suitable for doors with a weight of up to 160 kg or a door width of 1,100 mm, the ED 250 is designed for doors with a width of 1,600 mm or a door weight of 400 kg. Apart from the extended cover, dormakaba also provides an easy-to-install integrated door coordinator. With the aid of the dormakaba Upgrade Cards, the system's functional range may be adapted to various door versions. The large scope of integrated functions furthermore ensures that the majority of possible applications may easily be realized. Benefits · Flexible configuration: Customers only pay for the functions they actually require. · Low-noise application due to multi-stage gear. · Elegant visual appearance: dormakaba design provides a operator height of only 70 mm. · Various functions as standard. · W ith integrated smoke detector · N ew: Technically revised arm system in a new design. · N ew: Better durability of the gear due to the use of the force balancing technology. Fields of application · For single- or double-leaf swing doors. Choose between the ED 100 and the ED 250 in accordance with your prevailing door-leaf width and weight. · The version with slide channel as well as the version with standard arm are suitable for application at fire and smoke doors. · Thanks to its low- and full-energy version, the system is suitable to automate both rarely and heavily frequented internal and external doors. · High torque for full-automatic swing doors with radar motion control. · For interior and exterior doors. * Self-alligning gear components during operation, whereby a much better distribution of internal forces can be achieved. 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 Application: ED 100/ED 250 Door weight (kg) 400 360 320 280 ED 250 240 (EN 47*) 200 160 120 ED 100 80 (EN 24) 40 Door width (mm) The operators ED 100 and ED 250 are suitable for most swing doors provided that the combination of door width and door weight lies within the defined functional area. This diagram allows you to determine the maximum values for the door width or door weight or to determine the suitable operator for existing doors. All values apply to an ideal door. The achievable speed is to be lowered for heavy doors in order to ensure the safety of people. Additional door components such as door hinges, seals, locks or other mechanical components may restrict the functional area. The specifications are valid up to a lintel depth of 300 mm; at a depth > 301 mm the door panel weight of the ED 250 is reduced to 160 kg irrespective of the door width. *EN 7: lintel depth max. 125 mm Our Sustainability Commitment We are committed to foster a sustainable development a long our entire value chain in line with our economic, environmental and social responsibilities to ward currentand future generations. Sustainability at product level is an important, future-oriented approach in the field of construction. In order to give quantified disclosures of a product's environmental impacts through its entire life cycle, dormakaba provides Environmental Product Declarations (EPD), based on holistic life cycle assessments. The full EPD is available for download at www.dormakaba.com. 2 Swing door operator in modular design Required operating conditions Ambient temperature Only suitable for dry environments Power supply Class of protection 15 to +50 °C Relative humidity max. 93 % (non condensing) 230 V AC 50 Hz +/ 10 % IP 20 General specifications Dimensions (W x H x D) Dimensions with integrated smoke detector (W x H x D) Min. clearance between hinges (double systems) Min. clearance between hinges for ESR (double systems) Weight of single version Power supply for external accessories Opening angle Manufactured to ISO 9001 Environmental product declaration in accordance with ISO 14025 Programme holder: Institute Construction and Environment e.V. Declaration number: EPD-DOR-2012211-E 685 x 70 x 130 mm 735 x 70 x 130 mm 1,400 mm 1,450 mm 12 kg 24 V DC +/ 10 %, 1.5 A Max. 110° yes yes Integrated functions Hold-open time 30 s, 180 s (optional) Blocking behavior Reversing/Door closer function Locking feedback contact Motor lock Wind load control up to 150 N Voltage-independent braking circuit Adjustable via potentiometer Electronic latching action pulse Force adjustable LED status indicator green Operating voltage indicator red Malfunction indicator yellow Service interval indicator Integrated program switch OFF AUTOMATIC PERMANENT OPEN EXIT ONLY (only for single-leaf systems) User interface with information display Status indicator and parameterisation Slot for dormakaba Upgrade Cards Extension of functional range Update interface Firmware update TMP Temperature Management Program Temperature-related overload protection IDC Initial Drive Control Driving phase optimisation Cycle counter 0 1,000,000 (reasonably subdivided) Power Assist function Servo-supported when opened manually Push & Go function Door opens when moved manually by 4° Inputs, terminals max. 1.5 mm2 Potential-free activator Energized activator Night-/Bank (key switch) Safety sensor Test signal for safety sensor Emergency-Off pushbutton/ Lock switch Inside and outside (NO contact) 8 24 V DC/AC + 10 % NO contact/NC contact Hinge side and opposite hinge side (NC contact) Hinge side and opposite hinge side NC contact/NO contact Outputs, terminals max. 1.5 mm2 Potential-free door status contact, alternatively Door closed Door open Malfunction ED 100 Max. power consumption 120 Watts Closing force EN 1154 EN 24, adjustable Max. door-leaf weight for reveal 160 kg depths of up to 300 mm depending on the door width Door-leaf width 7001,100 mm Opening speed 0 90° 4* 12 seconds Closing speed 90 0° 5* 21 seconds Axle extension 20/30/60 mm Reveal depth for slide channel +/ 30 mm Reveal depth for slide channel CPD 30 60 mm Reveal depth for standard arm 0300 mm ED 250 Max. power consumption 240 Watts Closing force EN 4-7**, adjustable Max. door-leaf weight for reveal 400 kg depths of up to 300 mm depending on the door width Max. door-leaf weight for reveal depths from 301 mm to 500 mm 160 kg Door-leaf width 700 1,600 mm Opening speed 0 90° 3* 12 seconds Closing speed 90 0° 4* 21 seconds Axle extension 20/30/60/90 mm Reveal depth for slide channel +/ 30 mm Reveal depth for slide channel CPD 30 60 mm