Lighthouse User Guide User Guide 23.04

Lighthouse User Guide

Susan Burgess, Opengear

Lighthouse User Guide - Opengear

ABOUTTHISUSERGUIDE ThisuserguidedescribeshowtouseLighthouseandiscurrentasof2023.04 Whenusingaminorrelease,theremayormaynotbeaspecificversionoftheuser

User Guide 23.04

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 403 Pages, 6.32MB

lighthouse user guide

User Guide 23.04
Download PDF

COPYRIGHT ©
Opengear Inc. 2023. All Rights Reserved.
Information in this document is subject to change without notice and does not represent a commitment on the part of Opengear. Opengear provides this document "as is," without warranty of any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or merchantability for a particular purpose.
Opengear may make improvements and/or changes in this manual or in the product (s) and/or the program(s) described in this manual at any time. This product could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes may be incorporated in new editions of the publication.

23.04.0

ABOUT THIS USER GUIDE
This user guide describes how to use Lighthouse and is current as of 2023.04 When using a minor release, there may or may not be a specific version of the user guide for that release. The current Lighthouse user guide, and other guides can always be found here on the website..
Note: OPERATIONS MANAGER support may be partial for earlier releases. Partial support may currently involve: Mass node Enrollment using ZTP Enrollment via USB drive All template types are supported.

23.04.0

About This User Guide

DOCUMENT REVISION HISTORY

Document Version Number
22.11

Revision Date

Description

Nov 22

Additions: l Subscriptions l Netops Modules Removals l Zapier related content

22.11 - Revision 1 Nov 22 22.11 - Revision 1 Dec 22

Update to Lighthouse configuration values on page 120 in Configuring the Subnets
Renamed "Managing Automation" to "Enabling Automation" and minor changes to text to suit.
Reorganised topics in "Shut Down or Restart" as requested.

23.04

Apr 23

Added Port Tagging changes to Nodes, Ports and Groups and Roles
Updated screens and messages for Port Logging Added Port-tags to CLI
Updated screenshots for

23.04.0

Document Revision History

Document Version Number

Revision Date

Description

Subscriptions Added command line tools

23.04.0

Document Revision History

Contents

About This User Guide

Document Revision History

Lighthouse Overview

Lighthouse Architecture

The Lighthouse Virtual Machine Requirements

Lighthouse to Node interactions

Using Multiple Lighthouses

EULA and GPL

Installing Lighthouse

Installing Lighthouse VM on VMware

VMware vSphere 6.0 client on Windows

Requirements

Launch the vSphere Client and connect to a vSphere instance.

Import the Lighthouse VM Open Volume Format (.ovf) image

Launch Lighthouse

Access the Console of a Running But Headless Lighthouse Instance 31

VMware Workstation Player on Windows as Host

Import the Opengear Lighthouse VM file into VMware Workstation

Player

VMware Workstation Pro on Windows as Host

Import the Lighthouse VM File Into VMware Workstation Pro

Installing Lighthouse VM on Hyper-V on Windows

Local deployment on Hyper-V Remote Hyper-V Deployment With Pre-authenticated User 23.04.0 VirtualBox Deployments Document Revision History

36 37 38 6

VirtualBox on Windows as host VirtualBox on macOS as host VirtualBox on Ubuntu as Host VirtualBox on Fedora Workstation as host
Installing Lighthouse VM on Linux Hosts
Virtual Machine Manager (KVM) on Ubuntu as host Boxes on Fedora Workstation as host Boxes on RHEL and Compatible Distributions
Installing in the Cloud
Installing in Azure Installing in Amazon Web Services
Create a Lighthouse AMI Launch a Lighthouse Instance on AWS
Instance Type Key Pair Network Settings Storage Advanced Details Set a password for the root user on Lighthouse:
Adding Disk Space to Lighthouse
Adding a New Disk to AWS Adding a New Disk - qemu specific instructions Adding a New Disk - Azure Adding a New Disk - Hyper-V Adding a New Disk - VirtualBox Increase the lh_data logical volume
First Boot of the Lighthouse VM

Setting up Lighthouse
Loading Lighthouse
23.04.0

Document Revision History

39 42 45 47
48
48 49 50
51
51 53 55 57 57 57 57 58 58 59
60
60 61 62 62 63 63
64
67 67
7

To load Lighthouse

Lighthouse IP addresses Logging into Lighthouse

Setting the Lighthouse hostname

Adding external IP addresses manually

The Lighthouse SSL Certificate

Set the Lighthouse Internal Clock

Setting up Networking Requirements

Examine or Modify the Lighthouse Sessions

Examine or Change the MTU of the Lighthouse VPN Tunnel

Network Connections

Edit a network interface Configure SNMP Manager Settings Examine or modify SNMP Service

Cellular Health Dashboard Changing Docker IP Ranges

Lighthouse MIBs

Examples of Lighthouse MIB queries using SNMP:

Setting up Multiple Instances of Lighthouse

Setting up a multiple instance Enabling Alternate REST API Ports

Configuring Subnets for a Multiple Instance Lighthouse

Configuring the Subnets Disconnecting a secondary instance Promoting a secondary instance Upgrading a multiple instance Lighthouse

Upgrading Dependent Multiple Instances of Lighthouse

Upgrading Lighthouse

Upgrading the system from within Lighthouse

Upgrading the Lighthouse system via the local terminal

23.04.0

Document Revision History

67 68 69 71 72 74 75
76
76 77 78 79 80 81 83 84 86 89
90
91 94 95 96 99 100 101 102
103
103 105
8

Upgrade NetOps Modules Configuration Backup Configuration restore
Shut Down or Restart Lighthouse
Finding the current Lighthouse instance version Shut Down a Running Lighthouse Instance Restarting a Running Lighthouse Instance Returning a Lighthouse instance to factory settings

Managing Lighthouse Nodes Monitor Nodes Monitor Ports
Filtering pages displaying nodes Filtering using the Free Text Search field
Filtering using Smart Groups Filtering NODES using the Port Filter
ENROL Nodes
The Enrolled Nodes page
Enrollment Bundles
Assigning Subscriptions Creating an Enrollment bundle Structure of an Enrollment bundle
Enrolling Nodes
Enrollment via Node Web UI Enrollment via Lighthouse Web UI Enrolling nodes via OM, ACM, CM, and IM Web UI Enrollment via USB drive Backing up Nodes
Work with Nodes

23.04.0

Document Revision History

106 108 109
110
110 112 113 114
115 115 117
119 119 121 123
124
125
129
129 130 133
134
134 135 136 138 139
141
9

Connect to the web-management interface of a node

Connecting to a node's serial ports

Find the Serial Ports

Access via HTML5 Web Terminal

Access a serial port via SSH

Example Console Gateway session Selecting nodes using shell-based tools Node organization and filtering

Filter Nodes

Creating Smart Groups

Editing a Smart Group Creating Port Filters

Editing an existing Port Filter

Upgrade Nodes via the UI

Firmware Files Upload a firmware file

Delete a firmware file

Create an upgrade task

Cancel an upgrade task

Copy a scheduled task

Delete an upgrade task

Retry an upgrade task Node Upgrade Runtime Behaviour

Promoting a Secondary instance to Primary

Downgrading and Skipping Versions

Time Zones

Offline nodes

Node Connection interrupted

Unenrolling Nodes at Upgrade

Lighthouse Availability and Stability

23.04.0

Document Revision History

141 143 144 148 149 151 151 152
152
153 156 157 159
160
161 161 163 164 168 169 171 172 173 174 175 176 177 178 179 180
10

Manage Ports
Filtering pages displaying ports Filtering using the Free Text Search field
Filtering using the Smart Group Filtering drop-down menu Filtering using the Port Filter drop-down menu Create a new Port Tag Edit A Port Tag DELETE A Port Tag Assign a Port Tag

Subscribing to Lighthouse
Adding a new subscription to Lighthouse To add a subscription
Assigning subscriptions to nodes View Subscriptions in the Lighthouse UI To assign nodes to subscriptions To assign a subscription To change a node's subscription

Configuring Lighthouse

Create Templates

Creating new user and group templates

Modifying existing users and groups templates

Deleting users or groups from a template

Deleting users and groups templates

Create Authentication Templates

Creating new authentication templates Modifying existing authentication templates

Deleting authentication templates

Create Script Templates

23.04.0

Document Revision History

180
182 182 184 185 185 187 188 189
192
195 196 197 198 199 200 201
202 202
202 205 206 207
207
207 209 210
210
11

Creating new script templates Modifying existing script templates Deleting script templates
Use Templates
Apply Templates Manually Activate NetOps modules via Template
Configuration & Technical support reports

Managing Lighthouse Users

Work with Groups

Creating New Groups and Roles

Create a new group

Available Roles: Available Operations Permissions:

Modifying existing groups

Use an existing group as a template for a new group

Create a new Role

Work with Users

Creating new local users

Create New Local Users for Remote Authentication Modify existing users

Expire user password

Setting Login Restrictions

Disabling a Lighthouse root user Delete and Disable Users

SAML Config for SSO

Generic IdP Setup

Generic IdP SAML Attribute

Lighthouse Setup

23.04.0

Document Revision History

211 212 213
213
213 215
217
220 221 221
221 223 223
225 227 227 229
230 231 233 234 235 236 237
238 239 241 242
12

Examples of Specific IdP Setups Okta
Create an Application Onelogin Azure Active Directory
Configure AUTH0 for IdP
Create an Application (Enterprise applications) Configure AUTH0 Metadata for IdP Configure Lighthouses for AUTH0 for IdP Configure AUTH0 for IdP
Limitations of SAML Configuration
IdP metadata certificate expiry Making Changes to User Permissions SAML SSO Usergroups SAML SSO Users
Configuring AAA
LDAP Configuration Radius Configuration TACACS+ configuration
Setting password policy
Password fields in Lighthouse

Enabling Advanced Functionality

Introduction

About NetOps

NetOps Platform Security

NetOps Module Management

Upgrade Modules from the UI

Upgrade Modules from the CLI

Update NetOps Modules Without Docker Access

23.04.0

Document Revision History

244 244 244 246 250
253
253 256 256 257
258
258 258 258 259
259
259 262 264
266
267
268 268 269
269 270 271 272 272
13

Use a Pre-built Offline Installer (via GUI)

Use a Pre-built Offline Installer (via CLI) Upgrade NetOps Modules

Activate a NetOps Module

Activate the NetOps Module on Lighthouse

'Always Activate' Mode on All Nodes (Automatic)

Activate NetOps on Selected Nodes (Automatic)

Activate the NetOps Module on Nodes (Manual) Deactivate (remove) a NetOps Module

Automation Gateway

Differences Between IP Access and Automation Gateway

How to use Automation Gateway

PROCEDURE Connect with REST/HTTP/HTTPS APIs Automation Gateway Service Discovery

IP ACCESS

Connectivity

Enable IP Access in Lighthouse

Enable NetOps Automation

Activate the IP Access Module

Network Ports Used for IP Access

Generate a Certificate and Export Client Configuration

Connect the VPN Client

Password Authentication During VPN Connection Advanced Options Connecting to WAN Zone

Network Access Policies for Operations Manager

Understanding Access Policies

Setting up Network Access Policies

To set Access policies

23.04.0

Document Revision History

274 275 275 277 279 281 282 283 283
285
286 287 288 289 293
294
294 297 298 299 300 301 302 303 303 304 305 306 307 308
14

Accessing Multiple VLANs or Ports Group memberships Firewall Zones Multiple Layer 3 Network Connections
Troubleshooting IP Access View the Docker logs Using the Routing Table
SECURE PROVISIONING
Secure Provisioning Configuration Management Stateless File Management Stateful Device Management Gateway How Secure Provisioning Works Support for Secure Provisioning
Vendor Managed Devices Supported by Secure Provisioning Local Network Services Provided by Nodes
Default Gateway DNS Server NTP Server Syslog Server Secure Provisioning Configuration Device Resource Bundle Node Inventory Create Device Configuration Activate the Secure Provisioning Module on Lighthouse Install the Node ConFigure a Per-node Module Activation Policy Option A. Automatically Activate All Nodes Upon Enrollment Option B. Automatically Activate Select Nodes Upon Enrollment Option C. Manually Activate Nodes After Enrollment Enroll the Node Into Lighthouse

23.04.0

Document Revision History

309 310 311 312 312 313 315
316
317 317 318 319 320 321 322 323 324 325 326 326 327 328 329 331 332 333 334 335 336 337
15

Connect Target Device

PROCEDURE

UI-based WorkFLow

UI Workflow

Create Device Resource Bundle

Define Resource Distribution

DeFine a Static Node Inventory

DEFine a Dynamic Node Inventory

Push Resources

CLI based WorkFLow

Create CoNFIguration YAML

DeFIne a Static Inventory:

Define a Dynamic Inventory:

How UI Fields Correspond to the YAML File (Example)

Upload Configuration and Resources

Option A. Secure Copy Method

Option B. git Method

Additional Resource Files and Device Type Files

Configure Device Resources via ZTP

Device Resource Bundle Matching

Resource Distribution

Baseline vs Final Device Configuration

Run a Script on a Newly Provisioned Device

Monitor the ZTP Progress of a Managed Device

WAN Gateway Services

Advanced Options

Using Variables in Configuration File Templates

Post-provisioning Scripts

Ordered Provisioning

Troubleshooting Secure Provisioning

Troubleshooting Commands

23.04.0

Document Revision History

338 339 339 340 341 344 345 346 347 347 349 352 353 356 359 360 361 362 363 364 365 366 366 367 368 369 370 373 375 376 377
16

Lighthouse CLI, Serial Port and REST API logging

379

Using ogconfig-cli to enable logging

379

Config searches using ogconfig-cli1

381

Add node and port to Lighthouse logs

381

Example logs

382

Enable logging

383

Disable logging

384

Syslog Export

384

Command line tools

387

Example node-command Output
node-info

388
388

Example node-info output

389

node-upgrade

389

An example node-upgrade run

391

Results and Error Messages in node-upgrade

392

port-tags

393

cron

394

sysflash

396

Support for mounting the hard disks with ogconfig-cli

398

Support for multiple instance Lighthouse with ogconfig-cli 399

Glossary

400

23.04.0

Document Revision History

LIGHTHOUSE OVERVIEW
Lighthouse allows network engineers to centrally access, manage, and monitor a network of Opengear console servers. Lighthouse is a virtual machine that can be hosted on various platforms like VMware or Hyper-V (on customer hardware) or on supported cloud providers (AWS or Azure). Console servers connect to a central Lighthouse instance over an OpenVPN tunnel, and are accessed, managed, and monitored via services transported over the VPN tunnel. The console server is referred to as the node.
LIGHTHOUSE ARCHITECTURE
Lighthouse functions as an API-driven platform with an HTML5 interface. It provides secure access to remote networks regardless of how they are connected or how users interact with the system. In combination with select Opengear Appliances, Lighthouse can push and manage Docker containers to each remote location to provide additional functionality and automation. Nodes connect to a central Lighthouse instance over an OpenVPN tunnel, and are accessed, managed, and monitored via services transported over the VPN tunnel.

23.04.0

Lighthouse Overview

Note: This diagram depicts High Availability. If there is no secondary Lighthouse, the setup remains the same but without the secondary elements.

THE LIGHTHOUSE VIRTUAL MACHINE REQUIREMENTS
Lighthouse deploys as an application running in a Linux-based virtual machine (VM). To run a Lighthouse VM, the host computer must be able to run a VM manager and at least one full 64-bit Linux-based virtual machine.
The Lighthouse binary is available in Open, VMware and Hyper-V specific Virtual Machine formats. VM managers such as Boxes, KVM and VirtualBox can make use of the open format. Lighthouse binaries are also available for cloud hosting services including Amazon's AWS, and Microsoft Azure.

23.04.0

Lighthouse Overview

NetOps Modules are released independently of Lighthouse software or Operations Manager firmware. These releases are shipped to Amazon's ECR Public Gallery, where they can be fetched by Lighthouse then deployed to all activated nodes by Lighthouse. NetOps modules can also be downloaded off the Opengear FTP site, and uploaded manually on Lighthouse.
To host Lighthouse, the VM needs to be configured to support:
l A minimum 50GB SCSI disk. Start with more if you think your network will expand. Additional space may be required depending on your feature usage on Lighthouse and the scale of the network.
l 1 x network interface card, preferably paravirtualised (virtio, vmxnet3), Realtek rtl8139, or Intel e1000 are also supported, bridged.
l VGA console for initial setup.
To dimension CPU and RAM resources, follow these guidelines:

Note: CPU and RAM utilization increase with the number of enrolled nodes, network utilisation and storage.

For small deployments (Up to 500 nodes), allocate at a minimum: l 2 x 64-bit CPU cores. l 8GB RAM. For medium deployments (between 500 and 1000 nodes), allocate at the minimum: l 4 x 64-bit CPU cores. l 16GB RAM. For large deployments (more than 1000), allocate allocate at the minimum: l 4 x 64-bit CPU cores. l 32GB RAM.

23.04.0

Lighthouse Overview

Note: In general it is recommended that you add more memory than you assume you need.
For large deployments, please contact us for guidance on the deployment options, including low and zero-touch Enrollment.
LIGHTHOUSE TO NODE INTERACTIONS
When a node is enrolled to Lighthouse, a Virtual Private Network (VPN) tunnel is established between Lighthouse and the node. This provides secure encrypted IP networking, which is resilient to changes in the underlying network (such as node failover to cellular). Lighthouse interacts with the node over the VPN tunnel, mostly via the node's REST API and SSH. Nodes notify Lighthouse of changes to their configuration and status. The node web UI is accessible directly through Lighthouse, and is proxied via the VPN; this allows secure user access to the node even if it is behind a firewall with no direct HTTPS access.
USING MULTIPLE LIGHTHOUSES
Lighthouse offers a form of high availability with the Multi Instance feature. The Multi Instance feature allows you to set up secondary/dependent instances of Lighthouse that automatically receive updates from the primary Lighthouse instance, and maintains connections to all of its remote nodes. It will also replicate various values from the primary Lighthouse to ensure in the event of a failover, all information is up to date.

23.04.0

Lighthouse Overview

Secondary instances are read-only. They may be used to view Lighthouse information specific to that instance, and to connect to its nodes via pmshell. Configuration changes must be performed on the primary instance, which will then update the information displayed on the secondary instance. The multiple instance feature has the following limitations: l Up to ten secondary instances can be enrolled. l Secondary Lighthouse instances are read-only. We recommended that you
preconfigure instance specific settings such as hostname, external endpoints, and time zone on a secondary instance before adding it to the primary in a normal way through UI. l Dependent Lighthouse instances must have zero nodes enrolled before being enrolled to the primary Lighthouse. l Removing a dependent Lighthouse instance will initiate a factory reset of the removed Lighthouse. l If external network addresses on the primary or secondary Lighthouses are updated after a secondary Lighthouse has been enrolled, it may break replication. l Only Opengear nodes with a version that supports multiple instance will connect to the secondary instance. Nodes that don't support multiple instance will behave normally on the primary. The secondary instance user interfaces are read-only.
EULA AND GPL
The current Opengear end-user license agreement and the GPL can be found at http://opengear.com/eula.

23.04.0

Lighthouse Overview

INSTALLING LIGHTHOUSE
To install Lighthouse you require: l A virtual machine (VM) that can support a 50GB disk at the minimum and l The correct upgrade file. Lighthouse Virtual Machines Availability Lighthouse VM is available in several formats on our secure ftp sites, from where you can download and verify the checksums and install the appropriate files. Ensure you use the correct upgrade file for your upgrade. l lighthouse-23.04.0-ovf.zip - An Open Volume Format file inside a PKZip
archive. This is for use with virtual machine managers such as KVM and Virtual Box. l lighthouse-23.04.0-vmx.zip - A VMware configuration file inside a PKZip archive. This is for use with virtual machine managers from VMware. l lighthouse-23.04.0-raw.hdd.tar - A raw (.hdd) file. This file has been compressed with tar and is for use with hosting services such as ElasticHosts. l lighthouse-23.04.0.ova - An Open Virtual Appliance file. This is for use with virtual machine managers such as VM and Virtual Box as well as for use with virtual machine managers from VMware. l lighthouse-23.04.0-hyperv.zip - A Hyper-V configuration file with Powershell script inside a PKZip archive. This is for use in Microsoft Hyper-V deployment. l lighthouse-23.04.0.azure.zip - A Microsoft Azure file, for deploying on Azure. l lighthouse-aws-bootstrap.sh, and the lighthouse-23.04.0.aws.raw.tar image - A shell script for deploying on AWS. l lighthouse-23.04.0.lh_upg - An upgrade file.

23.04.0

Installing Lighthouse

l lighthouse-23.04.0.aws.lh_upg - Upgrade on AWS. l lighthouse-23.04.0.azure.zip - Upgrade on Azure.
There are also SHASUMS files to verify the downloaded files. Note: The latest format for the files is as follows: lighthouse-<year>.<month>.<release/patchnumber>
INSTALLING LIGHTHOUSE VM ON VMWARE
This section describes how to install Lighthouse VMs on VMware hosts.
VMWARE VSPHERE 6.0 CLIENT ON WINDOWS
This procedure was tested using the VMware Sphere Client 6.0 running on Windows 7 Enterprise SP 1.

23.04.0

Installing Lighthouse

REQUIREMENTS
Ensure the following preconditions are met before you start installation:
l VMware vSphere 6.0 is installed and running on available hardware. l Access to a Windows computer on which the VMware vSphere 6.0 client is
installed. l The installed client application must be able to connect to and manage the
VMware vSphere 6.0 instance. l Finally, a copy of the Lighthouse binary in Open Volume Format is required, the
.ovf file, either copied to the Windows computer running the VMware vSphere 6.0 client or available via a URL.

23.04.0

Installing Lighthouse

LAUNCH THE VSPHERE CLIENT AND CONNECT TO A VSPHERE INSTANCE.
1. Launch the VMware vSphere Client. The simplest way is to use the Start Menu shortcut added during installation. Start > All Programs > VMware > VMware vSphere Client The VMware vSphere Client opens a login window.

2. Select the IP address or name of the VMware vSphere instance where Lighthouse will be installed from the IP address/Name drop-down list.
3. Enter the User name and Password required to gain management privileges to the selected VMware vSphere instance.
4. Click Login or press Return. 5. The login window displays progress text in the bottom left corner:
Connecting Loading inventory

23.04.0

Installing Lighthouse

Loading main form Displaying main form
The vSphere main form window opens.

23.04.0

Installing Lighthouse

IMPORT THE LIGHTHOUSE VM OPEN VOLUME FORMAT (.OVF) IMAGE
To import the Lighthouse VM:
1. From the vSphere Client menu bar, choose File > Deploy OVF Template. The Deploy OVF Template window displays, with the first stage, Source, preselected.
2. If the file Opengear Lighthouse VM.ovf is on a remote computer via a URL, enter the URL in the Deploy from a file or URL field. Otherwise, click Browse. An Open dialog displays.
a. Navigate to the directory containing the file Opengear Lighthouse VM.ovf.
b. Select Opengear Lighthouse VM.ovf and click Open.
3. The Deploy OVF Template window opens again, with the Opengear Lighthouse VM.ovf file listed in the Deploy from a file or URL combo-box. Click Next.
4. The OVF Template Details stage displays, showing basic information about the Lighthouse VM encapsulated by the .ovf file. Click Next.
5. The Name and Location screen displays with the Name field pre-populated and pre-selected. The default name is Opengear Lighthouse VM. To change this, enter a new name. Click Next.
6. The Disk Format screen displays which data-store the Lighthouse VM's virtual disk uses, how much free space the virtual disk has available and which provisioning scheme is being used. Click Next.
7. The Network Mapping screen shows which destination or inventory network the Lighthouse VM's virtual network is mapped to. Click Next.

23.04.0

Installing Lighthouse

8. The Ready to Complete screen displays, listing the basic properties of the about-to-be-deployed virtual machine. To be able to power-up the new virtual machine after deployment, select the Power on after deployment checkbox. Click Finish.
9. The Deploying Opengear Lighthouse VM progress dialog displays.
10. Once deployment has finished the Deployment Completed Successfully alert displays. Click Close. The new virtual machine is now deployed and displays in the inventory list.

23.04.0

Installing Lighthouse

LAUNCH LIGHTHOUSE
The vSphere Client provides several ways of launching a Virtual Machine hosted on a vSphere instance. Begin by selecting the Lighthouse VM from the vSphere Client's inventory list. The selected VM can then be launched by doing one of the following:
l Select Inventory > Virtual Machine > Power > Power On. l Press Ctrl-B. l Click the Power On the virtual machine link in the Basic Tasks section of the
Getting Started tab. This option requires the Getting Started tab be front-most. If it is not already the front-most tab, make it active by clicking it. l Select Inventory > Virtual Machine > Open Console and then: l Click Power On in the console tool bar, or l Choose VM > Power > Power On from the console menu bar, or l Press Ctrl-B.
Note: Only the fourth option above results in the running virtual machine being accessible from within the vSphere Client. The first three boot the Lighthouse VM and run it as a headless system, that is, with no display on a monitor. However, you can access Lighthouse via the web UI or SSH.

23.04.0

Installing Lighthouse

ACCESS THE CONSOLE OF A RUNNING BUT HEADLESS LIGHTHOUSE INSTANCE
If direct interaction with a running but headless *Opengear Lighthouse VM* is required, open a console window.
Select the running Opengear Lighthouse VM in the vSphere Client's inventory list, then do one of the following:
l Select Inventory > Virtual Machine > Open Console or l Right-click and select Open Console from the context menu that displays.
VMWARE WORKSTATION PLAYER ON WINDOWS AS HOST
Follow these steps when VMware Workstation Player is installed on the host Windows machine. VMware-ready virtual machine files are stored in C:\Users\%USERNAME%\Virtual Machines\. This is the location selected by default by VMware Workstation Player. If another location is preferred, adjust this procedure as required.
Prepare the Lighthouse VM file for import into VMware Workstation Player:
1. Move the lighthouse-23.04.0-vmx.zip archive to C:\Users\%USERNAME%\Virtual Machines\.
2. Right-click the archive and select Extract All from the contextual menu. 3. A Select a Destination and Extract Files dialog opens. By default, the location
is the same folder as the archive is in: C:\Users\%USERNAME%\Virtual Machines\. Leave this as the destination folder. 4. Uncheck the Show Extracted Files When Complete checkbox and then click Extract.

23.04.0

Installing Lighthouse

5. A folder called lighthouse is created inside C:\Users\%USERNAME%\Virtual Machines\.

23.04.0

Installing Lighthouse

IMPORT THE OPENGEAR LIGHTHOUSE VM FILE INTO VMWARE WORKSTATION PLAYER
1. Launch VMware Workstation Player. 2. Click Open a Virtual Machine. 3. Navigate to C:\Users\%USERNAME%\Virtual Machines\lighthouse\.
VMware Workstation Player points to Libraries > Documents and includes C:\Users\%USERNAME%\My Documents\. Assuming this is the case, double-click Virtual Machines and then double-click Lighthouse. 4. If only one file, Lighthouse, is visible, double-click on it to add the Lighthouse virtual machine to the VMware Workstation 12 Player virtual machines list. If more than one file displays, double-click Lighthouse.vmx. 5. The Lighthouse virtual machine is added to the VMware Workstation 12 Player virtual machines list. 6. With Opengear Lighthouse VM selected in the VMware Workstation 12 Player virtual machine list, click Play Virtual Machine to boot Lighthouse.
VMWARE WORKSTATION PRO ON WINDOWS AS HOST
This procedure assumes VMware Workstation Pro is already installed on the host Windows machine and that VMware-ready virtual machine files are stored in C:\Users\%USERNAME%\Virtual Machines\. If another location is preferred, adjust the steps as needed.

23.04.0

Installing Lighthouse

IMPORT THE LIGHTHOUSE VM FILE INTO VMWARE WORKSTATION PRO
Step 1. Preparation:
This step prepares the Lighthouse VM File for Import Into VMware Workstation Pro.
1. Move the lighthouse-23.04.0.zip archive to C:\Users\%USERNAME%\Virtual Machines\.
2. Right-click the lighthouse-23.04.0-vmx.zip archive and select Extract All from the contextual menu.
3. A Select a Destination and Extract Files dialog opens. The location is the same folder as the PKZip archive is in: C:\Users\%USERNAME%\Virtual Machines\. Leave this as the destination folder.
4. Uncheck the Show Extracted Files When Complete checkbox and then click Extract.
5. A folder called lighthouse is created inside C:\Users\%USERNAME%\Virtual Machines\.
Step 2. Import Lighthouse VM File:
1. Click Open a Virtual Machine. 2. Navigate to C:\Users\%USERNAME%\Virtual Machines\lighthouse\. 3. VMware Workstation Pro points to Libraries > Documents and this library
includes C:\Users\%USERNAME%\My Documents\. Double-click Virtual Machines and then double-click Lighthouse. 4. If only one file, Lighthouse, displays, double-click the file to add the Lighthouse virtual machine to the VMware Workstation Pro virtual machines list. If more than one file displays, double-click Lighthouse.vmx.

23.04.0

Installing Lighthouse

5. The Lighthouse virtual machine is added to the VMware Workstation Pro virtual machines list.
6. With the Opengear Lighthouse VM selected in the My Computer listing and the subsequent Opengear Lighthouse VM tab open, click Power on this virtual machine to boot Lighthouse.
INSTALLING LIGHTHOUSE VM ON HYPER-V ON WINDOWS
This section describes how to install Lighthouse VMs on Hyper-V on Windows: l Hyper-V running on Windows 10 or Windows Server 2016 l VirtualBox deployments

23.04.0

Installing Lighthouse

LOCAL DEPLOYMENT ON HYPER-V
This procedure assumes Hyper-V is already installed on a Windows 10/Windows Server 2016 host machine and the required Zip archive, lighthouse-23.04.0hyperv.zip is in C:\Users\%USERNAME%$\Downloads.
1. Unzip lighthouse-23.04.0-hyperv.zip. 2. Navigate to the extracted folder. Make sure lighthouse.vhd and lighthouse_
virtual_machine_registration.ps1 are in the folder. 3. Right-click and choose Run with Powershell to execute the Powershell script. 4. Leave the host name empty when prompted to deploy Lighthouse to local
machine. 5. Launch Hyper-V Manager. Lighthouse should be registered as a new VM image
under Virtual Machine. 6. Select Lighthouse from the list and click Start in the Action Panel to boot
Opengear Lighthouse.

23.04.0

Installing Lighthouse

REMOTE HYPER-V DEPLOYMENT WITH PREAUTHENTICATED USER
In this scenario, the user who performs Lighthouse deployment does not have local access to Hyper-V installed on Windows 2016. However, user has access to a Windows 10 which can manage the Hyper-V server remotely.
This procedure assumes Hyper-V is installed on Windows Server 2016 (or later) host machine and the required Zip archive lighthouse-23.04.0-hyperv.zip is in C:\Users\%USERNAME%$\Downloads. Windows 10 is already configured to manage Hyper-V on Windows Server 2016.
Note: Windows 10 and Windows Server 2016 must have the same user (same password) created. The user who performs the deployment must have permission to both execute the Powershell script and deploy the image on Hyper-V.
1. Login to Windows 10 with the user mentioned above. 2. Unzip lighthouse-23.04.0-hyperv.zip. 3. Navigate to the extracted folder. Make sure lighthouse.vhd and lighthouse_
virtual_machine_registration.ps1 are in the folder. 4. Right-click and choose Run with Powershell to execute the Powershell script. 5. Enter the fully qualified domain name for Windows Server 2016 when prompted
to deploy Lighthouse to the remotely-managed Windows Server 2016 machine. 6. Launch Hyper-V Manager. Lighthouse should be registered as a new VM image
under Virtual Machine for Windows Server 2016. 7. Select Lighthouse from the list and click Start in the Action Panel to boot
Opengear Lighthouse.

23.04.0

Installing Lighthouse

VIRTUALBOX DEPLOYMENTS
Lighthouse can be installed on the following hosts: l VirtualBox on Windows as host l VirtualBox on macOS as host l VirtualBox on Ubuntu as Host l VirtualBox on Fedora Workstation as host

23.04.0

Installing Lighthouse

VIRTUALBOX ON WINDOWS AS HOST
Note: We recommend that VirtualBox users customize their instances and change their network cards to one other than e1000. We also suggest virtio for better performance.
This procedure assumes VirtualBox is already installed on the host machine and the required PKZip archive, lighthouse-23.04.0-ovf.zip is in C:\Users\%USERNAME%$\Downloads. 1. Unzip lighthouse-ovf. It may appear as lighthouse-23.04.0-ovf.zip depending
on the Windows Explorer preference settings). 2. Right-click the lighthouse-ovf archive and select Extract all from the context
menu. 3. The Select a Destination and Extract Files dialog opens. The destination is
C:\Users\%USERNAME%\Downloads\Lighthouse-ovf. 4. Uncheck the Show extracted files when complete checkbox and edit the
destination by removing Lighthouse-ovf from the path. 5. Click Extract. 6. A folder called lighthouse-ovf is created inside
C:\Users\%USERNAME%\Downloads\. 7. Launch VirtualBox. 8. The Oracle VM VirtualBox Manager window displays. 9. Choose File > Import Appliance. 10. The Appliance to Import dialog opens. 11. Click Expert Mode. 12. The Appliance to import dialog changes from Guided Mode to Expert Mode.

23.04.0

Installing Lighthouse

13. Click the icon of a folder with an upward pointing arrow superimposed. This icon is to te far right of the Appliance to import field.h
14. The Open File dialog displays with C:\Users\%USERNAME%\Documents as the current folder.
15. Navigate to C:\Users\%USERNAME%\Downloads\Lighthouse.ovf\Opengear Lighthouse VM\.
16. Select the file Opengear Lighthouse VM and click Open. 17. Double-click the text vm in the Name row and Configuration column to make it
editable. 18. Type Opengear Lighthouse VM and press Enter. 19. Click Import. 20. A new virtual machine, called Opengear Lighthouse VM is added to the list of
virtual machines available to Virtual Box. 21. Select Opengear Lighthouse VM from the list. 22. Select Machine > Settings or click the Settings icon in the VirtualBox Manager
toolbar or press Control+S. 23. The Opengear Lighthouse VM - Settings dialog displays. 24. Click the System option in the list of options running down the left-hand side of
the dialog. 25. The dialog shows the System options available as three tabs: Motherboard,
Processor, and Acceleration. Depending on the underlying hardware platform, Acceleration may be greyed-out and unavailable. The Motherboard tab is preselected. 26. In the Motherboard tab, select the Hardware Clock in UTC Time checkbox. 27. Click OK or press Return

23.04.0

Installing Lighthouse

28. Select Opengear Lighthouse VM from the list and click Start in the Oracle VM VirtualBox Manager toolbar to boot Lighthouse. Double-clicking Opengear Lighthouse VM in the list also boots Lighthouse.
Note: Selecting the Hardware Clock in UTC Time checkbox is necessary because Lighthouse expects the hardware clock to be set to UTC, not local time. Unlike other Virtual Machine Managers, Virtual Box both exposes this option as a user-adjustable setting and does not set it to UTC by default.

23.04.0

Installing Lighthouse

VIRTUALBOX ON MACOS AS HOST
VirtualBox should already installed on the host macOS machine and the required PKZip archive, lighthouse-23.04.0-ovf.zip is in ~/Downloads.
1. Unzip lighthouse-23.04.0-ovf.zip. This creates a folder Lighthouse-ovf in ~/Downloads that contains the following files and folders:

2. Launch Virtual Box. The Oracle VM VirtualBox Manager window displays. 3. Select File > Import ApplianceI or press Command+I. 4. The Appliance to Import dialog sheet slides down from the Oracle VM
VirtualBox Manager toolbar. 5. Click Expert Mode.
The Appliance to Import dialog sheet changes from Guided Mode to Expert Mode. 6. Click the icon of a folder with an upward pointing arrow superimposed. This icon is to the far-right of the Appliance to Import field. 7. The Open File dialog sheet slides down from the Oracle VM VirtualBox Manager toolbar. This sheet opens with ~/Documents as the current folder. 8. Navigate to ~/Downloads/Lighthouse.ovf/Opengear Lighthouse VM/. 9. Select Opengear Lighthouse VM and click Open. (Depending on the Finder Preferences settings, the file may present as Opengear Lighthouse VM.ovf.) 10. Double-click the text vm in the Name row and Configuration column to make it editable.

23.04.0

Installing Lighthouse

11. Type Opengear Lighthouse VM and press Return. 12. Click Import.
A new virtual machine, called Opengear Lighthouse VM is added to the list of virtual machines. 13. Select Opengear Lighthouse VM from the list. 14. Choose Machine > Settings. Or click the Settings icon in the VirtualBox Manager toolbar. The Opengear Lighthouse VM Settings dialog displays. 15. Click the System option in the dialog's toolbar. The dialog shows the System options available as three tabs: Motherboard, Processor, and Acceleration. (Depending on the underlying hardware platform, Acceleration may be greyed-out and unavailable). The Motherboard tab is preselected. 16. In the Motherboard tab, select the Hardware Clock in UTC Time checkbox. 17. Click OK or press Return. 18. Select Opengear Lighthouse VM from the list and click Start in the Oracle VM VirtualBox Manager toolbar to boot Lighthouse. Double-clicking Opengear Lighthouse VM in the list also boots Lighthouse.
Note: Selecting the Hardware Clock in UTC Time checkbox is necessary because Lighthouse expects the hardware clock to be set to UTC, not local time. Unlike other Virtual Machine Managers, Virtual Box both exposes this option as a user-adjustable setting and does not set it to UTC by default.
Note: By default, VirtualBox stores virtual machines in ~/VirtualBox VMs. If this is the first virtual machine setup by VirtualBox, it creates the VirtualBox VMs folder in the current user's home-directory and a folder -- Opengear Lighthouse

23.04.0

Installing Lighthouse

VM -- inside the VirtualBox VMs folder. The Opengear Lighthouse VM folder contains the files and folders which make up Lighthouse when run under Virtual Box.

