1 ACS580-01…, ACH580-01… and ACQ580-01… C135 frames R1 to R3 flange mounting kit quick installation guide Note: Attach this end to the bottom U-bracket to make
ACS580-01..., ACH580-01... and ACQ580-01...+C135 frames R1 to R3 flange mounting kit quick installation guide ABB parts Available as option +C135. Also separately available for ACX580-01 IP21 and IP55 with ordering codes: 1 3AXD50000105311(R1), 3AXD50000105328 (R2), 3AXD50000105335 (R3). 2 IP21 3 IP21 a 1 IP21 Part a for frames R1...R3 a j b k i c d 4 4 × M6 nut 6 N·m 5 e e g 6 f e 4 × M4 nut 4 × M5×20 screw d R1: 10 × M6×25 screw R2: 12 × M6×25 screw R3: 14 × M6×25 screw f R1...R2: 18 × M6 nut R3: 19 × M6 nut b h R1...R2: 2 × M4 ×8 screw c 8 × M6 nut 6 N·m 2 Note: First attach the inner sides of the brackets (1) that touch the drive, then the outer sides (2). 7 2 1 1 Frames R1-R2 g f g 4 × M5×20 screw 3 N·m 4 × M6 nut 6 N·m d e Note: Attach this end to the bottom U-bracket to make sure that the sealing is tight. IP21 Install auxiliary cooling fan. Ordering codes: Frames R1-R2: 3AXD50000050128 Frame R3: 3AUA0000088115 Frame R3 Note: Wear protective gloves when operating. f g 3AXD50000119172 Rev E (EN) 2019-03-29 2 ACS580-01..., ACH580-01... and ACQ580-01...+C135 frames R1 to R3 flange mounting kit quick installation guide 8 Frames R1...R2: 2 × M4 nut 1.5 N·m 2 × M4 × 8 Combi screw 1.5 N·m k Optional steps Note: Frame R3 is shown as an example. The cable shelf varies in different frame sizes. 9 Note: Reinstall the screws to avoid moisture i exchange through the empty holes! 1.5 N·m Frame R3: 2 × M4 nut 1.5 N·m jj 10 Frames R1...R2: 2 x M6 nuts Frames R3: 3 x M6 nuts 6 N·m 11 Note: UL Type 12 is fulfilled on the drive backside when the flange and hood are installed. Step10 is not required for IP55. Back Front h Back Front Back For dimensions, see the mounting template delivered with the flange mounting kit or ACS580-01..., ACH580-01... and ACQ580-01...+C135 drives with flange mounting kit supplement (3AXD50000349821 [English]). Go to www.abb.com/drives ACS580-01 manuals ACH580-01 manuals ACQ580-01 manuals 12 2 × M4 nut 1.5 N·m 13 Drill holes for M6 Rivet or Kalei nuts. Consider the hole size for the nuts. Rivet/Kalei nuts are not included in the delivery. Note: Mounting templates are different (size, number and position of holes) for different frame sizes. 14 15 1 × M6×25 screw 6 N·m 1 × M6×25 screw 6 N·m R1: 8 × M6×25 screw R2: 10 × M6×25 screw R3: 12 × M6×25 screw 6 N·mAcrobat Distiller 19.0 (Windows)