Reveal depth for standard arm 0 500 mm For reveal depths standard arm 0 350 mm for fire protection * Depending on the door leaf weight, it is automatically limited in the low-energy operating mode according to EN 16005 or DIN 18650, BS 7036-4 and ANSI 156.19. Max. speeds are achieved only in the full-energy mode, with a low door panel weight and a taught opening angle of at least 95°. ** EN 7: lintel depth max. 125 mm 3 dormakaba ED 100, ED 250 Mounting on hinge side, pull-version with slide channel, cover BASIC, standard axle extension Drilling template: pivot pin short 12.5 mm Center of operator axle *Dimension for cover BASIC RM: 735 mm Reveal depth max. +/- 30 mm Drilling template: pivot pin long 25 mm Center of operator axle Upper edge of door leaf Upper edge of door leaf Axle extension A * only for ED 250 4 Standard 22 mm 20 mm 42 mm 30 mm 52 mm 60 mm 82 mm 90 mm* 112 mm* Pivot pin B 12.5 mm 25 mm 19 mm 32 mm Mounting on hinge side, pull-version with CPD arm, cover BASIC, standard axle extension Swing door operator in modular design Drilling template: pivot pin short 12.5 mm Center of operator axle *Dimension for cover BASIC RM: 735 mm Reveal depth max. 60 mm Drilling template: pivot pin long 25 mm Center of operator axle Upper edge of door leaf Upper edge of door leaf Axle extension A * only for ED 250 Standard 22 mm 20 mm 42 mm 30 mm 52 mm 60 mm 82 mm 90 mm* 112 mm* Pivot pin B 12.5 mm 25 mm 31 mm 44 mm 5 dormakaba ED 100, ED 250 Mounting on opposite hinge side, push-version with slide channel, cover BASIC, standard axle extension Drilling template: pivot pin short 12.5 mm Center of operator axle *Dimension for cover BASIC RM: 735 mm Reveal depth max. +/- 30 mm Drilling template: pivot pin long 25 mm Center of operator axle Bottom edge of lintel Bottom edge of lintel Axle extension A * only for ED 250 6 Standard 5 mm 20 mm 25 mm 30 mm 35 mm 60 mm 65 mm 90 mm* 95 mm* Pivot pin B 12.5 mm 25 mm 35 mm 48 mm Swing door operator in modular design Mounting on opposite hinge side, push-version with arm, cover BASIC, standard axle extension 15 150 (EN 7 = 250) 245 (EN 7 = 325) 685* A+33 130 A 33 ED 100 = 0 300 mm ED 250 = 0 500 mm 70 Drilling template: arm EN 3-6 Center of operator axle *Dimension for cover BASIC RM: 735 mm Drilling template: arm EN 7 Center of operator axle Bottom edge of lintel Bottom edge of lintel Axle extension A * only for ED 250 Standard 9 mm 20 mm 29 mm 30 mm 39 mm 60 mm 69 mm 90 mm* 99 mm* ED100_250_Standard_drueckend_2018.eps 7 dormakaba ED 100, ED 250 Mounting on hinge side, pull-version with slide channel, cover PROFESSIONELL, standard axle extension min. 1400 (1450 with ESR) Drilling template: pivot pin short 12.5 mm Center of operator axle min. 1400 (1450 with ESR) The cable entry may be realized on the left or on the right side. Drilling template: pivot pin long 25 mm Center of operator axle Reveal depth max. +/- 30 mm Upper edge of door leaf min. 1400 (1450 with ESR) The cable entry may be realized on the left or on the right side. Upper edge of door leaf Axle extension A * only for ED 250 8 Standard 22 mm 20 mm 42 mm 30 mm 52 mm 60 mm 82 mm 90 mm* 112 mm* Pivot pin B 12.5 mm 25 mm 19 mm 32 mm Swing door operator in modular design Mounting on hinge side, pull-version with CPD arm, cover PROFESSIONELL, standard axle extension 1400 (1450 with ESR) Drilling template: pivot pin short 12.5 mm Center of operator axle Reveal depth max. 60 mm Drilling template: pivot pin long 25 mm Center of operator axle 1400 (1450 with ESR) Upper edge of door leaf 1400 (1450 with ESR) Upper edge of door leaf Axle extension A * only for ED 250 Standard 22 mm 20 mm 42 mm 30 mm 52 mm 60 mm 82 mm 90 mm* 112 mm* Pivot pin B 12.5 mm 25 mm 31 mm 44 mm 9 dormakaba ED 100, ED 250 Mounting on opposite hinge side, push-version with slide channel, cover PROFESSIONELL, standard axle extension min. 1400 (1450 with ESR) Drilling template: pivot pin short 12.5 mm Center of operator axle Reveal depth max. +/- 30 mm min. 1400 (1450 with ESR) Drilling template: pivot pin long 25 mm Center of operator axle Bottom edge of lintel min. 1400 (1450 with ESR) Bottom edge of lintel Axle extension A * only for ED 250 10 Standard 5 mm 20 mm 25 mm 30 mm 35 mm 60 mm 65 mm 90 mm* 95 mm* Pivot pin B 12.5 mm 25 mm 35 mm 48 mm Swing door operator in modular design Mounting on opposite hinge side, push-version with arm, cover PROFESSIONELL, standard axle extension 15 15 150 (EN 7 = 250) 245 (EN 7 = 325) A + 33 50 150 (EN 7 = 250) 50 245 (EN 7 = 325) min. 1400 (1450 with ESR) EN 7 min. 1600 (1650 with ESR) 70 130 A 33 ED 100 = 0 300 mm ED 250 = 0 500 mm Drilling template: arm EN 3-6 Center of operator axle min. 1400 (1450 with ESR) The cable entry may be realized on the left or on the right side. Drilling template: arm EN 7 Center of operator axle Bottom edge of lintel min. 1600 (1650 with ESR) The cable entry may be realized on the left or on the right side. Axle extension A * only for ED 250 Standard 9 mm 20 mm 29 mm 30 mm 39 mm 60 mm 69 mm 90 mm* 99 mm* Bottom edge of lintel 11 dormakaba ED 100, ED 250 System setup The example system is equipped with all available components. It is selected in accordance with the door-leaf width and the door-leaf weight. 01 Mains switch 02 Mains connection 03 Connection unit 04 Axle connection on both sides 05 Operator system (motor/gear/spring) 06 Adjustment of closing force 07 Control unit 08 Switching power supply unit 09 Slot for dormakaba Upgrade Cards 10 User interface with information display 11 ED Cover Basic RM* 12 Internal program switch 13 Slide channel (set)* 14 Standard arm* 15 Slide channel CPD (set)* 16 Complete cover* 17 Cover BASIC RM* 02 03 04 05 01 04 13 06 07 08 09 10 11 12 06 14 15 16 17 *supplied separately System Specification ED 100 swing door operator 230 V ED 250 swing door operator 230 V ED 250 swing door operator PA EN 2 - 4, push-version, fire protection; EN 2 - 4, pull-version, fire protection EN 4 - 7, push-version, fire protection; EN 4 - 6, pull-version, fire protection EN 4 - 7, push-version, fire protection; EN 4 - 6, pull-version, fire protection Order No. 29222311 29202311 29202315 Partly automated double doors with ED 250 Power-Assist (PA) In case of double doors, both door leaves are usually automated. However, it is often sufficient