boAt Airdopes 141 Neo

Package Contents

• 1x Pair of TWS Earbuds
• 1x Type-C Charging Cable
• 1x Charging Case
• 1x User Manual
• 2x Pair of Extra Earmuffs
• 1x Warranty Card
• 1x FAQ Card
• 1x Catalogue

Overview

CTC (Capacitive Touch Control) / Power Button

Diagram: A visual showing a pair of black TWS earbuds and their charging case. A number '1' points to the touch-sensitive control area on the top of one earbud.

Power On (First Time User)

Step 1: To switch the earbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside). Courtesy our IWP™ (Insta Wake N' Pair) technology, the earbuds power on automatically, get connected and enter the connection mode.

OR

Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 seconds to manually power on the earbuds.

Step 2: After powering on, the earbuds enter the Connection Mode, indicated by alternate red and blue LED flashes on the primary earbud and blue LED flashes once every 5 seconds on the secondary earbud.

Connection Mode

Step 3: Turn on the Bluetooth functionality on your phone/media device and scan.

Step 4: Search for 'Airdopes 141 Neo' and pair accordingly. Congratulations! Your earbuds are now connected successfully via Bluetooth.

Note:

• Pairing mode lasts for 3 minutes. If the pairing time is missed then you will need to reconnect the ear-buds and follow the above mentioned procedure.
• Airdopes 141 Neo remembers previously connected devices; once switched on, the ear-buds automatically reconnect to the previously connected devices.

Diagram: A stylized smartphone screen with Bluetooth enabled. The device list shows 'Airdopes 141 Neo' as available and connected. A hand icon is shown tapping the screen.

Quick Glance on Functionalities

• 3 Seconds: Long touch left CTC for 3 sec to activate voice assistant.
• 3 Seconds: Long touch both CTCs for 3 seconds to manually power on.
• 5 Seconds: Long touch both CTCs for 5 seconds to manually power off.
• 5 Tap: 5 tap the CTC/MFB on both the Earbuds to perform factory reset.

Diagram: A vertical timeline graphic. The first segment, labeled '3 Seconds', points to 'Long touch left CTC for 3 sec to activate voice assistant'. The second '3 Seconds' segment points to 'Long touch both CTCs for 3 seconds to manually power on'. The third '5 Seconds' segment points to 'Long touch both CTCs for 5 seconds to manually power off'. The final segment, labeled '5 Tap', points to '5 tap the CTC/MFB on both the Earbuds to perform factory reset'. An earbud graphic with 'CTC (Capacitive Touch Control)' is also shown.

Single Earbud Usage

Step 1: Please note that both the earbuds can be used in mono mode. Use Smart/Manual Power On for switching on the desired earbud.

Step 2: The selected earbud will automatically enter the connection mode indicated by red and blue LED flashes.

Step 3: Turn on Bluetooth on your phone/media device and search for 'Airdopes 141 Neo' to connect.

Notes:

• To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage.
• You cannot skip tracks or return to the previous tracks in Mono (single-earbud) mode.

Charging the Earbuds

Step 1: Please insert the earbuds back inside the charging case in correct orientation and close the lid.

Step 2: During charging, the earbuds LED indicator stays solid red.

Step 3: Once the earbuds get fully charged, the charging case automatically switches off to save power and earbuds red LED turns off.

Notes:

• When the earbuds' remaining battery is low, Red LED blinks 3 times when case lid gets opened.
• When the remaining earbuds' battery is between 30%-70%, blue LED blinks 3 times when the case lid gets opened.
• Before using the earbuds for the first time, it is recommended to fully charge the earbuds. Also, please keep the lid of the charging case closed while charging.

Charge the Case

Step: To charge the case, plug one end of the provided cable into the case and connect the other end to a computer/wall adapter/powerbank, etc.