23.04.0

Installing Lighthouse

VIRTUALBOX ON UBUNTU AS HOST
Before beginning the procedure, make certain that VirtualBox and all required support files are installed on the host machine and the PKZip archive, lighthouse23.04.0-ovf.zip is in ~/Downloads.
1. Unzip lighthouse-23.04.0-ovf.zip. This creates a folder, Lighthouse-ovf in ~/Downloads that contains the following files and folders:

2. Launch Virtual Box. 3. The Oracle VM VirtualBox Manager window displays. 4. Choose File > Import Appliance. 5. The Appliance to import dialog opens. 6. Click Expert Mode. 7. The Appliance to Import dialog changes from Guided Mode to Expert Mode. 8. Click the icon of a folder with an upward pointing arrow superimposed. This icon
is positioned to the right of the Appliance to Import field. 9. A file-navigation dialog, Choose a Virtual Appliance to Import, opens with
~/Documents as the current folder. 10. Navigate to ~/Downloads/Lighthouse.ovf/Opengear Lighthouse VM/. 11. Select Opengear Lighthouse VM.ovf and click Open. 12. Double-click the text vm in the Name row and Configuration column to make it
editable. 13. Type Opengear Lighthouse VM and press Return.

23.04.0

Installing Lighthouse

14. Click Import. A new virtual machine, called Opengear Lighthouse VM is added to the list of virtual machines available to Virtual Box.
15. Select Opengear Lighthouse VM from the list and click Start in the Oracle VM VirtualBox Manager toolbar to boot Lighthouse. Double-clicking Opengear Lighthouse VM in the list also boots Lighthouse.
Note: VirtualBox stores virtual machines in ~/VirtualBox VMs. If this is the first virtual machine setup by VirtualBox it creates the VirtualBox VMs folder in the current user's home-directory and a folder Opengear Lighthouse VM inside the VirtualBox VMs folder. Inside Opengear Lighthouse VM are the files and folders which make up Lighthouse when run under Virtual Box.

23.04.0

Installing Lighthouse

VIRTUALBOX ON FEDORA WORKSTATION AS HOST
Before beginning, make certain that VirtualBox and all required support files are already installed on the host machine and the PKZip archive, lighthouse-23.04.0ovf.zip is in ~/Downloads.
1. Unzip lighthouse-23.04.0-ovf.zip. This creates a folder Lighthouse.ovf in ~/Downloads that contains the following files and folders:

2. Launch Virtual Box. The Oracle VM VirtualBox Manager window displays.
3. Choose File > Import Appliance or press Control-I. The Appliance to Import dialog opens.
4. Click Expert Mode. The Appliance to Import dialog changes from Guided Mode to Expert Mode.
5. Click the icon of a folder with an upward pointing arrow superimposed. This icon is to the far right of the Appliance to Import field. The Open File dialog opens with ~/Documents as the current folder.
6. Navigate to ~/Downloads/Lighthouse.ovf/Opengear Lighthouse VM/. 7. Select Opengear Lighthouse VM and click Open. 8. Double-click the text vm in the Name row and Configuration column to make it
editable. 9. Type Opengear Lighthouse VM and press Return.

23.04.0

Installing Lighthouse

10. Click Import. A new virtual machine, called Opengear Lighthouse VM is added to the list of virtual machines available to Virtual Box.
11. Select Opengear Lighthouse VM from the list and click Start in the Oracle VM VirtualBox Manager toolbar to boot Lighthouse. Double-clicking Opengear Lighthouse VM in the list also boots Lighthouse.
Note: VirtualBox stores virtual machines in ~/VirtualBox VMs. If this is the first virtual machine setup by VirtualBox, it creates the VirtualBox VMs folder in the current user's home-directory and a folder Opengear Lighthouse VM inside the VirtualBox VMs folder. Inside Opengear Lighthouse VM are the files and folders which make up Lighthouse when run under Virtual Box.
INSTALLING LIGHTHOUSE VM ON LINUX HOSTS
This section describes how to install Lighthouse VMs on Linux hosts: l Ubuntu l Fedora Workstation l RHEL
VIRTUAL MACHINE MANAGER (KVM) ON UBUNTU AS HOST
Virtual Machine Manager and all required support files should be installed on the host machine and the .tar archive, lighthouse-23.04.0-raw.hdd.tar is in ~/Downloads.

23.04.0

Installing Lighthouse

1. Expand lighthouse-23.04.0-raw.hdd.tar. This extracts lighthouse-23.04.0raw.hdd in ~/Downloads.
2. Launch Virtual Machine Manager. 3. Click New at the top left of the Virtual Machine Manager window (or choose File >
New Virtual Machine). The Source Selection window opens. 4. Click Select a file. A Select a Device or ISO File dialog slides into view. 5. Navigate to ~/Downloads/. 6. Select the file lighthouse-23.04.0-raw.hdd and click Open in the top right-corner
of the dialog. A Review window opens providing basic information about the virtual machine or box, as Boxes calls them, to be created. 7. Click Create in the top right corner of the Review window. 8. A new virtual machine instance, Opengear_Lighthouse_VM-disk1, is created and presented in the Boxes window. 9. To rename the virtual machine instance, right-click on the machine instance and choose Properties from the contextual menu that displays. Click anywhere in the Name field to select and edit the name. Click the Close box to save the changes.
BOXES ON FEDORA WORKSTATION AS HOST
Boxes and all required support files should be installed on the host machine and lighthouse-23.04.0-ovf.zip is in ~/Downloads. 1. Unzip lighthouse-23.04.0-ovf.zip. This creates a folder Lighthouse.ovf in
~/Downloads that contains the following files and folders:

23.04.0

Installing Lighthouse

2. Launch Boxes. 3. Click New in the Boxes window title bar. The Source Selection window opens. 4. Click Select a File. A Select a Device or ISO File dialog opens. 5. Navigate to ~/Downloads/Lighthouse.ovf/Opengear Lighthouse VM/. 6. Select the file Opengear_Lighthouse_VM-disk1.vmdk and click Open in the
top right-hand corner of the dialog. A Review window opens providing basic information about the virtual machine (or `box', as Boxes calls them) to be created. 7. Click Create in the top right corner of the Review window. 8. A new virtual machine instance, Opengear_Lighthouse_VM-disk1 is created and presented in the Boxes window. 9. To rename the virtual machine instance, right-click on the machine instance and choose Properties from the contextual menu that displays. Click anywhere in the Name field to select and edit the name. Click Close to save the changes.
BOXES ON RHEL AND COMPATIBLE DISTRIBUTIONS
CentOS should be installed, complete with the Gnome desktop environment as the host operating system. CentOS includes the full complement of KVM-centric virtualization tools including the GUI-based virtualization management tools Boxes and virt-manager and the shell-based virtualization management tool virsh.
This procedure assumes Boxes is used to setup and manage the Lighthouse VM and that the required PKZip archive, lighthouse-23.04.0-ovf.zip is in ~/Downloads.
To install Lighthouse on CentOS:

23.04.0

Installing Lighthouse

1. Unzip lighthouse-23.04.0-ovf.zip. This creates a folder Lighthouse.ovf in ~/Downloads that contains the following files and folders:

2. Launch Boxes 3. Click New in the Boxes title bar. 4. Navigate to ~/Downloads/Lighthouse.ovf/Opengear Lighthouse VM/ 5. Select Opengear Lighthouse VM and click Open. A new virtual machine, called
Opengear LighthouseVM is added to the list of virtual machines available to Boxes.

INSTALLING IN THE CLOUD
This section describes how to install Lighthouse on supported cloud environments: l Azure l AWS.

INSTALLING IN AZURE
To use the Microsoft Azure environment: 1. Login to the Microsoft Azure portal at https://portal.azure.com 2. Under Azure Services, click the Storage Accounts icon. 3. Create a new storage account with at least 50GB storage space.

23.04.0

Installing Lighthouse

4. Navigate to the newly created storage account, click Storage Explorer and create a new blob container.
5. Upload the lighthouse.vhd image provided with the lighthouse23.04.0.azure.zip file.
6. Go to the newly created image and click Create VM. Ensure the selected image is correct.
7. Choose the desired virtual machine instance size. 8. Enter the details for the Microsoft Azure admin user with either password OR
SSH key authentication.
Note: If SSH key authentication is selected, the user will be created without a password and will be unable to access the UI.
9. To login to the Lighthouse UI, login via SSH with key authentication and configure a password using the ogpasswd utility, for example,
sudo ogpasswd -u root -p NewPassword
10. Select the inbound ports enabled for the Lighthouse instance (SSH, HTTPS). 11. Navigate to the next page of configuration (Disks) and select the desired storage
option for the boot disk. 12. Go to the Review page. 13. After validation passes, click Create. 14. Go to the Virtual Machines page, select the virtual machine and open the Serial
Console. Lighthouse should now be deploying on Microsoft Azure. 15. To allow nodes to enroll in Lighthouse, you will need to add the following firewall
rules in the Microsoft Azure virtual machine control panel:

23.04.0

Installing Lighthouse

a. Go to the virtual machine configuration and select Networking. b. Add a rule to allow UDP connections from any source to port 1194 on the
instance's internal network address (10.0.0.x). c. Add a rule to allow UDP connections from any source to port 1195 on the
instance's internal network address (10.0.0.x). d. HTTPS and SSH should already be allowed from the initial setup If not, add
them. 16. Confirm that the Azure instance public IP address has been added to external
endpoints in Settings > System > Administration.
INSTALLING IN AMAZON WEB SERVICES
To use Lighthouse with Amazon Web Services (AWS), you will first need to create an Amazon Machine Image (AMI) containing Lighthouse. A temporary Linux "buildbox" EC2 instance should be used to create a private Lighthouse AMI.
Note: This is a one-time procedure. The AMI can be used to create multiple instances of Lighthouse, and upgrades can be performed through the Lighthouse Web UI.
1. Create an account on AWS with an IAM user, and a key pair and an access key. l The IAM user should have, at a minimum, permissions to create, attach, delete, and snapshot EBS volumes as well as create an Amazon Machine Image (AMI).
2. Create an AWS EC2 Linux instance, with 50GB or more of disk space. l Amazon Linux 2 or Amazon Linux 2023 are suitable. l The t2.small instance type with default (8 GiB) root volume is sufficient.

23.04.0

Installing Lighthouse

3. Create an Amazon Machine Image. l This should be run on the Linux EC2 instance just created. The steps are detailed below.
Amazon offers a walkthrough of the necessary steps to set up on AWS. Click here to read the instructions on Amazon's website.

23.04.0

Installing Lighthouse

CREATE A LIGHTHOUSE AMI
The lighthouse-aws-bootstrap.sh script is used to create the Lighthouse AMI. Usage information can be displayed by using the -h option.
After creating the EC2 Linux instance:
1. Connect via SSH to your instance on AWS using the username ec2-user and the private key you created previously. All subsequent steps must be performed on the instance.
2. Configure AWS using the following command: aws configure
3. Provide the access key and region details (other settings may be left unchanged). 4. Download the aws-bootstrap script:
wget http://ftp.opengear.com/download/lighthouse/current/aws/lig hthouse-aws-bootstrap.sh
5. Run the lighthouse-aws-bootstrap.sh script as follows: bash ./lighthouse-aws-bootstrap.sh -n Lighthouse http://ftp.opengear.com/download/lighthouse/current/aws/lig hthouse-23.04.0.aws.raw.tar
6. Wait while the Lighthouse AMI is created. This can take some time (up to 30 minutes).
After the AMI has been created, terminate the Linux EC2 instance to avoid incurring additional costs.

EXAMPLE OF A RUNNING BOOTSTRAP SCRIPT
$ bash ./lighthouse-aws-bootstrap.sh -n Lighthouse -r \

23.04.0

Installing Lighthouse

> http://ftp.opengear.com/download/lighthouse/current/aws/lighthouse23.04.0.aws.raw.tar Downloading image... Image size is 54049899008 bytes (51 GiB) Creating volume... Attaching volume vol-09fb0b463f5a59eaf to EC2 instance... Cloning image onto volume... 0+852971 records in 0+852971 records out 54049899008 bytes (54 GB, 50 GiB) copied, 845.072 s, 64.0 MB/s Creating snapshot of volume... Waiting for snapshot snap-0f83746856d985070 to complete... Creating AMI from snapshot snap-0f83746856d985070... Done! Cleaning up...

23.04.0

Installing Lighthouse

LAUNCH A LIGHTHOUSE INSTANCE ON AWS
Once the Lighthouse AMI has been created, it will display in the Amazon Machine Images (AMIs) section of the EC2 Management Console. To create a new Lighthouse EC2 instance, select the Lighthouse AMI then "Launch instance from AMI".
INSTANCE TYPE
Lighthouse should run on a general purpose instance type, such as M5.
Note: If an instance type that supports "burstable" CPU such as T2 is used, please ensure that unlimited CPU is selected, to avoid operational problems caused by CPU throttling.

KEY PAIR
EC2 requires a key pair to be specified when launching instances.
NETWORK SETTINGS
A security group should be created. Lighthouse requires some ports to be open: l SSH (TCP/22) Secure Shell. Access should be limited to just your corporate
network. l HTTPS (TCP/443) Lighthouse Web UI and REST API. This is used by both web
browsers and nodes (eg, for call-home enrollment). l OpenVPN (UDP/1194) Lighthouse VPN. This is used to communicate with
nodes once they are enrolled.

23.04.0

Installing Lighthouse

l Other ports may need to be opened, depending on feature usage. For example o SNMP (UDP/161) SNMP Management o OpenVPN (UDP/1195) Lighthouse Multiple Instance VPN o HTTPS (TCP/8443) Alternate REST API port
STORAGE
By default, the root volume will be around 53 GiB. This may be sufficient, depending on your intended usage. It is easier to specify more storage now, but more can be added later.
ADVANCED DETAILS
An initial root password can be set in the UserData section. password=topSecretPassword123

23.04.0

Installing Lighthouse

SET A PASSWORD FOR THE ROOT USER ON LIGHTHOUSE:
Open the Configure instance details page of the AMI launch process.
1. Under the Advanced Details section, add a root password using the userdata field in the format password=Whatever123. If you do not, you will have to log in via SSH to set it.
2. If you are logged into Lighthouse via SSH keys, you will need to set root password to login via GUI. Use the "ogpasswd" utility to do this. We suggest using alpha numeric character passwords with this utility and then set a stronger/complex password once you are logged in via the GUI. ogpasswd -u root -p MySecretPassword
3. When done, the EC2 Linux instance can be shut down and removed or saved for creating future instances.
Note: Currently AWS support is limited to: All standard Lighthouse operations · Running on the AWS platform · Providing aws-cli tools for interaction with AWS · Loading the provided SSH key for the root user · Running custom scripts on startup (see above) · Providing a root password via userdata (see above) At this time we do not support: · Using AWS's database services · Using AWS's redis services · Using any of AWS's scalability functionality
Note: The root password must be specified in the Advanced Details.

23.04.0

Installing Lighthouse

ADDING DISK SPACE TO LIGHTHOUSE
Additional physical volumes can be added to the volume group as required, and the logical volumes extended using lvextend and resize2fs to take advantage of the additional space. Before you add disk space: l Ensure you take a backup of Lighthouse l In the case of a multiple instance Lighthouse installation, consider upgrading all
instances, not merely the primary instance.
ADDING A NEW DISK TO AWS
Launch a Lighthouse instance as per our guidelines or your own deployment processes and note the instance ID. To add a volume to an AWS Lighthouse without having to shut down the Lighthouse: 1. In the AWS web console, go to Volumes and create a new 50GB volume in the
same availability zone as your LH instance. 2. Once the volume is created, select it and click the Actions button and select
Attach Volume. 3. Enter the LH instance ID for the instance field and /dev/xvdb (or /dev/xvdd,
/dev/xvde and so on) as the device and click Attach. When you SSH into the LH you should be able to see the new volume as /dev/xvdb (or whatever device name you gave it).

23.04.0

Installing Lighthouse

ADDING A NEW DISK - QEMU SPECIFIC INSTRUCTIONS
Launch a qemu Lighthouse instance as per our guidelines or your own deployment. To add a volume to the instance:
1. Shutdown the instance with the following command: shutdown -h now
2. Create a new disk for the LH. You can use a different number for "count" which is in MiB. dd if=/dev/zero of=/tmp/new_lh_disk.lh_hdd bs=1024k count=256 qemu-img convert -p -f raw -O qcow2 /tmp/new_lh_disk.lh /tmp/new_lh_disk.qcow2
3. Restart your qemu instance but make sure to add the new qcow2 disk to the command. Here is an example of what you should add to your qemu command when launching the instance: -drive if=scsi,file=/tmp/new_lh_disk.qcow2
Note: This is just an example. You should specify the disk in a similar way to how you specified the primary Lighthouse disk. and you should make sure that the new disk is specified last, otherwise your disk will appear out of order when you boot the Lighthouse.
4. Once the LH boots you should have a new /dev/sdX device and the 'unused_ disks' command should report that disk when you log in.

23.04.0

Installing Lighthouse

ADDING A NEW DISK - AZURE
Launch the LVM Lighthouse instance as per our guidelines or your own deployment. To add a volume to the instance, use the following link to attach a new disk to your Lighthouse VM. Stop before you reach the section, "Connect to the Linux VM to mount the new disk." https://docs.microsoft.com/en-us/azure/virtual-machines/linux/attach-disk-portal
ADDING A NEW DISK - HYPER-V
1. Launch the LVM Lighthouse instance as per our guidelines or your own deployment. To add a volume to the instance:
2. Shutdown your Hyper-V Lighthouse instance. 3. Open your Hyper-V manager. 4. Navigate to the VM list and locate your Lighthouse VM. 5. Right click on the instance and click Settings. 6. Click on the SCSI controller. 7. Select Hard drive on the right and click Add. 8. Select Virtual hard disk and click New. 9. Follow the prompts and select the options that best suit your needs and
environment. 10. Once you've created the disk, click Apply in the VM settings window. 11. Restart the Lighthouse.

23.04.0

Installing Lighthouse

ADDING A NEW DISK - VIRTUALBOX
Launch the LVM Lighthouse instance as per our guidelines from the .ova file or your own deployment. To add a volume to the instance: 1. Shutdown the Lighthouse instance. 2. In the VirtualBox UI, locate your Lighthouse instance and right-click it. 3. Select Settings. 4. Select Storage on the left. 5. Click the Controller: SCSI in the disk list. 6. You will see two small icons, both with a green '+' symbol. Hover your mouse over
the one that says Adds a hard disk and click it. 7. Click the Create icon. 8. Follow the prompts to create a new disk image. 9. Select the new disk image and click the Choose button. 10. Click Ok to exit the VM settings window. 11. Restart Lighthouse.

INCREASE THE LH_DATA LOGICAL VOLUME

1. Add the new disk to the LH VM (platform dependent, see above).

2. Log into the shell on Lighthouse. you should see the new "unused" disk listed in the welcome message. This is the case for any non-system disks aren't currently being used by the LVM system.

3. Create a partition on the new disk:

fdisk /dev/sdb (or /dev/xvdb, or /dev/(sd|xvd)X

NOTE: Be sure specify the correct disk, it might be /dev/xvdb on AWS.

23.04.0

Installing Lighthouse

4. Type 'n' and ENTER to create a new partition. 5. Type 'p' and ENTER to create a primary parition. 6. Continue hitting ENTER to accept the defaults to use the whole disk. 7. Type 'w' and ENTER to write the changes and exit fdisk. 8. Add the new partition as a physical volume (assuming you are now using
/dev/sdb1, note that /dev/xvdb1 will now be mapped to /dev/sdb1 so make sure you use sdb1). pvcreate /dev/sdb1 9. Extend the volume group with the new physical volume. vgextend lhvg /dev/sdb1 10. Assuming the new disk gives you at least 2GB of extra space, expand the lh_ data logical volume. lvextend -L +2G /dev/mapper/lhvg-lh_data 11. Update the file system of the lh_data disk to use the extra space. resize2fs /dev/mapper/lhvg-lh_data 12. When you log into the shell, the disk should no longer be listed as "unused".

FIRST BOOT OF THE LIGHTHOUSE VM

Note: This section does not apply to Azure or AWS.
During boot, two screens open. 1. The first screen prompts to Select Lighthouse boot mode and displays four
options: l Graphics console boot l Graphics console recovery mode

23.04.0

Installing Lighthouse

l Serial console boot l Serial console recovery mode
Graphics console boot is preselected and should not be changed. After the first boot has completed a message displays:
Welcome to Lighthouse. This is software version: 2021.Q4.0
2. The final step in the initial setup displays:
To complete initial setup, please set a new root password. Press ENTER to continue.
3. After pressing Enter, a prompt displays:
Enter new root password:
4. Enter a password and press Enter. Keep in mind that non-US-English keyboards are not supported in the graphics console.
Note: It is recommended that you set a temporary password at this point and change it to a very strong high-entropy password as soon as possible using the WebUI.
5. The confirm prompt displays:
Confirm given password
6. Re-enter the password and press Enter. Multiple configuration notices appear ending with a login prompt:

23.04.0

Installing Lighthouse

lighthouse login:
7. Enter root and press Enter. A password prompt displays:
Password:
8. Enter the newly-set password and press Enter. A standard bash shell prompt displays with the list of static, DHCP, and IPv6 addresses.
net1 192.168.0.1/24 net1:dhcp 192.168.1.186/24 net1 fe80::a00:27ff:fe39:daa3/64 root@lighthouse:~#

23.04.0

Installing Lighthouse

SETTING UP LIGHTHOUSE
This section describes the initial setup and loading of the Lighthouse application to effectively monitor and manage your network as follows: l Loading Lighthouse l Setting up Networking Requirements l Setting up Multiple Instances l Upgrading Lighthouse l Shutting down or Restarting Lighthouse
LOADING LIGHTHOUSE
This section describes the initial setup stages for a new Lighthouse VM, from login, to setting external addresses, to setting the clock.
TO LOAD LIGHTHOUSE
1. Open a new browser window or tab, then enter one of the following:
https://192.168.0.1/
https://[DHCP-supplied address]/
or an IPv6 address, for example:
https://[fe80::a00:27ff:fe39:daa3/64].

23.04.0

Setting up Lighthouse

2. Press Return. The Lighthouse Login page loads. A warning message displays because of the default self- signed certificate. You can ignore this at first load, and later install your own valid certificate using SETTINGS > SERVICES >HTTPS Certificate to remove the warning message.

LIGHTHOUSE IP ADDRESSES
When the Lighthouse VM is booted and running, it can be reached at: l The static address, 192.168.0.1, or l The address it is assigned by any DHCP server it finds. Type ifconfig command
to see which IP address the VM has been allocated by DHCP. l Static IP address on another subnet, requiring IP address, mask, gateway. Only the first two options are available out-of-the-box. The static IP on another subnet has to be configured first. If there is no DHCP, and Lighthouse is not reachable on the default address 192.168.0.1 then, the static IPv4 address can be changed from the console using the ogsetnetwork.sh command.
root@lighthouse:~# ogsetnetwork.sh --help
Usage:
ogsetnetwork.sh [Use options below to configure a static IP] -a, --address Static IP address to set -n, --netmask Netmask for IP address -g, --gateway Network gateway address -d, --dns1 Chosen DNS server #1 -D, --dns2 Chosen DNS #2

23.04.0

Setting up Lighthouse

Example:
ogsetnetwork.sh -a 192.168.1.24 -n 255.255.255.0 -g 192.168.1.1
Note: Type ogset<tab> and tab completion will give you the full command.
LOGGING INTO LIGHTHOUSE
To login to Lighthouse: 1. Enter a username in the Username field. The first time you log in, the username
will be root. 2. Enter the password in the Password field. 3. Click Log In or press Enter. The Lighthouse Dashboard loads.
When you log in, the standard Lighthouse menus, options and panes display:

23.04.0

Setting up Lighthouse

l The primary menu options - MONITOR, MANAGE, CONFIGURE, and SETTINGS
l A light/dark mode toggle on the bottom left of the interface. This control allows you to modify the appearance of the dashboard for low light situations.
l System menu options Add Node, Help, System & Subscriptions, and Log Out on the header.
l Various panes - some column headings have Arrow Icons next to them. Click to toggle between ascending and descending order.
Note: The elements that appear on the Dashboard page depend on the privileges granted to the currently logged in user. In this guide, screenshots represent what the root user sees.

23.04.0

Setting up Lighthouse

For root users, the Dashboard displays the following panes; Enrolled Nodes, Cellular Health Status, and Current Node Status. Click Cellular Health to go to MANAGE > NODES > Node Web UI page where you can view the Cellular Health column with information on each node.
Note: The Cellular Health only displays if Cellular Health reporting is enabled.
Click Current Node Status to go to the appropriate page, that is, Connected, Disconnected, or Pending Node pages.
SETTING THE LIGHTHOUSE HOSTNAME
To set the hostname for a running Lighthouse instance: 1. Select SETTINGS > SYSTEM > Administration. 2. Edit the Hostname field as desired. Hostnames must follow the naming
conventions l ASCII alphanumerical characters plus - and . l Maximum 64 characters

23.04.0

Setting up Lighthouse

3. Click Apply.
ADDING EXTERNAL IP ADDRESSES MANUALLY
Adding a Lighthouse instance's external IP address or addresses manually to a Lighthouse instance's configuration is an optional step. In general, these should not be changed expect by a network support engineer. For more information on the network ports used by Lighthouse, see this link on the network architecture.
Note: IP addresses can be IPv4, IPv6 or DNS names.
To add a single external address: 1. Select SETTINGS > SYSTEM > Administration.

23.04.0

Setting up Lighthouse

2. In the Address field of the External Network Addresses section, enter an IP address or DNS name.
3. Change the API Port, VPN Port, or Multi-Instance VPN Port if the ports used on the entered IP address are different from the default settings.
4. Click Apply. To add further external addresses to a Lighthouse instance's configuration: 1. Click the + button. A second row displays in the External Network Addresses
section. 2. In the Address field, enter an IP address. 3. Change the API Port, VPN Port, or Multi-Instance VPN Port if the ports used

23.04.0

Setting up Lighthouse

on the entered IP address are different from the default settings. 4. Click Apply.
To change the order in which manually added IP addresses are sent to remote nodes:
1. Click the up and down arrows in the Order column to change the order in which the IP addresses are listed.
2. Click Apply. If external IP addresses are manually added to a Lighthouse configuration, these addresses are sent to a remote node during enrollment. If no external IP address is manually added, default external IP addresses are used.
The external IP addresses are sent to a remote node during Enrollment in the order configured on the SETTINGS > System > Administration page.

THE LIGHTHOUSE SSL CERTIFICATE
Lighthouse ships with a private SSL Certificate that encrypts communications between it and the browser. Most browsers will display a warning message when first trying to access Lighthouse.

Note: If you plan to use the Lighthouse multiple instance feature, the certificate will be used on all instances. In this case, we recommend using a wildcard certificate.

To examine this certificate or generate a new Certificate Signing Request, select SETTINGS > SERVICES > HTTPS Certificate. The details of the Current SSL Certificate appear.

Below this listing is a Certificate Signing Request form, which can be used to generate a new SSL certificate.

23.04.0

Setting up Lighthouse

SET THE LIGHTHOUSE INTERNAL CLOCK
Lighthouse and Node system times need to be in sync. Enrollment can fail if there is a significant difference between the Lighthouse and the node. It is recommended that you use an NTP server to automatically manage date and time. If using multiple instances, configure the time zone for the secondary instances before adding them as secondary instance. The only way to change the time zone after adding a secondary instance is to use the CLI. To set the time zone: 1. Select SETTINGS > DATE & TIME > Time Zone. 2. Select the Lighthouse instance's time-zone from the Time Zone drop-down list. 3. Click Apply. Set time automatically It is highly recommended that you use an NTP Server to automatically manage date and time:

23.04.0

Setting up Lighthouse

1. Select SETTINGS > DATE & TIME > Automatic Settings.

2. Click the Enabled checkbox. 3. Click on + Add Server. 4. Enter a working NTP Server address in the NTP Server Address field. 5. Click Apply.

SETTING UP NETWORKING REQUIREMENTS
This section outlines the basic steps to setup networking requirements for Lighthouse.

EXAMINE OR MODIFY THE LIGHTHOUSE SESSIONS
To modify Web and CLI session settings select SETTINGS > SERVICES > Session Settings.

23.04.0

Setting up Lighthouse

l Web Session Timeout: This value can be set from 1 to 1440 minutes. l CLI Session Timeout: This value can be set from 1 to 1440 minutes or set it to 0
to disable the timeout. Changes take effect the next time a user logs in via the CLI. l Enable additional Enrollment-only REST API port: This port defaults to 8443. Enabling this API allows users who are using NAT for the Lighthouse to expose an external port publicly only for nodes that are attempting to enroll to the Lighthouse, and not for the other functionality available from the REST API. After this option is disabled, all endpoints should be accessible as per normal usage.
EXAMINE OR CHANGE THE MTU OF THE LIGHTHOUSE VPN TUNNEL
The maximum transmission unit (MTU) setting can be configured for traffic that is travelling through the Lighthouse VPN in an attempt to solve MTU path discovery problems. The maximum transmission unit (MTU) is the size, in bytes, of the largest packet supported by a network layer protocol, including both headers and data. To modify the MTU of the Lighthouse VPN tunnel select SETTINGS > SERVICES > Lighthouse VPN. Allowed values are between 1280 and 1500.

23.04.0

Setting up Lighthouse

NETWORK CONNECTIONS
To see the network connections available to Lighthouse: 1. Select SETTINGS > NETWORK CONNECTIONS > Network Interfaces. 2. The three connections display:
a. Static interfaces b. DHCP IPv4 interfaces and by default, c. An automatic IPv6 connection.
Note: Editing the network settings may break connectivity.

23.04.0

Setting up Lighthouse

EDIT A NETWORK INTERFACE
1. Select SETTINGS > NETWORK CONNECTIONS > Network Interfaces. 2. Click the Edit icon to the right of the network interface to be modified. 3. Make the desired changes. 4. Click Apply.

Note: Do not change the Connection Type of default network interfaces. If a default interface is not required, edit the interface and uncheck the Enabled checkbox. Instead, disable the interface which will not be used by unchecking the Enabled checkbox. If default-static and default-DHCP are changed to the same configuration method (that is, if both are set to Static assignment or both are set to DHCP) neither interface works.

23.04.0

Setting up Lighthouse

CONFIGURE SNMP MANAGER SETTINGS

Administrative users can configure the Simple Network Management Protocol (SNMP) Manager settings. The SNMP Manager allows SNMP TRAP/INFORM messages to be sent from Lighthouse to a configured server any time a node connection status is changed.

To enable the SNMP Manager: 1. Select SETTINGS > SERVICES > SNMP Manager. 2. Under the Settings section, select the Enable checkbox. 3. In the Manager Protocol, select UDP, or UDP over IPv6, TCP, or TCP over IPv6. 4. Enter the Manager Address to receive SNMP messages. 5. Enter the Manager Port. 6. From the SNMP protocol Version select v1 or v2c or v3. Depending on the selected SNMP Version, complete the following steps.

For v1, enter the SNMP Community to use for messages. For v2c:

1. Select TRAP or INFORM as the SNMP Message Type.

2. Enter the SNMP Community to use for messages.

For v3:

1. Choose TRAP or INFORM as the SNMP Message Type.

2. Specify an optional Engine ID for sending an SNMP TRAP message. If left blank, the auto-generated Engine ID from the SNMP Service will be used. An Engine ID is not needed for an SNMP INFORM message.

3. Enter the SNMP v3 Engine ID and desired Configure SNMP Manager Settings.

23.04.0

Setting up Lighthouse

4. Enter the Username to send the messages as, select the Authentication Protocol, either MD5 or SHA, and enter the SNMP user's Authentication Password. 5. Choose a Privacy Protocol, either DES or AES, and enter a Privacy Password.
For all three SNMP versions, trigger TRAP/INFORM notifications by checking either or both of the Node Connection Status and the Node Cellular Heath Status checkboxes. Click Apply. When a node connection status changes, a nodeStatusNotif notification is sent, populated with data about the node's connection status, address and name. For information on Structure of notifications for Opengear nodes, refer to OGLIGHTHOUSE-MIB.mib.
EXAMINE OR MODIFY SNMP SERVICE
Administrative users can configure SNMP settings under SETTINGS > SERVICES > SNMP Service. Lighthouse supports both v1/v2 and v3 SNMP versions, which can be running at the same time. The SNMP service is not enabled by default. The SNMP service starts after it has been configured correctly. If the user does not provide an Engine ID, an auto-generated ID displays. Lighthouse Health statistics (load/uptime/memory usage, etc.) can be retrieved.

23.04.0

Setting up Lighthouse

To enable SNMP Service: 1. Select the Enable checkbox. 2. Choose from the v1/v2c and v3 checkboxes. 3. Fill in the appropriate information for the SNMP versions. 4. Click Apply.
CELLULAR HEALTH SETTINGS
Administrative users can control the cellular health reporting settings under SETTINGS > SERVICES > Cellular Health Reporting.

23.04.0

Setting up Lighthouse

When cell health checks are enabled, the network carrier, IMEI, IMSI and ICCID of the downstream SIM being utilized are part of the information that is displayed in Lighthouse for managed nodes
If a managed node has the modem disabled/off, an appropriate status is shown in Lighthouse for the node.
l Check the Enable box to enable Cellular Health monitoring. l If required, adjust the signal quality ranges corresponding to Good, Bad, and
Moderate. This will change the Cellular Health information displayed in various node lists and on the Dashboard. l Adjust how frequently Lighthouse will check the signal quality. l Finally, you can run a periodic Cellular Connectivity Test which will make sure the cellular can actually connect. This will use cellular data.

CELLULAR HEALTH DASHBOARD

The current health status of enrolled nodes can be viewed from the Cellular Health Dashboard: MONITOR > Dashboard. Click on a segment of interest to open the Node Web UI page which displays Node health information:

23.04.0

Setting up Lighthouse

CHANGING DOCKER IP RANGES
Docker powers the NetOps platform within Lighthouse. By default, Docker and NetOps utilize the 172.17.0.0/16 and 172.18.0.0/16 subnets. This has the potential to cause collisions inside of some networks. To avoid this, you can change these settings.

23.04.0

Setting up Lighthouse

To update Dockers subnet, you need to alter 2 parameters, Docker's default subnet and the NetOps modules subnet. To do so:
Login to the Lighthouse shell CLI as a Lighthouse Administrator or the root user
Ascertain the number of running containers to ensure you select an appropriate subnet size

sudo docker ps -q | wc -l

Open a config CLI session on the Lighthouse Server and run the following to enter configuration management

ogconfig-cli

Set the IP Range of the Docker subnet in CIDR format

set services.nom.default_subnet "10.123.17.1/24"

Set the IP Range of the NetOps subnet in CIDR format

set services.nom.netops_subnet "10.123.18.0/24"

Push the config to become the running config

push

Exit the configuration management

exit

Restart Docker

sudo /etc/init.d/docker.init restart

23.04.0

Setting up Lighthouse

Restart the NetOps Module(s)
sudo /etc/init.d/docker.init reset
Note: The network mask selected for these subnets limits the maximum number of containers that can run on Lighthouse. NetOps currently runs up to approximately 10 containers.
LIGHTHOUSE MIBS
Lighthouse management information bases (MIBs) can be found in /usr/share/snmp/mibs/. Lighthouse can be configured to expose managed node information such as node name, node model number, node port label, license status, etc. via SNMP. The MIBs turn the SNMP data into text, that is more readable to human readers. Some generic information about Lighthouse version and nodes count can be found at:

Available information for an enrolled Opengear node ogLhNodesTable:

23.04.0

Setting up Lighthouse

Available information for an enrolled third-party node

To query licensing information:

23.04.0

Setting up Lighthouse

To query enrolled node cellular health information: ogLhNodeCellularHealth
SNMP commands such as snmpwalk or snmpgetretrieve Lighthouse specific information. Setup: SNMP is configured with version 1 and public is community string Lighthouse public IP address is 192.168.1.1 All MIBs, including Lighthouse MIB are available in /usr/share/snmp/mibs

23.04.0

Setting up Lighthouse

EXAMPLES OF LIGHTHOUSE MIB QUERIES USING SNMP:
Walk through the entire ogLighthouseMib using name:
snmpwalk -m ALL -v1 -c public 192.168.1.1 ogLighthouseMib snmpwalk -m ALL -M /usr/share/snmp/mibs -v1 -c public 192.168.1.1 ogLighthouseMib
Walk through the entire ogLighthouseMib using the OID directly:
snmpwalk -m ALL -M /usr/share/snmp/mibs -v1 -c public 192.168.1.1 1.3.6.1.4.1.25049.18.1
Get the total nodes enrolled in Lighthouse:
snmpget -m ALL -v1 -c public 192.168.1.1 ogLhNodesTotal.0 snmpwalk -m ALL -v1 -c public 192.168.1.1 ogLhNodesTotal
Get serial number with enrolled node having VPN address 192.168.128.2:
snmpwalk -m ALL -v1 -c public 192.168.1.1 ogLhNodeSerialNumber.192.168.128.2 snmpget -m ALL -v1 -c public 192.168.1.1 ogLhNodeSerialNumber.192.168.128.2
Get cellular health for all enrolled nodes:
snmpwalk -m ALL -c public -v 1 192.168.124.143 ogLhNodeCellularHealth OG-LIGHTHOUSE-MIB::ogLhNodeCellularHealth.192.168.128.2 = INTEGER: good(4) OG-LIGHTHOUSE-MIB::ogLhNodeCellularHealth.192.168.128.3 = INTEGER:

23.04.0

Setting up Lighthouse

good(4) OG-LIGHTHOUSE-MIB::ogLhNodeCellularHealth.192.168.128.4 = INTEGER: bad(2) OG-LIGHTHOUSE-MIB::ogLhNodeCellularHealth.192.168.128.5 = INTEGER: unknown(0) OG-LIGHTHOUSE-MIB::ogLhNodeCellularHealth.192.168.128.6 = INTEGER: bad(2)
SETTING UP MULTIPLE INSTANCES OF LIGHTHOUSE
This chapter discusses the licensing, setup, configuration, promoting and disconnecting of secondary instances, and upgrading of a multiple instance Lighthouse. The multiple instance functionality allows you to set up secondary or dependent instances of Lighthouse that automatically receive updates from a primary Lighthouse instance and maintains connections to all its remote nodes. Secondary instances are read-only. They may be used to view Lighthouse information specific to that instance using ogconfig-cli, and to connect via pmshell.
Configuration changes must be performed on the primary instance, which will then update the information displayed on the secondary instance. For more details, see Lighthouse Architecture in "Lighthouse Overview" on page 18

23.04.0

Setting up Lighthouse

SETTING UP A MULTIPLE INSTANCE
Lighthouse supports up to 10 secondary instances for each primary Lighthouse instance. A secondary instance is also known as a dependent instance. Before you attempt to set up a multiple instance: l Start with what will be the primary instance and one or more Lighthouse
instances to act as secondary. All instances must have the same version of Lighthouse. l Configure the networking information for each instance (hostname, external endpoints, network addresses, REST API port). l Configure the time settings of each instance. l Ensure you have a subscription active on your primary Lighthouse.