to have only one door leaf automated for passenger traffic. In that situation, the ED 250 PA in combination with a standard ED 100 or ED 250 will come into play and offer a cost-effective solution. The ED 250 PA is used on the inactive leaf in case of double doors. While the active leaf can open fully automatically, the inactive panel is opened only manually and functions as a door closer. Optionally, the Power Assist function allows for an easy opening. However, the integrated locking device allows you to lock both door panels to a permanent open state without the use of any additional components. The ED 250 PA is suitable for fire and smoke control doors and be combined with the ED ESR set for an ED ESR 1/2 for double doors. An upgrade card is not required for the ED 250 PA. 12 Opening and closing forces Way of mounting Closing force EN 1154 Manual closing force (N)*** Closing force in AUTOMATIC mode (N)** Manual opening force (N) Opening force in AUTOMATIC mode (N)** Opening force with activated Power Assist function (N)* Lintel mounting on hinge side with slide channel (pull-version) ED 100 ED 250 Lintel mounting on opposite hinge side with standard arm (push-version)/ slide channel (push-version) ED 100 ED 250 minimum maximum minimum maximum minimum maximum minimum maximum EN 3 EN 4 EN 4 EN 6 EN 3 EN 4 EN 4 EN 7 18 34 26 65 18 37 26 90 20 FE: 150 20 FE: 150 20 FE: 150 20 FE: 150 LE: 67 LE: 67 LE: 67 LE: 67 40 50 55 85 40 55 60 90 20 FE: 150 20 FE: 150 20 FE: 150 20 FE: 150 LE: 67 LE: 67 LE: 67 LE: 67 23 23 23 23 23 23 23 23 FE = With Full-Energy or Fire Protection Upgrade Card, LE = Low-Energy standard operator without upgrade card *Power-Assist function is adjusted to maximum (function is activated at 0° opening width) **The force is activated by an automatic opening in AUTOMATIC mode. *** By installing the push-version with slide channel, the forces are reduced by approx. 33% Door closer mode & AUTOMATIC mode Users may choose between two operation modes: door closer and AUTOMATIC mode. While adjusted to door closer mode (parameter Hd = 1), the system is optimized for manual operation. With its optional Power-Assist function, the door closer mode is tailored to predominantly manually-operated doors where a door closer function is desired. The AUTOMATIC mode (parameter Hd = 0) in turn is especially suitable for mainly automatic access via motion detector or pushbutton. In addition, the door reverses as soon as it runs into an obstruction while closing. On activation of the AUTOMATIC mode, also the wind load control is available. Although in AUTOMATIC mode, the doors are still ready for manual access. In this case we would recommend the Push & Go function. Wind load control ED 100 and ED 250 operators are especially suitable for applications at exterior doors that are subject to varying wind loads and for interior doors separating rooms where different pressure prevails. While the system is in AUTOMATIC mode, the wind load control monitors the driving speed and adjusts the speed correspondingly if it exceeds or falls below the adjusted value. In conjunction with the Full-Energy Upgrade Card, the operator provides a force of up to 150 N at the main closing edge which is then used to compensate environmental influences. The electronic latching action is activated during the last 5° of the closing cycle in order to support the closing action. Power-Assist function The Power-Assist function may be activated while the door is in door closer mode (parameter Hd = 1). As soon as a user opens the door by some degrees, the servofunction supports the manual opening cycle. In addition, the servo support automatically adapts to the adjusted size of the door closer. The level of servo support is adjustable in order to meet the requirements of DIN 18040, DIN Spec 1104, CEN/ TR 15894, BS 8300/2100 and document "M", even up to class EN 6. The smallest adjustable opening torque amounts to 23 Nm/5 lbf unless the hold-open device is triggered or in the event of a power failure. With the aid of the Power-Assist function, the system meets the requirements of the European standard EN 1154 and provides barrier-free access during standard operation. However, it is not possible to use the system in conjunction with the Push & Go function or the wind load control as these functions may affect the easy manual opening of the door. 13 dormakaba ED 100, ED 250 Covers The covers are packed separately from the operator system, which makes it easy to select the respectively required cover. dormakaba provides covers for single and double systems. All covers are designed for on-site mounting. They are furthermore suitable for both the ED 100 and the ED 250 version. When creating double systems, the four-position internal program switch has to be replaced by a three-position switch, which means that the exit only function is only available in combination with the external program switch. Double-leaf systems are required for doors where the clearance between the hinges exceeds 1,400 mm (1,450 mm with ESR). ED BASIC cover Aluminum cover for single swing door systems ED BASIC RM cover Aluminum cover for single swing door systems Color ED BASIC cover silver white special color ED BASIC RM cover with integrated smoke detector RM-ED silver white special color Order No. 29241001 29241002 29241003 29241011 29241012 29241013 ED VARIO cover BASIC cover VARIO cover L BASIC cover ED VARIO RM cover with integrated smoke detector (color: silver) L This aluminum cover is designed to create a continuous cover for double swing door systems. In addition to the VARIO cover, you will require two ED BASIC covers, which are mounted on the right and on the left of the operator system. The ED VARIO cover is designed to hide the gap between the two covers and may be sawed to the appropriate size on site. With the aid of the VARIO cover, you may also increase the length of single-leaf operator. The cover may be installed on the left or on the right side and can be sawed to the appropriate size on site. The VARIO cover is silver-colored and available in two versions. ED PROFESSIONAL cover Number of door leaves Dimensions Type of cover single version 800 mm 1,600 mm 2,200 mm single version with integrated smoke detector 900 mm 1,600 