RIGOL RSA5065N Real-Time Spectrum Analyzer Re... | ATEC
Advanced Test Equipment Corp. www.atecorp.com 800-404-ATEC (2832) RSA5000 Series Real-time Spectrum Analyzer Ultra-Real technology Frequency: up to 6.5 GHz Displayed average noise level (DANL): <-165 dBm (typical) Phase noise: <-108 dBc/Hz (typical) Level measurement uncertainty: <0.8 dB 6.5 GHz tracking generator Min. RBW 1 Hz Up to 40 MHz real-time analysis bandwidth Multiple measurement modes Various advanced measurement functions Vector signal analysis measurement application (option) EMI measurement application (option) Vector network analyzer application Multiple trigger modes and trigger masks Density, spectrogram, and other display modes PC software options 10.1'' capacitive multi-touch screen, supporting touch gestures USB, LAN, HDMI and other communication and display interfaces RSA5000 Series Real-time Spectrum Analyzer Built-in Linux operating system reliable and stable interface 10.1-inch capacitive multi-touch screen supporting touch gestures Built-in quad-core processor high processing speed Support keyboard and mouse operation TG : 100kHz to 3.2/6.5GHz -40 to 0dBm RF: 9kHz to 3.2/6.5GHz Product Dimensions: Width × Height × Depth = 410 mm × 224 mm × 135 mm Based on the Ultra-Real technology, the high-speed real-time measurement mode allows you to acquire the signals in the analysis bandwidth seamlessly and make data analysis. It also provides various display modes, such as Spectrogram, Density, and PVT. Besides, FMT function is also available. The Ultra-Real technology has the following features: Seamless analysis Seamless I/Q data acquisition in the analysis bandwidth Gap-free spectrum analysis 2 FMT Frequency mask trigger (FMT) to trigger the measurement by sporadic or transient events in the spectrum Composite displays Spectrogram for gap-free display of the spectrum Density spectrum for you to visualize how frequently signals occur RSA5000 Series Real-Time Spectrum Analyzer Integrates five measurement modes to address the challenges for multiple RF test requirements with one single instrument RSA5000 series provides EMI, RTSA, VSA, and VNA modes in addition to the traditional GPSA mode. Engineers may find it convenient to address multiple RF test challenges with just one instrument, effectively reducing their time and costs, greatly improving their working efficiency. Advanced measurement mode provides test items required for the transmitter test such as multichannel power, ACP, and occupied BW. Quickly recall the limit line compliant with the CISPR standard (e.g. EN55011, EN55012, etc.) to carry out pre-test and monitor the target point with three different detectors. 3 With the Density spectrum, you can find out the exceptional signals hidden behind the high-level signals, and capture them accurately with the FMT. You can freely set the way to display the measurement results, demonstrate multiple views of the signals at one time to obtain a clearer display effect through flexible adjustment of the display layout. In VNA mode, you can make S11, S21, and DTF measurements for the components and circuit networks. The network characteristics of the components under test can be accurately demonstrated in Smith chart, Polar chart, and other formats. Various operation modes to improve your operation experience The 10.1-inch capacitive multi-touch screen supports various touch gestures, making it always keep up with the mainstream development trend for screen operation. The gesture-enabled operation such as tapping, dragging, pinching & stretching makes the measurement action smooth and convenient, easy for you to operate the instrument. Meanwhile, the instrument still keeps the knob and key operation as what RIGOL traditional instruments have, optimizing the user-friendly interactive experience to a large extent. It also supports keyboard and mouse operation. Multiple interfaces to improve the connectivity of the instruments The instrument can be connected to a larger display/monitor via the HDMI interface for better display effects. The Web Control function allows you to directly control the device by accessing the device IP address, improving the experience of remote control. 