23.04.0

Setting up Lighthouse

To set up a multiple instance feature on the primary Lighthouse:
1. On the primary Lighthouse, click Configure > MULTIPLE INSTANCE > Dependent Lighthouse Instances.

2. Click Add. Enter the following details of a Lighthouse instance to enroll it as a secondary instance: Description Network address Network port Username Password In the VPN Network Range enter a valid, unused network subnet to use as the dependent lhvpn address range. See "Configuring Subnets for a Multiple Instance Lighthouse" on page 95.

23.04.0

Setting up Lighthouse

Note: The secondary Lighthouse instance must be able to reach the primary instance on UDP Port 1195.
3. Click Apply. 4. Dependent Lighthouse Enrollment displays status as it moves from Pending >
Registered > Enrolled. 5. When the VPN connection is established between primary and secondary
Lighthouse, this page will display Connected with the time since the last status change and Disconnected when the connection is lost. Any errors in the Enrollment process will display in the status column.

23.04.0

Setting up Lighthouse

ENABLING ALTERNATE REST API PORTS
If you are planning to use the alternate REST API ports, you will need to make sure this option is enabled on both the primary and dependent Lighthouse servers, prior to Enrollment of the dependent(s). Lighthouse will prevent the Enrollment of a dependent Lighthouse instance if there is a mismatch in these settings. If this occurs, the message "Lighthouse is using Alternate API port" will be displayed on the Dependent Lighthouse Instances page.
To fix the issue, either
l Enable the Alternate REST API port on both Lighthouse servers, or l Disable the Alternate REST API port on both Lighthouse servers, then delete the
failed Lighthouse Enrollment and try again.
The Alternate REST API Port is configured as follows:
1. Select Settings > Services > Session Settings. The page displays:

2. Select Enable additional enrollment-only REST API port.

Note: The alternate REST API Port for enrollment is 8443

23.04.0

Setting up Lighthouse

CONFIGURING SUBNETS FOR A MULTIPLE INSTANCE LIGHTHOUSE
A Lighthouse with multiple instance support requires multiple separate subnets for Lighthouse VPN connections: l Between each instance and its nodes l Between the primary and dependent Lighthouses.
Note: Each subnet must not overlap any subnet in use by another Lighthouse instance.

23.04.0

Setting up Lighthouse

CONFIGURING THE SUBNETS
To configure the subnet between the primary Lighthouse and its nodes: 1. Select SETTINGS > SERVICES > Lighthouse VPN on the primary Lighthouse.

Calculated Node capacity displays the addressable nodes based on the network Address Space and CIDR Mask.
Note: A secondary Lighthouse is read-only and cannot be modified. The SETTINGS > SERVICES > Lighthouse VPN page displays the subnet used by this Lighthouse instance, but it cannot be modified directly.
2. To configure the subnet between each secondary Lighthouse and its nodes select CONFIGURE > MULTIPLE INSTANCE > Dependent Lighthouse Instances.

23.04.0

Setting up Lighthouse

3. The Dependent Instances page displays. Click on the name of the dependent Lighthouse to be modified.
4. The Edit Dependent Lighthouse page displays.

23.04.0

Setting up Lighthouse

Other information that is specific to dependent Lighthouse should be configured before enrolling but can be modified on the primary Lighthouse via ogconfigcli.
Instance specific information includes: Hostname Time zone Networking External interfaces The instance specific information is available on both the primary and secondary Lighthouses but it is read-only on the secondary Lighthouse. Configurations of all Lighthouse instances are stored in lighthouse_ configurations. These can be viewed via ogconfig-cli. The primary instance will have a value of Primary for its role, and dependent instances have the value Secondary. The following is an example of the ogconfig-cli session: 5. root@lighthouse:~# ogconfig-cliogcfg> print lighthouse_configurations[0].rolelighthouse_configurations[0].role (string): 'Primary'ogcfg> print lighthouse_configurations[1].rolelighthouse_configurations[0].role (string): 'Secondary'
Alternatively, the command /usr/bin/is_secondary will output n for a primary Lighthouse or y for a secondary. 6. You can modify the configuration of secondary lighthouses from the primary Lighthouse. For example, to update the hostname of the secondary Lighthouse, run the following commands on the primary Lighthouse:

23.04.0

Setting up Lighthouse

ogconfig-cli set lighthouse_configurations[1].hostname new_name push
DISCONNECTING A SECONDARY INSTANCE
To disconnect Dependent Lighthouse instances from the primary Lighthouse: 1. Click CONFIGURE > MULTIPLE INSTANCE > Dependent Lighthouse
Instances, and click the instance name. 2. The secondary Lighthouse displays. Click the Unenrol Instance icon in the top
right of the page.

3. Click Yes in the message that asks you to confirm. 4. You must manually remove the connection to the secondary Lighthouse from
each connected node. Click the Delete link in the Console Server.

23.04.0

Setting up Lighthouse

PROMOTING A SECONDARY INSTANCE
When a primary Lighthouse is no longer reachable, a secondary Lighthouse instance can be promoted to primary. The new primary can then be used to enroll a secondary Lighthouse if required.
Note: This should only be performed if the primary Lighthouse has no chance of returning, the procedure is not reversible and will break all node connections with the previous primary instance. The previous primary instance must be factory reset before it can be used again.
To promote a secondary instance to primary, login as root on the secondary instance via console or ssh and run promote-secondary-lighthouse Remove all dead connections from node side using the node's web UI. The Promotion tool deletes connection between primary and secondary instance but does not touch node connections. The new primary can then be used to enroll a secondary Lighthouse if required.
Note: If the previous primary becomes accessible again, it will not be able to connect to its enrolled nodes or the previous secondary Lighthouses.
l All scheduled firmware upgrades are cancelled in the event of a secondary Lighthouse promotion, and will need to be rescheduled.
l Firmware files are not replicated among the multiple instance cluster and must be re- uploaded to the new primary after promotion.

23.04.0

Setting up Lighthouse

100

UPGRADING A MULTIPLE INSTANCE LIGHTHOUSE
Lighthouse must be upgraded in succession. For example, to upgrade to a version that is several releases newer than your current release, you will need to install all the major releases in between to install the newest one.
Before a multiple instance upgrade is attempted, compatibility and status checks are performed on primary/secondary instances to pre-empt possible failure points.
Secondary Lighthouse upgrades are performed in parallel (not in a queue) to speed up the overall process of rolling upgrades.
Where there are multiple instances of Lighthouse, when a system upgrade is being performed the status of dependent instances is flagged in the System Upgrade page.
When the primary Lighthouse is updated, any secondary Lighthouses will be updated in a rolling fashion after the primary has successfully booted. If any Lighthouse fails to successfully update along the way, the update will stop.

23.04.0

Setting up Lighthouse

101

UPGRADING DEPENDENT MULTIPLE INSTANCES OF LIGHTHOUSE
To upgrade a Multiple Instance Lighthouse:
When the primary Lighthouse is upgraded any secondary Lighthouses will be upgraded in a rolling fashion after the primary has successfully booted. If any Lighthouse fails to successfully upgrade along the way, the upgrade will stop.
Click the Dependent Lighthouses link (red text) to view the upgrade process status for dependent Lighthouse nodes. Click View Job Details link to see details of the update progress and any problems.

During a system upgrade, notification/status elements are flagged in the following scenarios:
l When an upgrade is attempted, a pass/fail notification on the instance. l When an upgrade is attempted on a secondary instance, a pass/fail notification
on the associated primary instance.
Information about the upgrade progress and status is visible in the Lighthouse Jobs page.

23.04.0

Setting up Lighthouse

102

UPGRADING LIGHTHOUSE
Lighthouse can be upgraded using a .lh_upg image file. Note the following conditions: l AWS requires .aws.lh_upg and Microsoft Azure requires .azure.lh_upg. All
other platforms use the standard .lh_upg file. l Due to disk restructuring, there were no lh_upg files for 20.Q3.x. l Incremental upgrades to Lighthouse using lh_upg files are only supported from
20.Q3.x and not earlier releases. Although upgrades do not overwrite existing configurations or user files, you should perform a Configuration Backup prior to upgrading. Once the upgrade is complete, the Lighthouse instance reboots. It is unavailable during the reboot process.
UPGRADING THE SYSTEM FROM WITHIN LIGHTHOUSE
Lighthouse must be upgraded in succession. For example, to upgrade to a version that is several releases newer than your current release, you will need to install all the major releases in between to install the newest one. To upgrade a Lighthouse instance's system using the Lighthouse UI: 1. Select SETTINGS > SYSTEM > System Upgrade.

23.04.0

Setting up Lighthouse

103

2. Select the Upgrade Method, either Fetch image from HTTP/HTTPS Server or Upload Image.

3. If upgrading via Fetch image from HTTP/HTTPS Server: a. Enter the URL for the system image in the Image URL text-entry field. b. Click Perform Upgrade.
4. Or if upgrading via Upload Image: a. Click the Choose file button. b. Navigate to the directory containing the appropriate upgrade image file. c. Select the upgrade image file and press Return. d. Click Perform Upgrade.

23.04.0

Setting up Lighthouse

104

The Advanced Options section, which expands to present an Upgrade Options text-entry field, should only be used if a system upgrade is being performed as part of an Opengear Support call. Once the upgrade has started, the System Upgrade page displays feedback as to the state of the process. A system upgrade attempt returns the error System version was not higher than the current version if the selected image file is not a more recent version than the installed version.
UPGRADING THE LIGHTHOUSE SYSTEM VIA THE LOCAL TERMINAL
Lighthouse includes a shell-based tool -- sysflash -- that allows a user with administrative privileges to upgrade the instance's system from the local terminal.
Note: Before using sysflash, we recommend that you check available disk space when manually uploading .lh upgrade files. We also suggest you use /mnt/nvram as the path.
To upgrade Lighthouse instance's system using the Lighthouse local terminal: 1. Select MANAGE > LIGHTHOUSE > local terminal. 2. At the [hostname] login: prompt, enter an administrator username and
press Return. 3. At the Password: prompt, enter the administrator's password and press
Return. 4. To use sysflash with a .lh_upg file available via an HTTP or HTTP server:
At the local terminal bash shell prompt, enter a URL. It must be URL-encoded:

23.04.0

Setting up Lighthouse

105

sysflash http[s]%3A%2F%2Fdomain.tld%2Fpath%2Fto%2Ffirmwareupgrade- image.lh_upg 5. Press Return. To use sysflash with a .lh_upg file available via the local file system: 1. At the local terminal bash shell prompt enter:
sysflash /path/to/system-upgrade-image.lh_upg. 2. Press Return.
Note: sysflash includes several flags that allow for variations in the standard system upgrade process. These flags should not be used unless directed to do so by Opengear Support.
List the flags by running either of the following at a local terminal bash shell prompt: sysflash -h or sysflash --help For more information on sysflashSee the Command line tools chapter.
UPGRADE NETOPS MODULES
NetOps Modules are released independently of Lighthouse software or Operations Manager firmware. NetOps releases are uploaded to Opengear's file server, where they can be fetched by Lighthouse then deployed to all activated nodes by Lighthouse. Node upgrades may be carried out through either the Lighthouse UI or the CLI. PROCEDURE for Lighthouse UI

23.04.0

Setting up Lighthouse

106

1. Log in to the Lighthouse web UI as a Lighthouse Administrator or the root user. 2. From the menu, select SETTINGS > Services > NetOps Modules.Select either
Online or Offline.
3. Click the Synchronize icon. A message displays with the status.

4. From the menu, select CONFIGURE NODES > NetOps Modules > Manage Modules.

5. Click the Redeploy icon.

23.04.0

Setting up Lighthouse

107

PROCEDURE for Lighthouse CLI Replace root and default with a Lighthouse Administrator or root credentials, then run the following:
USERNAME=root PASSWORD=default /etc/scripts/netops_sync_handler token=$(curl -k -L -d ' {"username":"'$USERNAME'","password":"'$PASSWORD'"}' "https://127.0.0.1/api/v3.0/sessions/" | python -c 'import sys, json; print json.load(sys.stdin)["session"]') curl -k -L -H "Content-Type: application/json" -H "Authorization: Token $token" "https://127.0.0.1/api/v3.0/netops/modules/dop/redeploy"

CONFIGURATION BACKUP
Before performing a factory reset or system upgrade, you may want to backup the current Lighthouse configuration. To do so: 1. Select SETTINGS > SYSTEM > Configuration Backup.

23.04.0

Setting up Lighthouse

108

2. If desired, check Encrypt backup. Enter and confirm a password. 3. Under the Advanced section, specify the paths to any User Files you also wish
to include in the backup. 4. Click Download Backup and save this file. The filename consists of a timestamp
and lh_bak extension, for example: lighthouse-20190710100325.lh_ bak
CONFIGURATION RESTORE
To restore the configuration and user files you backed up using Configuration Restore: 1. Select SETTINGS > SYSTEM > Configuration Restore.

23.04.0

Setting up Lighthouse

109

2. Locate the file you downloaded when you performed the Configuration Backup. 3. If you chose Encrypt backup when creating the backup, enter the Backup
Password. 4. Click Restore Backup. 5. A Configuration Restore Confirmation dialog opens, click Yes.

6. Lighthouse will restore the backup and any included user files and restart.

SHUT DOWN OR RESTART LIGHTHOUSE
The following sections describe the process to shutdown or restart Lighthouse. This includes finding instance version, returning to factory setting, and shutting down or restarting a running version of Lighthouse.

FINDING THE CURRENT LIGHTHOUSE INSTANCE VERSION
There are two ways to find the current Lighthouse version. Using Lighthouse 1. Click System & Subscriptions on the Lighthouse banner. 2. The Details menu displays, listing the Lighthouse instance's:
l Current version l REST API version l Hostname, and

23.04.0

Setting up Lighthouse

110

l Current user.

Via the local Lighthouse shell 1. Click MANAGE > LIGHTHOUSE > Local Terminal 2. At the [hostname] login: prompt, enter an administrator username and
press Return. 3. At the Password: prompt, enter the administrator's password and press b. 4. At the bash shell prompt, enter cat /etc/version and press Return. The current Lighthouse instance's version is returned to STD OUT. For example: root@lighthouse:~# cat /etc/version 2022.Q1.0
Note: The procedure above uses the Web UI to reach the Lighthouse Local Terminal. This is not the only way to reach the Lighthouse shell and cat /etc/version works in any circumstance where an administrator has access to the Lighthouse shell. For example, many of the Virtual Machine Manager applications that can run a Lighthouse instance offer virtual console access. If this is available and an administrator logs in to the Lighthouse shell via this console, the command string works as expected.
Via other information sources Two other command strings can be useful when specifics about a particular Lighthouse instance are needed. Both these commands can be run by an administrator with access to a running Lighthouse instance's bash shell.

23.04.0

Setting up Lighthouse

111

First is cat /etc/sw*. This command concatenates the following four files to STD OUT:
/etc/sw_product /etc/sw_variant /etc/sw_vendor /etc/sw_version
For example:
# cat /etc/sw* lighthouse release opengear 2022.Q1.0
Second is cat /etc/issue. /etc/issue is a standard *nix text file which contains system information for presenting before the system's login prompt. On a Lighthouse instance, /etc/issue contains the vendor and Lighthouse product version.
# cat /etc/issue Opengear Lighthouse 2022.Q1.0 \n \l
SHUT DOWN A RUNNING LIGHTHOUSE INSTANCE
To shut down a running Lighthouse instance: 1. Select MANAGE > LIGHTHOUSE > Local Terminal

23.04.0

Setting up Lighthouse

112

2. At the Local Terminal login prompt enter a username with administrative privileges (for example, root). 3. At the Password: prompt, enter that account's password. A Last login date and time for that account are returned to STD OUT and a shell prompt for the logged in user displays. 4. Enter the command shutdown now and press Return. The Lighthouse virtual machine shuts down.
RESTARTING A RUNNING LIGHTHOUSE INSTANCE
To restart a running Lighthouse instance, follow the first three steps of the "Shut Down or Restart Lighthouse" on page 110 instance procedure above. At the shell prompt, enter one of these commands and press Return: reboot or shutdown -r now The Lighthouse virtual machine shuts down and reboots.

23.04.0

Setting up Lighthouse

113

RETURNING A LIGHTHOUSE INSTANCE TO FACTORY SETTINGS
At some stage, you may need to return to the factory settings. You can do this either through the UI or by running a shell script if you have root access.
Note: During this process, the current Lighthouse configuration will be overwritten and user files will be deleted. If you wish, you can create a backup of the configuration and any desired user files.
To return a Lighthouse to its factory settings using the Lighthouse UI: 1. Login to the Lighthouse as root. Other users, even those with full administrative
privileges, do not have the permissions required to reset the Lighthouse VM to its factory settings. 2. Select SETTINGS > SYSTEM > Factory Reset.

3. Select the Proceed with the factory reset checkbox. 4. Click Reset.

23.04.0

Setting up Lighthouse

114

MANAGING LIGHTHOUSE NODES
After Lighthouse has been installed and configured, enrol a small set of nodes, then create a set of tags and smart groups that allow nodes access to be filtered to the correct subset of users. Once these nodes are installed, test access to the Node's Web UI and serial ports. This section covers: l Enrolling nodes l Filtering pages displaying nodes l Creating and editing Smart Groups l Creating and editing ports l Connecting to a node's web management interface l Connecting to a node's serial ports via Console Gateway
MONITOR NODES
Lighthouse allows you to view all nodes including connected, not connected, enrolled, and pending, as well as nodes using cellular. MONITOR > Nodes displays the cellular health and number of ports. Click the icon on the right of connected nodes to access the Web UI of the node.

23.04.0

Managing Lighthouse Nodes

115

1. Select MONITOR > Nodes.

2. Use the SORT BY menu to sort the display of nodes, by Status Change, Name or Connected Devices, in ascending or descending order, or newest or oldest.
3. Use the FILTER BY menu to display the nodes by a selected Smart Group. 4. Use the Status menu to display the nodes by Any status, Connected, Connected
via Cellular, Disconnected or Pending. 5. Use the Free Text Search to Search using a text string. You can also search by
Port tags. 6. The Monitor Nodes page displays the result of the search on the page.
Click on any connected node to view the node details, list of configured ports and unconfigured ports.

23.04.0

Managing Lighthouse Nodes

116

From this detail page, you can access the web UI of the node, as well as the web terminal and SSH of each connected device.
MONITOR PORTS
Lighthouse allows users with the appropriate permissions to view ports on a node to get a quick snapshot of the health of the nodes. For example, to trace a fault on a node, a network engineer will want to investigate the latest logs for a port. 1. Select MONITOR > Nodes. A list of nodes displays, each node displays the total
number of ports/configured ports. 2. Click on the required node. The Node page displays node information including
lists of Configured Ports and Unconfigured Ports, Network Info, Cellular details, Node tags and Node details.

23.04.0

Managing Lighthouse Nodes

117

3. The drop down allows you to select to Show All, Configured Ports, orUnconfigured Ports on the node.
4. If the node has been configured to display logs, and you have the correct permissions you can select Port Logs.
5. The Port Logs page displays.

Select the Port from the list, and specify the date range (Start Date and End Date) to view the logs that display in the log window below. You can also access the web terminal and SSH of each connected device.
6. Alternatively, you can search for a log with a particular text, using the Filter Log Contents Logs matching the search parameter display in the log window.

23.04.0

Managing Lighthouse Nodes

118

7. You can also download the displayed logs, or open a new window to view the logs in more detail.
FILTERING PAGES DISPLAYING NODES
If you want to quickly find a particular node or set of nodes, you can drill down to specific nodes by using BASIC and ADVANCED filters. The filters can be used independently from each other or in combination to create customized displays based on ports, devices and permissions. Select MANAGE > MANAGED DEVICES > Console Gatewayto display all the nodes with all the devices/ports.

FILTERING USING THE FREE TEXT SEARCH FIELD
The Free Text Search input field allows near real-time filtering of nodes and managed devices using the following criteria: l Node name l Firmware version

23.04.0

Managing Lighthouse Nodes

119

l Management VPN address l MAC address l Serial number and l Port label l Port tag Enter your search term in the Free Text Search field and press Enter. The Free Text Search field treats multiple search terms separated by the space character as being combined with the logical AND operator, returning results only if all terms are present in the item. For example, the search phrase production switch returns only nodes that contain both production AND switch anywhere in searchable fields. To search for a multi-word term, enclose the search term in double quote characters. For example, "production switch" will return results only if the entire search term is matched in the item.

23.04.0

Managing Lighthouse Nodes

120

FILTERING USING SMART GROUPS
Use MANAGE > MANAGED DEVICES > Console Gateway to customize the node display.

On the ADVANCED FILTER pane, on the Smart Group Filtering pane, use the Select Smart Group dropdown list. Select a group from the list and the page displays the nodes that belong to the selected smart group. Use Fields to search to narrow the search: To add more filtering options: 1. Click Field to search. 2. Select a field and enter a Value in the text box. 3. Select an Operator from the drop-down box. 4. Enter the search criteria. 5. Click Apply.
The list of nodes that meet the specified criteria display.

23.04.0

Managing Lighthouse Nodes

121

6. Click the + Add Parameters button to add more AND/OR parameters. Repeat from step 1.

23.04.0

Managing Lighthouse Nodes

122

FILTERING NODES USING THE PORT FILTER
Use MANAGE > MANAGED DEVICES > Console Gateway to customize the node display.
On the ADVANCED FILTER pane, on the Port Filter pane, use theSelect Port Filter dropdown list. Select a filter from the list and the page displays the nodes that belong to the selected Port Filter.

To narrow the search:
1. Click Field. 2. Select a field option such as Port Label or Port Tag and enter a Value in the text
box. 3. For Port Label you can select an Operator from the drop-down box on the right. A
range of operators are available allowing you to define any filters from very wide to very narrow ranges. 4. If you wish to narrow the search, select +Add Parameters. Select the AND or OR button to specify the requisite boolean value.

23.04.0

Managing Lighthouse Nodes

123

5. Select the next Field to Search option such as Port Tag and enter a value in the text box.
6. You can repeat from step 4 to add more parameters. 7. Click Apply Filter. 8. Click Save Changes. You can also select to Clear.
ENROL NODES
Enrolling nodes is the process of connecting nodes to Lighthouse to make them available for access, monitoring, and management. Enrollment can be performed via: l the Lighthouse Web UI l the Node Web UI l ZTP l USB key. Credentials must be provided to authenticate either the Lighthouse during Enrollment via the Lighthouse WebUI, or the node during the other Enrollment scenarios. The Lighthouse VPN uses certificate-authenticated OpenVPN tunnels between Lighthouse and remote nodes. These tunnels rely on the time being synchronized between the Lighthouse instance and the console server or other remote node. During Enrollment, if a remote node is not relying on an NTP server to set its time, it inspects the HTTP Date header sent by Lighthouse and sets its local time to match that of the Lighthouse instance.

23.04.0

Managing Lighthouse Nodes

124

If a remote node is relying on an NTP server to set its own time, it still checks the HTTP Date header sent by Lighthouse to affect the time synchronization but does not set its local time to that of the Lighthouse instance. When enrolling via Lighthouse, an administration username and password for the node must be provided. When enrolling via the node, an Enrollment token must be provided. A default Enrollment token can be set on the CONFIGURE > NODE Enrollment > Enrollment Settings page, and individual tokens set per Enrollment bundle. Enrollment is a two-step process: 1. Once Enrollment starts, nodes receive their Enrollment package, and establish a
VPN connection to Lighthouse. 2. The node is now in the Pending state and needs to be Approved before the node
is available for access, management, or monitoring.
Note: This second step can be skipped by selecting the Auto-approve node checkbox when configuring an Enrollment bundle.
THE ENROLLED NODES PAGE
The Enrolled Nodes page lists all the enrolled nodes on a Lighthouse instance.

23.04.0

Managing Lighthouse Nodes

125

To display the enrolled nodes:

1. Select CONFIGURE > NODE Enrollment > Enrolled Nodes 2. The enrolled nodes display in the chronological order in which they were enrolled
to Lighthouse. For each node, the following details display: l model l firmware version l serial number l status.

Click Items per page to select the number of nodes per page. Choose

a default value of 10, 20, 50, 80, or 100 nodes per page, or enter a

custom value between 1 and 100.

This setting applies to the current user session only and will be lost

when the current user logs out.

Note: Items per page also displays on the Pending Nodes, Console Gateway, and Node Web UI pages.

23.04.0

Managing Lighthouse Nodes

126

4. Status is the current connection status of the node and displays either of two things:
l Connected: Last status change x [time unit] ago: The time since Lighthouse connected to the console server.
l Disconnected: last status change x [time unit] ago: The time since Lighthouse disconnected from the console server.
l Configuration Retrieval Status displays if any configuration retrieval sections failed when performing a configuration sync with this node, such as Groups, Users, Node Description, Authorization, or Serial Ports.
l Configuration Template Run Status displays the result of the most recent configuration template push on this node, listing which templates finished applying, or failed to apply to the node. This information is displayed until the next template push has completed on this node.

Note: The Configuration Retrieval Status and Configuration Template Run Status are not displayed if there is no relevant data to display and are only displayed for users with Lighthouse Administrator or Node Administrator permissions.

l Results of the Configuration Retrieval Status and Configuration Template Run Status indicate:

l Success: all templates were successfully executed on the node.

l Partial Failure: some templates failed to execute on the node, or some config sections failed to synchronize.

l Failure: all templates failed to execute on the node, or all config sections failed to synchronize.

You can select a summary of each status to see more detailed information as follows:

23.04.0

Managing Lighthouse Nodes

127

l Retrieval failed for: section_name, section_name, section_name.
l Template(s) failed to apply: template_name, template_name, template_name.
l Template(s) successfully applied: template_name, template_name, template_ name.
5. If SETTINGS > SERVICES > Cellular Health Reporting is Enabled, the Cellular Health column displays the node's current cellular status. If this state is Good|Moderate|Bad, click the color indicator or the text to view more detailed health information as follows:

l Cellular IP Address (IPv4 and IPv6) l Cellular interface status (Up|Down) l Conditions l Signal Quality l RSSI l Connection Type l SIM Issues l Connectivity Test (Passed|Failed|Connectivity Test
Disabled)
6. The INFO column displays more details about each node. Click Show Details to see more information about the node, or Hide Details to display fewer details.

23.04.0

Managing Lighthouse Nodes

128

ENROLLMENT BUNDLES
An Enrollment bundle is a downloadable file that stores provisioning information, allowing for bulk Enrollment and manipulation of remote nodes. Applying an Enrollment bundle during Enrollment allows tags to be associated with nodes when they're first enrolled, rather than manually assigning tags after the nodes are enrolled. This is useful for larger roll outs where there are many nodes deployed with a similar configuration and responsibilities. If relevant Smart Groups and tags have been set up, newly enrolled nodes are immediately visible for the relevant users to configure and use. Associating templates with an Enrollment bundle allows to run a set of templates on a node, after it has been enrolled. Any template defined on the Lighthouse can be added to an Enrollment bundle, and each bundle supports any number of templates.
ASSIGNING SUBSCRIPTIONS
When a user has subscribed to Enterprise Edition, Enterprise Automation Edition, or both then assigning a subscription type to the bundle will be necessary. Based on the feature set for the node to utilize, this will mean they might need to create two bundles: l An Enterprise tier subscription bundle to enrol nodes, and perform other basic
functions (set up AAA, run scripts, create groups/users, set up logging, etc) l An Automation Edition tier subscription allows all basic functions of the enterprise
plus advanced feature set Automation Gateway, and Secure Provisioning for assigned nodes.

23.04.0

Managing Lighthouse Nodes

129

CREATING AN ENROLLMENT BUNDLE
To create an Enrollment bundle in a Lighthouse instance: 1. Select CONFIGURE > NODE Enrollment > Enrollment Bundles

23.04.0

Managing Lighthouse Nodes

130

2. Click the + button. The Enrollment Bundle Details page displays.

3. Enter a Name and Authentication Token for the bundle in the respective fields.
4. Select the number of Tags and Values to apply to any nodes that enroll using this Enrollment bundle.
5. (Optional) Select the Auto-approve node checkbox. When this is checked, a device configured using this Enrollment bundle is not placed in pending mode during the Enrollment process. Instead, it is automatically approved for Enrollment after it has been identified.
6. Select the desired Subscription Bundle Label - Lighthouse Enterprise Edition or Lighthouse Automation Edition.This is the desired subscrption type to assign

23.04.0

Managing Lighthouse Nodes

131

to newly enrolled nodes using this bundle (optional when more than one subscription is active on the Lighthouse).
7. You can also use this bundle to automatically activate NetOps modules for any supported nodes. Scroll down to the NETOPS MODULES section and press the + button to open the MODULE DETAILS dialog.

8. Select the desired Module Name from the drop-down list. Click Apply. With the Enrollment bundle named, use the Enrollment BUNDLE NODE TAGS to populate it with the desired name-value pairs: 1. Select a field name from the left-most drop-down menu. 2. Select or enter a value from the right-most drop-down menu. 3. Click the + button to add a new pair of drop-down menus. 4. Select another field name and select or enter another value. 5. Repeat until all desired name-value pairs are displayed. 6. Click Apply. With the Enrollment bundle named, use the TEMPLATES to populate it with the desired list of templates to be applied post-Enrollment:

23.04.0

Managing Lighthouse Nodes

132

1. Click the + button to add a new pair of drop-down menus. 2. Select a value from the Template Type menu. The selected template type filters
the available names to those templates of that type. 3. Select a value from the Template Name menu. 4. Repeat until all desired type-name pairs are displayed. 5. Click Apply. The templates in the table can be reordered using the arrow buttons in the far-left column of the table and are executed in the order they appear. The order buttons appear if there is more than one template in the table. Template push operations stop if one template fails.

STRUCTURE OF AN ENROLLMENT BUNDLE
An Enrollment bundle file, manifest.og, contains a series of field-value pairs that an unconfigured device can use to configure itself. Options that can be set in manifest.og include new firmware, custom configuration scripts, OPG config files, and Lighthouse Enrollment details. By default, manifest.og includes the following field-value pairs (with example values):

address=192.168.88.20 api_port=4443 bundle=bne-dc password=secret

Custom field-value pairs can be added manually. The field names are potential field

names for a real-world, customized file, but the values following each field name are

examples:

23.04.0

Managing Lighthouse Nodes

133

script=configure_ports.sh image=acm7000-3.16.6.image external_endpoints=192.168.1.2:4444,192.168.1.3:4445
ENROLLING NODES
Enrolling nodes is the process of connecting nodes to Lighthouse to make them available for access, monitoring, and management. A node is a device that can be enrolled with Lighthouse, allowing it to be accessed, managed, and monitored.
ENROLLMENT VIA NODE WEB UI
If a node is behind a firewall, Lighthouse cannot initiate an Enrollment. The node must be enrolled from the Node Web UI. 1. Log into the Node Web UI. 2. Select Serial & Network > LIGHTHOUSE. 3. Enter the Server Address of Lighthouse (which can be hostname, FQDN, or IP
address) 4. Optionally, enter the Server Port. 5. Enter the Enrollment Bundle (if a specific bundle is being used), and the
Enrollment Token (either the global token or the bundle-specific token). 6. Select Apply Settings. The Enrollment process begins. After enrollment, the node displays in the Pending Nodes page, with a Status of Approval. Click the Approve icon in the Actions column.

23.04.0

Managing Lighthouse Nodes

134

ENROLLMENT VIA LIGHTHOUSE WEB UI
Enrollment via Lighthouse Web UI only works if the Node is reachable from Lighthouse. To enroll a node: 1. Select Add Node in the top menu bar to open a NEW Enrollment dialog.

2. Select the Product type from the Product menu.

23.04.0

Managing Lighthouse Nodes

135

l An Opengear device l A generic third-party device l An Avocent ACS6000 l An Avocent ACS8000 l An Avocent ACS Classic l A Cisco 2900 Series l A Digi Passport 3. Enter the Network Address, Username, and Password of the node being
enrolled. The Username and Password fields are for the login credentials required by the remote node being enrolled, not the login credentials used to login to the Lighthouse instance. 4. Select the Subscription Type. Each type shows the number of available subscriptions. l Enterprise Edition l Automation Edition. 5. If required, you can also select the Auto-approve node and Run preenrollment connectivity checks. 6. Click Apply Once enrolled, the console server's details are removed from the Pending Nodes page and added to the CONFIGURE > NODE Enrollment > Enrolled Nodes page.

ENROLLING NODES VIA OM, ACM, CM, AND IM WEB UI

Nodes can be enrolled from other UIs such as the Operations Manager(OM) as follows via:

23.04.0

Managing Lighthouse Nodes

136

l OM: Nodes can be enrolled into a Lighthouse instance on OPERATIONS MANAGER Web UI using the CONFIGURE > LIGHTHOUSE Enrollment menu item and the lhvpn-callhome command. See the OPERATIONS MANAGER User Guide for more details.
l ACM, CM and IM: On the Web UI, select Serial & Network > Lighthouse to open the Request Enrollment with Lighthouse Server page.

MASS ENROLLMENT USING ZTP
For mass node Enrolments using ZTP, three new custom DHCP fields are handled by ZTP scripts. These fields contain the URL, Bundle Name and Enrollment Password used in an Enrollment which is kicked off after all other ZTP handling is completed. If a reboot is required because of a config file being provided the Enrollment starts after the reboot. Otherwise it happens immediately. Here is a sample configuration file for the ISC DHCP Server:
option space opengear code width 1 length width 1; option opengear.config-url code 1 = text; option opengear.firmware-url code 2 = text; option opengear.enroll-url code 3 = text; option opengear.enroll-bundle code 4 = text; option opengear.enroll-password code 5 = text; class "opengear-config-over-dhcp-test" { match if option vendor-class-identifier ~~ "^Opengear/"; vendor-option-space opengear; option opengear.config-url "http://192.168.88.1/config.xml"; option opengear.enroll-url "192.168.88.20";

23.04.0

Managing Lighthouse Nodes

137

option opengear.enroll-bundle ""; option opengear.enroll-password "default"; }
Note: The maximum amount of data allowable as DHCP options is 1200 bytes, including all overhead inherent in the structuring of this data. Individual options are limited to 255 characters.

ENROLLMENT VIA USB DRIVE
An unconfigured device can be enrolled using a USB drive loaded with an Enrollment bundle. (See "Creating an Enrollment bundle" on page 130.) Download the Enrollment bundle, manifest.og from a Lighthouse instance as follows: 1. Select CONFIGURE > NODE Enrollment > Enrollment Bundles. A list of
existing Enrollment Bundles displays. 2. In the Actions column of the particular bundle, click the download button, a
downward arrow in a circle. 3. Depending on the browser's configuration, a manifest.og file either
downloads to the local system or displays a dialog asking to specify where to download the file. To enroll a node via USB drive: 1. Copy manifest.og to the root directory on a USB drive. 2. Plug the USB drive into an unconfigured and powered-down console server. 3. Power the console server up.

23.04.0

Managing Lighthouse Nodes

138

On first boot, the device searches for the file -- manifest.og -- on any USB drives attached to the device and configures the device based on its contents.
BACKING UP NODES
Administrative users can enable automatic node backup. Up to 10 backups can be stored on a rolling basis.
Note: Node backup requires firmware 4.6 or later. To set up node backup: 1. Select SETTINGS > SERVICES > Node Backup.

2. Select the Enable checkbox to turn on this service. 3. Under the Storage section, select the Number of stored backups you wish to
keep.

