Kukirin G4 Electric Scooter User Manual

Thank you for purchasing the Kukirin G4 electric scooter. To ensure your safety and the safety of others, please read the instructions carefully before use. There may be minor differences between the product and the pictures. Please refer to the actual product. The final explanation right belongs to our company.

Catalogue

• 1. Basic Information
  • 1.1 Important Information
  • 1.2 Security Alert
  • 1.3 Waste Disposal
  • 1.4 Product Standard
• 2. Product Introduction
  • 2.1 Packing List
  • 2.2 Kukirin G4 Schematic
  • 2.3 Button Information
  • 2.4 Display Information
• 3. Assemble and Fold Electric Scooters
  • 3.1 Handlebar Mounting
  • 3.2 Rear Fender Assembly
  • 3.3 How to Use Foot Brace
  • 3.4 Fold and Unfold the Electric Scooter
• 4. Use of Batteries
  • 4.1 How to Charge
  • 4.2 Battery Standard
• 5. Scooter Used
  • 5.1 Teaching Cycling
  • 5.2 Practical Guide
• 6. Clean and Maintain
  • 6.1 Cleaning
  • 6.2 Storing
  • 6.3 Transport
• 7. After Sale

Chapter 1: Basic Information

This manual includes the function, use, and maintenance of the Kukirin G4. Please have your purchase information ready before contacting customer service.

Purchase Data:

Scooter Code: (on the bottom of the scooter)

? Please comply with the requirements of this guidance note.

1.1 Important Information

You must obey local laws and regulations when riding an electric scooter. Users must take their own risks and responsibilities, which include but are not limited to abrasions, muscle injuries, fractures, lacerations, serious injuries, and deaths that may be associated with electric scooter riding.

? Be sure to wear protective gear (helmet, elbow pads, knee pads, gloves, etc.) when riding.

1.2 Security Alert

• ? Please handle the packaging safely as it is dangerous for children and pets.
• ? Please check the integrity of the product. If any parts are missing, please contact the seller.
• ? Do not use if damaged.
• ? Please use the standard original charger.
• ? If your child rides an electric scooter, someone needs to look after them.
• ? Only the original parts of our company are used.
• ? Be careful with electricity. Do not let water or liquid touch this product. There is a risk of electricity leakage.
• ? When cleaning products, remove dust with a dry cloth; please do not use water to wash directly.
• ? Do not immerse the product or any of its parts or accessories in water.
• ? Do not use on stairs.
• ? Electric scooters can only be used by one person.
• ? Please cover the product to prevent dust when not in use for a long time. Do not store it in a dusty environment as it may cause damage.
• ? Do not drive in dangerous areas.

1.3 Waste Disposal

Please do not burn, bury, or throw away the electric scooter with domestic garbage. If the battery is damaged or replaced, it will cause danger and environmental pollution. Please follow the relevant rules and handle it carefully.

1.4 Product Standard

Chapter 2: Product Introduction

2.1 Packing List

• Kukirin G4 e-scooter x1
• Charger x1
• Instruction x1
• Loading kit x1

2.2 Kukirin G4 Schematic

Diagram Description: The schematic shows the various parts of the Kukirin G4 electric scooter labeled with numbers 1 through 29. Key components include the handlebar (1-3), accelerator (4), power button (5), spotlight (6), monitor (9), upright pole (10), front wheel (14), front disc brake (16), rear wheel (23), rear disc brake (22), and kickstand (29).

Component List:

1. Handlebar cover
2. Steering crossbar
3. Hand brake and bell
4. accelerator
5. Power button
6. spotlight
7. Handlebar base
8. Collect the streamer
9. monitor
10. Upright pole
11. Fold components
12. Front axle
13. Front rocker arm bracket
14. front wheel
15. Front rocker arm
16. Front disc brake
17. pedal
18. Pedal pad
19. DC IN
20. Rear rocker arm bracket
21. Rear rocker arm
22. Rear disc brake
23. rear wheel
24. Rear fender
25. Rear reflector
26. Taillight
27. Rear pedal
28. Rear foot pad
29. kickstand

Actual product details and specifications are subject to change without notice due to product upgrading and optimization.

