Manuals+

Jones Stephens Snap-On Bathtub Faceplate with Conversion Bar

Installation Instructions

Product Overview

This document provides installation instructions for the Jones Stephens Snap-On Bathtub Faceplate with Conversion Bar. It is compatible with Jones Stephens' quick test style bath waste kits.

Note: Components in bold text are included with this product.

Parts List

  1. Overflow Elbow
  2. Overflow Gasket
  3. Retainer Nut
  4. Faceplate
  5. 1-Hole Overflow Elbow
  6. Conversion Bar
  7. Faceplate Screw
  8. 2-Hole Overflow Elbow

Installation Instructions

Scenario 1: Replace Faceplate with New Faceplate

This scenario is for replacing an existing faceplate without using the conversion bar.

  1. Remove the old faceplate and retainer nut.
  2. Install the new retainer nut (No. 3).
  3. Snap the new faceplate (No. 4) onto the retainer nut (No. 3), rotating the faceplate (No. 4) so that the faceplate opening faces downward. (This installation does not use the conversion bar).

Note: The faceplate (4) may initially fit loosely on the retainer nut (3). The tapered thread pattern on the overflow elbow (1) will expand the outside diameter of the nut to provide a more secure fit during installation. You may tighten the retainer nut an additional 1/8 to 1/4 turn if the faceplate remains loose after installation.

Diagram for Scenario 1: Shows the overflow elbow (1), overflow gasket (2), retainer nut (3), and faceplate (4) assembled.

Scenario 2: Replace 1-Hole Faceplate with New Faceplate

This scenario involves replacing a 1-hole faceplate using the conversion bar.

  1. Remove the old 1-Hole faceplate and screw (No. 7).
  2. Place the retainer nut (No. 3) on the tub drain hole and secure it with the conversion bar (No. 6) and the screw (No. 7).
  3. Snap on the new faceplate (No. 4), with the slot facing down.
Diagram for Scenario 2: Shows the overflow elbow (5), overflow gasket (2), retainer nut (3), conversion bar (6), faceplate screw (7), and faceplate (4) assembled.

Scenario 3: Replace 2-Hole Faceplate with New Faceplate

This scenario involves replacing a 2-hole faceplate using the conversion bar.

  1. Remove the old 2-Hole faceplate and screws (No. 7).
  2. Place the retainer nut (No. 3) on the tub drain hole and secure it with the conversion bar (No. 6) and the screws (No. 7).
  3. Snap on the new faceplate (No. 4), with the slot facing down.
Diagram for Scenario 3: Shows the 2-hole overflow elbow (8), overflow gasket (2), retainer nut (3), conversion bar (6), faceplate screws (7), and faceplate (4) assembled.
Models: B0MB Snap On Bathtub Faceplate with Conversion Bar, B0MB, Snap On Bathtub Faceplate with Conversion Bar, Bathtub Faceplate with Conversion Bar, Faceplate with Conversion Bar, Conversion Bar, Bar

File Info : application/pdf, 1 Pages, 283.12KB

PDF preview unavailable. Download the PDF instead.

jones-stephens-b0wh-installation-sheet

References

Adobe PDF Library 17.0 Adobe InDesign 20.4 (Windows)

Related Documents

PreviewJones Stephens Tub Drain Conversion Trim Kit Installation Instructions
Comprehensive installation guide for Jones Stephens tub drain conversion trim kits. This document provides step-by-step instructions in English and Spanish for replacing old overflow plates and installing new drain assemblies, ensuring a proper seal. Compatible with various models including B51038 and B51031.
PreviewJones Stephens Floor Drain Trap Seal - Features & Specifications
Explore the Jones Stephens Floor Drain Trap Seal, a durable EPDM solution for preventing sewer gases and evaporation in floor drains. Features easy installation, various sizes, and compliance with ASSE1072-2007 and UPC standards.
PreviewJones Stephens PEX Copper Crimp Ring Specifications
Detailed specifications for Jones Stephens PEX Copper Crimp Ring fittings, including materials, dimensions, applications, and certifications for commercial and residential non-potable water systems.
PreviewPlumbite® Removal Tools for 1-1/4" - 2" Push-On Fittings
Instructions for using PlumBite® removal tools to disconnect 1-1/4" to 2" push-on fittings. Learn how to properly orient the tool and ensure fittings can be reused after disconnection.
PreviewSchedule 40 Flexible Bath Waste Kit with Quick Test Installation Guide
Step-by-step instructions for installing a Schedule 40 Flexible Bath Waste Kit with Quick Test, including parts list and assembly guidance.
PreviewJones Stephens Universal Toilet Flapper Installation Guide for TOTO®
Comprehensive instructions for installing the Jones Stephens Universal Flapper, designed to fit TOTO® toilets. Includes preparation, installation, and adjustment steps.
PreviewJones Stephens 28° Tank Trip Lever Installation Instructions
Step-by-step guide for installing the Jones Stephens 28° Tank Trip Lever, including a detailed description of the mechanism and brand information.
PreviewTankless Water Heater Valve Service Kit Installation Instructions
Comprehensive installation guide for the Jones Stephens Tankless Water Heater Valve Service Kit, covering isolation valves, recirculation valves, gas connections, and operational procedures.