23.04.0

Managing Lighthouse Nodes

139

4. In Retention period after unEnrolment select None, Days or Forever. If you select Days enter the number of days.
5. Enter the Location you wish to store the backup files. We suggest you store backups at /mnt/nvram/.
6. Click Validate to make sure the location exists and has enough space to store them. The Available space, Total Space and Estimated disk usage MiBs display.
7. Click Apply or set a schedule using the Scheduling fields. To setup an automated schedule for performing node backups: 1. Scroll down to the SCHEDULING section.

23.04.0

Managing Lighthouse Nodes

140

2. For the Start time, choose either Immediately or choose Set Time to open editable Date and Time fields.
3. Choose how often you wish to Repeat the backup by selecting either One Time Only or Interval.
4. If you selected Interval, enter the values for Days or Weeks. Note: You can modify these options by returning to SETTINGS > SERVICES > Node Backup at any time.
WORK WITH NODES
After a node has been enrolled, you can connect to it directly, either to monitor it, or to run commands on it, Multiple nodes can be selected.
CONNECT TO THE WEB-MANAGEMENT INTERFACE OF A NODE
After a node has been enrolled, you can connect to the enrolled node's webmanagement interface as follows:

23.04.0

Managing Lighthouse Nodes

141

1. Select MANAGE > NODES > Node Web UI. The nodes display:

2. Click the Access Web UI link for the particular node. The web-based login for that node loads.
3. Authenticate using the username and password required by that node. The appearance of the Web UI depends on which device you have added. Below is the ACM/CM/IM Web UI, followed by the OM Web UI.

23.04.0

Managing Lighthouse Nodes

142

A message displays at the bottom of the browser and provides a link to return to Lighthouse.
CONNECTING TO A NODE'S SERIAL PORTS
You can connect to the enrolled node's serial ports via the Console Gateway option on the user interface if required. This allows the user to directly connect to any devices that are connected to the serial ports of the selected node.

23.04.0

Managing Lighthouse Nodes

143

FIND THE SERIAL PORTS
To search for serial ports on Lighthouse select MANAGE > MANAGED DEVICES > Console Gateway
or

23.04.0

Managing Lighthouse Nodes

144

Select MANAGE > MANAGED DEVICES > Quick Search A page displays all the connected nodes, the right most column displays the number of devices connected to the node.

The Items per page drop-down on Quick Search page allows the user to select the number of ports per page. This setting applies to the current user session only and will be lost when user logs out.
Note: Port-centric search allows filtering via the Managed Device Filters and displays a list of ports within enrolled nodes that match the search terms, while node-centric search allows filtering via Smart Groups and node properties. Quick Search can be used to filter on the managed device label.

23.04.0

Managing Lighthouse Nodes

145

NODE-CENTRIC SEARCHING
1. Select MANAGE > MANAGED DEVICES > Console Gateway. 2. Find the particular port using the Smart Group Filtering options to restrict the
listed nodes. 3. Click the + button in the Access Console Ports row adjacent the particular
node.
PORT-CENTRIC SEARCHING
1. Select MANAGE > MANAGED DEVICES > Console Gateway. 2. Find the particular port by using the Managed Device Filtering options to restrict
the listed managed devices within enrolled nodes. Once the serial port is located, serial port access via Console Gateway can be accomplished in two ways: l Web Terminal l SSH

23.04.0

Managing Lighthouse Nodes

146

QUICK SEARCH
1. Select MANAGE > MANAGED DEVICES > Quick Search. 2. Enter the managed device label, aka name, in the Quick Managed Device
Search field. This search live-updates as user type.
3. Use Web Terminal and/or SSH links on a particular port to access it.

23.04.0

Managing Lighthouse Nodes

147

ACCESS VIA HTML5 WEB TERMINAL
To provide easy console port access, Lighthouse includes a HTML5 Web Terminal. The HTML5 Web Terminal includes native cut, copy and paste support. The terminals available on nodes do not.
To access a console port via the Web Terminal:
1. Locate the particular port by using one of the search techniques described in "Connecting to a node's serial ports" on page 143.
2. Click the Web Terminal link for the particular port. A new tab opens containing the Web Terminal.
To close a terminal session, close the tab, or type ~. in the Web Terminal window.

23.04.0

Managing Lighthouse Nodes

148

ACCESS A SERIAL PORT VIA SSH
To access ports via SSH, use a direct SSH link from the Web UI to connect to the port. To access a console port via a Direct SSH link: 1. Locate the particular port by using one of the search techniques discussed in
"Connecting to a node's serial ports" on page 143.. 2. Click the SSH link to connect to the URL. These auto-generated links use the colon (:) as the field-delimiter. The autogenerated SSH link has the following form:
ssh://user-name:console-server-name:port-number@lighthouseip-address
Some web browsers associate the colon character with delimiting the protocol at the beginning of a URI so they don't pass these auto-generated URIs correctly. To work around this, the default delimiter character can be changed. To change this character: 1. Select SETTINGS > SERVICES > Console Gateway

2. 3. Enter a delimited character in the Console Gateway Port Delimiter text-entry
field. The carat, ^, is the most common alternative.

23.04.0

Managing Lighthouse Nodes

149

4. Use the Console Gateway SSH Address drop-down menu to choose an address from which to SSH. The list of available addresses contains the current network interfaces and external network addresses. The value defaults to net1:dhcp if it exists and net1:static otherwise. The additional external addresses can be added to this list using the SETTINGS > SYSTEM> Administration page.
To use the console chooser menu, SSH to the Lighthouse appliance with the username format username:serial. This connects to the Lighthouse and presents a list of nodes that the user can access. Once the user selects a node, they are presented with a list of console ports they have access to. When one is selected, the user is connected to that port. For faster access, there are username format shortcuts that give more specific lists of serial ports, or direct access without a menu.
l username:node_name When a valid node name is specified, a list of console ports that the user can access on that node is shown. If they do not have access to this node, the connection fails.
l username:node_name:port_name When a valid node name and port name are specified, and the user has access to that node and port, the user is connected to this port. If they do not have access to that port, the connection fails.
l username:port_name When a valid port name is specified, the user is connected to first port with that port name found. If the user does not have access to this port, the connection fails.
NOTE: Node names and port names are not case sensitive.

23.04.0

Managing Lighthouse Nodes

150

EXAMPLE CONSOLE GATEWAY SESSION
$ ssh adminuser:serial@lighthouse-name-or-ip-here 1: cm71xx Connect to remote > 1 1: Cisco Console 2: Port 2 Connect to port > 1 router#

SELECTING NODES USING SHELL-BASED TOOLS
There are a number of ways to select nodes, also known as console servers, as targets on which to run a command. These can be used multiple times, or together, to select a range of console servers: Select individually by name, address, Lighthouse VPN address, config index or smart group (as per --list- nodes output):
node-command --node-name BNE-R01-IM4248 node-command --node-address 192.168.0.33 node-command --node-index nodes-1 node-command --smartgroup="model-acm"
To Select all nodes
node-command --all
To running commands on selected nodes Once nodes are selected, the commands to be run for each can be given. These are run on each managed node in parallel. Any command which can be run from a node shell can be run on each managed node.

Note: All commands are run as root.

23.04.0

Managing Lighthouse Nodes

151

For example, to check the version on two specific, configured nodes, selecting one by name and the other by index, run the following command:
node-command --node-name BNE-R01-ACM7004-5 --node-index nodes-2 cat /etc/version
When using non-trivial selection arguments, check which target nodes have been selected on the initial command pass by using the --list-nodes switch rather than the final command.

NODE ORGANIZATION AND FILTERING
To provide clear and customized access to nodes, Lighthouse uses Smart Groups which allow node properties and user-supplied tags, consisting of a name and value, to be compiled into a search expression.
These search expressions can be saved and used to filter the various lists of nodes in the Web UI, for example when selecting a serial port to connect to or to connect to the node's Web UI. They can also be used for define and restrict the nodes that a particular group of users can access.
To help locate managed devices, Lighthouse includes Port Filtering which allows users to search for port labels and port tags on a node. This search can be saved and applied on the MANAGE > MANAGED DEVICES > Console Gateway page.

FILTER NODES
Filters enable you to quickly find a particular node or set of nodes. The filters are: l Free Text Search l Smart Group Filtering, and

23.04.0

Managing Lighthouse Nodes

152

l Port Filtering. You can see how to use these in "Monitor Nodes" on page 115.
CREATING SMART GROUPS
Smart Groups are used within Lighthouse to group related nodes. Smart Groups can also be used to filter visible nodes on pages that display enrolled nodes (such as CONFIGURE > NODE Enrollment > Enrolled Nodes) to make it easier to drill down to a particular console. Smart Groups are dynamic, when more nodes are added to the system, the filters update automatically. A user group can be linked to a particular Smart Group. When a user group is linked to a smart group in this fashion, members of the group inherit rights over all nodes in the smart group based on the group's role. Modifying existing groups for how to set a group's role and linked Smart Group. To create a Smart Group: 1. Navigate to any page which displays the Smart Group search interface, for
example MONITOR > Nodes.

23.04.0

Managing Lighthouse Nodes

153

2. Move to the Smart Group Filtering and select New Smart Group from the displayed list
3. Click the Field to search dropdown to select a node attribute to filter on.

Node attributes include details about the device (Internal VPN Address, MAC Address, Name, Product, SSH Port, Firmware Version, Model, Serial Number, Node ID, Connection Status, Cell Health), and include any Tags that have been configured in the system. For filtering access to devices, tags are the most useful attributes to filter on. When a tag is selected, the Field to search text box contains tag values.
4. Select the Operator to apply to the Value. 5. Select the Value to be matched against. 6. To enter multiple search parameters, click - Add parameters

23.04.0

Managing Lighthouse Nodes

154

7. The AND OR buttons display l Select AND if the filter must match all values. l Select OR if one or the other values must match.
8. Enter the additional details in the Field to search, Operator and Value fields.
Note: Note: Click the - button to remove the additional Search parameters if necessary.
9. Click Apply to see the results of the filter. 10. Click Save As and type in a name for your new Smart Group.
This Smart Group can now be used for filtering nodes for display and for access.

23.04.0

Managing Lighthouse Nodes

155

EDITING A SMART GROUP
To edit a Smart Group: 1. Select CONFIGURE > Edit Smart Groups.

2. Click Delete to delete an existing Smart Group. 3. Click Edit Group button to change a Smart Group's name.

To change the search parameters used by a Smart Group: 1. Navigate to a page that displays Smart Groups for filtering (for example,
CONFIGURE > NODE Enrollment > Enrolled Nodes). 2. Select the required Smart Group to be changed from the Select Smart Group
drop-down menu. 3. Change the Field to search and Operator values as required. 4. Click Save Changes.

23.04.0

Managing Lighthouse Nodes

156

5. Retain the Smart Group Name and click Apply. The changed search parameters overwrite the parameters of the Smart Group.
CREATING PORT FILTERS
Use Port Filters to easily find ports on nodes. The MANAGE > MANAGED DEVICES > Ports page makes it easier to find a particular port. Ports are dynamically updated when more nodes with managed devices are added. Ports can be filtered by multiple parameters using either the AND and OR boolean operators. To create a Port Filter: 1. Select the MANAGE > MANAGED DEVICES > Ports page. 2. On ADVANCED FILTER pane and select Port Filter.

3. Click Field to search to select a node attribute to filter on. l Select either Port Label or Port Tag.
4. If using Port Labels,click Operator to select the operator to apply to the Value.

23.04.0

Managing Lighthouse Nodes

157

5. Enter the Value to be matched against. 6. To enter multiple search parameters, click - Add parameters 7. The AND OR buttons display
l Select AND if the filter must match all values. l Select OR if one or the other values must match. 8. Enter the additional details in the Field to search, Operator and Value fields.
Note: Note: Click the x button to remove the additional Search parameters if necessary.
9. Click Apply to see the results of the filter. 10. Click Save As and enter a name for the filter.
The new Port Filter can now be used for filtering nodes by ports.

23.04.0

Managing Lighthouse Nodes

158

EDITING AN EXISTING PORT FILTER
To edit an existing Port Filter, select CONFIGURE > Edit Port Filters page.
l Click the Delete button to delete an existing Port Filter. l Click the Edit button to change a Port Filter's name.

To change the search parameters for a Port Filter:
1. Navigate to a page that displays the Port Filters, such as MANAGE > MANAGED DEVICES > Ports.

23.04.0

Managing Lighthouse Nodes

159

2. Select the required Port Filter from the Port Filter list. 3. Change the parameters (for example, Operator values) as required. 4. Do not change the name of the Port Filter. 5. Click Save as. 6. Click Apply. The modified Port Filter overwrites the existing Port Filter.
Note: Do not change the name of the Port Filter.

UPGRADE NODES VIA THE UI
When you need to upgrade nodes to the latest firmware, for example, for security fixes, use the Node Upgrade UI to upgrade up to 5000 connected nodes per task. The Node Upgrade UI allows you to upgrade nodes either immediately or at a scheduled time, even outside normal business hours.
The Node Upgrade UI is available in the Web UI under Settings > Services > Node Firmware Upgrade.
Completed jobs with the nodes selected can be duplicated so as to allow easy sequential upgrades. Nodes that failed to upgrade can be re-scheduled.

23.04.0

Managing Lighthouse Nodes

160

Upon opening the Node Firmware Upgrade window there are two tabs accessible, plus access to the upgrade scheduling wizard, these are: l Upgrade Tasks a filtered dashboard where you can view scheduled and
completed tasks and see their status. l File Manager An area that allows upgrade files to be uploaded and a table that
displays previously uploaded files. l Node Firmware Upgrade scheduling wizard This is where you can set up and
schedule firmware upgrades. The wizard is accessed by clicking on the + button in the Upgrade Tasks tab.
Completed jobs with the nodes selected can be duplicated so as to allow easy sequential upgrades. Nodes that failed to upgrade can be re-scheduled.
FIRMWARE FILES
Before you upgrade, you need access to firmware files.
UPLOAD A FIRMWARE FILE
The Node Upgrade UI is available in the Web UI under Settings > Services > Node Firmware Upgrade Use the Upload tool on the File Manager tab to upload one file at a time.
Note: Only one file may be uploaded at a time using the upload tool. If multiple files are selected and placed in the drag and drop field, only the last file that was selected will be uploaded.

23.04.0

Managing Lighthouse Nodes

161

1. Select the `File Manager' tab in the Node Firmware Upgrade UI section. 2. Either select `upload a file' to open an explorer view, then select the file. Or 3. Drag and drop the file into the upload area.
In-progress uploads can be cancelled by clicking the Close button (X). The file upload will continue even if you click elsewhere in the Lighthouse UI, however, the upload will be cancelled if you close the website or if the HTTPS connection to Lighthouse is closed.

23.04.0

Managing Lighthouse Nodes

162

DELETE A FIRMWARE FILE
The Node Upgrade UI is available in the Web UI under Settings > Services > Node Firmware Upgrade Use the Delete tool on the File Manager tab to delete one file at a time. To delete a firmware file that is no longer needed: 1. Select the File Manager tab on the Node Firmware Upgrade UI page. 2. Click the delete button ( ) next to the firmware file you wish to delete.
Note: If the selected firmware file is required by an ongoing or upcoming firmware upgrade task, an error message displays and the file is not deleted.
NODE UPGRADE TASKS
To upgrade a node you will need to set up a task.

23.04.0

Managing Lighthouse Nodes

163

CREATE AN UPGRADE TASK
The Node Upgrade UI is available in the Web UI under Settings > Services > Node Firmware Upgrade Use the Upgrade tasks tab to l Upgrade a node l Schedule a node upgrade l Upload a new firmware file To upgrade a node use the task information table: 1. Click the Schedule an Upgrade button (+) above the task information table to
schedule an upgrade (or start one immediately). 2. The Node Firmware Upgrade wizard displays. Enter a name/title for the
upgrade task.

23.04.0

Managing Lighthouse Nodes

164

3. Click the Select Firmware button. The Select Firmware list displays.

4. Select the firmware upgrade or upload new firmware for the upgrade task. Click Select Firmware button.

23.04.0

Managing Lighthouse Nodes

165

5. Select the nodes to be upgraded. Select Next - Schedule Upgrade.

Note: Compatible nodes that have already been scheduled for an upgrade cannot be selected, these are visible in the list but appear greyed-out. Nodes that are not compatible with the firmware file will not be listed.
6. Select the Start time as either Immediately after creation for immediate start, or, Set time. For Set Time , enter the Scheduled time Date and Time.

Note: The scheduled time is always in UTC.

23.04.0

Managing Lighthouse Nodes

166

7. If Upgrade in Failover is selected, it is selected either in bulk, by dropdown selection (a), or, individually by a toggle switch beside each table row (b):
Note: Selecting this option may result in considerable cell charges in the event of a failover. 8. Click Next Review and Confirm to go to the review screen. Check the schedule details are correct. To change schedule details, click Back Schedule Upgrade, all data local data will be preserved while you change parameters on previous screens. 9. Select Confirm, and type Yes at the prompt, then click Confirm to create the task.

23.04.0

Managing Lighthouse Nodes

167

CANCEL AN UPGRADE TASK
You can cancel a task that has not yet completed the upgrade. To cancel an upgrade task" 1. Select Settings > Services > Node Firmware Upgrade 2. In the task list, select the task name you wish you cancel, the Task Details screen
displays. 3. Click the X button (top-right) to cancel the task.
Note: You cannot cancel upgrade tasks that have already been completed. Limitations: l Do not cancel an upgrade job just as it is about to begin, for example, 10 seconds
before or after the start time. l If an upgrade is cancelled while in progress, only nodes that have not yet been
upgraded will be cancelled.

23.04.0

Managing Lighthouse Nodes

168

COPY A SCHEDULED TASK
You can copy a scheduled task in order to create a new upgrade task. The new upgrade task will use the nodes that were selected for the original task you are copying, for example to add or remove nodes from the list. You can also select different firmware or use the same firmware for the list of nodes.
Note: For a task to be copied, the task must have already run or been cancelled, and display an Upgrade Status of Completed.
1. Navigate to the Node Firmware Upgrade Home screen. The Node Upgrade UI is available in the Web UI under Settings > Services > Node Firmware Upgrade

2. Select the task you wish you copy, by clicking the task name in the task table

23.04.0

Managing Lighthouse Nodes

169

3. Click the Copy button to copy the task

4. A new task is created with the same nodes.

23.04.0

Managing Lighthouse Nodes

170

DELETE AN UPGRADE TASK
Upgrades cannot be permanently deleted as they can offer a valuable insight into the health of the nodes when problem-solving and provide the version path that they have traversed over their lifetime.
If the number of jobs is becoming unmanageable, or jobs need to be deleted for security measures, the support team will be able to advise on how to remove/clear them.

23.04.0

Managing Lighthouse Nodes

171

RETRY AN UPGRADE TASK
If an upgrade task fails, you can retry the node upgrades, provided the firmware file is still available.
1. Navigate to the Node Firmware Upgrade Home screen. The Node Upgrade UI is available in the Web UI under Settings > Services > Node Firmware Upgrade
2. Select the task you wish you retry, by clicking the task name in the task table. You can filter the task list by using the Completed with Errors filter.

3. In the task detail screen, click the Repeat for failed upgrades button.

Note: If the relative Firmware file has been deleted, the Repeat for failed upgrades button is not displayed.

23.04.0

Managing Lighthouse Nodes

172

4. The Node Firmware Upgrade page displays. See "Create an upgrade task" on page 164.
NODE UPGRADE RUNTIME BEHAVIOUR
The following describes the behavior of the Node Upgrade tool while performing routine upgrade tasks.

23.04.0

Managing Lighthouse Nodes

173

PROMOTING A SECONDARY INSTANCE TO PRIMARY
l All scheduled upgrades are cancelled when a secondary node is promoted to be the new primary node.
l Firmware files are not replicated among the multiple instance cluster and must be re- uploaded to the new primary after promotion.

23.04.0

Managing Lighthouse Nodes

174

DOWNGRADING AND SKIPPING VERSIONS
Lighthouse does not allow downgrading of nodes, nor does it allow upgrading to an identical version. The node upgrade will skip nodes that are at the upgrade version or later, for example, if upgrading from version 21.Q3 to 21.Q4, it will ignore any nodes that are already at 21.Q4 or 22.Q1.
Skipping versions
If a node is scheduled to be upgraded from 21.Q3 directly to 22.Q1 (skipping 21.Q4), it will upgrade the node even if it has been manually upgraded to 21.Q4 before the scheduled upgrade starts.
Note: Lighthouse does not check or validate the version jumps for nodes, so there is a risk that the upgrade could fail if major versions are being skipped. Skipping versions is not recommended or supported, however, it is not disallowed.

23.04.0

Managing Lighthouse Nodes

175

TIME ZONES
Node upgrades can only be initiated or scheduled by an operator with administrator credentials while logged in at the primary lighthouse. The scheduling of the node upgrade is based on the time zone of the primary lighthouse.
If the time zone of the primary lighthouse is changed before a scheduled upgrade starts, the schedule time will be based upon the new time zone. This may result in jobs not running at all, being skipped, ignored, or otherwise running at unpredictable times.
Note: It is recommended that you avoid changing the system time of lighthouse, or its time zone, while jobs are scheduled.

23.04.0

Managing Lighthouse Nodes

176

OFFLINE NODES
If a node is offline or otherwise unreachable at the time of upgrade, the node will be skipped.
If the node is offline there is a one minute buffer before the scheduled upgrade is skipped and Lighthouse will report the node with a failed to upgrade status.

23.04.0

Managing Lighthouse Nodes

177

NODE CONNECTION INTERRUPTED
If the connection to the node is interrupted during the upgrade, the upgrade may be cancelled and will fail unless the upgrade was in the final stages and had no need for further interaction with Lighthouse. In this scenario Lighthouse may still report the node upgrade as failed if it was unable to confirm that the upgrade succeeded due to the node being disconnected during the validation period.
Failure to upgrade one node does not affect other nodes in the upgrade job.

23.04.0

Managing Lighthouse Nodes

178

UNENROLLING NODES AT UPGRADE
Unenrolling nodes as they are being upgraded is not supported as this could result in unexpected behavior.

23.04.0

Managing Lighthouse Nodes

179

LIGHTHOUSE AVAILABILITY AND STABILITY
Lighthouse must be online and fully booted (preferably for at least a few minutes) before the upgrade starts. It is good practice to have Lighthouse online for a few hours before a node upgrade. This ensures that all the nodes that will be upgraded have re-established their connection and allows time to troubleshoot any issues. Do not attempt to change major Lighthouse settings, especially those involving the network or timezone, when an upgrade is underway or imminent. Do not conduct multiple major operations on nodes simultaneously, for example, do not apply templates to the node while it is being upgraded. Do not login to a node and change settings moments before an upgrade occurs.
Note: If Lighthouse is offline when a scheduled upgrade is due to start, the upgrade will not be run.
MANAGE PORTS
Lighthouse allows you to manage all ports connected to nodes. MANAGE > MANAGED DEVICES > Ports displays the status and number of all the ports on Lighthouse, which you have permissions to view/edit. 1. Select MANAGE > MANAGED DEVICES > Ports. The Ports page displays the
Labels, Parent Node and Tags of the connected ports which the user has permissions to view/edit.

23.04.0

Managing Lighthouse Nodes

180

2. BASIC FILTER,and ADVANCED FILTER allow you to sort the display of ports, by Free Text, Smart Group or Port Filter.
3. The BASIC FILTER Free Text Search allows you to search by the name of a port label or port tag.
The Port Filter drop down menu allows you to fine tune your search by either selecting an existing Port Filter or to creating a New Port Filter.

4. The Tag icon

allows you to create, assign or remove a new Port Tag. You

can use port tags to control user access to ports.

You can also access the Web Terminal and SSH links for individual ports via the icons to the right of each row, if you have the requisite permissions.

Organizations of complex installations with many nodes can also manage ports programmatically via the CLI.

"Command line tools"

23.04.0

Managing Lighthouse Nodes

181

FILTERING PAGES DISPLAYING PORTS
If you want to quickly find a particular port or set of ports, you can drill down to specific ports by using the BASIC and ADVANCED filters. There are three ways to filter search results: l Free Text Search l Smart Group, and l Port Filters. The filters can be used independently from each other or in combination. 1. Select MANAGE > MANAGED DEVICES > Ports. The Ports page displays the
Labels, Parent Node and Tags of the connected ports.

2. Use the BASIC FILTER and ADVANCED FILTER dropdowns to sort the display of ports, by Free Text, Smart Group or Port Filter.

FILTERING USING THE FREE TEXT SEARCH FIELD
The Free Text Search input field allows near real-time filtering of ports using the following criteria:

23.04.0

Managing Lighthouse Nodes

182

l Port Label l Port Tag
Enter your search term in the Free Text Search field and click Enter.
The Free Text Search field treats multiple search terms separated by the space character as being combined with the logical AND operator, returning results only if all terms are present in the item.
For example, the search phrase production switch returns only ports that contain both production AND switch anywhere in searchable fields.
To search for a multi-word term, enclose the search term in double quote characters. For example, "production switch" will return results only if the entire search term is matched in the item.

23.04.0

Managing Lighthouse Nodes

183

FILTERING USING THE SMART GROUP FILTERING DROP-DOWN MENU
You can search for groups of ports by using the Select Smart Group field. Enter the search criteria in Select Smart Group and a menu displays the ports that belong to the selected group, provided you have the requisite permissions. See "Creating Smart Groups" on page 153 for how to create such groups. After a particular Smart Group has been selected, further filtering options become available under Fields to search: To add more filtering options: 1. Click Field to search. 2. Select a field and enter a value in the text box. 3. Select an Operator from the drop-down box on the right. 4. Click the + Add Parameters button. Select a parameter. 5. Click Apply.
The list of ports that meet the specified criteria display.

23.04.0

Managing Lighthouse Nodes

184

FILTERING USING THE PORT FILTER DROP-DOWN MENU
You can search for groups of ports by using the Port Filter field. Enter the search criteria in Port Filter and the page displays the ports that belong to the selected group. To add a new Port Filter: 1. Click Field . 2. Select a field option such as Port Label or Port Tag and enter a value in the text
box. 3. Select the next Field to Search option such as Port Tag and enter a value in the
text box. 4. For Port Labels you can select an Operator from the drop-down box on the right. 5. If you wish to narrow the search, select +Add Parameters. Select the AND or OR
button to specify the requisite boolean value. 6. You can repeat from step 4 to add more parameters. 7. Click Apply Filter. 8. Click Save Changes. You can also select to Clear.
CREATE A NEW PORT TAG
1. Select CONFIGURE > Manage Port Tags. The Manage Port Tags page displays the Tags and the number of Assigned Ports, if any

23.04.0

Managing Lighthouse Nodes

185

Select Create New Tag icon on the upper right. The ADD NEW TAG dialog displays.

1. Enter the port tag name in the field and click Add Tag. 2. You can also enter multiple port tag names separated by commas. 3. The new tags display on the Manage Port Tags page. 4. Click the Assign to Port link to assign the tag to a specific port. The Ports page
displays. 5. After the tag is assigned, the Manage Port Tags page displays the number of
ports that a tag is assigned to in the Assigned Ports column. You can click on the number in the Assigned ports column to view a filtered version of the PORTS page.

23.04.0

Managing Lighthouse Nodes

186

You can also manage tags via the port-tags command in the CLI. "Command line tools"
EDIT A PORT TAG
Select CONFIGURE > Manage Port Tags. The Manage Port Tags page displays the Tags.
Select the tag to edit. The EDIT <TAGNAME> dialog displays.

23.04.0

Managing Lighthouse Nodes

187

1. Edit the port tag name in the field and click Update Tag. 2. The edited tag name displays on the Manage Port Tags page. You can also manage tags via the port-tags command in the CLI. "Command line tools"
DELETE A PORT TAG
Select CONFIGURE > Manage Port Tags. The Manage Port Tags page displays the Tags.

Select the tag to delete. The EDIT <TAGNAME> dialog displays.

23.04.0

Managing Lighthouse Nodes

188

1. Click Delete Tag. 2. A confirmation message displays. Click Confirm to delete the tag. You can also manage tags via the port-tags command in the CLI. "Command line tools"
ASSIGN A PORT TAG
1. Select MANAGE > MANAGED DEVICES > PORTS. The PORTS page displays .

23.04.0

Managing Lighthouse Nodes

189

2. You can select one or more ports. Click the tag icon . 3. The MANAGE PORT TAGS dialog displays.
4. To assign port tags to the selected port(s), click the Select existing tag button. A dropdown list of existing tags displays. Select the required tags.
5. Click Confirm on the Confirm Changes message box. 6. Select the required tag(s) and click Update tags 7. The added tags display on the PORTS page

8. The number of assigned ports also display on the Manage Port Tags page. Note: You can also manage tags via the port-tags command in the CLI.

23.04.0

Managing Lighthouse Nodes

190

"Command line tools"

23.04.0

Managing Lighthouse Nodes

191

SUBSCRIBING TO LIGHTHOUSE
Lighthouse has a flexible, simplified subscription model that allows you to add extended functionality if required. The Systems and Subscriptions option on the main menu provides information on your subscriptions including the type of subscriptions, the validity and the number of days before expiry.

Click View Details. The Subscriptions page displays.

23.04.0

Subscribing to Lighthouse

192

You can also click Show Details for more information about activation.

23.04.0

Subscribing to Lighthouse

193

The subscriptions available are:
l The Enterprise Edition Subscription provides base functionality to enroll, monitor, and manage nodes.
l The Enterprise Automation Edition provides base functionality plus the advanced NetOps features - Automation Gateway and Secure Provisioning.
You can apply the extra functionality to selected nodes only, giving you the flexibility to use different subscriptions for different nodes.

23.04.0

Subscribing to Lighthouse

194

Subscription licensing is clearly displayed on the UI. Users can see the active subscriptions, the node count supported, assigned nodes, and time left on the subscription. For more information on subscription tiers, see "Enrollment Bundles" on page 129.
ADDING A NEW SUBSCRIPTION TO LIGHTHOUSE
Lighthouse has a flexible, simplified subscription model that allows you to add extended functionality if required.
Note: Contact sales@opengear.com with a request for the type of subscription, including the number of nodes you wish to apply the subscription to. You will receive an encrypted .zip file named subscription.zip.

23.04.0

Subscribing to Lighthouse

195

TO ADD A SUBSCRIPTION
1. Select Systems and Subscriptions. A summary displays, click View Details.The Subscriptions page displays.
2. Click Add Subscription. 3. The New Subscription dialog displays. Click Choose file and select the required
zip file and click Apply.

23.04.0

Subscribing to Lighthouse

196

4. The success message displays, and the subscription displays.

ASSIGNING SUBSCRIPTIONS TO NODES
Lighthouse has a flexible, simplified subscription model that allows users to mix and match functionality where required. Users can reassign nodes to different subscriptions in order to optimize Automation Edition features on their network. For example, if the user:
l Previously had two license tiers, but only paid to renew one license tier l Purchased an AE license for the first time, and wants the extra functionality on
some of their nodes l Wants to swap which nodes have access to the extra functionality available in an
AE license

23.04.0

Subscribing to Lighthouse

197

VIEW SUBSCRIPTIONS IN THE LIGHTHOUSE UI
To see subscriptions: 1. Select SETTINGS > Systems > Subscriptions. 2. The Subscriptions page displays. Select Subscription Assignment.
The Subscriptions page displays details of the subscriptions and allows you to search using smart group filters, or free text searches. The page also allows you to update, replace or add new subscriptions

23.04.0

Subscribing to Lighthouse

198

TO ASSIGN NODES TO SUBSCRIPTIONS
Select SETTINGS > System > Subscriptions > Subscription Assignments. The Subscriptions Assignments page displays details of the nodes including: l The Node name l The Subscription Type l Current NetOps module deployment to assigned nodes l Date of Assignment

23.04.0

Subscribing to Lighthouse

199

TO ASSIGN A SUBSCRIPTION

1. Select SETTINGS > System > Subscriptions > Subscription Assignment

2. Display the required nodes using the Filter pane, either by using the Filters or Free text options.

3. To assign a subscription to a node click the Subscription dialog displays.

Assign button. The Assign

4. Select the required subscription from the leftmost panel using the button.
5. Click Confirm Assignment

Assign

23.04.0

Subscribing to Lighthouse

200

TO CHANGE A NODE'S SUBSCRIPTION

1. Select SETTINGS > Systems > Subscriptions > Subscription Assignment

2. Display the required nodes using the Filter pane, either by using the Labels or Free text options.

3. To change subscription on a node click the Assign Subscription dialog displays.

Assign button on the row. The

4. Select the required subscription from the right panel.

5. Click Confirm Assignment to change the node's subscription. A message box displays indicating the effect of changing the subscription.

Note: Another way of removing a node from a subscription is to unenrol the node. The subscription will then become available to be assigned to another node.

23.04.0

Subscribing to Lighthouse

201

CONFIGURING LIGHTHOUSE
Templates are a centralized way of changing the configuration for enrolled Opengear console server nodes by pushing pre-defined configuration templates to selected nodes. Lighthouse supports the creation and execution of Users and Groups, Authentication and Script templates.

CREATE TEMPLATES
Administrators can access CONFIGURE > CONFIGURATION TEMPLATING > Users and Groups Templates to create, edit, and delete users and groups templates. Each template must contain at least one group. Each template contains a list of user-defined groups and/or individual users. Each group has a defined role which determines what privileges group members have. User roles are defined by the groups they are a member of. The available group roles are: l Node Administrator -- maps to the administrator role on the nodes. l Node User -- maps to the ports user role and the pmshell role on the nodes.
Ports access can be restricted if required.

CREATING NEW USER AND GROUP TEMPLATES
Administrators can access CONFIGURE > CONFIGURATION TEMPLATING > Users and Groups Templates to create, edit, and delete users and groups templates. Each template must contain at least one group.
Each template contains a list of user-defined groups and/or individual users. Each group has a defined role which determines what privileges group members have. User roles are defined by the groups they are a member of.

23.04.0

Configuring Lighthouse

202

The available group roles are: l Node Administrator -- maps to the administrator role on the nodes. l Node User -- maps to the ports user role and the pmshell role on the nodes.
Ports access can be restricted if required. To create a new users and groups template: 1. Select CONFIGURE > CONFIGURATION TEMPLATING > Users and Groups
Templates. 2. Click the + button. The New Users and Groups Template page displays.

3. Enter a Name and Description for a template in the Template Details section. 4. Click the + Add a group button in the Set Group List section to add a new
group. The Group Details dialog loads.

23.04.0

Configuring Lighthouse

203

5. Enter a Group Name, a Description, and select a Role for the group. 6. If Node User role is selected, the Restrict accessible Serial Ports checkbox and Serial Ports range appear. 7. Use the checkbox to restrict access and specify as port or range of ports in the Serial Ports range text box. 8. Click Apply. 9. Click the + Add a user button in the Set User List section to add new users. The User Details dialog loads.

10. Enter a Username, a Description, and a Password for the user. Type the password again in the Confirm Password text box.
11. Optionally, click checkboxes next to the groups this user should belong to. Only groups from this template are available.
12. Click Apply.

23.04.0

Configuring Lighthouse

204

13. Continue adding new groups and users until finished. 14. Click Save Template.
Note: When a users and groups template is pushed to a node, all custom groups on that node are replaced by groups defined in the template. If no users are in the new template, existing users will remain on the node. To push users, the selected nodes need to be running firmware version 4.3.0 or later.
MODIFYING EXISTING USERS AND GROUPS TEMPLATES
Use the Edit Users and Groups Template dialog to modify a template's Description, Group List, and User List. To modify a template: 1. Select CONFIGURE > CONFIGURATION TEMPLATING > Users and Groups
Templates
.

23.04.0

Configuring Lighthouse

205

2. Click Edit button next to the template to be modified. The Edit Users and Groups Template dialog displays

. 3. Make changes to the template's details, group list, or Individual user list as
required. 4. Click the x button under Actions next to any groups or users which need to be
removed. 5. Click Save Template.
DELETING USERS OR GROUPS FROM A TEMPLATE
To delete users or groups from a template: 1. Select CONFIGURE > CONFIGURATION TEMPLATING > Users and Groups
Templates. 2. Click the Edit button in the Actions section of the template. 3. Click the x button under Actions next to any groups or users which need to be
removed. 4. Click Save Template to save the changes.

23.04.0

Configuring Lighthouse

206

DELETING USERS AND GROUPS TEMPLATES
To delete a template: 1. Select CONFIGURE > CONFIGURATION TEMPLATING > Users and Groups
Templates. 2. Click the Delete button next to the template to be removed. The Confirmation
dialog displays. 3. Click Yes in the Confirmation dialog. The template is deleted.
CREATE AUTHENTICATION TEMPLATES
Only users assigned to the Lighthouse Administrator role can access CONFIGURE > CONFIGURATION TEMPLATING > Authentication Templates and create authentication templates.
CREATING NEW AUTHENTICATION TEMPLATES
Only users assigned to the Lighthouse Administrator role can access CONFIGURE > CONFIGURATION TEMPLATING > Authentication Templates and create authentication templates. The supported modes are Local, Radius, TACACS+, and LDAP. For example, if an authentication template is configured to use RADIUS as an authentication source, that corresponds to RADIUSDownLocal with Use Remote Groups ticked on the downstream node. To create a new authentication template:

23.04.0

Configuring Lighthouse

207

1. Select CONFIGURE > CONFIGURATION TEMPLATING > Authentication Templates.
2. Click the + button. The New Authentication Template page loads.