mm 2,200 mm double version 1,500 mm 2,200 mm 2,200 mm 1,500 mm 3,200 mm 3,200 mm double version with integrated smoke detector 1,610 mm 2,200 mm 2,200 mm 1,610 mm 3,200 mm 3,200 mm Order No. 29242001 29242011 29242001 29242002 29242011 29242021 This aluminum cover is designed to create double-leaf swing door systems. The ED PROFESSIONAL cover is a continuous and seamless cover and available in lengths from 1,400 mm (1,450 mm with ESR) to 3,200 mm. With the PROFESSIONAL cover, also single operator may be extended to a length of up to 3,000 mm towards the main closing edge. ED PROFESSIONAL cover Color silver special color 14 Order No. 29243001 29243003 Arms ED slide channel set ED 100 and ED 250: For reveal depths +/ 30 mm ED slide channel set CPD ED 100 and ED 250: For reveal depths 30 - 60 mm ED standard arm 225 ED 100 and ED 250: For reveal depths 0 225 mm EN 7: For max. reveal depths 125 mm Mounting version Pull- and push-version Color silver white special color Mounting version Pull-version Color silver white special color Mounting version Push-version Color silver white special color ED standard arm 500 Mounting version Push-version ED 100: For reveal depths 226 300 mm ED 250: For reveal depths 226 300 mm und 400 kg, for reveal depths 301 500 mm und 160 kg Color silver white special color ED axle extensions The axle extensions 20, 30 and 60 mm are suitable for all arm versions of the ED 100 & ED 250. The axle extensions 90 mm is only suitable for all arm versions of the ED 250. ED axle extension 20 mm 30 mm The axle extensions are available in chromated black. 60 mm 90 mm Decorative foil for covering the axle extension without illustration Glass door bracket for ED Foils are available to cover the galvanised ED axle extensions. Color silver white black For fixing the slide channel to toughened glass doors (with 10 to 13 mm glass thickness). Order No. 29275021 29275022 29275023 Order No. 29276021 29276022 29276023 Order No. 29271021 29271022 29271023 Order No. 29272021 29272022 29272023 Order No. 29278012 29278013 29278016 29278019 Order No. 29278500 29278501 29278502 Order No. 29275030 15 dormakaba ED 100, ED 250 dormakaba Upgrade Cards dormakaba Upgrade Cards are designed to increase the functional range of our swing door operators. The installation of the cards is very easy: Just insert the respective Upgrade Card into the proper slot at the control unit and the software will be transferred automatically. dormakaba offers different Upgrade Cards, which may either be combined or installed as individual components. Please note that the respective function of the Upgrade Card is only available as long as the card is connected to the control unit. Upgrade Card Full-Energy blue All operators are supplied as Low-Energy version, which means that the adjustable opening and closing speed range is restricted to a certain limit. The respective limits depend on the prevailing door-leaf width and door-leaf weight and may vary between 1° and 27° per second. These limits furthermore comply with DIN 18650 and EN 16005 (German Industrial Standard), ANSI 156.19 (American Standard) and BS 7036 (British Standard). Depending on their field of application, such swing door operator might not require safety sensors when operated in Low-Energy Mode. If you need a higher driving speed, you will require the respective Full-Energy Upgrade Card. The driving speed may then be increased to a maximum of 50°/second with the ED 100 and to 60°/second with the ED 250. In this case the swing path has to be monitored by safety sensors (mounted onto the door leaf). Full-Energy 120 kg 100 kg 50 kg Low-Energy 0 750 mm 850 mm 950 mm 1100 mm 1250 mm Recommended weight/dimensions for the installation of the Full-Energy Upgrade Card ED Upgrade Card Full-Energy Color ED 100 ED 250 blue blue/ transparent Order No. 29251022 29251020 Upgrade Card Fire Protection ED 100 red When the ED 100 is installed on fire doors with hold open requeirents and a stand alone smoke detector, the Upgrade Card Fire Protection is required for compliance with the guidelines for hold-open devices. Apart from its smoke detector connection (as monitored current loop), the card also offers a manual reset function (by opening the door), a full-energy function and the system may be triggered at the door leaf. Thanks to the card's integrated full-energy function, no additional Full-Energy Upgrade Card is required. Manual reset by opening the door A triggered hold-open system has to be reactivated manually. As soon as the function has been activated, it suffices to open the door until it has almost reached the adjusted opening width. ED Upgrade Card Fire Protection ED 100 ED 250 Triggering at door leaf It must be possible to trigger a hold-open device manually in order to close the door. With ED 100 & ED 250, users may deactivate the hold-open function by a slight push against the door leaf. So no pushbutton is required to trigger a closing cycle; however, it is still available as an option. 16 Color red red/ transparent Order No. 29252022 29252020 Upgrade Cards Upgrade Card Professional The Upgrade Card Professional provides functions for swing door operators that used to be realized with the aid of external components. Extended hold-open time of 180 s The hold-open time of up to 30 seconds, which is already integrated in the basic system, is sufficient for most applications. However, an extended hold-open time of up to 180 seconds may easily be realized with the aid of the Full-Energy Upgrade Card. Flip-Flop function In standard mode, the operator opens the door after a Night-/Bank pulse has been triggered (via the key switch) and closes it on expiry of the hold-open time. When the flip-flop function is activated, the door opens and remains in PERMANENT OPEN position as soon as the Night-/Bank function is triggered at the respective input. The door will close when the Night-/Bank function is activated again. The hold-open period in PERMANENT OPEN position is not limited, and the standard hold-open time is available at all other activator inputs. Please note that smoke detectors always have priority to the PERMANENT OPEN function. Color ED Upgrade Card Professional green ED 100 & ED 250 Nurse-Bed function (only for double-leaf door systems) As soon