2.3 Button Information

Before riding, understand the function keys and display meanings:

• 1 On/off button: Power-on/function combination key. Click to turn on the scooter in shutdown state. In power-on state, double-click to switch gear mode, click to briefly press the headlamp switch, and click again to turn off the scooter. Turn headlights on/off when the scooter is powered on.
• 2 Settings: Click to switch units (miles and kilometers). Press and hold to turn cruise control on/off.
• 3 Mode: Click to change the speed mode (1-2-3-1).
• 4 Lights: Click to turn on/off the headlights.

2.4 Display Information

Diagram Description: The display panel shows various indicators including speed, mode, battery level, and lights. The numbered indicators correspond to the following functions:

1. Constant speed cruise
2. Headlight status
3. Zero and non-zero modes
4. Gear mode - economy
5. Gear mode - sport
6. Gear mode - race
7. Low battery warning
8. Power
9. Total mileage
10. Pedestrian mode
11. Real-time speed
12. Bluetooth lock
13. Bluetooth link
14. mile
15. kilometre
16. Light switch
17. Gear mode adjustment button
18. Set button

? Please charge the electric scooter regularly. If it is not used for a long time, please keep the electric scooter with more than 60% power. If there is no power, please charge it in time. Battery protection problems caused by long-term power loss and over-discharge shall be borne by the user.

Chapter 3: Assemble and Fold Electric Scooters

Before assembling the scooter, ensure the power supply is turned off. Most parts are pre-assembled; some require assembly before riding.

3.1 Handlebar Installation

Diagram Description: The diagrams illustrate the handlebar assembly process. Arrows indicate the direction for adjusting the handlebar faucet assembly and tightening screws.

Assembly Steps:

1. Adjust the position of the handlebar faucet assembly according to the direction shown in the figure. When the brake handlebar is in advance, accelerate and dial in the right direction.
2. Align the mounting base of the faucet fixing seat with the riser and insert.
3. Adjust the direction and tighten with two screws on the left and right.

3.2 Rear Fender Installation

Diagram Description: The diagram shows the rear fender being attached to the scooter frame.

Assembly Steps:

1. Insert the rear fender mounting feet into the installation position of the left and right rear rocker arms.
2. Pay attention to the left and right directions, as shown in the figure, the reflector is in the right direction below.
3. Screw it down.

3.3 Electric Scooter Bracket

Find the bracket beside the pedal and push the bracket down.

Diagram Description: A diagram shows the side view of the scooter with an arrow indicating the bracket being pushed down.

3.4 Folding and Unfolding Electric Scooter

Folding Scooter:

1. Pull out the folding fuse first.
2. Press the folding latch.
3. Put down the upright pole.
4. Hang the receiving streamer to the bottom of the rear pedal tail lamp.

Expand the Scooter:

1. Take out the receiving streamer from the bottom of the tail pedal.
2. Push the upright pole upwards.
3. One click means the folding latch is in place.
4. Just check again whether it is back to normal.

Diagram Description: Diagrams illustrate the process of folding and unfolding the electric scooter, with numbered steps corresponding to the actions.

Loading Kit Contents:

• Tool kit
• M5 Allen wrench x2
• M4 Allen wrench x1
• M3 Allen wrench x1
• M6 stud screw x2
• M6 stud screw x1

Chapter 4: Battery Charging

? Please charge the scooter before use.

4.1 How to Charge

1. Turn the scooter around before starting charging.
2. Find the charging socket on the scooter body and insert the charger plug.
3. Please use the special charger for the scooter.
4. The charging indicator is red when charging.
5. The charging indicator is green after charging.