3. Enter a Name and Description for a template in the Template Details section. 4. Select a desired Scheme or click Pre-populate to pre-populate a template with
the current Lighthouse remote authentication configuration. 5. Enter or update authentication settings if required. See 8.10 Configuring AAA for
an example. 6. Click Save Template.
Note: When an authentication template is pushed to a node, the authentication settings at that node are replaced by the those defined in the authentication template.
Note: The authentication templates do not support the full list of settings that the Opengear console servers support. However, templates can be applied, and then additional settings configured manually.

23.04.0

Configuring Lighthouse

208

MODIFYING EXISTING AUTHENTICATION TEMPLATES
The Edit Authentication Template dialog allows the template's Description and Authentication Settings to be set and changed. To modify an existing authentication template: 1. Select CONFIGURE > CONFIGURATION TEMPLATING > Authentication
Templates.
2. Click Edit next to the template to be modified. The Edit Authentication Template dialog displays.

23.04.0

Configuring Lighthouse

209

3. Make required changes. 4. Click Save Template.

DELETING AUTHENTICATION TEMPLATES
To delete an authentication template: 1. Select CONFIGURE > CONFIGURATION TEMPLATING > Authentication
Templates. 2. Click Delete next to the template to be removed. The Confirmation dialog
displays. 3. Click Yes in the Confirmation dialog. The authentication template is deleted.

CREATE SCRIPT TEMPLATES
Script Templates allow the user to upload arbitrary shell scripts to be run on a node. For example, a script may set additional configuration settings not available in other templates or store additional files onto the node such as certificates. The uploaded script must have: l a .sh extension and l can't be more than 1MB in size. Other than those, there are no other restrictions on the script file to be uploaded. Once saved, the template stores the size and SHA1 checksum of the script. This can be used to verify the script contents of the template once saved. To apply script templates, the selected nodes need to be running firmware version 4.1.1 or later.

23.04.0

Configuring Lighthouse

210

CREATING NEW SCRIPT TEMPLATES
Script Templates allow the user to upload arbitrary shell scripts to be run on a node. A script may set additional configuration settings not available in other templates or store additional files onto the node such as certificates, for example. The uploaded script must have a .sh extension and can't be more than 1MB in size. Other than those, there are no other restrictions on the script file to be uploaded. Once saved, the template stores the size and SHA1 checksum of the script. This can be used to verify the script contents of the template once saved. To apply script templates, the selected nodes need to be running firmware version 4.1.1 or later.
Lighthouse Administrators can create script templates via CONFIGURE > CONFIGURATION TEMPLATING > Script Templates
To create a new script template:
1. Select CONFIGURE > CONFIGURATION TEMPLATING > Script Templates. 2. Click the + button. The New Script Template dialog loads.

23.04.0

Configuring Lighthouse

211

3. Enter a Name and Description for a template in the Template Details section. 4. To select a script to upload, click Choose file. 5. Click Save Template. Script checksum and Script size are displayed after the template with uploaded script is saved.
MODIFYING EXISTING SCRIPT TEMPLATES
The Edit Script Template dialog allows the template's Description, Script timeout, and Script File to be uploaded. To modify an existing script template: 1. Select CONFIGURE > CONFIGURATION TEMPLATING > Script Templates.
2. Click Edit next to the template to be modified. The Edit Script Template dialog displays.

23.04.0

Configuring Lighthouse

212

3. Make the required changes. 4. Click Save Template.

DELETING SCRIPT TEMPLATES
To delete a script template completely: 1. Select CONFIGURE > CONFIGURATION TEMPLATING > Script Templates. 2. Click Delete next to the template to be removed. The Confirmation dialog
displays. 3. Click Yes in the Confirmation dialog. The script template is deleted.

USE TEMPLATES
Users with Lighthouse Administrator privileges (that is, users with the Lighthouse Administrator role or users who are members of groups with the Lighthouse Administrator role) can access CONFIGURE > CONFIGURATION TEMPLATING > Apply Templates and execute templates affecting any node.
Users with Node Administrator privileges (i.e. users with the Node Administrator role or users who are members of groups with the Node Administrator role) can access CONFIGURE > CONFIGURATION TEMPLATING > Apply Templates and execute templates affecting nodes in Smart Groups linked to their role.

APPLY TEMPLATES

Users with Node Administrator privileges (that is, users with the Node Administrator role or users who are members of groups with the Node Administrator role) can access CONFIGURE > CONFIGURATION TEMPLATING > Apply Templates and

23.04.0

Configuring Lighthouse

213

execute templates affecting nodes in Smart Groups linked to their role. Apply Templates consists of four stages, each one a step in the overall wizard. The steps are: 1. Select Template. 2. Select Nodes. 3. Preflight. This test run simulates what happens if the template is pushed to the
selected nodes. 4. Execution. To apply a template: 1. Select CONFIGURE > CONFIGURATION TEMPLATING > Apply Templates. 2. Select a template from the existing template tree. Template Details populates
with details from the selected template.

3. Click Next -- Select Nodes. The Select Nodes stage loads. 4. Select nodes from the list of enrolled nodes. Smart Group Filtering and Free
Text Search Filtering can be used to narrow down the results.

23.04.0

Configuring Lighthouse

214

Note: Third-party nodes are not supported for template execution.
5. Scroll to the bottom of the page and click Next -- Preflight. The Preflight stage loads. To retrieve updated Preflight results and details, click the Update icon above the table.
After all nodes finish preflight, a success message displays and the Next -- Push Configuration button becomes active. 6. Select desired nodes for template execution and click Next -- Push Configuration. The Configuration Status stage loads. To retrieve Push results and details, click the Update icon above the table.
After all nodes finish the template push, a success message displays.
MANUALLY ACTIVATE NETOPS MODULES VIA TEMPLATE
Lighthouse Administrators can manually apply the Secure Provisioning, Automation Gateway, or IP Access to the suitable Opengear Console Server node.

23.04.0

Configuring Lighthouse

215

1. Select CONFIGURE > CONFIGURATION TEMPLATING > Apply Templates 2. Click Secure Provisioning or IP Access or Automation Gateway under
NetOps Module Activation.

3. Click Next Select Nodes 4. Choose the desired NetOps Console Server nodes by clicking the check boxes
next to them. Note: Only applicable Console Servers for the module display during this node selection step.
5. Click Next Preflight. To ensure the preflight check has succeeded click the Update icon above the table.
6. When preflight is complete, click Next - Push Configuration.

23.04.0

Configuring Lighthouse

216

CONFIGURATION & TECHNICAL SUPPORT REPORTS
Lighthouse can generate a technical support report that includes Lighthouse configuration information and the current system log for the Lighthouse VM. The support technician may ask for this report if you contact Opengear Technical Support.
GENERATE A SUPPORT REPORT VIA THE LIGHTHOUSE INTERFACE
To generate a complete configuration and status report regarding a given Lighthouse VM: 1. Select Help > Technical Support Report Lighthouse generates this support report on demand and the report includes the current system log. This process can take several minutes. 2. Click Download support report.
This downloads a PKZip archive to the local system. The archive's filename is structured as follows: support-[host-name]-[iso-8601-order-date-and-time-stamp].zip It contains two files: l system.txt -- the configuration information also presented in the Technical Support Report window. l messages -- the current Lighthouse VM system log.

23.04.0

Configuring Lighthouse

217

The two files are also presented in the Support Report text box below the Download support report link. Because the report includes the current system log, this is a long but scrollable presentation and is searchable using the web browser's built-in search function.
GENERATE A SUPPORT REPORT VIA THE LOCAL TERMINAL
To generate a complete configuration and status report regarding a given Lighthouse VM: 1. Select MANAGE > LIGHTHOUSE > Local Terminal. 2. At the [hostname] login: prompt, enter an administrator username and press
Return. 3. At the password: prompt, enter the administrator's password and press Return. 4. At the bash shell prompt, enter
support-report -z > /tmp/support.zip and press Return The -z switch generates the same combined file produced by the Download support report link noted in the Lighthouse UI-specific procedure.
Note: In the example above, the redirect saves the generated PKZip file to /tmp/support.zip. However, be aware that the /tmp directory is deleted during a reboot, so the file might be saved to a different location.
Here are two options for copying the file from Lighthouse: l Use SCP from a Mac or Windows client. As scp only requires ssh access, no
additional configuration is required on Lighthouse for this to work.

23.04.0

Configuring Lighthouse

218

$ scp root@192.168.0.2:/tmp/support.zip . root@192.168.0.2's password: support.zip 100% 321 604.0KB/s 00:00
For Windows users, WinSCP on Win10 also works. l Use the FTP client on Lighthouse to copy the file to an FTP server. Passive mode
must be used for this to work. Example:
root@LH5-UK-Lab:/tmp# ftp ftp> open 192.168.0.216 Connected to 192.168.0.216. 220 im7200-demo-uk FTP server (GNU inetutils 1.4.1) ready. Name (192.168.0.216:root): fred 331 Password required for fred. Password: 230- *** Opengear UK Demo IM7216 *** 230 User fred logged in. Remote system type is UNIX. Using binary mode to transfer files. ftp> passive Passive mode on. ftp> bin 200 Type set to I. ftp> put support.zip 227 Entering Passive Mode (192,168,0,216,208,166) 150 Opening BINARY mode data connection for 'support.zip'. 226 Transfer complete. 4132664 bytes sent in 0.128 seconds (32262492 bytes/s) ftp> quit 221 Goodbye.

23.04.0

Configuring Lighthouse

219

MANAGING LIGHTHOUSE USERS
Lighthouse supports locally defined users, and remote users who are authenticated and authorized by Authentication Authorization Accounting (AAA) systems such as LDAP, Radius and TACACs+, Role Description Users must be members of one or more groups. Each group has a role assigned to it which controls the level of access that group members have to the system. These roles are:

Role

Description

Lighthouse Administrator

The Lighthouse Administrator role is assigned to groups whose members need to manage and maintain the Lighthouse appliance. Members have access to all data on the Lighthouse system

Node Administrator

The Node Administrator role is
assigned to groups that need to man-
age and maintain a set of Nodes. Each
group with the Node Administrator role must have an associated Smart Group which is evaluated to define the
set of nodes that the group members
have access to.

Node User

The Node User role is assigned to
groups that need to access a set of
nodes. Each group with the Node User role must have an associated Smart Group which is evaluated to define the
set of nodes that the group members
have access to. Optionally, access to
the managed devices can be limited

23.04.0

Managing Lighthouse Users

220

by associating the saved Managed Device Filter with the Node User role.

Group membership can either be defined locally for local users or defined on the AAA server. Groups that are assigned by the AAA servers must still exist locally.

WORK WITH GROUPS
User groups are used to organize user accounts and their associated privileges. A user group is associated with a set of nodes, its managed devices and ports, and users who are members of the group will have access to those devices through Lighthouse.
For example, administrators can configure port access, and ensure that devices are only accessible to users with the appropriate permissions.
A group may also be associated with one or more roles, which provide permissions to access operational features in Lighthouse.
A user may be a member of multiple groups.

CREATING NEW GROUPS AND ROLES
User groups and roles allow you to control access to nodes, managed devices and ports by creating filters that specify permissions.

CREATE A NEW GROUP

1. Select SETTINGS > USER MANAGEMENT > Groups and Roles. Select the User Groups tab.
2. Click + Add User Group. The New Group page opens.

23.04.0

Managing Lighthouse Users

221

3. Click Enabled to enable group. 4. Enter a Group Name and Group Description.
Note:Group Name is case sensitive. It can contain numbers and some alphanumeric characters. When using remote authentication, characters from a user's remote groups that are not allowed on Lighthouse are converted to underscores during authentication. Local groups can be created that take that into account, allowing the authentication to continue. 5. If desired, you can select a Linked Port Filter and Linked Smart Group to associate with this group. The Linked Port Filter can be used to restrict groups and users to only view ports that are explicitly tagged for their use. 6. The CLI Permissions section displays Command Line Interface(CLI) permissions based on the roles you have assigned to this group. To change the permissions, you can edit or add new roles with the desired CLI Permissions. See "Create a new Role" on page 227. 7. Add one or more roles by clicking Add Role and checking the desired roles. Each role has specific operation permissions associated with it and CLI (Command Line Interface) access levels for console shell, shell, and PM shell. Click view details to see the information for each group.
8. You can also control the new group's permissions independently of the roles you add to your group. Scroll to the bottom of the page to specify Full Access, Read Only, or Deny. Click to the right of each Operation row to see all options.
Note: See Available Operations Permissions for a list of all options.
9. Click Save Group.

23.04.0

Managing Lighthouse Users

222

AVAILABLE ROLES:
l Lighthouse Administrator: Members of groups with this role have Full access to all nodes and managed devices.
l NodeAdmin: Has no shell access. Has Read Only access to Netops Modules, all Nodes & Configuration Operations, Cell Health, Smart Groups, Tags, and Jobs.
l NodeUser: Has PM Shell access. Has Read Only access to Nodes & Devices (Base) and Tags.
l Lighthouse Reporter: Has no shell access. Has Read Only access to all Operations.
You can also create a custom role that allows you to modify CLI Permissions and Operations Permissions by clicking"Create a new Role" on page 227 on the New Group page. A new role can also be based on an existing role with the Use as template link on the upper right of a role's detail page.
AVAILABLE OPERATIONS PERMISSIONS:
l Logging Port Logging Manage port logging settings. Syslog Manage system syslog settings.
l Netops Netops Modules

23.04.0

Managing Lighthouse Users

223

l Nodes & Configuration
Nodes & Devices (Base) Access to dashboard, nodes, managed devices, node Enrollment, console gateway, and Node web UI. Nodes & Devices (Advanced) Access to jobs, pending nodes, smart groups, and managed device filters.
Nodes Firmware Management Template Push Manage templates and push templates to nodes.
l Service Settings LHVPN Cell Health Console Gateway Date & Time HTTPS Netops Install Netops modules and manage local Netops repositories. Node Backup Session Settings SNMP SSH Syslog
l Smartgroups & Tags Bundles Manage and use bundles. Smart Groups Manage and use smart groups. Tags Manage and use tags.
l System Admin & Licensing Manage access settings for Lighthouse and license settings. Backup & Restore Jobs Multi-instance Manage multi-instance settings and control state of instances.

23.04.0

Managing Lighthouse Users

224

Network Interfaces Manage network interface settings. System Upgrade & Reset l Users & Permissions Authentication Manage authentication settings including methods, policies, and restrictions. Groups & Roles Create and edit groups and roles. May not assign them to users. Users View, manage, create, and delete users.
Note: When a new group is given the Lighthouse Administrator role, members of the group have access to the sudo command. Groups or users with the Lighthouse Administrator role are added to the admin group, which is in the list of allowed sudoers. On first boot of a new Lighthouse instance, the root user is the only member of the admin group and the only user with sudo access.
MODIFYING EXISTING GROUPS
To modify an existing group: 1. Select SETTINGS > Groups and Roles. If necessary, click on the USER
GROUPS tab. 2. Click the name of the group to be modified. 3. Click the Edit icon on the upper right and make desired changes.

23.04.0

Managing Lighthouse Users

225

4. Click Save Group.

The group details page allows the group's Description, Access Controls, Roles, Linked Smart Group, and Port Filter to be set and changed.
If a Group's Role is Lighthouse Administrator, the group's Smart Group is All Nodes and Port Filter is All Ports. This cannot be changed. If a Group has a Smart Group other than All Nodes or a Port Filter other than All Ports, the group's Role cannot be set to Lighthouse Administrator.
See Creating Smart Groups for details regarding creating and using Smart Groups and Port Filters for details regarding creating and using Port Filters.
The Groups page also allows you to delete groups. All users who were members of the deleted group lose any access and administrative rights inherited from the group.
Note: The netgrp group is inherited as the primary group for all remote AAA users who are not defined locally on Lighthouse. By default, netgrp has the Lighthouse Administrator role and is disabled - it must be enabled to take effect for remote AAA users.

23.04.0

Managing Lighthouse Users

226

USE AN EXISTING GROUP AS A TEMPLATE FOR A NEW GROUP
To use an existing group as a template for a new group: 1. Select SETTINGS > USER MANAGEMENT > Groups and Roles. If necessary,
click on the USER GROUPS tab. 2. Click the name of the group to be used as a template. 3. Click the Use as Template icon on the upper right. This opens a new group page
with the settings from the group you selected as a template. 4. Change the Group Name and make and other desired changes. 5. Click Save Group.
CREATE A NEW ROLE
You can create a new role in two ways, either from the Roles tab or by using an existing role as a template. To create a new role from the Roles tab:

23.04.0

Managing Lighthouse Users

227

1. Select SETTINGS > USER MANAGEMENT > Groups and Roles. 2. Click the ROLES tab.
3. Click + button. The Create Role page opens

4. Enter a Role Name and Role Description.

5. Modify the CLI Permissions for as desired.

Console Shell Access: Ability to connect to nodes' command lines via

Lighthouse's SSH.

Shell Access: Ability to access Lighthouse's command line as administrator.

PM Shell Access: Ability to connect to serial ports via SSH.

23.04.0

Managing Lighthouse Users

228

6. You can also control the Operation Permissions for the new role independently. Specify Full Access, Read Only, or Deny. Click to the right of each Operation row to see all options.
Note: See Available Operations Permissions for a list of all options.
7. Click Save Role. To create a new role from an existing role: A new role can also be based on an existing role with the Use as template link on the upper right of a role's detail page. 1. Select SETTINGS > USER MANAGEMENT > Groups and Roles. 2. Click the ROLES tab. 3. Select the role you wish to copy from the list. 4. Click Use as template. The Create Role tab displays with all the settings of the
existing role. Make changes if necessary. 5. Click Save Role to create the new role.
WORK WITH USERS
You can create new users, edit existing users, delete users and alter groups and permissions.

23.04.0

Managing Lighthouse Users

229

CREATING NEW LOCAL USERS
To create a new local user: 1. Select SETTINGS > USER MANAGEMENT > Local Users.
By default, the root user is the only user listed. 2. Click the + button. The New User page displays

3. Enter a Username, Description, and Password. 4. Re-enter the Password in the Confirm Password field. 5. Click on Add User Group to add this user to any existing User Groups. 6. Choose which CLI options this user should have. 7. Select any Operation Permissions this user should have. 8. Select the User Enabled checkbox. Click Save User.

23.04.0

Managing Lighthouse Users

230

Note: When a new user is created, an entry is added to the syslog, indicating the new user's name, the user that performed the operation, database queries, and the time that it occurred:
2020-05-22T16:22:46.490627+01:00 localhost rest_api_log[62]: GET 200 (root | 192.168.1.230) - /api/v3.5/users?page=1&per_page=10 RESPONSE= {'users': [{'username': 'root', 'description': 'System wide SuperUser account', 'enabled': True, 'id': 'users-1', 'no_password': False, 'expired': False, 'locked_out': False, 'rights': {'delete': True, 'modify': True}, 'groups': ['groups-2']}, {'username': 'fred', 'description': 'fred', 'enabled': True, 'id': 'users-2', 'no_ password': False, 'expired': False, 'locked_out': False, 'rights': {'delete': True, 'modify': True}, 'groups': ['groups-2']}], 'meta': {'total_pages': 1}}
If the created user is set to disabled, the configurator_users message does not appear as they have not been added to the passwords file. The syslog can be accessed from Lighthouse by clicking Help > Technical Support Report.

CREATE NEW LOCAL USERS FOR REMOTE AUTHENTICATION

To create a new user without a password which causes them to fail back to remote authentication:

1. Select SETTINGS > USER MANAGEMENT > Remote Authentication 2. Choose a Scheme and enter appropriate settings.

23.04.0

Managing Lighthouse Users

231

3. Select SETTINGS > USER MANAGEMENT > Local Users 4. Click the + button. The New User dialog loads. 5. Enter a Username and Description. 6. Select the Remote Password Only checkbox. 7. Select the Enabled checkbox. The Password and Confirm Password fields are
disabled. 8. Click Save User.

Note: When a new user is created, an entry is added to the syslog, indicating the new user's name, the user that performed the operation, database queries, and the time that it occurred:

2020-05-22T16:22:46.490627+01:00 localhost rest_api_log[62]: GET 200 (root | 192.168.1.230) - /api/v3.5/users?page=1&per_page=10 RESPONSE= {'users': [{'username': 'root', 'description': 'System wide SuperUser account', 'enabled': True, 'id': 'users-1', 'no_password': False, 'expired': False, 'locked_out': False, 'rights': {'delete': True, 'modify': True}, 'groups': ['groups-2']}, {'username': 'fred', 'description': 'fred', 'enabled': True, 'id': 'users-2', 'no_ password': False, 'expired': False, 'locked_out': False, 'rights': {'delete': True, 'modify': True}, 'groups': ['groups-2']}], 'meta': {'total_pages': 1}}

If the created user is set to disabled, the configurator_users message does not appear as they have not been added to the passwords file.

The syslog can be accessed from Lighthouse by clicking Help > Technical Support Report.

23.04.0

Managing Lighthouse Users

232

MODIFY EXISTING USERS
To edit settings for an existing user: 1. Select SETTINGS > USER MANAGEMENT > Local Users 2. Click the name of the user to edit this user and make desired changes. You may
change CLI access and specific access to operations. You may also control which groups this user is a member of. 3. Click Save User.

The Edit Users dialog also allows the user's Description to be changed and the user's Password to be reset. The username cannot be changed. To disable a user, uncheck the Enabled checkbox.

23.04.0

Managing Lighthouse Users

233

Note: Disabled users cannot login to Lighthouse using either the Web-based interface or via shell-based logins (that is sshusernamedisabled@lighthouse-name-or-ip). The user and the /home/usernamedisabled directory still exist in the Lighthouse VM file system.
EXPIRE USER PASSWORD
You can set user passwords to expire. To ensure a user's password is set to expire: 1. Select SETTINGS > USER MANAGEMENT > Local Users. 2. Click the Expire Password button in the Actions section of the user to be
deleted.
3. Click Yes in the Confirmation dialog. The next time this user logs in, the user will be required to change the password.

23.04.0

Managing Lighthouse Users

234

SETTING LOGIN RESTRICTIONS
Login restrictions can be applied by administrator users to prevent unauthorized login attempts via the UI and REST API.
Note: This does not affect SSH or Console logins.
1. Select SETTINGS > USER MANAGEMENT > Login Restrictions.

2. Enter a value for either or both of the following: l Maximum attempts choose a number of attempts a user can enter an incorrect password before being locked out. l Lockout period enter a number of minutes until a user can try to login again after reaching maximum incorrect login attempts.
After a user has been locked out, an administrator can unlock the account.

23.04.0

Managing Lighthouse Users

235

1. Go to SETTINGS > USER MANAGEMENT > Local Users. 2. Click the Unlock button associated with the locked out user's row in the User
table.

DISABLING A LIGHTHOUSE ROOT USER
To disable a root user:
1. Make sure that another user exists that is in a group that has the Lighthouse Administrator role.
2. Select SETTINGS > USER MANAGEMENT > Local Users 3. Click Disable in the Actions section of the root user. 4. Click Yes in the Confirmation dialog. To re- enable the root user, login as another user with Lighthouse Administrator role and enable access for root user from Actions section on Users page
An Identity Provider (IdP) stores and manages users' digital identities An IdP may check user identities via username-password combinations and other factors, or it may simply provide a list of user identities that another service provider (like an SSO) checks. An IdP can authenticate any entity connected to a network or a system, including computers and other devices.

23.04.0

Managing Lighthouse Users

236

DELETE AND DISABLE USERS
You can delete users and disable root users. To delete a user: 1. Select SETTINGS > USER MANAGEMENT > Local Users 2. Click the Delete button in the Actions section of the user to be deleted. 3. Click Yes in the Confirmation dialog. Disabling a Lighthouse root user To disable a root user: Make sure that another user exists that is in a group that has the Lighthouse Administrator role. 1. Select SETTINGS > USER MANAGEMENT > Local Users 2. Click Disable in the Actions section of the root user. 3. Click Yes in the Confirmation dialog. To re-enable root user: 1. Log in with an existing user id that is in a group with the Lighthouse Administrator
role. 2. Click Enable in the Actions section of the root user. An Identity Provider (IdP) stores and manages users' digital identities. An IdP may check user identities via username-password combinations and other factors, or it may simply provide a list of user identities that another service provider (like an SSO) checks. An IdP can authenticate any entity connected to a network or a system, including computers and other devices.

23.04.0

Managing Lighthouse Users

237

SAML CONFIG FOR SSO
SAML is the framework used to integrate applications with identity providers for single sign-on (SSO). This is mostly (if not completely) reflected when a user logs in and authenticates with their IdP or is already logged in (if they have already authenticated with their identity provider prior to accessing Lighthouse).
Lighthouse supports the independent, concurrent use of both SAML and AAA authentication. SAML authentication is independent of, and does not interact with, other authentication methods.
Note: For release 21.Q4 SAML is only supported for authentication to the lighthouse Web GUI.
When SAML is configured and enabled, users can authenticate to the Lighthouse Web GUI either through SAML or another configured authentication mechanism such as Local or AAA. Users can SSH only via the other configured authentication mechanism (Local or AAA) if Remote Authentication is configured.
The default authentication is Local, with Lighthouse using locally defined users and groups. If AAA (TACACS, RADIUS or LDAP) Remote Authentication is configured, this will be used for Web GUI and SSH login authentication to Lighthouse (except for root which is always locally authenticated). Users are authenticated against AAA server(s) with group membership returned to Lighthouse, which is used to determine user roles and permissions. AAA Remote Authentication can support 2FA/MFA, depending on the AAA server capabilities.
Lighthouse's SAML integrates with the following identity providers:
l OKTA l Azure Active Directory (Azure AD)

23.04.0

Managing Lighthouse Users

238

l One Login l Auth0
Note: In the following instructions, any text in braces {} for example, {main lighthouse address} needs to be substituted with the value for your environment.
Common values you will need are: {main lighthouse address} - The address (without the protocol or path) most users use to connect to your primary lighthouse's web interface. e.g. lighthouse.example.com or 192.168.1.10 {provider} - Each IdP implements the spec slightly differently lighthouse needs to know which style to expect to handle these differences. If your IdP is not one of our officially supported IdPs, try configuring lighthouse using the generic provider option as the most widely applicable. (You could also try using our other explicit IdP options but these often expect provider specific intricacies). Please also review the limitations of the Lighthouse SAML SSO feature.
GENERIC IDP SETUP
This section describes how to integrate Lighthouse with your Generic Identity Provider (IdP) Application. In case Lighthouse's supported IdPs doesn't include your identitiy provider, use the Generic IdP setup. This has been made as general as possible to meet expectations of all IdPs in the market today.

23.04.0

Managing Lighthouse Users

239

Note: You must have your user groups setup in Lighthouse prior creating & assigning them via the IdP. See the example in step 6 of the Okta configuration later in this topic.

Note: The {provider} in the steps must exactly match one of our provider strings that is, generic, okta, azure_ad, onelogin.
1. Create an application integration for "Lighthouse" in your IdP 2. Set ACS or consumer URL as https://{main lighthouse
address}/api/v3.7/sessions/saml/sso/{provider} 3. Set the Allowed SSO URLs or Allowed redirect URLs or ACS URL Validator
to include or match the /saml/sso/ URL for each address of each of your Lighthouses that you want users to be able to login from. Example:

https://{main lighthouse address}/api/v3.7/sessions/saml/sso/ {provider} https://{main lighthouse ip address}/api/v3.7/sessions/saml/sso/ {provider} https://{secondary lighthouse address}/api/v3.7/sessions/saml/sso/ {provider}

Depending on your IdP you may need to include the /saml/sp_init/ URLs.

https://{main lighthouse address}/api/v3.7/sessions/saml/sso/ {provider} https://{main lighthouse address}/api/v3.7/sessions/saml/sp_init/ {provider} https://{main lighthouse ip address}/api/v3.7/sessions/saml/sso/

23.04.0

Managing Lighthouse Users

240

{provider} https://{main lighthouse ip address}/api/v3.7/sessions/saml/sp_init/ {provider} https://{secondary lighthouse address}/api/v3.7/sessions/saml/sso/ {provider} https://{secondary lighthouse address}/api/v3.7/sessions/saml/sp_ init/{provider}
4. Set the Service Provider EntityID or Audience as lighthouse-{provider} 5. If your service provider requires you to configure the Recipient l And only allows a single value l And you run multiple Lighthouses or access Lighthouse via multiple addresses Then either: l Set the recipient as lighthouse-{provider} and use the onelogin option as your
provider configuration. l Or if you only access each via a single address you could create a separate
application integration per lighthouse. 6. If your IdP has the option then set the initiator to the Service Provider 7. Set your IdP to sign the Assertion for SAML
GENERIC IDP SAML ATTRIBUTE
You will also need to configure your IdP to send an additional attribute LH_Groups as part of the SAML response.

23.04.0

Managing Lighthouse Users

241

In most IdPs this is done by adding an Attribute Statement or Parameter configuration in your application integration. This parameter should be set as a multi-value parameter, that is, multiple values should be provided by multiple duplicative either Attribute Value tags or Attribute tags in the SAML assertion. We recommend setting the value of this attribute to be populated with the names of the user's Roles (or Groups) in your IdP. This method allows you to create roles in your IdP with the same names as the user groups on your lighthouse that can be assigned in your IdP to grant users that level of access to lighthouse. Alternatively, you can populate the LH Groups attribute with the names of the lighthouse user groups the user should be granted by any other mechanism that your IdP provides. i.e. custom user properties
Note: Your IdP can populate the LH_Groups attribute to place users in any lighthouse user group except lighthouse's default admin group. You can allow users to login with admin privileges by simply creating another user group in lighthouse with the admin role and assigning the matching role/group in your IdP to the user (i.e. populate LH_Groups to include its value).
LIGHTHOUSE SETUP
You will need to export an IdP metadata xml file for your Lighthouse application integration from your IdP. If your IdP requires that requests be signed by the Service Provider then you will also need to provide an x509 certificate & private key in .pem format (either exported from your IdP or created locally then configured in your IdP). 1. Upload your IdP metadata XML (and if required certificate & private key) to your
primary Lighthouse i.e. scp

23.04.0

Managing Lighthouse Users

242

2. Use the saml-idp-metadata command to configure each lighthouse individually. Each Lighthouse is configured individually with the same or a different metadata xml (and certificate + key).
Note: Note: the commands to configure each Lighthouse individually, all must be run from your primary Lighthouse.
# Example: Configuring a Multi-Instance Lighthouse for Okta IdP # List initial lighthouse configurations (i.e. none) saml-idp-metadata list # Configure Primary lighthouse saml-idp-metadata create \ --metadata metadata.xml \ --provider okta \ --lh-id 1 #Configure Secondary lighthouse saml-idp-metadata create \ --metadata metadata.xml \ --provider okta \ --lh-id 2 # List lighthouse configurations (i.e. both lighthouses configured) saml-idp-metadata list
Specific examples of IdP setups are available, The following are examples of how you could configure officially supported IdPs. They are based on the above generic step and the IdP's configuration options as of 10/2021.

23.04.0

Managing Lighthouse Users

243

EXAMPLES OF SPECIFIC IDP SETUPS
The following are examples of how you could configure officially supported IdPs. They are based on the above generic step and the IdP's configuration options as of 10/2021.
OKTA
CREATE AN APPLICATION
You need to create an application that Okta will be doing authentication on behalf of.
Note: You'll need to know what the addresses of your Lighthouses before creating the application.
1. In the Okta web console go to Applications - > Applications a. Click Create App Integration b. Select SAML 2.0
2. Give the application a name: for example, Lighthouse and click Next 3. For the Single sign on URL enter
https://{main lighthouse address}/api/v3.7/sessions/saml/sso/okta a. Tick both:
i. Use this for Recipient URL and Destination URL ii. Allow this app to request other SSO URLs

23.04.0

Managing Lighthouse Users

244

b. Fill out the Requestable SSO URLs with the SSO URLs for every lighthouse address you want to be able to sign in with. i.e. IP addresses and DNS address for both your primary and secondary lighthouses. Example:
4. For the Audience URI (SP Entity ID) enter lighthouse-okta 5. Set Name ID format to email. 6. Set to email. 7. There are many ways you could configure Okta to populate the LH_Groups
attribute, our recommended way is to populate it from and manage it via the user's Okta groups: a. Add a Group Attribute Statement
i. Name: LH_Groups ii. Name Format: Basic iii. Filter: Matches Regex .* 8. Click Next and finish. IdP Metadata 1. Open your Onelogin application. 2. Go to More Actions > SAML Metadata. This is the metadata xml file that you will need to configure lighthouse. Configure Lighthouse 1. Copy the Identity Provider metadata XML to your primary lighthouse. 2. Using saml-idp-metadata on your primary lighthouse, configure each of your lighthouses to use your IdP For example:

23.04.0

Managing Lighthouse Users

245

saml-idp-metadata -p {root password} create -m /path/to/okta_ metadata.xml -P okta -n "My Okta display name" -l {LH id number}
Groups setup After this initial setup, you will be able to login as a SAML user. If you do not already have your own User groups setup in lighthouse: 1. Login to Lighthouse as a local user (or any non-SAML user) i.e. root 2. Create the User groups with the Roles and permission that you desire. See
""Creating new user and group templates" on page 202". 3. In Okta go to Directory > Groups. 4. Click Add Group. 5. Enter the Group name that matches a Group name on lighthouse. 6. Open your new group. 7. Go to Manage Apps. 8. Search for your lighthouse app and click Assign. 9. Click Done. 10. Go to Manage People 11. Search for and click on the users you wish to add to the group. The assigned users are now able to login to lighthouse with the permission levels which that group grants them.

ONELOGIN
Create an Application. You need to create an application that Onelogin will be doing authentication on behalf of.

23.04.0

Managing Lighthouse Users

246

1. Go to Applications > Add App > Search for and choose SAML Custom Connector (Advanced)
2. Name your connector, that is, Lighthouse. 3. In the Configuration tab for your new app
a. Set Audience (EntityID) to lighthouse-onelogin b. Set Recipient to lighthouse-onelogin c. Set ACS (Consumer) URL to:
https://{main lighthouse address}/api/v3.7/sessions/saml/sso/onelogin
d. Set ACS (Consumer) URL Validator to a regex expression that matches only all your lighthouses' SSO addresses (IP & DNS for Primary & Secondary lighthouses). i. Ensure it begins with ^ and ends with $ to match the whole url. ii. Recommended pattern: ^https:\/\/ {lighthouse addresses} \/api\/v3\.7\/sessions\/saml\/sso\/onelogin$
iii. For example to allow Onelogin login for lighthouse addresses 192.168.1.10 and lighthouse.example.com , you could use the following: (note the additional () around your hostnames and the | separating them. ^https:\/\/ (192\.168\.1\.10|lighthouse\.example\.com)\/api\/v3\.7\ /sessions\/saml\/sso\/onelogin$
e. Set Login URL to https://{main lighthouse address}/api/v3.7/sessions/saml/sp_init/onelogin

23.04.0

Managing Lighthouse Users

247

f. Set SAML initiator to Service Provider g. Set SAML signature element to Assertion 4. The recommended method to populate LH_Groups is with Onelogin Roles. a. Go to Parameters then click Add. b. Set Field Name to LH_Groups c. Check Include in SAML assertion d. Check Multi-value parameter e. Click Save. f. Set Default value to User Roles g. If you intend on filtering the Roles that are sent to lighthouse (using a Rule) set
no transform otherwise set semicolon delimited. l An example Rule to filter roles:

o "Set LH_Groups in"

for each role

o with a value that matches LH_.* h. Save the parameter. 5. Save the connector.

IdP Metadata

1. Open your Onelogin application. 2. Go to More Actions > SAML Metadata. This is the metadata xml file that you will
need to configure lighthouse.

Configure Lighthouse

23.04.0

Managing Lighthouse Users

248

1. Copy the metadata xml to your primary lighthouse. 2. Using saml-idp-metadata on your primary lighthouse, configure each of your
lighthouses to use your IdP., For example saml-idp-metadata -p {root password} create -m /path/to/metadata.xml -P onelogin -n "My Onelogin display name" -l {LH id number}
Roles Setup After this initial setup, you will be able to login as a SAML user. If you do not already have your own Usergroups setup in lighthouse: 1. Login to Lighthouse as a local user (or any non-SAML user) for example, root. 2. Create the Usergroups with the Roles and permission that you desire. See
"Creating New Groups and Roles" on page 221. 3. In Onelogin Go to Users > Roles 4. Click New Role.
a. Set the Role's name to match the lighthouse group you want it to map to. b. Select your Lighthouse app to associate the role with. c. Click Save. 5. Open the newly created role. 6. Go to the Users tab on the left. 7. Search for and add your users or create a mapping to automatically add multiple users. 8. Click Save. a. If you used a mapping then go to Users > Mappings and run Reapply All

23.04.0

Managing Lighthouse Users

249

Mappings. 9. Click Done
The assigned users are now able to login to lighthouse with the permission levels that the Onelogin Role/Lighthouse group grants them.
AZURE ACTIVE DIRECTORY
Lighthouse can be added as an Enterprise application to Azure Active Directory. This example uses "App roles" to grant users permissions. To create an Application (Enterprise applications) 1. Go to Azure Active Directory. 2. Go to Enterprise applications. 3. Click New Application. 4. Click Create your own application. 5. Select Integrate any other application you don't find in the gallery (Non-
gallery). 6. Name your Application, for example, Lighthouse, then click Create. 7. Click Properties
a. Set Assignment required to Yes. b. Set Enabled for users to sign-in to Yes. c. Click Save. 8. Go to Single sign-on a. Select SAML b. Edit Basic Configuration

23.04.0

Managing Lighthouse Users

250

i. Add an Entity Id lighthouse-azure_ad and set it as default. ii. In Reply URL (Assertion Consumer Service URL) add the SSO URL for
each address of each lighthouse that you want to be able to sign in on. i.e. IP addresses and DNS address for both your primary and secondary lighthouses. https://{primary lighthouse address}/api/v3.7/sessions/saml/sso/azure_ad https:// {primary lighthouse IP address}/api/v3.7/sessions/saml/sso/azure_ad https:// {secondary lighthouse address}/api/v3.7/sessions/saml/sso/azure_ad https:// {secondary lighthouse IP address}/api/v3.7/sessions/saml/sso/azure_ad iii. Set Sign on URL to https://{main lighthouse address}/api/v3.7/sessions/saml/sp_init/azure_ad iv. Click Save. c. Edit Attributes & Claims i. Remove the default claims from Additional claims. ii. Click Add new claim and Enter: l Name: LH_Groups l Source Attributes: user.assignedroles
IdP Metadata 1. Go to the Azure Active Directory. 2. Go to Enterprise applications and open your application. 3. Go to Single sign-on.