as a pulse is triggered, both door leaves of the double-leaf system will open. Sometimes this may not be necessary, as the full passage width is not required. Whenever this is the case, the nurse-bed function is perfectly suitable to control the two door leaves separately. The activator that is connected to the external detector only institutes the active door leaf to open. The resulting passage width is sufficiently big to allow people to use the door. The other activator (the one that is connected to the internal detector) is used to open the door to the full opening width. In this case, both door leaves open so that the full passage width is accessible. This function reduces the energy consumption and may help to avoid draughts and thus heat loss. Order No. 29253001 Upgrade Card DCW® The Upgrade Card DCW® provides the operator with a DCW® Bus connection. The integrated DCW® operator supports the following accessory: Emergency exit motor lock with self-locking action SVP DCW® The required procedure is controlled by the operator while the operator and the motor lock communicate via the DCW® bus. ST 32 DCW® The key switch to trigger the Night-/Bank function is suitable for application as activator outside the secured area (if you turn the key clockwise). When the key switch is used in conjunction with the DCW® program switch: the program switch is adjusted to OFF by turning the key counter-clockwise in order to deny access after closing of business or during work breaks. Turn the key to the right for more than 3 seconds in order to trigger the AUTOMATIC function.* ED Upgrade Card DCW® ED 100 & ED 250 Color yellow * Depending on regional standards, provisions and regulations regarding the safeguarding of buildings, further measures to shut off the building may be required. Order No. 29254001 17 dormakaba ED 100, ED 250 Upgrade Card barrier-free toilet With the aid of the Upgrade Card, the required special functions are allocated to the in- and outputs of the control unit to facilitate the connection of the respective components. System overview The system requires an electric strike, a motor lock or similar devices to keep the door closed. Furthermore, the door is equipped with a lever handle on the inside and a knob on the outside so that the door may only be opened from the inside and the outside with the corresponding key. In addition, large-surface pushbuttons are installed on the inside and on the outside of the toilet while a status indicator (vacant/occupied) on the outside and an occupied light indicator on the inside of the toilet indicate the current status. As an option, we provide an emergency pushbutton (to be mounted on the outside), which allows to open the door immediately in the event of an emergency. Please note that dormakaba recommends connecting the barrierfree toilet to an additional emergency call system (by others). Entering the barrier-free toilet While the toilet is vacant, the status indicator on the outside is green. Use the pushbutton on the outside to trigger an automatic opening cycle. The door will close automatically on expiry of the adjusted hold-open time. As soon as the door is fully closed, users may deactivate the external pushbutton via the pushbutton on the inside so that the door is no longer accessible from the outside. At the same time, the external status indicator switches from green to red in order to indicate that the toilet is occupied. Also the internal status indicator turns red to show the user inside the toilet that the door is now locked. Upgrade Card Barrier-Free Toilet Leaving the barrier-free toilet Users may open the door either automatically via the internal pushbutton or manually by using the lever handle. At the same time, the system emits a 24 V DC message, which may be used to flush the toilet automatically. The door closes on expiry of the adjusted hold-open time. The status indicator on the inside and on the outside switches from red to green as soon as the door has reached its "closed" position. Emergency opening from the outside The system is ready for connection of an emergency pushbutton so that, in the event of an emergency, users may deactivate the locking function and the door can only be opened by hand. In this case the door not longer operates automatically. As an alternative, the door may be opened with the aid of a key from the outside (in the event of an emergency). In both cases, the status indicator on the outside switches from red to green and the light indicator on the inside goes out. 18 Order No. 29253002 Hold open device application for fire doors Functional characteristics 044 505 044 05 5 In the event of a fire, the ceiling- mounted or lintel-mounted smoke 033 03 detectors detect emitted smoke and 011 ED 100 deactivate the automatic opening of the door. In this case, the operator will ED 100 01 close the door via the integrated spring and can no longer open it automatically. Apart from the automatic activation via smoke detector, the system may also be triggered manually via the optional 066 manual release pushbutton or when the door is closed by hand. In order to 066 reactivate the system, the door has to be opened manually. 01 ED 100/ED 250 02 ED 100/ED 250 with continuous cover 03 RM-ED smoke detector with own casing or integrated RM-ED lintel-mounted smoke detector 378 30 04 RM-N smoke detector, opposite hinge side 05 RM-N smoke detector, hinge side 06 Optional manual release pushbutton "Tür zu" (German for "close door") Color Order No. 80 45 34 357,5 Smoke detector RM integrated RM-ED silver white special color Color 64840001 64840011 64840009 Order No. RM-N ceiling-mounted smoke detector Ø 100 HT manual release pushbutton Tür schließen 80 12,5 RM-ED integrated* 2 x RM-N Color white Flush-mounted version Box for surface-mounting for HT (No picture) Color white white Order No. 64830900 Order No. 19144601175 05158533332 ESR Integrated door coordinator The ESR set is installed inside the double-leaf operator on site. It is available as individual component and easy to install. The system works similar to a drum brake and thereby ensures the proper functioning of the system. Its brake works on the motor shaft of the operator on the active door leaf and transfers the switching signal via a