Important Charging Notes:

• ? If it is the first time to charge, please charge it for at least 12 hours before use.
• ? Under any circumstances, it is forbidden to use electric scooters while charging.
• ? Do not charge overtime. The standard charging time is about 12 hours (20Ah battery).
• ? The battery life and performance will decrease if the charging time is too long.
• ? In order to prolong the battery life, charge it at least once every two months.
• ? When not in use for a long time, please keep the battery of the electric scooter at least 60% of its power to prevent the battery from over-discharging.

4.2 Battery Standard

Chapter 5: Usage

Please read the following information before using the G4 electric scooter.

• ? You must wear helmets and other protective equipment when using electric scooters.
• The maximum load is less than 120 kg.
• Comply with local laws.
• ? The G4 electric scooter contains a motor. According to your local laws and regulations, it may be classified as a motor vehicle. Please refer to your local actual situation. It is your responsibility to comply with local regulations.

5.1 Cycling Teaching

Before learning, please wear your riding protective gear and helmet, and find an open and flat closed road section to learn. Please follow the steps below.

Step 1: Hold the handle with both hands, keep your foot on the pedal, and the other foot on the ground. Give the scooter an initial speed of starting (initial speed of 5km/h), and press the finger acceleration button on the right side.

Step 2: Look straight ahead and keep the balance of body and vehicle.

Step 3: Turn the handle with both hands. Turning to the right means turning right, and turning to the left means turning left.

Step 4: When you need to brake, you can brake by holding the mechanical hand brake on your left hand. When the speed drops and stops, keep balance with one foot on the ground.

? To turn off the power of the electric scooter, press and hold the power button for 3 to 5 seconds after a complete stop.

5.2 Practice Guide

Please practice riding until you can easily use all the scooter functions. See the following tips:

• Avoid passing any object that may stick or jam the wheel.
• Please wear sports shoes to maintain flexibility and stability.
• Keep practicing until you can easily get on, move forward, turn, stop, and get off.
• Smooth road conditions are preferred when riding.
• Do not ride on slopes, pedestrians, or obstacles until you are proficient in using the scooter.
• The weight is about 38 kg. Remember to fold the scooter before storing it.

? Users should strictly ride in accordance with traffic regulations. If there are special local laws and regulations, they should ride legally in accordance with local laws and regulations.

? The equipped lithium battery can be recharged at least 500 times and can generally reach over 500 times during normal use. There may be hazards when charging lithium batteries. Please charge them outdoors.

Chapter 6: Cleaning and Maintenance

6.1 Cleaning

After a long ride, you need to clean it to ensure that the electric scooter works well.

• ? Turn the scooter before cleaning.
• ? Wipe with a dry cloth.
• ? Avoid contact with liquids.
• ? Do not use alcohol and detergent.
• ? Do not spray liquid directly on any part of the scooter.

6.2 Storing

To store the G4 electric scooter, follow the instructions below:

• ? Please charge before storage.
• ? Recharge every two months.
• ? Cover with a dust cloth to prevent dust.
• ? Do not store it in a dusty or humid environment, otherwise it may cause damage.

6.3 Transport

Close and fold the scooter before moving, lifting, or transporting it (see section 3.5 for instructions). When lifting the entire scooter, please note that the weight of the scooter is about 38 kg.

Chapter 7: After Sales

The G4 electric scooter is warranted for one year under normal use and service conditions from the date of purchase. This warranty gives you specific legal rights, and you can also enjoy other rights according to local laws. The warranty period is one year from the date of purchase. If the product is repaired or replaced, the warranty period will not be extended. This warranty only covers product quality problems under normal use conditions during the warranty period.

Warranty does not include:

• (a) Transportation
• (b) storage
• (c) use
• (d) non-compliance with instructions
• (e) change
• (f) unauthorized repair
• (g) wear
• (h) accident

Statement: The company will not be responsible for the accidental use of this product, and its liability will not exceed the purchase price of this product under any circumstances.