23.04.0

Managing Lighthouse Users

251

4. Navigate to 3. SAML Signing Certificate and find and download Federation Metadata XML.
Configure Lighthouse 1. Copy the Federation metadata XML to your primary lighthouse. 2. Using saml-idp-metadata on your primary lighthouse, configure each of your
lighthouses to use your IdP as follows: For example, saml-idp-metadata -p {root password} create -m /path/to/metadata.xml -P azure_ad -n "My Azure display name" -l {LH id number}
App Roles Setup After this initial setup, you will be able to login as a SAML user. If you do not already have your own Usergroups setup in Lighthouse, you can set them up as follows: 1. Login to Lighthouse as a local user (or any non-SAML user) i.e. root 2. Create the Usergroups with the Roles and permission required. See "Creating
New Groups and Roles" on page 221. See Add app roles and get them from a token - Microsoft identity platform for up to date documentation on how to create and assign App Roles. 1. Go to Azure Active Directory. 2. Go to App registrations. 3. Open your app (Use the All Applications tab to see Enterprise apps). 4. Go to App Roles. 5. Click Create App Role.

23.04.0

Managing Lighthouse Users

252

a. Set the value to match your usergroup on Lighthouse. b. Set Allowed member types to Both (Users/Groups +
Applications). c. Set the other fields as required. 6. Go to Azure Active Directory. 7. Go to Enterprise applications. 8. Open your App, that is, Lighthouse. 9. Go to Users and groups. 10. Click Add user/group. 11. Select a user and one of your App roles then click Assign. The assigned users are now able to login to lighthouse with the permission levels which that App Role/Lighthouse group grants them.
CONFIGURE AUTH0 FOR IDP
Lighthouse can be added as an Enterprise application to AUTH0. This example uses "App roles" to grant users permissions.
CREATE AN APPLICATION (ENTERPRISE APPLICATIONS)
1. Go to Auth0. 2. Go to Applications > Application. 3. Click Create application.

23.04.0

Managing Lighthouse Users

253

a. Select Regular Web Application. b. Name the application, for example, Lighthouse. 4. Go to Settingstab. a. Select SAML. b. Set Application Login URI to

https://{main lighthouse address}/api/v3.7/sessions/saml/sp_ init/auth0

c. In Allowed Callback URLs add each address for each lighthouse that you wish to allow users to sign-in via. (that is, IP, hostname, dns for both primary and secondary).

https://{primary lighthouse address}/api/v3.7/sessions/saml/sso/auth0 https://{primary lighthouse IP address}/api/v3.7/sessions/saml/sso/auth0 https://{secondary lighthouse address}/api/v3.7/sessions/saml/sso/auth0 https://{secondary lighthouse IP address}/api/v3.7/sessions/saml/sso/auth0

d. Click Save.

5. Go to the Addons tab:

Click SAML2.

Go to the SAML settings tab.

Set the Settings json to

23.04.0

Managing Lighthouse Users

254

{ "audience": "lighthouse-auth0", "mappings": { "roles": "LH_Groups" }, "passthroughClaimsWithNoMapping": true, "mapUnknownClaimsAsIs": true, "nameIdentifierFormat": "urn:oasis:names:tc:SAML:1.1:nameidformat:emailAddress", "nameIdentifierProbes": [ "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/emailaddres s" ] }
d. Click either Enable or Save. 6. Go to Auth Pipeline. 7. Go to Rules. 8. Click Create.
a. Select empty rule template. b. Name it appropriately, for example, Map roles to SAML user property. c. Set the script to
function mapSamlAttributes(user, context, callback) { user.roles = (context.authorization || {}).roles; callback(null, user, context); }

23.04.0

Managing Lighthouse Users

255

9. Click Save.

CONFIGURE AUTH0 METADATA FOR IDP
To setup the IDP metadata: 1. Go to Auth0. 2. Go to Application > Applications. 3. Open your Lighthouse application. 4. Go to Addons. 5. Go to SAML. 6. Go to Usage. 7. Click the Identity Provider Metadata download. A file named metadata.xml downloads to your preferred directory

CONFIGURE LIGHTHOUSES FOR AUTH0 FOR IDP
In this step you will use the downloaded file to configure each of your lighthouses to use your Auth0 IdP. 1. Copy the downloaded metadata.XML file to your primary lighthouse. See
"Configure AUTH0 Metadata for IdP" above. 2. Use the saml-idp-metadata file on your primary lighthouse, configure each of
your lighthouses to use your IdP with this command: saml-idp-metadata -p {root password} create -m /path/to/metadata.xml -P auth0 -n "My Auth0 display name" l {LH id number}
See"SAML Config for SSO" on page 238

23.04.0

Managing Lighthouse Users

256

CONFIGURE AUTH0 FOR IDP
After you have added Lighthouse as an Enterprise application to AUTH0, you need to use the App roles feature to grant users permissions to use IdP. After this initial setup, you will be able to login as a SAML user. 1. If you do not already have your own Usergroups setup in Lighthouse:
a. Login to Lighthouse as a local user (or any non-SAML user) for example, root. b. Create the Usergroups with the required Roles and permission. 2. Go to Auth0. 3. Go to User Management. 4. Go to Roles. 5. Click Create Role. 6. Enter the Role name that matches a Lighthouse group name. 7. Open your Role. 8. Go to the Users tab. 9. Click Add Users. a. Assign the role to the appropriate users. 10. The assigned users are now able to login to Lighthouse with the permission levels granted by the Auth0 Role/Lighthouse group.

23.04.0

Managing Lighthouse Users

257

LIMITATIONS OF SAML CONFIGURATION

IDP METADATA CERTIFICATE EXPIRY
The Identity Provider (IdP) metadata XML file that you exported to configure Lighthouse contains a certificate that is used to authenticate that the SAML response came from your IdP.
Different IdPs have different expiry periods for these certificates, consult your IdP's documentation to find their expiry period. When your IdP's certificate expires you will need to regenerate it then re-export your IdP metadata and update your Lighthouse configurations. If your IdP supports sending expiry notifications to your admin, we recommend you enable these notifications.

MAKING CHANGES TO USER PERMISSIONS
When you change the permissions assigned to a Lighthouse user in your IdP (via LH_Groups SAML attribute), the changes will not take effect until the user logs out and back into Lighthouse.
If you need to quickly restrict a user's access, consider altering the permissions of or deleting that user's usergroups on Lighthouse, see "Modifying existing groups. You can also set a low Web Session Timeout. See Examine or modify Lighthouse Session Settings.

SAML SSO USERGROUPS

The LH_Groups attribute can be used to place SSO users in any Lighthouse usergroup except Lighthouse's default admin group. You can allow users to login with admin privileges by simply creating another usergroup in Lighthouse with the

23.04.0

Managing Lighthouse Users

258

admin role and assigning the matching role/group in your IdP to the user (i.e. populate LH_Groups to include its value).
SAML SSO USERS
SAML Users can only be managed in your IdP and will not appear under Lighthouse User Management.
CONFIGURING AAA
Lighthouse supports three Authentication Authorization and Accounting (AAA) systems: l LDAP (Active Directory and OpenLDAP) l RADIUS l TACACS+ Authentication works much the same with each, but group membership retrieval varies. The following sections detail the configuration settings for each provider and explain how group membership retrieval works.
LDAP CONFIGURATION
To begin, select SETTINGS > USER MANAGEMENT > Remote Authentication.

23.04.0

Managing Lighthouse Users

259

1. Select LDAP from the Scheme drop-down menu. 2. Choose the desired Mode from the drop-down menu.
l LDAPDownLocal l LDAP: Default behavior l LDAP/Local l Local/LDAP
Note: See the Glossary for more information about these modes.

23.04.0

Managing Lighthouse Users

260

3. Add the Address and optionally the Port of the LDAP server to query. 4. Add the LDAP Base DN that corresponds to the LDAP system being queried.
For example, if a user's distinguished name is cn=John Doe,dc=Users,dc=ACME,dc=com, the LDAP Base DN is dc=ACME,dc=com 5. Add the LDAP Bind DN. This is the distinguished name of a user with privileges on the LDAP system to perform the lookups required for retrieving the username of the users, and a list of the groups they are members of. 6. Add and confirm a password for the binding user. 7. Add the LDAP username attribute. This depends on the underlying LDAP system. Use sAMAccountName for Active Directory systems, and uid for OpenLDAP based systems. 8. Add the LDAP group membership attribute. This is only needed for Active Directory and is generally memberOf. 9. If desired, check Ignore referrals option. When checked, LDAP will not follow referrals to other remote authentication servers when logging users in to Lighthouse. If multiple remote authentication servers exist on the network, checking this option may improve login times. 10. Under the SSL section, choose the desired Server protocol. a. LDAP over SSL preferred: this will attempt LDAPS before trying LDAP
without SSL b. LDAP (no SSL) only: non-SSL LDAP is always used c. LDAP over SSL only: LDAP over SSL is always used 11. If desired, check Ignore SSL certificate errors to ignore any SSL certificate errors. 12. CA Certificate is used to upload an SSL Certificate which will verify any LDAP servers you specify on the page.

23.04.0

Managing Lighthouse Users

261

Note: The certificate will be uploaded but will not be used if you've chosen to ignore certificate errors.
13. Install the CA certificate by clicking the Browse... button and locating the appropriate file.
14. Click Apply.
Note: Multiple servers can be added. The LDAP subsystem queries them in a round-robin fashion.
RADIUS CONFIGURATION
To configure RADIUS: 1. Select SETTINGS > USER MANAGEMENT > Remote Authentication.

23.04.0

Managing Lighthouse Users

262

1. In the Settings section, select RADIUS from the Scheme drop-down menu. 2. Choose the desired Mode from the drop-down menu.
l RADIUSDownLocal l Radius l RADIUS/Local l Local/RADIUS
Note: See the Glossary for more information about these modes.
3. Add the Address and optionally the Port of the RADIUS authentication server to query.

23.04.0

Managing Lighthouse Users

263

4. Add the Address and optionally the Port of the RADIUS accounting server to send accounting information to.
5. Add the Server password, also known as the RADIUS Secret.
Note: Multiple servers can be added. The RADIUS subsystem queries them in a round-robin fashion.
To provide group membership, RADIUS needs to be configured to provide a list of group names via the Framed-Filter-Id attribute. The following configuration snippet shows how this can be configured for FreeRADIUS: operator1 Auth-Type := System Framed-Filter-ID = ":group_ name=west_coast_admin,east_coast_user:"
Note: The Framed-Filter-ID attribute must be delimited by the colon character.
TACACS+ CONFIGURATION
To configure TACACS+:

23.04.0

Managing Lighthouse Users

264

1. Select SETTINGS > USER MANAGEMENT > Remote Authentication.

2. Select TACACS+ from the Scheme drop-down menu. 3. Choose the required Mode from the drop-down menu.
l TACACSDownLocal: l TACACS: Default behavior l TACACS/Local l Local/TACACS
Note: See the Glossary for more information about these modes.
4. Add the Address and optionally the Port of the TACACS+ authentication server to query.

23.04.0

Managing Lighthouse Users

265

5. Select the Login Method. PAP is the default method. However, if the server uses DES-encrypted passwords, select Login.
6. Add the Server password, also known as the TACACS+ Secret. 7. Add the Service. This determines the set of attributes sent back by the
TACACS+ server
Note: Multiple servers can be added. The TACACS+ subsystem queries them in a round-robin fashion.
To provide group membership, TACACS+ needs to be configured to provide a list of group names This following configuration snippet shows how this can be configured for a tac_plus server:
user = operator1 { service = raccess { groupname = west_coast_admin,east_cost_user } }
To do this with Cisco ACS, see Setting up permissions with Cisco ACS 5 and TACACS+ on the Opengear Help Desk.

SETTING PASSWORD POLICY

An Identity Provider (IdP) stores and manages users' digital identities. An IdP may check user identities via username-password combinations and other factors, or it may simply provide a list of user identities that another service provider (like an SSO) checks. An IdP can authenticate any entity connected to a network or a system, including computers and other devices. Lighthouse Administrators can set Password Policies to ensure that users set secure passwords.

To set a password policy:

23.04.0

Managing Lighthouse Users

266

1. Select SETTINGS > USER MANAGEMENT > Login Restrictions, 2. Choose Enabled, and 3. Click Save. Click Password Policy.
Choose one or more options from the following: l Minimum password length from 1 to 128 l Require at least one capital letter l Require at least one number l Require at least one symbol l Disallow username in password l Prevent password reuse choose a number of days or select Always l Set password expiry select a number of days until passwords expire. At next
login, the user will need to reset the password.
PASSWORD FIELDS IN LIGHTHOUSE
All password fields in Lighthouse are write-only. They accept data from the clipboard or pasteboard but do not pass data out.

23.04.0

Managing Lighthouse Users

267

ENABLING ADVANCED FUNCTIONALITY
This section describes how to use the advanced functionality that the Netops modules of IP Access, Secure Provisioning and Automation Gateway modules provide.
INTRODUCTION
NetOps modules leverage Opengear's remote presence and proximity to infrastructure by allowing software applications to run directly on top of the out-ofband management fabric. The NetOps modules enable automation of the configuration and operation of network infrastructure in data center and remote edge locations. The platform comprises the following: l Opengear Lighthouse software: The central management interface and
automation controller. l Managed Devices: Target infrastructure,for example, network switches from
Cisco or Cumulus. l Opengear Nodes: OM, CM, ACM and IM appliances, connected to managed
device management NICs via Ethernet (and optionally managed device consoles via RS-232 or USB serial). l NetOps Modules: Software components that enable automation of specific operational scenarios (for example, network device provisioning), deployed as Docker containers modules become active on Lighthouse when a module license is installed, they can then be manually or automatically activated on nodes.

23.04.0

Enabling Advanced Functionality

268

ABOUT NETOPS
NetOps modules require a Lighthouse with appropriate licensing and modules to be uploaded and active. You will also need at least one OGCS or NGCS node enrolled and able to use these modules. Lighthouse Enterprise contains the IP Access module, whereas, Lighthouse Enterprise: Automation Edition contains IP Access, Secure Provisioning and Automation Gateway. The NetOps modules are built as Docker containers and accessed through the Lighthouse GUI.
NETOPS PLATFORM SECURITY
The NetOps Automation platform uses a combination of advanced hardware and software security features to provide end-to-end security and resilience against network breach, fault or failure. All communications between Lighthouse and nodes are tunneled inside Lighthouse VPN, using strong ciphers and automated certificate authentication and revocation. Nodes such as the OM and CM8100 contain a TPM chip, which verifies the authenticity of the OM system software, its configuration, and NetOps Module code and data any unauthorized tampering will render the appliance inoperable. These nodes are physically hardened to resist tampering attempts to physically to access storage media will render the appliance inoperable With a built-in cellular capability nodes with the TPM chip provide a secure WAN uplink in the event of network outage, DOS, or during initial network turn-up at a remote location.

23.04.0

Enabling Advanced Functionality

269

NETOPS MODULE MANAGEMENT
The NetOps modules, IP Access and Secure Provisioning, Automation Gateway, are stored in a private repository. Periodically, module updates and new modules may become available.
Note: You can upgrade NetOps Modules without upgrading Lighthouse software.

23.04.0

Enabling Advanced Functionality

270

UPGRADE MODULES FROM THE UI
1. Launch an HTTPS browser session to Lighthouse Login using root and the secure password set earlier.
2. You may also log in as a Lighthouse Administrator user, if you have configured one.
3. From the menu, select SETTINGS -> Services -> NetOps Modules. 4. Click the Synchronize widget. 5. From the menu, select CONFIGURE -> NetOps Modules -> Manage Modules. 6. Click the Redeploy icon.

23.04.0

Enabling Advanced Functionality

271

UPGRADE MODULES FROM THE CLI
Log in to the Lighthouse CLI as root. Or Log in as a Lighthouse Administrator and become root with:sudo -i Replace default with your root password and run: PROCEDURE for Lighthouse CLI Replace root and default with a Lighthouse Administrator or root credentials, then run the following:
USERNAME=root PASSWORD=default /etc/scripts/netops_sync_handler token=$(curl -k -L -d ' {"username":"'$USERNAME'","password":"'$PASSWORD'"}' "https://127.0.0.1/api/v3.0/sessions/" | python -c 'import sys, json; print json.load(sys.stdin)["session"]') curl -k -L -H "Content-Type: application/json" -H "Authorization: Token $token" "https://127.0.0.1/api/v3.0/netops/modules/dop/redeploy"

UPDATE NETOPS MODULES WITHOUT DOCKER ACCESS
If Lighthouse is deployed on a network where outbound access to the Docker Hub repository is not permitted or not available, use the NetOps offline installer script. This script has a built-in payload with everything required to update NetOps Modules

23.04.0

Enabling Advanced Functionality

272

on Lighthouse.

23.04.0

Enabling Advanced Functionality

273

USE A PRE-BUILT OFFLINE INSTALLER (VIA GUI)
1. Download the offline installer file (named netops_modules_*.tar.gz) from this link: offline installer file
2. Browse to Settings > Services > NetOps Modules and click Offline.
3. Click Browse and select the downloaded file. 4. Click Upload.
Note: This process can take up to 15 minutes. There are notifications detailing the process steps in the lower right hand corner as well as log entries in the system log.

23.04.0

Enabling Advanced Functionality

274

USE A PRE-BUILT OFFLINE INSTALLER (VIA CLI)
1. Download the offline installer file (named netops_modules_*.tar.gz) from this link: offline installer file.
2. Copy the offline installer to Lighthouse using scp, WinScp or similar, into the /mnt/nvram directory.
3. Log in to Lighthouse shell CLI as a Lighthouse Administrator and run:
gzip -d </mnt/nvram/netops_modules_*.tar.gz | nom update && rm /mnt/nvram/netops_modules_*.tar.gz
4. Deploy the upgrade to nodes: a. Log in to the Lighthouse web UI as a Lighthouse Administrator or the root user b. From the menu, select CONFIGURE NODES > NetOps Modules > Manage Modules. c. In the Status column, confirm the module versions now match the latest release versions. d. Click the Redeploy icon.
Note: Note: Using the offline install requires 8GB of free space in the /mnt/data partition.

UPGRADE NETOPS MODULES

NetOps Modules are released independently of Lighthouse software or Operations Manager firmware.
NetOps releases are uploaded to Opengear's file server, where they can be fetched by Lighthouse then deployed to all activated nodes by Lighthouse.

23.04.0

Enabling Advanced Functionality

275

Node upgrades may be carried out through either the Lighthouse UI or the CLI. PROCEDURE for Lighthouse UI 1. Log in to the Lighthouse web UI as a Lighthouse Administrator or the root user. 2. From the menu, select SETTINGS > Services > NetOps Modules.Select either
Online or Offline.
3. Click the Synchronize icon. A message displays with the status.

23.04.0

Enabling Advanced Functionality

276

4. From the menu, select CONFIGURE NODES > NetOps Modules > Manage Modules.
5. Click the Redeploy icon. PROCEDURE for Lighthouse CLI Replace root and default with a Lighthouse Administrator or root credentials, then run the following:
USERNAME=root PASSWORD=default /etc/scripts/netops_sync_handler token=$(curl -k -L -d ' {"username":"'$USERNAME'","password":"'$PASSWORD'"}' "https://127.0.0.1/api/v3.0/sessions/" | python -c 'import sys, json; print json.load(sys.stdin)["session"]') curl -k -L -H "Content-Type: application/json" -H "Authorization: Token $token" "https://127.0.0.1/api/v3.0/netops/modules/dop/redeploy"

ACTIVATE A NETOPS MODULE
IP Access is activated for both Enterprise Edition and Automation Editions. Secure Provisioning and Automation Gateway are activated from the Automation Edition license.

23.04.0

Enabling Advanced Functionality

277

The NetOps module license is installed on Lighthouse and contains a preset number of available node activations. Each supported node that is activated for the NetOps module provisioning, consumes an available activation; Lighthouse itself does not consume an activation.
Installing the NetOps module license automatically activates the module on Lighthouse, at which point the NetOps Automation platform deploys the central module software components, including the module's UI, to Lighthouse.
The process of automatically or manually activating a NetOps Module on a node deploys the remote module software components to that node, securely over Lighthouse VPN.

23.04.0

Enabling Advanced Functionality

278

ACTIVATE THE NETOPS MODULE ON LIGHTHOUSE
PREPARATION 1. Install the Lighthouse VM and ensure it is running. 2. Login to the Lighthouse web UI as root or a Lighthouse Administrator. 3. Install the Lighthouse node subscription (SKU OGLH) under SETTINGS >
System > Subscriptions.

23.04.0

Enabling Advanced Functionality

279

PROCEDURE 1. Ensure you have a valid NetOps Module licence installed under SETTINGS >
System > Subscriptions.
Note: The Enterprise Edition license includes the IP Access module. The Automation Edition license includes IP Access, Secure Provisioning, and Automation Gateway.
2. It will take a few minutes for the module to activate on Lighthouse, view progress under CONFIGURE NODES > NetOps Modules > Manage Modules.
3. Click the Update icon and note new module-specific menu items are now available under CONFIGURE NODES, for example, Secure Provisioning or IP Access.
Nodes may now be automatically activated for the module as they enroll, or manually activated after enrollment.

23.04.0

Enabling Advanced Functionality

280

'ALWAYS ACTIVATE' MODE ON ALL NODES (AUTOMATIC)
In the Always Activate mode, NetOps automatically activates the NetOps Module on all nodes, provided a license is present and activations are available. All nodes are activated for the module as they enroll.
PROCEDURE
1. Check and apply CONFIGURE NODES > NetOps Modules > Manage Modules > Module Name > Always Activate.
2. To activate a new node, enroll the node into Lighthouse, , see "Activate the Secure Provisioning Module on Lighthouse" on page 331

23.04.0

Enabling Advanced Functionality

281

ACTIVATE NETOPS ON SELECTED NODES (AUTOMATIC)
You may selectively activate the module on a subset of nodes using Enrollment Bundles. Only nodes enrolling using one of these bundles will be automatically activated.
PROCEDURE
1. Navigate to CONFIGURE NODES > NetOps Modules > Manage Modules > Module Name > Always Activate.
2. Uncheck Always Activate. 3. Click Apply. 4. Select CONFIGURE NODES > Node Enrollment > Enrollment Bundles and
add a new bundle (you may also edit an existing bundle). 5. Enter a bundle Name and Token, and choose whether or not to Auto-Approve
enrollment, see "Activate a NetOps Module" on page 277. 6. Scroll down to NetOps Modules and add the Module Name. 7. Enroll the node to Lighthouse, specifying the Enrollment Bundle Name and
Token.
Note: Lighthouse-initiated manual enrollment (for example, clicking the Add Node button in the Lighthouse web UI) does not support bundles, you must use a node-initiated enrollment method.

23.04.0

Enabling Advanced Functionality

282

ACTIVATE THE NETOPS MODULE ON NODES (MANUAL)
PROCEDURE
To activate nodes manually after enrollment, use the following steps:
1. Ensure CONFIGURE NODES > NetOps Modules > Manage Modules > Module Name > Always Activate is unchecked and applied.
2. Select CONFIGURE NODES > Configuration Templating > Apply Templates. 3. Under NetOps Module Activation, choose the Module Name and click Next. 4. Select the nodes to to activate, then click Next. 5. To ensure the preflight check has succeeded click the Update icon above the
table, then click Next. 6. Click the Update icon to ensure activation is successful.
Note: Under the NetOps licensing arrangement, once a node is activated for the NetOps Module, the activation is consumed by and locked to that node. Unenrolling the node returns the activation to the available pool. Under NetOps subscription arrangements, it would be counted towards the node assignment of the subscription.

DEACTIVATE (REMOVE) A NETOPS MODULE
To deactivate and remove a NetOps Module from a given node, use the following API call to Lighthouse:

DELETE /api/v3/netops/modules/module_id/nodes/node_id

where module_id is one of dop (Secure Provisioning), IP Access, or ag (Automation Gateway), and node_id is the internal node ID, for example, nodes-1.

23.04.0

Enabling Advanced Functionality

283

Follow the procedure below to remove NetOps Modules from a given node: 1. Log in to the Lighthouse CLI shell as root or a Lighthouse Administrator user. 2. Determine the node's node ID by running:
node-info --list
3. Update the highlighted fields with your username, password, the node ID and modules to deactivate, then run the following:

23.04.0

Enabling Advanced Functionality

284

LH_USERNAME="root" LH_PASSWORD="default" NODE_ID="nodes-1" MODULES_TO_DEACTIVATE="dop ag sdi"
token=$(curl -k -L -d '{"username":"'$LH_USERNAME'","password":"'$LH_ PASSWORD'"}' https://127.0.0.1/api/v1/sessions/ | cut -f10 -d'"')
for module_id in $MODULES_TO_DEACTIVATE; do curl -k -L -X DELETE -H "Authorization: Token $token"
https://127.0.0.1/api/v3/netops/modules/${module_id}/nodes/$NODE_ID done
AUTOMATION GATEWAY
Opengear allows you to set up your network using automation tools. Automation Gateway allows Lighthouse users and automation code to discover and manage IP-based management interfaces via the Opengear management system, with the same level of simplicity and efficiency as if they were serial consoles. Managed devices like firewalls and servers may present an IP-based management interface in addition to (or sometimes instead of) the traditional serial or USB console port. This interface may serve a web-based GUI, VNC or RDP based KVM, SSH-based CLI and/or a programmable network API like RESTful HTTPS. The device itself may be physical or virtual.

23.04.0

Enabling Advanced Functionality

285

By their nature, the IP-based management interfaces are more dynamic (for example, they may change IP address), varied (for example, protocols vary from device to device) and harder to reach (for example, on an un-routable private network).
The Automation Gateway module addresses the challenges of discovering, auditing and connecting to IP-based management services in a distributed, heterogeneous network. It is available on Operations Manager product lines, OM120x and OM22xx.
DIFFERENCES BETWEEN IP ACCESS AND AUTOMATION GATEWAY
The IP Access module provides the IP Access feature and the Automation Gateway module provides the Automation Gateway feature.
These two features are similar in that they both allow Lighthouse users to access network services on remote managed devices, however they accomplish this in different ways. One way to think about it is that IP Access transports the user to the remote network, whereas Automation Gateway transports a specific remote network service to user.
IP ACCESS
Using IP Access, the user must establish a VPN tunnel from their computer to Lighthouse, which then provides them with a routed connection to the entire network (s) connected to the remote node. Once the tunnel is up, the user can access any network service on any network device by their standard management IP addresses.
AUTOMATION GATEWAY

23.04.0

Enabling Advanced Functionality

286

Using the Automation Gateway feature, the user clicks through their existing Lighthouse browser session to access HTTP/HTTPS web GUI services of specific devices that have been discovered by the remote node. Access is limited to these services only, and the connections are proxied via Lighthouse's central address so no client or network reconfiguration is required.
HOW TO USE AUTOMATION GATEWAY
Using Automation Gateway, Lighthouse users can connect to the web UI of a remote physical & virtual managed device such as a firewall, lights-out server or SD-WAN appliance. Access is proxied via Lighthouse VPN via a remote node, allowing simply, point & click access to what may be an otherwise unreachable remote device.

23.04.0

Enabling Advanced Functionality

287

PROCEDURE
The basic steps to setup and use this feature are as follows: 1. Activate the Automation Gateway NetOps Module on an enrolled node, that is
on the same network as the remote device that you wish to reach. 2. Log in to the Lighthouse web UI as a user with at least NetOps Modules: Read
Only permission, and at least Nodes & Devices (Base): Read Only permission for the activated node. 3. Click CONFIGURE > AUTOMATION GATEWAY > Devices. 4. In the FILTER BY menu, select HTTPS or HTTP from the Services drop down. 5. Locate the remote device by hostname or IP address.
Note: If many remote devices have been discovered, use the FILTER BY menu to search by full or partial device hostname or IP address.
6. To initiate an Automation Gateway session, click the device's web UI icon.

23.04.0

Enabling Advanced Functionality

288

7. You are now connected the web UI of the remote device
Note: While an Automation Gateway session is active, all new browser tabs and windows that connect to Lighthouse are proxied through to the remote device web UI.
8. To close the Automation Gateway session, click the link at the bottom of the device web UI:
This system is being accessed via Lighthouse - click here to return to Lighthouse
CONNECT WITH REST/HTTP/HTTPS APIS
Automation Gateway allows central automation code to reach the HTTP/S API services running on devices on remote networks. For more details see: http://ftp.opengear.com/download/api/lighthouse/og-rest-api-specification-v3-7.html This is accomplished by modifying the request to add the X-Ip-Access-Auth HTTP header to your API request, and substituting the device's remote IP with Lighthouse's central IP. Requests containing the header are reverse proxied via Lighthouse then via an Operations Manager node that is local to the remote device. The example Python (3.5+) code below illustrates this. Note that this code is primarily for illustrative purposes with no error handling or modularity, for clarity & brevity. The device being accessed in this example is an HP ILO's Redfish REST API service.

23.04.0

Enabling Advanced Functionality

289

#!/usr/bin/env python3 # Example code showing how to reach a remote device REST API via Opengear # Lighthouse Automation Gateway -> Operations Manager node -> device # # This code is primarily for illustrative purposes with no error handling # or modularity, for clarity & brevity

import requests import json import base64

# Authenticate to Lighthouse

lighthouse_address = '192.168.67.20' lighthouse_account = 'root' lighthouse_password = 'default'

data = { 'username': lighthouse_account, 'password': lighthouse_password } r = requests.post('https://%s/api/v3.7/sessions/' %
lighthouse_address, data=json.dumps(data), verify=False) lh_token = json.loads(r.text)['session']

print('Authenticated to Lighthouse, token %s' % lh_token)

lh_headers = { 'Authorization': 'Token ' + lh_token }

# Find the node that is local to the remote device's API service

device_address = '10.0.0.71' # Equivalent to the UI fields under CONFIGURE >

23.04.0

Enabling Advanced Functionality

290

device_service = 'https' # AUTOMATION GATEWAY > Devices > Filter By
r = requests.get('https://%s/api/v3.7/nom/ag/devices?ip=%s&service=%s' % (lighthouse_address, device_address, device_service), headers=lh_headers, verify=False)
j = json.loads(r.text)
print(json.dumps(j, indent=4))
for _device in j['devices']: for _host in _device['hosts']: for _service in _host['services']: if _service['nmap']['name'] != device_service: continue for _avail in _service['availability']: node_id = _avail['id'] print('Service available via %s' % node_id) break
# Generate Automation Gateway token
data = { 'session': lh_token, 'request_type': 'new', 'url': 'https://%s' % device_address, 'node': node_id }
r = requests.post('https://%s/api/v3.7/nom/ag/auth_tokens' % lighthouse_address, data=json.dumps(data), headers=lh_headers,
verify=False) j = json.loads(r.text) ag_token = j['token']

23.04.0

Enabling Advanced Functionality

291

print('Automation Gateway token is %s' % ag_token)
ag_headers = { 'X-Ip-Access-Auth': ag_token }
# Now we can query the device API using the Lighthouse address, by including # the access token in the request headers
# The remaining code is specific to the device being accessed. this example # hits a Redfish-compliant REST API
device_username = 'baz' device_password = 'foobarfoobar' device_auth = base64.b64encode(('%s:%s' %
(device_username, device_password)).encode('utf-8')).decode('utf-8') device_headers = { 'Authorization': 'Basic %s' %
device_auth, 'Content-Type': 'application/json' }
# Add the access token to whatever headers you'd usually use to talk to the # device's native API -- this header will be stripped by Automation Gateway
_headers = { **ag_headers, **device_headers }
r = requests.get('https://%s/redfish/v1/systems/1/' % lighthouse_address, headers=_headers, verify=False)
j = json.loads(r.text) print(json.dumps(j, indent=4))

23.04.0

Enabling Advanced Functionality

292

AUTOMATION GATEWAY SERVICE DISCOVERY
Automation Gateway discovery process can take varied amount of time to complete, entirely based on the size of your scannable network. Services discovered by Automation Gateway are listed in the Lighthouse web UI, under CONFIGURE > Automation Gateway > Devices The discovery process can be restarted using the "Rescan" button on the Automation Gateway > Devices page. When an HTTP or HTTPS service has been discovered, it may also be accessed via this page. When a node has been activated for Automation Gateway, it begins to discover remote services. The discovery process is initiated by Lighthouse, and runs every 10 minutes. Each time the discovery process is initiated, the node runs an nmap script scan against all IPv4 connections belonging to the node's LAN firewall zone.
Note: Large logical networks with address space larger than 254 hosts (i.e. with a minimum netmask of /24 or 255.255.255.0) are excluded from the scan.
The nmap scan runs the default (non-intrusive) suite of nmap NSE scripts. These can be listed by running the following command on a node that has been activated for Automation Gateway:
sudo docker exec ag-remote cat /usr/share/nmap/scripts/script.db | awk -F\" '/"default"/ { print $2 }'

23.04.0

Enabling Advanced Functionality

293

IP ACCESS
The Lighthouse IP Access feature allows an engineer to reach hosts on a remote site via an OpenVPN client through Lighthouse, over the Lighthouse VPN fabric, without physically traveling to the site. If IP Access is enabled for Lighthouse, it can be managed from using the Configure > IP Access menu option on the Lighthouse web UI.
IP Access adds client VPN capability to Lighthouse. Network engineers, firewall and server administrators can launch a VPN client connection to Lighthouse, be authenticated, then automatically connected to the remote site management network. The client PC has a secure VPN tunnel to the remote equipment the user needs to work on, providing the same TCP/IP access they would get if they traveled to the site and plugged into the management LAN.
The client can then access target devices on the remote network directly by their usual IP addresses and network ports. Requests from the client are masqueraded behind the node's IP address, so no additional routing configuration is required on the target devices.
CONNECTIVITY
By default, IP Access connects the client to the Management LAN of the Opengear appliance, or the interfaces in the LAN zone for the OM Series (NGCS). A route for the directly attached subnet, plus any static routes configured on that interface (but never the default route) are also pushed automatically to the OpenVPN client.

23.04.0

Enabling Advanced Functionality

294

In the diagram, the client PC has a virtual tunnel interface with a route to the yellow management network, and the user can access any target IP devices on the yellow network using their real IP addresses.
The basic configuration of this feature is:
l Activate the IP Access NetOps module this starts the OpenVPN service in a Docker container on Lighthouse.
l Activate the IP Access NetOps module on each node you wish to use for IP Access this installs a remote connector service to allow the IP Access bridge to be created.
l Generate a certificate and export an associated OpenVPN client configuration file.
l Import the configuration into your preferred OpenVPN client.
The basic operation of this feature is:

23.04.0

Enabling Advanced Functionality

295

l Connect the tunnel this starts a connection to Lighthouse on UDP port 8194. l Authenticate when prompted using your Lighthouse credentials, appending the
node name to your Lighthouse username client certificate authentication is automatic, this is a second factor of authentication. l Wait a moment for the connection to complete this builds the GRE bridge between the client and pushes routes to the node's remote network(s). While connected, the client can access IP addresses on the node's remote network (s) LAN directly, for example, by using the ping command or by typing them into the browser address bar.
NODES SUPPORTED BY IP ACCESS
Opengear OM1200, OM2200, CM8100, ACM7000 and IM7200 nodes may be activated as IP Access nodes, to allow IP Access to their directly connected remote networks via Lighthouse. Other vendors/models are not currently supported. Select Configure > IP Access to view the available nodes in Lighthouse. The Node Access page displays.

23.04.0

Enabling Advanced Functionality

296

ENABLE IP ACCESS IN LIGHTHOUSE
This topic walks through the steps required to activate and enable the IP Access feature.

23.04.0

Enabling Advanced Functionality

297

ENABLE NETOPS AUTOMATION
After deploying the Lighthouse, sync the latest NetOps Modules from Docker Hub: 1. Log in to the Lighthouse web UI as a Lighthouse Administrator or the root user. 2. From the menu, select SETTINGS > Services > NetOps Modules. 3. Click the Synchronize icon.
Note: If Lighthouse cannot contact the Docker Hub, you may be able to use the offline installer.

23.04.0

Enabling Advanced Functionality

298

ACTIVATE THE IP ACCESS MODULE

NetOps Modules must be activated on Lighthouse and a per-node basis.

1. Log in to the Lighthouse web UI as root or a Lighthouse Administrator, and upload the Enterprise Edition or Enterprise Automation Edition licence file under SETTINGS > System > Subscriptions > Add.