shaft. The system does not require any maintenance. ED ESR set Order No. 29261001 *Components are included in cover, order no. please refer to page 14 19 dormakaba ED 100, ED 250 Wiring diagrams ED 100 & ED 250 single doors 15 4 x 0.8 2 x 0.8 14 6 x 0.8 4 x 0.8 ED 100/ED 250 12 4 x 0.8 16 NYM 3 x 1.5 mm 2 4 x 0.8 2 x 0.8 2 x 0.8 4 x 0.8 4 x 0.8 8 x 0.8 4 x 0.8 2 x 0.8 17 08 03 02 06 07 09 10 05 04 11 10 A 01 L1 N PE ED 100 & ED 250 double doors 15 4 x 0.8 2 x 0.8 14 6 x 0.8 2 x 0.8 13 2 x 0.8 ED 100/ED 250 08 4 x 0.8 08 16 NYM 3 x 1.5 mm2 03 4 x 0.8 2 x 0.8 2 x 0.8 4 x 0.8 4 x 0.8 8 x 0.8 4 x 0.8 2 x 0.8 17 02 06 07 09 10 05 04 11 10 A 01 L1 N PE Connections 01 Power supply 02 Emergency pushbutton, function: Emergency Off 03 Two-pole-and-earth socket 04 External PGS, mechanical 05 External PGS, electronic 06 Pushbutton, inside 07 Pushbutton, outside 08 Locking device 09 Radar motion detector, inside 10 Radar motion detector, outside 11 Key switch 12 ED 100/ED 250 13 ED 100/ED 250 with continuous cover 14 RM-ED smoke detector* 15 RM-N smoke detector, opposite hinge side 16 RM-N smoke detector, hinge side 17 Optional manual release pushbutton "Tür zu" (German for "close door") 18 Red-green-display inside 19 Red-green display outside *not necessary with integrated smoke detector ED 100 & ED 250 single doors, barrier-free toilet 12 03 08 02 06 19 07 18 01 20 Program switches External program switches are available in different designs and have been conceived for all kinds of demands. They offer various options, from a mechanical to a full-electronic version, alternatively also lockable via profile half-cylinder or in a full-electronic way via code. These switches are designed to replace the internal program switch. Mechanical Program switch 4-position, aluminum, flush-mounted version Box for surface-mounting Color white, Gira S-Color Order No. 19135404150 5080531332 Mechanical and lockable Program switch Color 4-position, lockable, aluminum, flush-mounted version Box for surface-mounting white, Gira S-Color Order No. 19135604150 5080531332 Electronic EPS-D EPS-D DCW® Full-electronic Program switch Color ... control up to 5 different functions of the automatic door: Off, automatic, exit only (closing time), partial open (1-panel opening in case of 2-panel doors), permanent open. Electronically operated via push buttons. Lockable via numerical code or an additional key switch. DCW® model can be controlled centrally, e.g. from a PC, function display is simultaneously visualized on the program switch. System 55, flush-mounted EPS-D white EPS-D DCW® white Box for surface-mounting Order No. 16557001150 16577301150 5158533332 21 dormakaba ED 100, ED 250 Pushbuttons Pushbutton 80 80 12,5 Color Order No. Single-pole changeover contact, standard frame, flush-mounted version, System 55 white 19144701170 Key switches KT 3-1 surface-mounted version/flush-mounted version 75 Flush-mounted 45 version 17 9 75 75 45 Surfacemounted version Ø 59 9 50 60 UP-Version Key switches ST 32 DCW® PG 13,5 AP-Version 50 60 UP-Version 17 9 10 10 40 Ø 59 9 1 NO contact, with profile half-cylinder (may be replaced by10any standard profile half-cylinder)1,0key only r4e0tractable in neutral position, aluminum, metal, 75 x 75 x 60 mm PG 13,5 AP-Version KT 3-1 flush-mounted version KT 3-1 surface-mounted version Order No. 05054531332 05054631332 Order No. CT 4/1 code keypad as control for locking devices (keypad and electronic module have to be combined) The code keypad does not require optional software for simple access authorizations. The water resistant metal keypad is also suitable for installation in the exterior of a building. Thanks to Plug & Play, the 4- or 6-digit code may be changed directly with the aid of the keypad. The respective control unit is installed within the security zone and may be connected to all dormakaba operators. Surface-mounted version, 230 V/50 Hz, 1.5 V A, 1 x UM potential-free relay contact 8 A, 250 V, connections: max. 2.5 mm, 75 x 75 x 11.5 mm Tamper-proof key switch with LED display (red/ green), silver-colored LM housing with front plate, suitable for surface-mounted and flush-mounted installation, for controlling the door management system TMS. Adjustable and restrictable functions of the key switch ST 3x DCW® can be programmed via the parameterization software, TMS Soft. Connection to the door management system TMS via DCW® system bus. Protection class IP 54. Dimensions (W x H x D) (approx.): Housing: 75 x 75 x 50 mm Front plate (flush-mounted installation): 90 x 100 x 2 mm. 56343200 Color MTB 4/1 metal keypad to enter the activation code (to open the door) and for programming purposes, surface-mounted version 75 x 75 x 11.5 mm EB 4/1 Electronic module, incl. 2 m connection cable, plastic cover, surface-mounted version black Order No. 05079331332 05063431332 22 Pushbuttons (elbow) Large-sized pushbutton (elbow) 80 30 6.5 Flush-mounted version/ surface-mounted version, 304 x 80 mm Color silver-colored Order No. 90410015 40 304 209 254 274 40 20 40 169 79 17 4.8 Surface-mounted version, flat design, plastic, 209 x 79 x 17 mm Color grey Order No. 05080231332 Large-sized pushbuttons 44 82 surface-mounted version 11 39.5 Ø 71 Large-sized pushbuttons Color With box for flush-mounting, without switch pad, incl. switch, 224 x 82 mm With box for surface-mounting, without switch pad, incl. switch, 224 x 82 x 44 mm silver-colored silver-colored Order No. 05095531332 05095231332 Switch pad Stainless-steel, suitable for surface-mounted version/ flush-mounted version, 214 x 70 mm Stainless-steel, suitable for surface-mounted version/ flush-mounted version, 214 x 70 mm, lettering "Tür auf" (German for "open door") (No picture) Order No. 05095431332 05095331332 23 dormakaba ED 100, ED 250 Stainless steel buttons Switch pad stainless steel neutral, for System 55 Color silver Order No. 16717501170 Switch pad stainless steel symbol "Wheelchair" for System 55 Color silver Switch pad stainless steel, symbol "door on" for System 55 Color silver Switch pad stainless steel symbol "on/locked" for system 55 Color silver Switch pad stainless steel symbol partial opening for System 55 Color silver Color Switch pad stainless steel symbol "permanent open" for System 55 silver Switch pad stainless steel symbol "Automatic" for System 55 Color silver Order No. 16717701170 Order No. 16717601170 Order No. 16718101170 Order No. 16718001170 Order No. 16717901170 Order No. 16717801170 24 Framework program for System 55 push buttons Color Status Display red-green to Display the status of the door system 24 V rot/grün Order No. 16713401170 Sealing set IP 44 for stainless steel push button system 55 Order No. 05214633332 Centre insert suitable for System 21 and System 55, concealed Order No. 05157633332 Cover frame Single for stainless steel buttons Cover frame Double for stainless steel buttons Cover frame Triple for stainless steel buttons Cover frame Quadruple for stainless steel buttons Order No. 05214233332 Order No. 05214333332 Order No. 05214433332 Order No. 05214533332 25 dormakaba ED 100, ED 250 BRC remote system The new BRC system operates with a bi-directional BidCoS wireless protocol. In contrast to unidirectional systems, the receiver sends a message to the hand-held transmitter that the signal has been received. The hand-held transmitter indicates the prevailing status via a LED. Thus a short keystroke is enough to trigger an opening pulse in a reliable way within the system's typical field range of 100 meters. The BRC-W and BRC-T transmitters are also of bi-directional design; however, the status indicator is not visible as the transmitters are integrated in pushbuttons. BRC-R The BRC-R radio receiver may easily be installed inside the operator as its size is adapted to the available space. Simply fix it on the motor-gear-unit with two screws. We offer three different types of transmitters. Up to 1024 transmitters may be allocated to a BRC-R. BRC-W BRC-H 3 BRC-T 26 Receiver Order No. 29302002 The battery-operated wall-mounted transmitter can easily be glued or screwed to the wall. The push button can also be installed without the frame into existing switch series System 55. Suitable for the interior under lighter conditions. Wall transmitter required battery type: 2 x 1.5 V LR03 (AAA) Order No. 29301005 Bidirectional hand-held transmitter BRC-H, battery-operated, 4 channels, LED for feedback purposes, shockproofdesign. Hand-held transmitter required battery type: 1 x 1.5 V LR03 (AAA) Order No. 29304001 Battery-operated transmitter, designed for installation into a pushbutton with deep box for flush-mounting or into a surface-mounted large-sized pushbutton. In connection with the dormakaba stainless-steel large-sized pushbutton it is also suitable for heavier conditions. Battery-operated transmitter Order No. 29301003 Motion detectors Motion detectors Accessories Designation Specification Prosecure Easy Motion Mono Full-automatic access on pulse activation; adjustable inclination angle, inclined field of view and field size, LED status indicator, not in accordance with EN 16005 Ambient temperature 20 °C to 60 °C Prosecure Easy Motion Stereo Adjustable inclination angle, inclined field of view and field size, direction recognition, cross-traffic suppression, immunity, LED status indicator, not in accordance with EN 16005 Ambient temperature 20 °C to 60 °C Prosecure Opti Motion Mono Adjustable inclination angle, inclined field of view and field size, direction recognition, immunity, LED status indicator Ambient temperature 20 °C to 60 °C Prosecure Opti Motion Stereo Adjustable inclination angle, inclined field of view and field size, direction recognition, cross-traffic suppression, Slow Motion function, immunity, LED status indicator Ambient temperature 20 °C to 60 °C Designation Specification Rain protection cover For Easy Motion detectors Color Order No. black silver colored white 86001000 86002000 86003000 black silver colored white 86011000 86012000 86013000 black silver colored white 86101000 86102000 86103000 black silver colored white 86111000 86112000 86113000 Order No. 86031900 Rain protection cover/ ceiling angle bracket For Opti Motion detectors 86131900 Prosecure Remote Control Remote control for programming Prosecure Opti Motion detectors or products from other brands, for the convenient and exact adjustment of high-mounted sensors, self-explaining menu navigation, LCD display, ambient temperature -20 °C to 60 °C 86991900 CleanSwitch contactless radar push-button, System 55, flush-mounted, detection zone adjustable 10 - 50 cm, dimensions: 80 x 80 x 40 mm, switch insert 55 x 55 mm, colour: white neutral wheelchair door open 16737401170 16737501170 16737601170 27 dormakaba ED 100, ED 250 Safety Sensors Safety Reversing Stop Safety sensors are contact-free protection devices which are mounted to the door panel and designed to monitor the swivel range. The sensors can detect static as well as moving objects and the automatic swing door operator reacts accordingly to prevent a collision with the object. When the door closes and the sensor detects an object on the closing side (opposite hinge side), the door will reverse and open again. The hold-open time will start over. The sensor can also be used as an activator on the closing side. On the opening side (hinge side), the automatic opening movement will be stopped if the sensor detects an object. As soon as the set hold-open time has expired, the door will close again. There are sensors with various technologies available that can be connected to the automatic swing door operators ED 100 and ED 250. Depending on the application, the automatic swing door operators ED 100 and ED 250 can be operated without safety sensors in the low-energy mode (low energy operation). However, safety sensors can additionally be used in the low energy mode if a contact with the door is not desired. Safety sensors have to be used in the full-energy mode. 28 Safety sensors with infrared technology Safety sensors The Prosecure Opti Save and IRS-4 are safety sensors based on infrared technology to safeguard the swivel range of automated swing doors in accordance with DIN18650/EN16005. The sensors are installed inside an aluminum profile in the upper area of the door. The resolution of the infrared sensors is typically 10 measurement points per meter of door width. Depending on the size of the door, a different number of sensors will be required. The maximum assembly height for Prosecure Opti Safe is 3.5m, for IRS 4 3.0 m, the maximum door panel width