Remaining Case Battery Indications

Case LED Indication When Earbuds are Getting Charged from the Case

This is to indicate that the earbuds are getting charged from the case (when case lid gets closed):

• CYAN for 5 seconds to indicate LEFT bud is charging from the Case.
• PURPLE for 5 seconds to indicate RIGHT bud is charging from the Case.
• If both are properly charged, BLUE for 5 seconds.

Basic Functions

• Voice Assistant: Long touch the left CTC for 3 seconds to activate default voice assistant.
• Answer Incoming Call: Single tap the CTC on either earbud to answer an incoming call.
• Hang Up/Reject Call: Double tap the CTC on either earbud to end / reject call.
• Play/Pause Music: Single tap either earbud's CTC to play or pause music.
• Next Track: When playing music, double tap the right earbud's CTC to skip to the next song.
• Previous Track: When playing music, double tap the left earbud's CTC to return to the previous song.

Note: Volume can only be controlled via the media device.

BEAST™ Mode

Long touch the right CTC for 3 seconds to switch to Low Latency mode, also known as the BEAST™ Mode. Once switched on, it gets notified via a sound prompt. Long touch the right CTC for 3 seconds once again, to turn it off and return to Music Mode.

Made for the Gamers - By Gamers, BEAST™ Mode reduces the latency significantly and improves the overall gaming experience.

ENx™ Tech

Our ENx™ tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls. One need not activate ENx™ as the mic is equipped with the same and activated by default. Deliver your voice without interruptions anywhere - traffic, railway stations, airports, work space; literally anywhere!

Voice Assistant

Step 1: Long touch the CTC on left earbud for 3 seconds to activate default smart voice assistant.

Step 2: The respective voice assistant screen pops up and you may place your commands at ease.

Tips: You may try the following commands:

• What is the weather?
• Play a song
• Set a reminder

Diagram: An illustration of a person speaking, with speech bubbles containing 'What is the weather?', 'Play a song', and 'Set a reminder' emanating from their mouth, directed towards an earbud.

Note: If the voice assistant doesn't get triggered, then the functionality has to be first enabled via your media device settings.

Smart Power Off

Step 1: After usage, remove both the earbuds from your ears.

Step 2: Place the earbuds back into the charging case in correct orientation and close the lid.

The earbuds automatically switch off (and enter charging mode).

Diagram: An illustration sequence. First, two earbuds are shown being removed from ears. An arrow points to the next stage where the earbuds are placed inside the open charging case.

Manual Power Off

Step 1: Long touch both CTCs for 5 seconds to manually power off the earbuds.

Step 2: Once the earbuds get turned off, place them back inside the case and close the lid.

Factory Reset

Perform the factory reset in case you feel any difficulty while operating your Airdopes.

NOTE: Before performing reset, clear 'Airdopes 141 Neo' from pairing device history by forgetting device.

Step 1: Take out both the earbuds from the case and tap 5 times on both the CTCs; red LED blinks quickly for 5 times on the earbuds.

Step 2: Place the earbuds inside the case and close the lid.

Step 3: After a few seconds take the earbuds out from the case and perform a fresh connection.

The reset functionality gets completed once all the above 3 steps are performed.

Congratulations! Your Airdopes 141 Neo has been Reset.

Diagram: An illustration showing earbuds being placed into a charging case.

Specifications

Charging Norms & Precautionary Guidelines

• Charger/Brick/Adapter: 5V 2A
• Cable/Wire: Standard Cable (35 strands @0.10mm diameter/strand)

Any other accessory can be paired up with the product as long as the specifications are as per above norms.

Warning

• Please follow the instructions to operate.
• Please don't use the ear-buds in extreme temperatures.
• Please don't use the product near water.
• Please keep the product away from heat sources, as the heat may damage it.
• Don't jam the ports such as charger port, LED port, etc.
• It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds' service life.

Advisable: The earbuds start at a 100% volume and it may need to be reduced when the earbuds are switched on at first. This can be done by using the phone / media device.