2. Click CONFIGURE > NetOps Modules > Manage Modules and wait until Lighthouse activation is complete.

To activate on the node you wish to access IP networks via, use the following steps:

1. Ensure CONFIGURE > NetOps Modules > Manage Modules > IP Access > Always Activate is unchecked and applied.

2. Select CONFIGURE > Configuration Templating > Apply Templates.

3. Under NetOps Module Activation select IP Access and click Next.

4. Select the nodes to to activate and click Next.

5. To ensure the preflight check has succeeded click the table, then click Next.

Update icon above the

Note: Any locally attached subnet and any static routes configured on the Management LAN (OGCS) or interfaces in the LAN zone (NGCS) will get pushed to the client.

See also: "Activate a NetOps Module" on page 277.

23.04.0

Enabling Advanced Functionality

299

NETWORK PORTS USED FOR IP ACCESS
IP Access OpenVPN clients connect on UDP port 8194, inbound to Lighthouse. The remainder of the connection is bridged over the existing Lighthouse VPN between the node and Lighthouse, therefore no additional ports are utilized.

23.04.0

Enabling Advanced Functionality

300

GENERATE A CERTIFICATE AND EXPORT CLIENT CONFIGURATION
Clients connect to Lighthouse via an OpenVPN client, which in turn connects them to the Management LAN network of a particular node. IP Access provides a convenient means to configure the OpenVPN client by generating the configuration files that may be imported directly into your OpenVPN client of choice.
1. Log in to the Lighthouse web UI as root or a Lighthouse Administrator, and click CONFIGURE > IP Access > Client Certificates. Enter a Certificate Name and click Create.
2. When the certificate is created, download an associated OpenVPN client configuration by clicking Export.
Note: Deleting a client configuration file from Lighthouse revokes that client certificate and any associated client configurations using that certificate will no longer be permitted to connect.

23.04.0

Enabling Advanced Functionality

301

CONNECT THE VPN CLIENT
The final step is to establish the VPN connection that allows IP Access to the Management LAN (and optionally other networks) behind a node. 1. Import the client configuration from the previous step into your preferred
OpenVPN client and start the VPN connection. 2. When prompted to authenticate the VPN connection, you must also specify your
Lighthouse credentials and the node that you want to establish IP access via. 3. Specify the node by adding :node-name to your Lighthouse username, for
example, authenticating with the username james:my-acm7004-5 will authenticate as Lighthouse user james and connect the VPN to the IP network(s) behind my-acm7004-5.
Note: To be permitted connection, the Lighthouse user must have at least Node User rights for the specified node.
Note: The IP Access NetOps module creates a Layer 2 TAP mode tunnel which is not supported by Android or iOS operating systems.

23.04.0

Enabling Advanced Functionality

302

PASSWORD AUTHENTICATION DURING VPN CONNECTION
During VPN connection, the client is prompted to enter a username and password. These credentials are used to authenticate the user, and also to specify the remote node to establish IP access through.
Specify the node by adding :node-name to your Lighthouse username,for example, authenticating with the username james:my-acm7004-5 will authenticate as Lighthouse user james and connect the VPN to the IP network(s) behind myacm7004-5.
For authentication to succeed, the Lighthouse user must be one of:
l Lighthouse Administrator role, or root l Node Administrator role with access to the node you are connecting through l Node User role with access to the node you are connecting through

ADVANCED OPTIONS
The Advanced options of the IP Access page enable you to set a number of features, including setting expiry of certificates lifetime, changing default connection routes and enabling policies.
IP Access connects the client to the Management LAN or LAN zone by default, which is intended for deployments where the target devices are connected to those interfaces. If the Opengear appliances are deployed into a different or more complex network environment, then there are some advanced options that the Lighthouse administrator can use to control the IP Access connectivity, and these are described below.

23.04.0

Enabling Advanced Functionality

303

CONNECTING TO WAN ZONE
By default, IP access connects the client to the management LAN zone. If IP Access is required for the WAN zone, select Configure > IP ACCESS > Advanced Options > Push Wired WAN Routes. This is a global configuration, and will affect all node that are enabled for IP Access. In this case, the customer must have deployed Opengear appliances with the Network Interface (NET1) connected to the management network or facing target devices, and it results in IP Access connecting the client to the WAN (NET1) interface on OGCS.
Note: On NGCS this option connects the client to the WAN zone and any interfaces that belong to it, by default this is also NET1.

23.04.0

Enabling Advanced Functionality

304

NETWORK ACCESS POLICIES FOR OPERATIONS MANAGER
In a more complex deployment, Opengear appliances may be connected to multiple networks or virtual networks (VLANs), and in these cases it is often important to be able to control which of these networks each authenticated IP Access user is able to access.
This feature is only supported on Operations Manager or OM Series appliances, which support the NGCS zone-based firewall, designed to work with multiple VLANs and the optional built-in Ethernet switch with layer-3 capable ports. This flexibility and control is very useful, especially for customers who have a number of separate management networks (or VLANs) for different administrative teams.
The Network Access Policy mechanism on Lighthouse provides a way to dynamically map IP Access users, based on their group membership, to the firewall zone(s) that they can access on the Nodes. Each firewall zone is a collection of network interfaces which is configured on each Opengear appliance or Node. Firewall zones are used to provide policy abstraction by logical zone names the physical or virtual interfaces on each Node may vary by site, but the zone names must stay consistent. It is recommended that zones and names are planned out in advance of implementation.
A firewall zone is a collection of network interfaces which is configured on each Opengear appliance or Node in Lighthouse terminology. The Network Access Policy mechanism on Lighthouse provides a way to map users, based on their group membership, to the firewall zone(s) that they can access on the Nodes.

23.04.0

Enabling Advanced Functionality

305

UNDERSTANDING ACCESS POLICIES
Putting it all together, when a user authenticates to Lighthouse, they are mapped into one or more group(s), which map into firewall zone(s), which allow authenticated users to reach the appropriate network interfaces(s), including switch ports or VLANs, via IP Access.
For example, users who belong to the security group may get mapped into the secops (security operations) zone. On each OM appliance, the appropriate switch port(s) and/or VLAN(s) for security operations should be configured to be in the secops zone.
Similarly, users in the server group may get mapped into the serverops zone, and again on the OM appliances the appropriate interfaces can be configured to be part of that zone. The result is that members of the security group get IP Access to the networks in the secops zone, and members of the server group get IP Access to the networks in the serverops zone, for each Node that they connect to.

23.04.0

Enabling Advanced Functionality

306

SETTING UP NETWORK ACCESS POLICIES
To enable this feature, go to IP Access > Advanced Options and select "Network Access Policies for Operations Manager Enabled", then hit Apply.

23.04.0

Enabling Advanced Functionality

307

TO SET ACCESS POLICIES
A policy must be configured for each group whose members will use IP Access.
1. Select Configure > IP Access > Network Access Policies. The Network Access Policies page displays. The group to zone mapping column names ZONES is empty by default.

2. Click on the group name to edit the group policy. 3. Click on + Add Zone to add one or more firewall zones for this group. 4. Select the firewall zone and click Add.

23.04.0

Enabling Advanced Functionality

308

5. The Network Access Policies page now displays the group with the Firewall zone.
ACCESSING MULTIPLE VLANS OR PORTS
There are several ways a user can access multiple target networks, virtual networks (VLANs) or physical ports.

23.04.0

Enabling Advanced Functionality

309

GROUP MEMBERSHIPS
A user may belong to multiple groups, in which case they will have access to the sum of the zones mapped to those groups, in the same way port access works for Console Gateway and Smart Group matching. Note that this works regardless of Local or Remote user authentication on Lighthouse; user authorization (which determines access to Nodes and managed devices, and now firewall zones) is always derived from group membership.

23.04.0

Enabling Advanced Functionality

310

FIREWALL ZONES
In the IP Access Network Access Policy settings, each group can be configured to have access to one or more firewall zones. Some groups can be configured to have access to no zones, some to just one zone, and other groups to have access to multiple zones.

23.04.0

Enabling Advanced Functionality

311

MULTIPLE LAYER 3 NETWORK CONNECTIONS
On each Node a layer 3 network connection or "conn" is required on the OM to communicate with other hosts on a network or VLAN. Multiple conns on each OM can be mapped into the same firewall zone. This may be used to provide access to multiple switch ports, though it is perhaps more likely that those switch ports would be configured in a bridge group if they are all part of the same LAN, and the bridge group only requires a single layer 3 conn. If multiple LANs or virtual LANs (VLANs) are managed by the same team, then it may make sense to combine them into the same firewall zone.
Warning: The NGCS firewall will allow traffic to pass between interfaces in the same firewall zone, so to maintain security, multiple "separate" management VLANs should not be configured in the same zone, but should each have its own zone. If required, one of the mechanisms above can be used to allow user access to multiple zones and therefore to multiple "separate" VLANs.
TROUBLESHOOTING IP ACCESS
The most effective way to troubleshoot IP Access is to view the logs.

23.04.0

Enabling Advanced Functionality

312

VIEW THE DOCKER LOGS
run the following command on Lighthouse, either as root or with sudo (for non-root admins):

sudo docker logs -t central-sdi

The logs for the central-sdi Docker container, which controls client IP Access display.

2022-10-03T10:03:19.051579136Z INFO:root:[NetOps-SDI node="nodes-36" username="maverick"] VPN client authenticated 2022-10-03T10:03:19.094313762Z 2.29.37.12:65437 TLS: Username/Password authentication succeeded for username 'maverick123:OM1208-UK2' 2022-10-03T10:03:19.422971278Z 2.29.37.12:65437 Control Channel: TLSv1.3, cipher TLSv1.3 TLS_AES_256_GCM_SHA384, peer certificate: 2048 bit RSA, signature: RSA-SHA256 2022-10-03T10:03:19.422999989Z 2.29.37.12:65437 [LH5-UK3-22] Peer Connection Initiated with [AF_INET]2.29.37.12:65437 2022-10-03T10:03:22.000300953Z INFO:root:[NetOps-SDI node="nodes-36" username="maverick123"] VPN client connected with IP 172.31.0.8 netmask 255.255.0.0 2022-10-03T10:03:22.084275387Z LH5-UK3-22/2.29.37.12:65437 OPTIONS IMPORT: reading client specific options from: /tmp/openvpn_cc_ 3aa5d19c3ea09b3bbac56f6bacf7b6e.tmp 2022-10-03T10:03:22.084324213Z LH5-UK3-22/2.29.37.12:65437 Data Channel: using negotiated cipher 'AES-256-GCM' 2022-10-03T10:03:22.084332293Z LH5-UK3-22/2.29.37.12:65437 Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key 2022-10-03T10:03:22.084337215Z LH5-UK3-22/2.29.37.12:65437 Incoming

23.04.0

Enabling Advanced Functionality

313

Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key 2022-10-03T10:03:22.084342034Z LH5-UK3-22/2.29.37.12:65437 SENT CONTROL [LH5-UK3-22]: 'PUSH_REPLY,ping 10,ping-restart 120,route 192.168.2.0 255.255.255.0 172.31.0.1 1,ifconfig 172.31.0.8 255.255.0.0,peer-id 0,cipher AES-256-GCM' (status=1) 2022-10-03T10:03:22.084950386Z LH5-UK3-22/2.29.37.12:65437 PUSH: Received control message: 'PUSH_REQUEST' 2022-10-03T10:03:22.085204467Z LH5-UK3-22/2.29.37.12:65437 PUSH: Received control message: 'PUSH_REQUEST' 2022-10-03T10:03:22.085220316Z LH5-UK3-22/2.29.37.12:65437 PUSH: Received control message: 'PUSH_REQUEST' 2022-10-03T10:03:22.432350278Z LH5-UK3-22/2.29.37.12:65437 PUSH: Received control message: 'PUSH_REQUEST' 2022-10-03T10:03:23.120616769Z INFO:root:[NetOps-SDI node="nodes-36" username="maverick"] VPN client identified by MAC c6:87:ca:4a:3b:2c
Note the PUSH_REPLY line above shows that the IP Access client has been pushed the route to the network 192.168.2.0/24 which in this case is the interface on this Node in the firewall zone that the user was mapped into. (Unfortunately, the firewall zones are not listed in this log output). If there are errors with authentication, then they will show up here.

23.04.0

Enabling Advanced Functionality

314

USING THE ROUTING TABLE
When troubleshooting IP Access it is useful to look at the routing table on the target Node to make sure that routes to the target networks are installed. If the interface is down, for example, then the route is not present and will not be pushed to the client. The following commands can be used to display the routing table on the target OM Series Node:
route ip route
The Routing table displays:

root@OM1208-UK2:~# route

Kernel IP routing table

Destination Gateway Genmask Flags Metric Ref Use Iface

default _gateway 0.0.0.0 UG 110000001 0 0 net1

5.5.5.0 0.0.0.0 255.255.255.0 U 0 0 0 sw0p8

172.17.0.0 0.0.0.0 255.255.0.0 U 0 0 0 docker0

172.31.0.0 0.0.0.0 255.255.0.0 U 0 0 0 ipa-br0

192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 net2

192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 net1

192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 sw0p2

192.168.128.0 0.0.0.0 255.255.224.0 U 0 0 0 tun0

root@OM1208-UK2:~#

root@OM1208-UK2:~# ip route

default via 192.168.1.1 dev net1 proto static metric 110000001

5.5.5.0/24 dev sw0p8 proto kernel scope link src 5.5.5.5

172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1

linkdown

172.31.0.0/16 dev ipa-br0 proto kernel scope link src 172.31.0.1

192.168.0.0/24 dev net2 proto kernel scope link src 192.168.0.48

23.04.0

Enabling Advanced Functionality

315

192.168.1.0/24 dev net1 proto kernel scope link src 192.168.1.48 192.168.2.0/24 dev sw0p2 proto kernel scope link src 192.168.2.8 192.168.128.0/19 dev tun0 proto kernel scope link src 192.168.128.6 root@OM1208-UK2:~#
The ip route command output is useful as it shows the interface IP address of the OM, which should be reachable via IP Access as long as that interface is up. Other standard network troubleshooting techniques can be used from the Node, for example testing the ability to ping a target device, or using curl if it has an http or https interface. Examples
ping 192.168.2.4 curl -k https://192.168.2.4/

SECURE PROVISIONING

Secure Provisioning for NetOps is a configuration storage, distribution and provisioning system. It does not generate, test or validate device configuration. Instead, it is focused on provisioning remote managed devices with user-supplied configuration and device OS images automatically, remotely and securely, no matter where those devices are and no matter what the state of the network is.

Using Secure Provisioning for NetOps, network turn up no longer requires network engineering staff to perform initial configuration tasks on site, even when there is no existing LAN or WAN in place. Remote hands rack, stack and cable the infrastructure, then Secure Provisioning for NetOps Automation automates the rest of the turn up process.

The Secure Provisioning module leverages these technologies:

23.04.0

Enabling Advanced Functionality

316

l ZTP (Zero Touch Provisioning): The process by which managed devices in their unconfigured state request and are delivered initial setup resources over the local management network
l Human-readable YAML language: Provides simplified configuration of managed device ZTP configuration parameters
l Git source control: Managed Device resources such as initial configuration files and OS images are automatically stored in a versioned, auditable repository
l Ansible automation framework: Automatically propagates device resources and configures on-site ZTP services
The Secure Provisioning module combines a centrally orchestrated, vendor-neutral ZTP service with on-site node LAN and WAN connectivity, to automate the provisioning process end to end.
SECURE PROVISIONING CONFIGURATION MANAGEMENT
Secure Provisioning always applies device configuration in its entirety and does not support applying config patches or deltas to a provisioned device (for example, adding a few lines to running config, to enable a specific feature).
STATELESS FILE MANAGEMENT
Secure Provisioning supports a DevOps-style approach which collapses initial provisioning, disaster recovery and ongoing maintenance workflows into the one workflow:

23.04.0

Enabling Advanced Functionality

317

Using this approach, the config patch is applied in Lighthouse to the central configuration template via git, which renders the configuration file in its entirety and pushes to the OM node. The device is factory reset and pulls the new configuration as if it were being provisioned for the first time. Pros: l Eliminates config drift l Enforces config reproducibility l Central audit trail of all configuration changes l Disaster recovery becomes as simple as resetting all devices to reprovision Cons: l Requires a longer maintenance window as the device is reset and reboots l Patches cannot be applied to running configuration
STATEFUL DEVICE MANAGEMENT GATEWAY
The NetOps Automation platform provides a management fabric from remote devices to your central management network via Lighthouse VPN and/or the cellular WWAN. There are many tools and protocols purpose-built for stateful configuration management, such as Cisco NSO and SolarWinds NCM, and NETCONF and gRPC (OpenConfig). NetOps can be leveraged by these tools as a secure, resilient management path both extending their reach to the out-of-band management network, and ensuring reachability during outages.

23.04.0

Enabling Advanced Functionality

318

HOW SECURE PROVISIONING WORKS
The Secure Provisioning feature centrally orchestrates the distribution of managed device configuration files and firmware images, and the node provisioning (ZTP) services required to deliver the files to managed devices.
Secure Provisioning is configured by defining the resources to provision managed devices with, and defining how these resources should be distributed around your network.
l Device Resource Bundles contain the files needed to provision one or many managed devices: l Configuration File, Script File and/or Image Files. l Each Resource Bundle has a defined Device Type. l When a Resource Bundle is distributed to a node, any ZTP request matching the Device Type are provisioned with the bundled resources. l This may be restricted to specific devices by specifying one or more device MAC Addresses (range and reverse match supported) or Serial Numbers (not supported by all vendors).
l Resource Distribution policies are defined by Node Inventory Lists: l A Static Node Inventory List - a predefined, static list of nodes to distribute to l A Dynamic Node Inventory List - evaluates a Smart Group each time resources are distributed.

23.04.0

Enabling Advanced Functionality

319

Note: The Dynamic Node Inventory List allows you automatically tag certain nodes with Enrollment Bundles, for example, by region or site class, to help automate resource distribution to newly enrolled nodes in that region.
Device Resource Bundle and Resource Distribution configuration are supplied to Lighthouse using the web UI or CLI (git) method. The Web UI configuration method creates an underlying YAML configuration the same as created using the git method, it is effectively a front end to the git method.
A git push to the Lighthouse repository or clicking the UI Push Now/Push Resources button triggers a resource push:
l A git post-commit hook triggers an Ansible playbook on Lighthouse. l The playbook copies resources down to nodes, securely over Lighthouse VPN. l The playbook start or restarts ZTP services on nodes.

SUPPORT FOR SECURE PROVISIONING
Opengear OM2200 and OM1200 nodes may be activated as Secure Provisioning nodes. Opengear ACM7000 or IM7200 nodes may also be activated as provisioning nodes, however not all features are available and there are some caveats to be aware of. Features that are not available of ACM7000/IM7200 nodes: l Secure boot and physical tamper resistance. l Encryption of device resource files at rest. l Centralized ZTP status logging. l Device configuration templating.

23.04.0

Enabling Advanced Functionality

320

l Ordered provisioning. l Post-provisioning scripts. Other ACM7000/IM7200 caveats: l Secure Provisioning takes control of node DHCP, NTP, DNS services and
overwrites system configuration. l Secure Provisioning overwrites node Management LAN configuration.

VENDOR MANAGED DEVICES SUPPORTED BY SECURE PROVISIONING

Secure Provisioning is vendor-neutral, with support for a broad range of network devices from multiple vendors.

The ZTP process used to provision devices is not standardized, and each vendor OS implements ZTP differently for example, using differing DHCP options, or requiring an intermediary script to load files.

With Secure Provisioning, you upload configuration and/or firmware image files to create Resource Bundles, then select the vendor profile for that Resource Bundle. This automatically generates the vendor-appropriate ZTP configuration, simplifying the delivery of resources to target devices.

Secure Provisioning currently has built-in support for provisioning devices from these vendors:

l Cisco (IOS, IOS XR, IOS XE, NX-OS)

l Juniper

l Arista

l HPE/Aruba

l Huawei

23.04.0

Enabling Advanced Functionality

321

l Cumulus l Pica8 l Opengear Advanced users may add support for additional devices using custom DHCP configuration.
LOCAL NETWORK SERVICES PROVIDED BY NODES
In addition to zero touch provisioning (ZTP) services, the local node runs local services required to act as a bootstrap management LAN and secure WAN for managed devices, from day zero onwards. When responding to a BOOTP/DHCP provisioning request from a device, the Operations Manager node hands out its own local address as:

23.04.0

Enabling Advanced Functionality

322

DEFAULT GATEWAY
Devices trying to reach to destinations on the central LAN that Lighthouse resides on are securely routed over Lighthouse VPN. This allows devices to reach, for example, central NMS for monitoring, and central configuration systems for final service provisioning.
Requests to other remote destinations are masqueraded behind and routed out the node's built-in cellular WWAN, allowing devices to reach cloud provisioning services.
Note that device requests are masqueraded to Lighthouse's central IP and will appear to be originating from Lighthouse to hosts on the central LAN.
All traffic between remote node network and the central Lighthouse network is securely tunneled inside Lighthouse VPN.

23.04.0

Enabling Advanced Functionality

323

DNS SERVER
DNS lookups from devices are securely proxied through Lighthouse VPN to the central DNS server(s) used by Lighthouse, allowing devices to resolve central hosts from day one.

23.04.0

Enabling Advanced Functionality

324

NTP SERVER
The NTP Server allows devices to set accurate time on first boot, for example, for certificate verification and generation. By default, the node's NTP service uses its local hardware clock as time source.

23.04.0

Enabling Advanced Functionality

325

SYSLOG SERVER
The Syslog Server relays messages to a central LogZilla instance (this is an optional extra module). This allows log collection from day zero, and analysis of the device ZTP process itself.
SECURE PROVISIONING CONFIGURATION
All system configuration is performed via Lighthouse. The configuration necessary to provision a device consists two elements. The basic steps to configure Secure Provisioning are: l Create Device Resource Bundles and upload resource files (for example,
configuration files or scripts, firmware images) to Lighthouse. l Define Node Inventories to distribute the resources to specific nodes, where they
will become available for devices to request for provisioning.

23.04.0

Enabling Advanced Functionality

326

DEVICE RESOURCE BUNDLE
A Device Resource Bundle contains the resource files, such as, a configuration file and OS upgrade image, that are loaded via ZTP (DHCP + TFTP/HTTP) onto the managed device. This may be a full, final configuration, or a baseline configuration to allow the managed device to become managed by an upstream configuration service.
As each vendor's ZTP process is slightly different, Device Resource Bundles allow you to select the Device Type. This generates the appropriate ZTP server configuration (DHCP options), any necessary intermediary provisioning scripts and enables device-specific ZTP features, such as serial number matching.
By default, Device Resource Bundles are targeted to all managed devices of the selected Device Type. Bundles may be targeted to specific managed devices by specifying one or more device MAC addresses (including range and reverse match), or in some case by specifying one or more device serial numbers.

23.04.0

Enabling Advanced Functionality

327

NODE INVENTORY
A Node Inventory is a static or dynamic list of nodes and a corresponding list of Device Resource Bundles. This defines how Device Resource Bundles are distributed around your network. Resource Bundles may be distributed using one of two methods: l Push to a static list of nodes, selected individually by node ID l Push to a dynamic list of nodes, linked to a Lighthouse Smart Group of nodes
Note: You may combine distribution methods.
Topic continued on next page:

23.04.0

Enabling Advanced Functionality

328

CREATE DEVICE CONfiGURATION
To provision a managed device, you must supply device resources. Device resources consist of an initial configuration file for the device to install, and optionally a operating system image for the device to upgrade itself with.
Device resource file formats are specific to the target vendor. Secure Provisioning for NetOps Automation provisions these files, but does not generate them.
For example, a trivial Arista initial configuration file may look like:
demo_arista.cfg

A trivial Cisco IOS XR initial configuration may look like:

23.04.0

Enabling Advanced Functionality

329

Cisco IOS XR initial configuration:

23.04.0

Enabling Advanced Functionality

330

ACTIVATE THE SECURE PROVISIONING MODULE ON LIGHTHOUSE
The Secure Provisioning license is installed on Lighthouse and contains a preset number of available node activations. Each node activated for Secure Provisioning consumes an available activation; Lighthouse itself does not consume an activation.
Installing the Secure Provisioning license automatically activates Secure Provisioning on Lighthouse, at which point the NetOps Automation platform installs the central Secure Provisioning software components on Lighthouse.
1. Install the Enterprise Automation Edition license under SETTINGS > System > Subscriptions.
2. Install an applicable legacy license, or, apply an Automation Edition subscription, to enable Secure Provisioning under SETTINGS > System > Subscriptions. l It will take a few minutes for the Secure Provisioning to activate on Lighthouse, view progress under CONFIGURE > NetOps Modules > Manage Modules.
3. Click the Update icon and note new menu items are now available under CONFIGURE > Secure Provisioning.
Secure Provisioning may now be selectively activated on nodes automatically as they enroll, or activated on nodes manually after enrollment.

23.04.0

Enabling Advanced Functionality

331

INSTALL THE NODE
1. Connect the NET1 Ethernet to a network port via which node can reach the Lighthouse VM Connect power to the node.
2. By default, the node requests a DHCP address and has a static address of 192.168.0.1/24.
3. Test you can reach the node address via ping, SSH and HTTPS, and note this address for the following step.

23.04.0

Enabling Advanced Functionality

332

CONFIGURE A PER-NODE MODULE ACTIVATION POLICY
The process of automatically or manually activating Secure Provisioning on a node prepares it to become a Secure Provisioning server, securely over Lighthouse VPN.
Activating a node for Secure Provisioning consumes an activation from the license. Deactivation returns the activation to the available pool. To deactivate and remove a NetOps Module from a given node, see "Deactivate (remove) a NetOps Module" on page 283.
Note: Operations Manager activation deploys the Secure Provisioning container to the node, which may take several minutes.

23.04.0

Enabling Advanced Functionality

333

OPTION A. AUTOMATICALLY ACTIVATE ALL NODES UPON ENROLLMENT
This is the default policy. When a license is present and activations are available, all nodes are activated for Secure Provisioning as they enroll. Nodes that have been previously enrolled must be manually activated.
1. Ensure CONFIGURE > NetOps Modules > Manage Modules > Secure Provisioning > Always Activate is checked and applied.
2. To activate a node, enroll it into Lighthouse.

23.04.0

Enabling Advanced Functionality

334

OPTION B. AUTOMATICALLY ACTIVATE SELECT NODES UPON ENROLLMENT
You may selectively activate Secure Provisioning on a subset of nodes using Enrollment Bundles. Only nodes enrolling using one of these bundles will be automatically activated.
1. Uncheck CONFIGURE > NetOps Modules > Manage Modules > Secure Provisioning > Always Activate and click Apply.
2. Select CONFIGURE > Node Enrollment > Enrollment Bundles and add a new bundle (you may also edit an existing bundle) Enter a bundle Name and Token, and choose whether or not to Auto-Approve enrollment.
3. Scroll down to NetOps Modules and add Secure Provisioning then Apply. 4. When enrolling the node to Lighthouse, specify the Enrollment Bundle Name
and Token.
Note: Lighthouse-initiated manual enrollment (i.e. clicking the Add Node button in the Lighthouse web UI) does not support bundles, you must use a nodeinitiated enrollment method.

23.04.0

Enabling Advanced Functionality

335

OPTION C. MANUALLY ACTIVATE NODES AFTER ENROLLMENT

1. Select CONFIGURE > Configuration Templating > Apply Templates.

2. Under NetOps Module Activation, select Secure Provisioning and click Next. Select the nodes to to activate and click Next.

3. To ensure the preflight check has succeeded click the table, then click Next.

Update icon above the

4. Click the Update icon, to ensure activation is successful.

23.04.0

Enabling Advanced Functionality

336

ENROLL THE NODE INTO LIGHTHOUSE
1. Launch an HTTPS browser session to Lighthouse. 2. Login using root and the secure password set earlier.
Note: You may also login as a Lighthouse Administrator user, if you have configured one.
3. At the top of the UI, click Add Node. 4. Select An Opengear appliance, the second option in the Product dropdown list. 5. Enter the Operations Manager's Network Address, Username (root) and
Password (default) Check Auto-approve node then Apply. 6. From menu, select CONFIGURE -> Node Enrollment -> Enrolled Nodes then
click the Update icon to check enrollment has completed.
7. If you are using the Automatically activate select nodes upon enrollment policy, you must manually activate the node after enrollment.
The node now has a secure Lighthouse VPN (OpenVPN) tunnel back to Lighthouse, over which all communications are now secured.

23.04.0

Enabling Advanced Functionality

337

CONNECT TARGET DEVICE
Secure Provisioning currently supports provisioning devices from these vendors: l Cisco l Juniper l Arista l HPE/Aruba l Huawei l Cumulus l Pica8 l Opengear
Note: Additional devices may be supported using custom DHCP configuration. To request built-in support for additional devices, contact customer support.

23.04.0

Enabling Advanced Functionality

338

PROCEDURE
1. Connect a supported managed device's management NIC directly to the node. 2. If the node has a built-in Ethernet switch, connect the device to any switch port. 3. Otherwise, connect the device directly to the node's NET2 Ethernet, or via an
intermediary management switch. 4. Power on the managed device. 5. Ensure the managed device is in ZTP mode, this typically requires the device to
have its configuration erased/reset to factory defaults.
UI-BASED WORKFLOW
Each NetOps Module provides a simple web UI for configuration and status monitoring. This UI is designed primarily for manual operation, evaluation and testing. For comprehensive automation, refer to the CLI-based workflow section that follows. It may be useful to familiarize yourself with the system using the UI before adopting a CLI-based workflow.
Note: Changes pushed to nodes via the Lighthouse UI or API will override those made by direct repository access, therefore UI- based or CLI-based workflows should be considered mutually exclusive modes of operation.

23.04.0

Enabling Advanced Functionality

339

UI WORKflOW
Launch an HTTPS browser session to Lighthouse Login using root and the secure password set earlier.
Note: You may also login as a Lighthouse Administrator user, if you have one configured

23.04.0

Enabling Advanced Functionality

340

CREATE DEVICE RESOURCE BUNDLE
1. In the menu, navigate to CONFIGURE > Secure Provisioning > Device Resources.

23.04.0

Enabling Advanced Functionality

341

2. Click the Add (+) button. The Modify Device Resource page opens.

23.04.0

Enabling Advanced Functionality

342

3. Choose a Name to identify this bundle, for example, demo_bundle1. 4. Select the Device Type corresponding to a target managed device.
Note: Each device type may display different resource fields documented below, this is dependent on the device-specific ZTP featureset
5. The Configuration File is the initial configuration file for the device to load via ZTP. Select a previously uploaded file or click the Browse button to upload a new file.
6. The Image File is the initial software image for the device loaded via ZTP. Select a previously uploaded Image File or click the Browse button to upload a new file.
7. Optionally, target this bundle at devices matching the specified MAC Addresses, click the Add and Remove buttons when specifying multiples.
Note: Each MAC address is specified in full, using a wildcard (for example, 00:10:FA:C2:BF:*), or negated to exclude from the match (for example, !01:23:45:67:89:AB)
8. Optionally, target this bundle at devices matching specified Serial Numbers, click the Add and Remove icons when specifying multiples.
9. Click Save.

23.04.0

Enabling Advanced Functionality

343

DEfiNE RESOURCE DISTRIBUTION
See the Node Inventory section earlier in this document for an overview of available distribution methods.

23.04.0

Enabling Advanced Functionality

344

DEFINE A STATIC NODE INVENTORY
1. Navigate to CONFIGURE > Secure Provisioning > Resource Distribution. 2. Under Static Node Inventory List click the Add + button. The New Node
Inventory window opens, displaying inventory details. 3. Choose, and enter a Name to identify this bundle, for example, branchinventory_ 4. From the Resource Distribution list, select the bundles to distribute.

5. Select the Nodes to which these bundles are to be distributed.
Note: The Free Text Search and Smart Group filter options are to help locate nodes for inclusion in the static inventory, these filters are not applied dynamically to the inventory going forward.
6. Click Apply.

23.04.0

Enabling Advanced Functionality

345

DEFINE A DYNAMIC NODE INVENTORY
1. Create a Lighthouse Smart Group, as documented in the Creating Smart Groups topic in the Lighthouse User Guide.
2. In the Lighthouse UI, navigate to CONFIGURE > Secure Provisioning > Resource Distribution.
3. Under Dynamic Node Inventory List click the Add + button. The Modify Node Inventory window opens, displaying inventory details.
4. Choose, and enter a Name to identify this bundle, for example, LabInventory_ 5. Select the Smart Group to link to this inventory,
Note: this Smart Group search is dynamically evaluated to a list of nodes each time resources are pushed.
6. Select the bundles to distribute, listed in the Resource Distribution table.
7. Click Apply.
Note: Changes to resource bundle or distribution configuration are not applied to nodes immediately, they must be explicitly pushed to nodes.

23.04.0

Enabling Advanced Functionality

346

PUSH RESOURCES
Any changes to the resource bundle or distribution configuration made in the previous steps are not applied to nodes immediately, they must be explicitly pushed to nodes.
When changes are detected, a Push now button is displayed above the Secure Provisioning UI pages.

Resources may always be resynchronized by clicking CONFIGURE > Secure Provisioning > Resource Distribution > Push Resources. The push operation distributes resource bundles as configured, then as needed restarts DHCP services on remote nodes. Push status is displayed above the Secure Provisioning UI pages. You may also monitor the syslog output on Lighthouse for low-level output from the Ansible playbook.
CLI BASED WORKFLOW
Advanced automation users may choose to manage device resources and resource distribution with direct access to the central file repository on Lighthouse.

23.04.0

Enabling Advanced Functionality

347

All necessary resource and configuration files are uploaded to Lighthouse using the Secure Copy protocol such as scp, WinScp or similar - or advanced users may prefer to use git directly.
If you have adopted DevOps-style configuration management using your own source repository (such as git, Mercurial or Subversion) and/or configuration deployment using continuous integration (such as Jenkins or GitLab), this interface also provides a convenient way to hook the Opengear system into these tools and workflows. For example, a configuration commit in the upstream system could automatically proliferate to the Lighthouse file repository, and then in turn to the downstream nodes.
Note that changes pushed to nodes via the Lighthouse UI or API will override those made by direct repository access, therefore UI- based or CLI-based workflows should be considered mutually exclusive modes of operation.

23.04.0

Enabling Advanced Functionality

348

CREATE CONFIGURATION YAML
The first step is to assign resource files to specific device types (collectively known as device resources), and to assign device resources to be deployed to specific nodes.
Note: The web UI provides a convenient way to start provisioning managed devices without needing to be fully familiar with YAML or git. The generated YAML files that controls resource bundling and distributions is located on Lighthouse, inside the central-dop container. You can view it by running the following command: sudo docker exec -it central-dop cat /srv/centralui/root/config.yml | less
Use a YAML file to bundle device resources, and control the distribution of device resources from Lighthouse to the nodes. PROCEDURE 1. Create a new directory or folder of your choosing, for example: nom-prov 2. Inside the nom-prov directory, create a new directory or folder called: downloads. 3. In the nom-prov directory, create a file with the .yml or.yaml extension, using the
following format: nom-prov.yml
device_resources: demo_arista: device_type: arista config_file: 'demo_arista.cfg' image_file: 'arista_eos.swi'

node_inventory:

23.04.0

Enabling Advanced Functionality

349

MyNodes: static: - nodes-1

deployment: MyNodes: - demo_arista

Note: Note that indentation is meaningful in YAML, and you must use space characters not tabs to indent.
The device_resources list groups and assigns resource files to particular device types (i.e. resource bundles). 4. Choose an identifier for each resource bundle item, for example:. demo_arista. 5. For each item, you must provide the device_type, as well as well as one or more
resources, ie. config_file or image_file. l device_type matches this device resource item to all devices from the specified
vendor it may be one of the folowing: Cisco, Cisco_xe, Cisco_xr, Cisco_nx, Juniper, Arista, Aruba, Huawei, Cumulus, Pica, Opengear. l config_file is the initial configuration file for the device to load via ZTP, as present in the downloads directory. l image_file is the initial software image for the device to load via ZTP, as present int he downloads directory.
Note: HPE/Aruba devices do not support the image upgrade via ZTP.

The Cisco Autoinstall process does not support image upgrade via

23.04.0

Enabling Advanced Functionality

350

ZTP, to automate image upgrade you must supply a TCL script file rather than a configuration file.
l mac_address optionally target this bundle at the listed MAC address(es), which may be specified in full, using a wildcard (for example, 00:10:FA:C2:BF:*), or negated to exclude from the match (for example, !01:23:45:67:89:AB)
l serial_number optionally target this bundle at the listed serial number(s) Device resource items are then assigned to nodes using the deployment and optionally the node_inventory lists. See Node Inventory for an overview of available distribution methods. The node_inventory list defines groups of nodes. Choose an identifier for each inventory, for example:. branchinventory_ or labinventory_

23.04.0

Enabling Advanced Functionality

351

DEFINE A STATIC INVENTORY:
1. Create a list named static. 2. List nodes by node ID, for example, nodes-1. 3. You can view node IDs by running the following command on Lighthouse: node-
info --all

23.04.0

Enabling Advanced Functionality

352

DEfiNE A DYNAMIC INVENTORY:
1. Create a Lighthouse Smart Group, as documented in the Creating Smart Groups section of the Lighthouse User Guide.
2. Create a key named smartgroup with a value of the Smart Group name, this Smart Group search is dynamically evaluated to a list of nodes each time resources are pushed
The deployment list assigns device resources to the node inventories defined above, or all nodes.
l Deployment identifiers correspond to node_inventory identifiers, for example, branchinventory_ .
l Assign device resources by listing device resource items, for example, demo_ arista.
l You may have multiple device resources per deployment.