in each case is 1.6 m. The detection field can be easily adjusted so that the grey zone in which the detection is no longer possible due to the physical limits of the technology does usually not exceed 20 cm. In case of infrared-optical sensors, the quality of the swivel range monitoring depends in each case on the characteristics of the floor. Both options allow you to guard both normal floors and floors with low reflectance, grates or dirt-trap mats that are usually difficult to detect. If a door opens against a wall, the wall will be suppressed during the operation by the operator depending on the opening angle. If fixed installations such as handle bars are continuously within the detection range, the sensor modules must be adjusted so that the installed objects do not interfere with the detection. A sufficient safeguarding of the swivel range can be achieved by adjusting the detection field. Depending on the risk potential that can be deduced from the risk assessment, the secondary closing edge must be protected by further measures. Safety sensor Prosecure Opti Safe incl. 2.5 m connecting cable and transition tube (dimensions: HxD 44 mm x 38 mm) Description black silver white special color Prosecure Opti Safe 700 Prosecure Opti Safe 900 Prosecure Opti Safe 1200 Prosecure Opti Safe 1600 2 sensor bars with 1 transmitter & 1 receiver module each, length 700 mm 2 sensor bars with 1 transmitter & 1 receiver module each, length 900 mm 2 sensor bars with 1 transmitter & 1 receiver module each, length 1200 mm 2 sensor bars with 2 transmitters & 2 receiver modules each, length 1600 mm 86501070 86502070 86505070 86504070 86501090 86502090 86505090 86504090 86501120 86502120 86505120 86504120 86501160 86502160 86505160 86504160 Safety sensor IRS-4 incl. 2.5 m connecting cable and transition tube (dimensions: HxD 47 mm x 45 mm) Description IRS-4 350 IRS-4 1200 IRS-4 1600 1 sensor bar with 1 combined transmitter / receiver module, length 350 mm 1 sensor bar with 2 combined transmitter / receiver modules, length 1200 mm 1 sensor bar with 3 combined transmitter / receiver modules, length 1600 mm silver 294350 294110 294160 white 294343 294113 294163 special color 294351 294111 294161 29 dormakaba ED 100, ED 250 Safety sensors with laser technology The Flatscan SW is a safety sensor based on laser technology to safeguard the swivel range of automated swing doors in accordance with DIN18650/EN16005. The sensors are installed in the upper corner area of the door. The resolution of the sensor is 70 measurement points for the swivel range and 100 measurement points for the secondary closing edge. A single sensor module on each side is sufficient to safeguard the entire door up to a diagonal of 4 m. The detection field of the sensor can be precisely adjusted so that the grey zone on the floor in which the detection is no longer possible due to the physical limits of the technology usually does not exceed 10 cm. The floor characteristics do not influence the sensor. The strength of the system becomes evident when difficult to capture floors with grates and grooves or shiny coats are involved. If the door opens against a wall or if a fixed installation such as handle bars is continuously within the detection range, the sensor will detect them during the teach-in operation and automatically suppresses them during the operation without affecting the detection quality. The wall suppression of the operator can be used additionally. A sufficient safeguarding of the swivel range can be achieved by adjusting the detection field. During the movement of the door, the detection field can even be dynamically expanded beyond the door panel and thus increase the operational reliability. In addition, the sensor offers a significantly improved protection on the secondary closing edge. Compared to the standard infrared sensors and depending on the risk potential deduced from the risk assessment, this can be sufficient to safeguard the secondary closing edge. You may take other additional measures to safeguard the secondary closing edge. Safety sensor Flatscan SW incl. 2.5 m connecting cable and transition tube (dimensions: WxHxD 142 mm x 85 mm x 23 mm, mounting base 7 mm) Description black silver Flatscan Kit Flatscan left Flatscan right 1 sensor DIN left & 1 sensor DIN right 1 sensor DIN left 1 sensor DIN right 86501300 86501301 86501302 86502300 86502301 86502302 white 86503300 86503301 86503302 30 Further accessories Red-green display Emergency power supply unit MTD 700 The red-green display indicates the status of the door system. The extravagant, semicircular designer light indicator is made of acryl, manufactured according to the latest LED technology and equipped with a high-grade LED display (24 V, brilliancy according to DIN VDE 0834, part 1). Its light signals are visible from both sides and the front even from a large distance. Light indicator, 24 V DC, LED display (red, green, white). Order No. 05111631332 In order to offer the visitors of a building a high degree of safety, the existing door systems must remain fully functional even in case of a power failure. This is ensured by MTD 700 , the system for the emergency power supply. Depending on the features, the operation can be maintained to up to one hour. In the meantime, the entire door system will be supplied with emergency power. There is therefore sufficient time available for taking counter measures and to protect the building. Emergency power supply MTD 700 230 V AC, output: 700 VA, scope of delivery incl. 1 x relay card for fault messages Dimensions (W x H x D): 238 x 160 x 360 mm Color: black Order No. 5013632332 31 Door Hardware Entrance Systems Electronic Access & Data Interior Glass Systems Mechanical Key Systems Safe Locks Lodging Systems Service dormakaba Australia - Head Office 12-13 Dansu Ct 3803 Hallam Australia T. 1800 675 411 F. +61 (3) 8795 0280 info.au@dormakaba.co http://www.dormakaba.com.au dormakaba New Zealand - Head Office Building P 61-69 Patiki Road 1026 Avondale/Auckland New Zealand T: 0800 436 762 F. 09 83 2052 E: info.nz@dormakaba.com http://www.dormakaba.com.au WN X05X3X7X41X5X1X53X2X,X12X,/2X1X/19, Produkt, EN, X, JP/XXXXX, XX/19 Subject to change without noticeAdobe InDesign 16.4 (Windows) Adobe PDF Library 16.0