If the sim card is in arrears and cannot work normally, causing the device to fail to connect to the network, the device will display offline. Troubleshooting ...
The device cannot be displayed on the platform, please follow the steps below to check and set. Device DNS server address. DNS1 tracker.baanooliot.com 8090.
Device Offline Troubleshooting Guide The device cannot be displayed on the platform, please follow the steps below to check and set DNS1 DNS2 Device DNS server address tracker.baanooliot.com 8090 tracker.baanool.net 8090 1. Check if the sim can work normally If the sim card is in arrears and cannot work normally, causing the device to fail to connect to the network, the device will display offline. Troubleshooting method Insert the sim into the mobile phone to check the call charge and Internet function. 2. Check the device status information through the check command Send the status query SMS command check+password to check whether the DNS, APN, and APN account password is correct DNS ERROR :Check whether the dns is completely consistent with any one of "DNS1" and "DNS2". If it is inconsistent, it means that the dns setting is wrong, and the following settings are required Set DNS SMS command: dns+password tracker.baanool.net 8090 Device replydns success! Example: dns123456 tracker.baanool.net 8090 Note: Send SMS command "dns123456 tracker.baanool.net 8090" and you will receive "dns success!" after setting successfully.(123456 is password, tracker.baanool.net is DNS, 8090 is port) Remarks: If you do not receive a "dns success" SMS reply after setting through dns, it means that it is a very old machine, please use the following command to reset Command: adminip+password 192.200.110.242 8090 Example: adminip123456 192.200.110.242 8090 APN ERROR : The APN needs to be set to the APN of the local operator, and the APN of different operators in different countries is different. To know the APN of the SIM card you are using, please consult your local network operator. Set APN SMS commandAPN+password+space+local APN Device replyAPN ok Example: APN123456 CMNET Set APN account and password In most countries, user name and password can be omitted during GPRS login, and this step can be skipped. For countries where a user name and password are to be used, the following settings are required. SMS command: up+password+space+username+space+password Device replyuser, password ok! Example:up123456 Jonnes 666666 Note: 123456 is the password, Jonnes is the user name, and 666666 is the GPRS password. 3. Turn on GPRS mode SMS command: Gprs+password,0,0 The device replies: Gprs ok!, indicating that it has switched to GPRS mode. Example: Gprs123456,0,0 4. If the above settings are invalid, you can send the command "begin+password" to the terminal, it will reply "begin ok" and return to the default factory settings.WPS 文字