23.04.0

Enabling Advanced Functionality

353

A more comprehensive YAML file may look like: more-devices.yml
device_resources: access_switch: device_type: juniper config_file: 'jn-switch35.config' image_file: 'jinstall-ex-4200-13.2R1.1-domestic-signed.tgz' mac_address: - '00:00:0c:15:c0:*' - '!00:00:0c:15:c0:99' branch_router: serial_number: - 'SAD15300D4W' - 'FOC1749N1BD' - 'AVJ18163A52' config_file: 'branch_xr.cfg' device_type: cisco_xr demo_arista: device_type: arista config_file: 'demo_arista.cfg' image_file: 'arista_eos.swi'

node_inventory:

branch_inventory:

static:

- nodes-1

- nodes-2

- nodes-10

lab_inventory:

23.04.0

Enabling Advanced Functionality

354

smartgroup: LabNodes
deployment: lab_inventory: - demo_arista - access_switch branch_inventory: - branch_router - access_switch

23.04.0

Enabling Advanced Functionality

355

HOW UI FIELDS CORRESPOND TO THE YAML FILE (EXAMPLE)
The following example YAML file contains line-by-line comments (blue text) denoting the UI page or field above each corresponding YAML element:
# CONFIGURE NODES > Secure Provisioning > Device Resources device_resources:
# Device Resource Details > Name access_switch:
# Device Resource Details > Device Type device_type: juniper # Device Resource Details > Configuration File config_file: 'jn-switch35.config' # Device Resource Details > Image File image_file: 'jinstall-ex-4200-13.2R1.1-domestic-signed.tgz' # Device Resource Details > MAC Addresses mac_address: - '00:00:0c:15:c0:*' - '!00:00:0c:15:c0:99' # Device Resource Details > Provision After provision_after: - branch_router

# Device Resource Details > Name

branch_router:

# Device Resource Details > Device Type

device_type: cisco_xr

# Device Resource Details > Serial Numbers

serial_number:

- 'SAD15300D4W'

23.04.0

Enabling Advanced Functionality

356

- 'FOC1749N1BD' - 'AVJ18163A52' # Device Resource Details > Configuration File config_file: 'branch_xr.cfg'

# Device Resource Details > Name demo_arista: # Device Resource Details > Device Type device_type: arista # Device Resource Details > Configuration File config_file: 'demo_arista.cfg.j2' # Device Resource Details > Image File image_file: 'arista_eos.swi' # Device Resource Details > Post-Provisioning Script post_provision_script: arista_fixups_over_ssh.py post_provision_script_timeout: 900
# CONFIGURE NODES > Secure Provisioning > Resource Distribution node_inventory:
# Static Node Inventory List > Inventory Details > Name BranchInventory:
# Inventory Details > Select Nodes static: - nodes-1 - nodes-2 - nodes-10

# Dynamic Node Inventory List > Inventory Details > Name LabInventory:
# Inventory Details > Smart Group

23.04.0

Enabling Advanced Functionality

357

smartgroup: LabNodes
# CONFIGURE NODES > Secure Provisioning > Resource Distribution (mostly!) deployment:
# CONFIGURE NODES > Secure Provisioning > Resource Distribution Inventory Details > Resource Push
LabInventory: - demo_arista - branch_router - access_switch # CONFIGURE NODES > Secure Provisioning > Resource Distribution > Inventory Details > Resource Distribution BranchInventory: - branch_router - access_switch

23.04.0

Enabling Advanced Functionality

358

UPLOAD CONfiGURATION AND RESOURCES
1. Assemble device resources on your PC or laptop in preparation for upload. 2. Locate the nom-prov directory created in the previous section 3. Copy device resources into nom-prov/downloads. Your locally assembled files will now look similar to that below:
. nom-prov
nom-prov.yml downloads
arista_eos.swi demo_arista.cfg
You must now choose how you will upload files to the central Secure Provisioning repository, using Secure Copy or git.

23.04.0

Enabling Advanced Functionality

359

OPTION A. SECURE COPY METHOD
Secure copy the entire nom-prov directory to Lighthouse port 2222, to the /srv/central-auto/ directory and authenticating as root, for example, using the scp command:
cd nom-prov scp -P 2222 -rp ./* root@192.168.0.1:/srv/central-auto/
.. where 192.168.0.1 is the IP address of Lighthouse. Secure Provisioning now automatically propagates the device resources to the nodes specified by the YAML, it automatically configures and starts or restarts ZTP services on the nodes. At this point, target device will begin the ZTP process and become provisioned.

23.04.0

Enabling Advanced Functionality

360

OPTION B. GIT METHOD
Advanced users may choose to access the Secure Provisioning git repository on Lighthouse directly, rather than using scp. This has the advantage of supporting commit messages and integrate with upstream git or other continuous integration systems. Example commands to initialize the repository for the first time:
ssh-copy-id root@192.168.0.1 cd nom-prov git init git remote add origin ssh://root@192.168.0.1:2222/srv/central git add -A git commit -a -m "Initial commit of ZTP resources" git push origin master
.. where 192.168.0.1 is the IP address of Lighthouse. Once the repository has been initialized, subsequent users can operate on it using the clone command:
ssh-copy-id root@192.168.0.1 git clone ssh://root@192.168.0.1:2222/srv/central nom-prov cd nom-prov echo >> nom-prov.yml git commit -a -m "Whitespace change for testing, please ignore" git push origin master
.. where 192.168.0.1 is the IP address of Lighthouse.

23.04.0

Enabling Advanced Functionality

361

ADDITIONAL RESOURCE FILES AND DEVICE TYPE FILES
You may also provide additional resource files that are not explicitly part of Device Resource Bundles, for example, final configuration files that may be conditionally fetched and applied by the device's primary ZTP script.
You may also extend Secure Provisioning to support additional device types by providing ISC DHCP configuration snippets, for example:
new-vendor.conf

class "new-vendor-class" { match if (option vendor-class-identifier = "new-vendor"; option bootfile-name "new-vendor.cfg";
}

Additional files must be placed in the subdirectory named after the Node Inventory they will be deployed to. Within this subdirectory, files must be placed in the following:
l Resource files such as device configuration or image files are placed in the downloads directory.
l Advanced: DHCP snippets may be placed in the dhcpd directory.
Directly added files are pushed together with YAML-generated files to the nodes. An example local directory structure is shown below with a YAML config file from the earlier example, as well as manual new-vendor files added to the my_inventory directory:

nom-prov

nom-prov.yml

downloads

23.04.0

Enabling Advanced Functionality

362

demo_arista.cfg cumulus_interfaces cumulus_setup.sh arista_eos.swi my_inventory
downloads new-vendor.cfg dhcpd
new-vendor.conf
The files are uploaded to the central Secure Provisioning repository, using Secure Copy or git, in the same way as the earlier example.
CONFIGURE DEVICE RESOURCES VIA ZTP
There are two factors that determine which resources are delivered to which devices via ZTP:

23.04.0

Enabling Advanced Functionality

363

DEVICE RESOURCE BUNDLE MATCHING
As well as containing resource files themselves, each Resource Bundle itself has a few extra parameters: device vendor, device MAC address(es) and device serial number(s) (not supported by all vendors). Of these, only the device vendor is mandatory.
When a managed device broadcasts a BOOTP/DHCP request to initiate ZTP, it advertises its vendor ID string, MAC address, and in some cases serial number. These values are compared to the values in each Resource Bundle contained on the local node.
If there's a match, the local node provisions the device with the resource files in the matching bundle.

23.04.0

Enabling Advanced Functionality

364

RESOURCE DISTRIBUTION
Node Inventories are used to selectively control which Resource Bundles are pushed to which nodes. A node will only respond to a BOOTP/DHCP request on its local network if a matched Resource Bundle has been pushed to it. Note that resources are not distributed any nodes by default.

23.04.0

Enabling Advanced Functionality

365

BASELINE VS FINAL DEVICE CONFIGURATION
Broadly speaking, there are two approaches to secure provisioning using ZTP.
You may use strict matching and distribution settings to provision specific devices with unique, final configurations.
Alternatively, you may use laxer matching and wider distribution settings to provision many devices with a baseline configuration, for example, "just enough configuration" to route to a central production configuration system for final configuration and service provisioning.
You may also combine the two approaches, for example, use a reverse MAC address match to opt a specific device or devices out of an otherwise general, baseline configuration.

RUN A SCRIPT ON A NEWLY PROVISIONED DEVICE

Note: Post-provisioning scripting is an advanced feature only supported by Operations Manager nodes.

It is possible to upload a script and associated with a device Resource Bundle, to be run by remote Operations Manager node once a Managed Device is considered provisioned. A device is considered to be in a provisioned state once has downloaded all of the files in the Resource Bundle it is being provisioned with.
The script may be uploaded and associated via the UI during Resource Bundle creation using the Post-Provisioning Script option, or via git/scp and the "CLI based WorkFLow" on page 347.
Scripts may be implemented in bash, Python 2 or Python 3, and must start with a shebang i.e. the first line must be one of:

23.04.0

Enabling Advanced Functionality

366

#!/bin/bash
#!/usr/bin/env python2
#!/usr/bin/env python3
l Scripts are run in a monitored background processes in the Secure Provisioning container (remote-dop) on the node.
l Scripts have a default 15 minute timeout, this can be manually configured in the YAML config (post_provision_script_timeout).
l Scripts may login to target device via the network using SSH key auth where nom_remote_ssh_pub_key has been injected into the device config, or using username/password with the sshpass command.

MONITOR THE ZTP PROGRESS OF A MANAGED DEVICE
The current provisioning state of managed devices can be monitored via syslog on the Operations Manager (local devices only) or Lighthouse (all devices).
Each Secure Provisioning syslog message contains a prefix identifying the MAC address of the device being provisioned, similar to: [NetOps-DOP device="01:23:45:67:89:AB"]
Sample messages showing an Opengear ACM7004 device being provisioned:

23.04.0

Enabling Advanced Functionality

367

[NetOps-DOP device="00:13:C6:EF:00:08"] Received DHCP request from device with vendor ID Opengear/ACM7004-5-LMR [NetOps-DOP device="00:13:C6:EF:00:08"] Assigned DHCP address of 10.0.0.2 to device [NetOps-DOP device="00:13:C6:EF:00:08"] Provisioning device with resource bundle my\_acm7004 [NetOps-DOP device="00:13:C6:EF:00:08"] Device retrieved resource file /files/acm7004-5-4.3.1.flash via HTTP/HTTPS
Syslog can be viewed from the CLI by running:
tail -F /var/log/messages | grep NetOps-DOP

WAN GATEWAY SERVICES
In addition to LAN provisioning, the node can utilize its built-in cellular connection to act as a WAN gateway and provide a proxy to essential services for devices on day one. The node's DHCP server hands out the node's address as: l NTP server
l This is a local service, synced to the node's system clock l DNS server
l DNS lookups by devices are relayed via Lighthouse VPN, to the DNS server that Lighthouse is configured to use
l Syslog server

23.04.0

Enabling Advanced Functionality

368

l Note that incoming syslog messages are dropped unless LogZilla for NetOps Automation has been activated
l Default gateway l When the node is configured in cellular router mode (i.e. with forwarding and masquerading enabled), devices can route to external services, for example, to enroll with third-party management systems for additional configuration.
ADVANCED OPTIONS

23.04.0

Enabling Advanced Functionality

369

USING VARIABLES IN CONFIGURATION FILE TEMPLATES
In addition to static files, you may create templated ZTP configuration or script files. This is useful if your file needs to reference site- specific values such as an assigned IP addresses. Any file uploaded via the web UI, or into the downloads directly with a file suffix of .j2 (Jinja2) will be automatically templated. The .j2 suffix is stripped when serving templated files to devices. Available variables: l {{ nom_remote_server }}
l Address of provisioning interface on the node l Example: 10.0.0.1 l {{ nom_remote_interface }} l Name of provisioning interface on the node l Example: net2 l {{ nom_remote_netmask }} l Netmask of provisioning interface on the node (and netmask assigned in
DHCP offers) l Example: 255.255.255.0 l {{ nomremotenetmaskcidr }}_ l CIDR format netmask (prefix length) of provisioning interface on the node l Example: 24

23.04.0

Enabling Advanced Functionality

370

l {{ nom_remote_ntp_server }} l Address of NTP server assigned in DHCP offers (same as nom_remote_ server) l Example: 10.0.0.1
l {{ nom_remote_dns_server }} l Address of DNS server assigned in DHCP offers (same as nom_remote_ server) l Example: 10.0.0.1
l {{ nom_device_ipv4_address }} l This feature is only supported by Operations Manager nodes. l DHCP address assigned to target device l Example: 10.0.0.13
l {{ nomremotesshpubkey }} l Public part of an auto-generated SSH keypair on the remote node, which may be injected into device config to pre- authenticate the node for any postprovisioning activities. l Example: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDHO50MVT4A9Nl7vjDlS+76LgD BtEDm+J1gaQPNiIV62CGA6cm5wASDiddY/KZkHA l root@platypus.employee.bne.opengear.com (example only).

l {{ nom_device_hostname }} l This feature is only supported by Operations Manager nodes. l Hostname advertised by target device

23.04.0

Enabling Advanced Functionality

371

l Example: router l {{ nom_device_mac_address }}
Note: This feature is only supported by Operations Manager nodes.
l MAC Address of target device l Example: 00:12:34:56:78:9A For example, a basic Cumulus templated provisioning script may look like: cumulus_setup.sh.j2
#!/bin/bash curl tftp://{{nom_remote_server}}/cumulus_interfaces > /etc/network/interfaces

23.04.0

Enabling Advanced Functionality

372

POST-PROVISIONING SCRIPTS
Note: This feature is only supported by Operations Manager nodes.
It is possible to upload a script and associated with a device Resource Bundle, to be run by remote Operations Manager node once a Managed Device is considered provisioned. A device is considered to be in a provisioned state once has downloaded all of the files in the Resource Bundle it is being provisioned with. The script may be uploaded and associated via the UI during Resource Bundle creation using the Post-Provisioning Script option, or checked-in to the downloads directly via git/scp and specified in the YAML configuration for the device Resource Bundle:
demo_arista: device_type: arista config_file: 'demo_arista.cfg' image_file: 'arista_eos.swi' post_provision_script: arista_fixups_over_ssh.py post_provision_script_timeout: 900
Scripts may be implemented in bash, Python 2 or Python 3, and must start with a shebang i.e. the first line must be one of:
#!/bin/bash #!/usr/bin/env python2 #!/usr/bin/env python3
Notes: l Scripts are run in a monitored background processes in the Secure Provisioning
container (remote-dop) on the node

23.04.0

Enabling Advanced Functionality

373

l Scripts have a default 15 minute timeout, this can be manually configured in the YAML config (postprovisionscripttimeout_)
l Scripts may login to target device via the network using SSH key auth where nomremotesshpubkey has been injected into the device config (see Templated resource above), or using username/password with the sshpass command

23.04.0

Enabling Advanced Functionality

374

ORDERED PROVISIONING
Note: This feature is only supported by Operations Manager nodes.
The Provision After option allows you to create basic dependency chains, to enforce the order in which devices are provisioned. In certain scenarios it may be advantageous to control the order in which devices are provisioned, for example: l Ensure security infrastructure is provisioned ahead of systems that may other
become inadvertently exposed on the network. l Bring the production WAN up early to allow devices to provision services in-band,
saving cellular data. l Disallow local user access to the LAN until the network is fully up and running. When a dependent Resource Bundle has the Provision After option set, the node will not respond to ZTP requests for these resources until all required dependencies have been met. The Provision After property lists of one or more other, required Resource Bundles. Each required Resource Bundle creates a dependency that at least one device has been provisioned using the required bundle. If multiples of a particular required device must be provisioned before a dependent device, simply specify the dependency multiple times in the list.

23.04.0

Enabling Advanced Functionality

375

You may configure this via the UI during Resource Bundle creation using the Provision After option, or directly via git/scp in the YAML configuration for the device Resource Bundle:
access_switch: device_type: juniper config_file: 'jn-switch35.config' image_file: 'jinstall-ex-4200-13.2R1.1-domestic-signed.tgz' provision_after: - branch_router
TROUBLESHOOTING SECURE PROVISIONING
Secure Provisioning consists of several Docker containers: l The central-dop container runs on Lighthouse, hosting git repository l The dop-ui container runs on Lighthouse, serving the Secure Provisioning web UI l The remote-dop container runs on Operations Manager nodes, running DHCP
and TFTP/HTTP ZTP services Additionally, the deployment container runs on Lighthouse, orchestrates new module installation on Lighthouse and nodes. See the troubleshooting commands on the following page.

23.04.0

Enabling Advanced Functionality

376

TROUBLESHOOTING COMMANDS
The following are useful commands for troubleshooting issues with the NetOps modules:
Command

docker ps View running Docker containers. docker exec -ti container-name bash

Spawn a bash shell inside a container. docker logs container-name

View logs of a container.
docker exec -ti deployment ansible-playbook -vvv /ansible/dop_2.0.0.yml

Manually run module deployment in verbose mode, on Lighthouse. /etc/scripts/post-receive

Manually push ZTP resources from Lighthouse to Operations Manager nodes (inside central-dop container).
/etc/scripts/netops_ui_handler

If the Lighthouse UI fails to display after an upgrade, it's possible a NetOps UI component is failing to load and may be able to recover by running this command.

23.04.0

Enabling Advanced Functionality

377

23.04.0

Enabling Advanced Functionality

378

LIGHTHOUSE CLI, SERIAL PORT AND REST API LOGGING
Lighthouse offers command line interface (CLI) and REST API logs.
Note: Logging is disabled by default.
Once enabled, CLI and REST API logs can be found in /var/log/messages. All passwords are masked in the logs so that sensitive information is not stored in plain text or leaked. When you enable logging, you do not need to restart or log out and in again. There are a few caveats: l CLI logging only works for Interactive (human-controlled) terminals. Commands
generated by automated scripts will be logged. l Commands such as ssh or telnet do not produce logs for the commands sent
over the connection. l Requests can be logged for all endpoints, however, only endpoints implemented
in Lipy can have responses logged.
Note: These logs are not intended to be used as a definitive record of all commands that have ever been run. A malicious user with full root access can circumvent anything.
For more details see: http://ftp.opengear.com/download/api/lighthouse/og-rest-api-specification-v3-7.html

USING OGCONFIG-CLI TO ENABLE LOGGING

Logging should be enabled using ogconfig-cli. Use the following commands in a Lighthouse terminal to view, enable or disable logging:

23.04.0

Lighthouse CLI, Serial Port and REST API log-

379

ging

l system.logging_cli_enabled - Enable/disable logging commands entered in the Lighthouse Terminal.
l system.logging_rest_enabled - Enable/disable basic logging for the REST API. These logs report the following information about every REST API call:
l Time l Request type (GET/POST/PUT/DELETE) l HTTP status code l Username l Source IP Address l Endpoint
system.logging_rest_request_enabled - Enable/disable request logging for every REST API call. In addition to the basic logging, also logs the request body that was provided by the client, if any. Requires system.logging_rest_enabled to be enabled.

23.04.0

Lighthouse CLI, Serial Port and REST API log-

380

ging

CONFIG SEARCHES USING OGCONFIG-CLI1
Simple config searches can be performed from inside ogconfig-cli with the find command.
Note: The element being searched must be a list, otherwise the command returns an error.
The syntax is: find <path of list to search> <element to search for> <value to search for> For example, to find enabled users use: ogcfg > find users enabled true Or to find the enabled ports on a particular node set: ogcfg> find nodes[0].ports mode 'ConsoleServer'
ADD NODE AND PORT TO LIGHTHOUSE LOGS
Node and port logs will log all access to nodes via Lighthouse using the pmshell function, including which console, and which port was accessed by the user when logged in. When system logging is enabled, user and node selection and user and Port selection is logged. To enable node and port logging on Lighthouse: 1. Navigate to Lighthouse > Manage > Lighthouse > Local Terminal. 2. Login to a user that has rights to use CLI and ogconfig-cli. 3. Node and port logging can only be enabled through ogconfig-cli as follows

23.04.0

Config searches using ogconfig-cli1

381

Oncroot@lighthouse:~# ogconfig-cli ogcfg> set system.logging_cli_enabled true root-1-system_logging_cli_enabled: Integer <True> ogcfg> push OK ogcfg> exit
After node and port logging is enabled, you can view any logs recorded in your Lighthouse's syslog,located at /var/log/messages.
EXAMPLE LOGS
Here is an example of logs without request or response logging:
2020-03-17 15:29:37,237 INFO [root:117][waitress] POST 400 (root | 192.168.1.1) - /api/v3.4/system/licenses/file 2020-03-17 15:30:23,034 INFO [root:117][waitress] GET 200 (root | 192.168.1.1) - /api/v3.4/users?page=1&per_page=10
Here is an example of logs with request or response logging
Note: These logs differ slightly due to being logged with different systems:
2020-05-11T05:45:09.567214+00:00 lighthouse rest_api_log[2465]: PUT 200 (root | fd07:2218:1350:4b:a438:f8ff:fe4f:65fc) /api/v3.4/system/cli_session_timeout REQUEST={"system_cli_session_ timeout":{"timeout":0}} 2020-05-11 05:45:18,999 INFO [lipy.logging.rest_api:62][waitress] GET 200 (root | fd07:2218:1350:4b:a438:f8ff:fe4f:65fc) /api/v3.4/users?page=1&per_page=10 RESPONSE={'users': [{'username':

23.04.0

Config searches using ogconfig-cli1

382

'root', 'description': 'System wide SuperUser account', 'enabled': True, 'id': 'users-1', 'no_password': False, 'expired': False, 'locked_out': False,'rights': {'delete': True, 'modify': True}, 'groups': ['groups-2']}], 'meta': {'total_pages': 1}}

ENABLE LOGGING
To enable logging, run these commands on the Lighthouse local terminal:

root@lighthouse:~# ogconfig-cli ogcfg> set <value> true root-1-<value>: Integer <True>
ogcfg> push OK ogcfg> exit

Replace <value> with the desired setting: l system.logging_cli_enabled l system.logging_rest_enabled l system.logging_rest_request_enabled (requires
system.logging_rest_enabled) l system.logging_rest_response_enabled (requires
system.logging_rest_enabled) l To check if logging is enabled:
To establish if logging is enabled run these commands on the Lighthouse local terminal: root@lighthouse:~# ogconfig-cli ogcfg> print system

23.04.0

Config searches using ogconfig-cli1

383

This will produce output with Boolean values: system.logging_cli_enabled (bool): false l system.logging_rest_enabled (bool): false l system.logging_rest_request_enabled (bool): false l system.logging_rest_response_enabled (bool): false
DISABLE LOGGING
root@lighthouse:~# ogconfig-cli ogcfg> set <value> false root-1-<value>: Integer <False> ogcfg> push OK ogcfg> exit
Replace <value> with the desired setting:
l
system.logging_cli_enabled
l
system.logging_rest_enabled
l
system.logging_rest_request_enabled
l
system.logging_rest_response_enabled

SYSLOG EXPORT
Administrative users can specify multiple external servers to export the syslog to via TCP or UDP.

23.04.0

Config searches using ogconfig-cli1

384

Select SETTINGS > SERVICES > Syslog.
The Syslog page lists any previously added external syslog servers. To add a new one, 1. Click the + symbol. The Add External Syslog Server dialog displays.

23.04.0

Config searches using ogconfig-cli1

385

2. Enter the Server Address. 3. Enter the Protocol, either UDP or TCP. 4. Enter the correct Port. If no port is entered, UDP defaults to port 514 and TCP
defaults to 601. 5. Click Apply. To edit an existing syslog server, click the Edit button . Delete a server by clicking the x button.

23.04.0

Config searches using ogconfig-cli1

386

COMMAND LINE TOOLS
Lighthouse includes a web-based terminal. To access this bash shell instance: 1. Select MANAGE > LIGHTHOUSE > Local Terminal. A login prompt displays

2. Enter an administrator's username and press Return. 3. A password: prompt displays. Enter the administrator's password and press
Return. 4. A bash shell prompt displays. This shell supports most standard bash commands and also supports copy-andpaste to and from the terminal. Lighthouse-specific shell-based tools are listed below. node-command --list-nodes

23.04.0

Command line tools

387

EXAMPLE NODE-COMMAND OUTPUT
== node-command ID 2017-05-19T14:08:33.360164_29534 == 14:08:33 [SUCCESS] BNE-R01-ACM7004-5 192.168.128.2:22 OpenGear/ACM7004-5 Lighthouse 3b90d826 -- Tue May 9 13:42:16 EST 2017
14:08:33 [SUCCESS] BNE-R02-IM7216 192.168.128.3:22 OpenGear/IM72xx Lighthouse 3b90d826 -- Tue Jul 5 13:42:16 EST 20167
NODE-INFO
node-info is a shell-based tool for pulling more detailed information from console servers.

23.04.0

Command line tools

388

EXAMPLE NODE-INFO OUTPUT
$ node-info -A BNE-R01-ACM7004-5
address: 192.168.128.2 id: nodes-1 ssh port: 22 description: Brisbane Rack 1 Enrollment status: Enrolled connection status: Connected BNE-R02-IM7216 address: 192.168.128.3 id: nodes-2 ssh port: 22 description: Brisbane Rack 2 Enrollment status: Enrolled connection status: Connected
NODE-UPGRADE
node-upgrade is a tool for running firmware upgrades on multiple managed console servers with a single command and returns the results in tabular form to stdout. node-upgrade accepts the following arguments:

23.04.0

Command line tools

389

Short Argument -h
-q -V
-l
-D -I -i -n -a -A -p -g 23.04.0

Long Argument

Description

--help
--quiet --verbose
--list-nodes
--debug
--ignore-version
--node-id=<id> --node-name=<name> --node-addresss=<address> --all --product=<family> --smartgroup=<name>

Display usage information and exit
Suppress log messages
Display logs generated while upgrading
Display nodes and their upgradeable paths without executing upgrade
Display detailed log messages, implies --verbose
Ignore firmware version warnings for upgrade
Select node by config ID
Select node by name
Select node by VPN address
Select all available nodes
Select node by product family
Select nodes by smartgroup fil-

Command line tools

390

Short Argument

Long Argument

-f

--firmware-dir-

r=<directory>

-F

--firmware-file=<path>

-v

--version=<version>

Description
ter
The directory of the firmware files(s)
The firmware image to use for upgrade
The firmware version to upgrade to

AN EXAMPLE NODE-UPGRADE RUN
The following is an example node-upgrade command. It sets /mnt/data/nvram/latestfirmware as the directory node-upgrade looks to for the firmware image used as the source for all the firmware upgrade attempts. Every console server being managed from the active Lighthouse instance is targeted for an upgrade and the target console servers are set to upgrade to firmware 4.11.0.
# node-upgrade --all --firmware-dir /mnt/data/nvram/latest-firmware/ --version 4.11.0

NODE (UUID) MODEL FAMILY ADDRESS VERSION RESULT

---------------------------------------------------------------------

-------------------

cm7116-2 (nodes-4) CM7116-2 CM71XX 192.168.128.5 4.11.0 SUCCESS

im7208-2 (nodes-6) IM7208-2 IM72XX 192.168.128.7 4.10.0 SUCCESS

cm7196a-2 (nodes-5) CM7196A-2 CM7196 192.168.128.6 4.10.0 SUCCESS

acm7004-2 (nodes-2) ACM7004-2 ACM700X 192.168.128.3 4.11.0 SUCCESS

23.04.0

Command line tools

391

acm5508-2 (nodes-1) ACM5508-2 ACM550X 192.168.128.2 4.1.1u2 SUCCESS acm7004-5 (nodes-3) ACM7004-5 ACM7004-5 192.168.128.4 4.11.0 SUCCESS om2216-l (nodes-8) OM2216-L OMXXXX 192.168.128.9 21.Q2.1 FileNotFoundError om1208-8e (nodes-7) OM1208-8E OMXXXX 192.168.128.8 21.Q2.1 FileNotFoundError
l Version shows the device version prior to upgrade. l Result shows whether the upgrade for each device succeeded, or returns an
error with more detail.

RESULTS AND ERROR MESSAGES IN NODEUPGRADE
When the node-upgrade command is run with valid arguments and parameters, the program will return exit status 0 and the following results and error messages may be returned for each node listed.

Result

Causes

SUCCESS

Node upgrade succeeded

FileNotFoundError

No upgrade file found matching provided device family or version

UpgradeError

Device already has same or higher firmware version
Network connection lost

23.04.0

Command line tools

392

Result IncompatibleFirmwareError

Causes
Firmware file provided does not match the product family

In addition, the following exit statuses may be returned.

Exit Status

Description

Command exited normally

Invalid parameter

Unknown argument

PORT-TAGS
port-tags is a tool for tagging ports on multiple managed console servers with a single command and returns the results in tabular form to stdout. port-tags accepts the following arguments:

Short Argument

Long Argument

Description

-h

--help

Display usage information and exit

-p PORT_IDS

--port-ids PORT_IDS

Comma separated list of ports to target when linking and unlinking tags

23.04.0

Command line tools

393

Short Argument

Long Argument

Description

-n NODE_IDS

--node-ids NODE_IDS

-c TAGS_CREATE

--createtags TAGS_ CREATE

Comma separated list of nodes to target when linking and unlinking tags
Comma separated list of tags of list to be created

-l TAGS_LINK

--link-tags TAGS_LINK

-u TAGS_UNLINK

--unlinktags TAGS_ UNLINK

Comma separated list of tags to be linked to target ports
Comma separated list of tags to be unlinked from target ports

-d TAGS_DELETE

--deletetags TAGS_ DELETE

Comma separated list of tags to be deleted

-P -T -w WITH_TAGS

--listports
--list-tags
--with-tags WITH_TAGS

List all ports with their labels and ids
List all tags with their linked ports
Comma separated list of tags to limit the output of listed ports

CRON

The cron service can be used to schedule file execution at specific times. Daemon can be managed via the /etc/init.d/crond interface, and cron tables managed via crontab.

23.04.0

Command line tools

394

Usage: crontab [options] file crontab [options] crontab -n [hostname] Options:

Options

Description

-u <user>

define user

-e

edit user's crontab

-l

list user's crontab

-r

delete user's crontab

-i

prompt before deleting

-n <host>

set host in cluster to run users' crontabs

-c

get host in cluster to run users' crontabs

-x <mask>

enable debugging

To perform start/stop/restart on crond service:

/etc/init.d/crond start

23.04.0

Command line tools

395

To verify the current crond status: /etc/init.d/crond status To check current cron jobs running with the following command to list all crontabs: crontab -l To edit or create a custom crontab file: crontab -e
This opens a personal cron configuration file. Each line can contain one command to run. The following format is used: minute hour day-of-month month day-of-week command For example, the following entry will run a the specified backup.sh script every day at 3am: 0 3 * * * /etc/config/backup.sh When finished, save and close the crontab file.
SYSFLASH
sysflash is a shell-based tool for upgrading a Lighthouse instance's system. Sysflash will warn you if you do not have enough available space to upgrade to, though this is unlikely as space is reserved specifically for the upgrade process. Basic syntax is as follows: # sysflash [flags] [path/to/system-image.lg_upg | Percentencoded URL to firmware-image.lg_upg]

23.04.0

Command line tools

396

Note: URLs must be Percent-encoded and image filenames cannot include spaces.

sysflash includes eight flags which modify the standard upgrade behavior as well as the -h or --help flag, which returns all the available flags and their effects:

Arguments -b --board-name <name> -B --board-revision <version> -V --vendor <vendor> -I --no-version-check -m --no-migration -v --verbose -o --no-boot-once -r --no-reboot -h --help

Description Override board name (currently lighthouse-vm) Override board revision (currently 1.0) Override vendor (currently opengear) Do not check software version for upgradability Do not migrate current config. Start fresh. Increase verbosity (may repeat) Do not modify bootloader (implies --no-reboot) Do not reboot after upgrading Print this help

23.04.0

Command line tools

397

SUPPORT FOR MOUNTING THE HARD DISKS WITH OGCONFIG-CLI
Extra hard disks can be mounted in the Lighthouse VM by adding them to the configuration. Each new disk needs to have a partition created and formatted. Partitions can be created using fdisk or cfdisk, and should be formatted using the ext4 filesystem, using the mkfs.ext4 command:
root@lighthouse:~# mkfs.ext4 /dev/sdb1
The directory in which to mount the filesystem must be created. In general, new filesystems should be mounted in the provided mountpoint of /mnt/aux. Any other filesystems should be mounted within the filesystem mounted here
The UUID can be obtained by running blkid, this will output all the UUID's of the extra hard disks on the system. When referencing the UUID, ensure the entire UUID is enclosed within quote marks like this:
"UUID=33464920-f54f-46b6-bd84-12f76eeb92da"
else the command will not run correctly.
Add the information to the configuration system using ogconfig-cli as follows, modifying the path for the specific situation.

ogcfg> var m !append system.mountpoints map {8435270-fb39-11e7-8fcf-4fa11570959}: Map <> ogcfg> set {m}.node "UUID=33464920-f54f-46b6-bd84-12f76eeb92da" {b8c37c6-fb39-11e7-971c-23517b19319}: String </dev/sdb1> ogcfg> set {m}.path "/mnt/aux"{1fb50d8-fb39-11e7-994c-0f10b09cbd4}: String </mnt/aux> ogcfg> push OK

23.04.0

Command line tools

398

SUPPORT FOR MULTIPLE INSTANCE LIGHTHOUSE WITH OGCONFIG-CLI
Configuration system information can be displayed, searched, and set from both the primary and secondary Lighthouse instances. To reference the primary instance, use lighthouse_configurations[0]. The secondary instance is reachable with lighthouse_configurations[1].
For example, to display nodes all network connections to the primary Lighthouse, use:
ogcfg> print lighthouse_configurations[0].system.net.conns

23.04.0

Command line tools

399

GLOSSARY
Terms used in this guide to define Lighthouse elements and concepts are listed below.

Term

Definition

AUTHDOWNLOCAL (RADIUS/LDAP/AAA)

When this authentication option is selected, if remote authentication fails because the user does not exist on the remote AAA server, the user is denied access.

AUTHLOCAL (RADIUS/LDAP/AAA)

When this authentication option is selected, if remote authentication fails because the user does not exist on the remote AAA server, Lighthouse tries to authenticate the user using a local account.

CELLULAR HEALTH

Status of the cellular connection of a node.

DARK MODE

Changes the user interface to display mostly dark colors, reducing the light emitted by device screens.

DOCKER

An open platform for developing, shipping, and running applications. Docker enables you to separate your applications from your infrastructure so you can deliver software quickly.
Docker powers the NetOps platform within the Lighthouse product.

23.04.0

Glossary

400

ENROLLMENT ENROLLMENT BUNDLE
ENROLLED NODE ENROLLMENT TOKEN INSTANCE LIGHT MODE LIGHTHOUSE LIGHTHOUSE ENTERPRISE
LIGHTHOUSE VPN 23.04.0

Connecting a node to Lighthouse.
Used to assign a number of tags to a set of nodes when they are enrolled. During Enrollment, the bundle is specified using its name, and a bundle-specific Enrollment token.
A Node that has been connected to Lighthouse and is ready for use.
A password that authorizes the node with Lighthouse. Used when performing Nodebased, or ZTP Enrollment.
A single running Lighthouse.
Changes the user interface to display mostly light colors. This is the default UI setting.
System for accessing, managing and monitoring Opengear console servers.
Offers an elevated centralized management solution with additional functionality. It supports growing trends such as edge computing and SD-WAN with High Availability and Remote IP Access.
The OpenVPN based connections that the

Glossary

401

LOCALAUTH (RADIUS/LDAP/AAA) MANAGED DEVICE MULTIPLE INSTANCE NODE
PASSWORD POLICY PENDING NODE
23.04.0

Lighthouse instance has with the nodes it is managing
When this authentication option is selected, if local authentication fails, Lighthouse tries to authenticate the user using a remote AAA server.

A device that is managed via a node
through a serial, USB, or network
connection.
Access nodes through multiple Lighthouse instances at the same time.
A device that can be enrolled with Lighthouse, allowing it to be accessed, managed, and monitored. Currently, Opengear console servers are supported on a standard license, with support for other vendors Console Servers available as an add-on.
Administrative users can define rules for Lighthouse user passwords including length, types of characters, reuse, and expiration period.
A node that has been connected to Lighthouse and has been configured with a VPN Tunnel, but which has not yet been approved for access, monitoring, or management. The approval operation can be automated by configuring Lighthouse to auto- approve nodes.

Glossary

402

PRIMARY INSTANCE REMOTE LOGGING/REMOTE SYSLOG REPLICATION
ROLE
SECONDARY/DEPENDENT INSTANCES SMART GROUP
TAG

The main instance of Lighthouse used for updating configuration and node enrollment.
The ability to send logs to a remote server, for the offsite storage and review of logs.
Automatic copying of the primary Lighthouse database to any connected dependent instances. Replication ensures that these instances mirror the same information and maintains connections to the same nodes.
A set of access rights for a particular group. Three roles are defined within Lighthouse: Lighthouse Administrator, Node Administrator, and Node User.
Redundant instances of Lighthouse that are used to access Lighthouse information and connected nodes.
Dynamic filter used to search for particular nodes, or for defining the access rights of a group of users. Smart Groups use node properties, as well as tags defined by users.
User-defined attribute and value that is assigned to one or more nodes or ports. Tags are used when creating Smart Groups for filtering views or access to nodes and ports.

23.04.0

Glossary

403

madbuild