4 Specifications Specifications are valid under the following conditions: the instrument is within the calibration period, is stored for at least two hours at 0 to 50 temperature, and is warmed up for 40 minutes. Unless otherwise noted, the specifications in this manual include the measurement uncertainty. Typical: characteristic performance, which 80 percent of the measurement results will meet at room temperature (approximately 25). This data is not warranted and does not include the measurement uncertainty. Nominal: the expected mean or average performance or a designed attribute (such as the 50 connector). This data is not warranted and is measured at room temperature (approximately 25). Measured: an attribute measured during the design phase which can be compared to the expected performance, such as the amplitude drift variation with time. This data is not warranted and is measured at room temperature (approximately 25). NOTE: All charts in this manual are the measurement results of multiple instruments at room temperature unless otherwise noted. The specifications (except the tracking generator specifications) listed in this manual are those when the tracking generator is off. Measurement Mode Measurement Mode General-Purpose Spectrum Analyzer (GPSA) Real-time Spectrum Analyzer (RTSA) Vector Signal Analysis Measurement Application (VSA) EMI Measurement Application (EMI) Vector Network Analyzer ApplicationVNA Measurement Mode and Product Model Adaptation Table RSA5032 RSA5032-TG GPSA RTSA VSA O O EMI O O VNA × × Tracking Generator × RSA5032N O O RSA5065 O O × × RSA5065-TG O O × Note: x indicates not supported; indicates standard configuration; O indicates optional configuration. The RSA5000N models include hardware capability not in the RSA5000-TG. The RSA5000-TG models cannot be used in VNA mode. RSA5065N O O All Measurement Modes Frequency RSA5032/-TG/N RSA5065/-TG/N Frequency Range 9 kHz to 3.2 GHz 9 kHz to 6.5 GHz Internal Reference Frequency Reference Frequency 10 MHz Accuracy ±[(time since last calibration × aging rate) + temperature stability + calibration accuracy] Initial Calibration Accuracy Standard Option OCXO-C08 <1 ppm <0.1 ppm Temperature Stability 0 to 50 , with the reference 25 Standard <0.5 ppm Option OCXO-C08 <0.005 ppm Aging Rate Standard Option OCXO-C08 <1 ppm/year <0.03 ppm/year 5 GPSA Mode Frequency Frequency Readout Accuracy Marker Frequency Resolution Marker Frequency Uncertainty Frequency Counter Resolution Uncertainty Frequency Span Range Resolution Uncertainty SSB Phase Noise Carrier Offset 1 kHz 10 kHz 100 kHz 1 MHz span/(number of sweep points - 1) ±(marker frequency readout × reference frequency accuracy + 1% × span + 10% × resolution bandwidth + marker frequency resolution) 1 Hz ±(marker frequency readout × reference frequency accuracy + counter resolution) 0 Hz, 10 Hz to maximum frequency 2 Hz ±span/(number of sweep points - 1) 20 to 30fc = 500 MHz <-95 dBc/Hz (typical) <-106 dBc/Hz, <-108 dBc/Hz (typical) <-106 dBc/Hz, <-108 dBc/Hz (typical) <-115 dBc/Hz, <-117 dBc/Hz (typical) Measured phase noise @ 10kHz offset of RSA5032/RSA5032-TG/RSA5032N/RSA5065/ RSA5065-TG/RSA5065N Residual FM Residual FM Bandwidth Resolution Bandwidth (-3 dB)[1] RBW Accuracy Resolution Filter Shape Factor (60 dB: 3 dB) Video Bandwidth (-3 dB) Resolution Bandwidth (-6 dB) 20 to 30 , RBW = VBW = 1 kHz <10 Hz (nominal) Set "Sweep Time Rule" to "Accy" 1 Hz to 10 MHz, in 1-3-10 sequence 3 kHz to 10 MHz, <5% (nominal) 10 Hz to 1 kHz, <15% (nominal) <5 (nominal) 1 Hz to 10 MHz, in 1-3-10 sequence 200 Hz, 9 kHz, 120 kHz, 1 MHz Note: [1] When the tracking generator is enabled or in zero span mode, the available range of RBW is from 1 kHz to 10 MHz. 6 Amplitude Measurement Range Range Maximum Safe Input Level[1] DC Voltage CW RF Power Maximum Damage Level CW RF Power fc 10 MHz DANL to +30 dBm 50 V +30 dBm, attenuation 40 dB, preamp off. -10 dBm, attenuation = 20 dB, preamp on. +33 dBm (2 W) Measured frequency VS maximum input power of RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N Measured frequency VS maximum input power of RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N Displayed Average Noise Level (DANL) Preamp off Preamp on 9 kHz to 100 kHz 100 kHz to 20 MHz 20 MHz to 1.5 GHz 1.5 GHz to 2.7 GHz 2.7 GHz to 3.2 GHz 3.2 GHz to 5.5 GHz 5.5 GHz to 6.5 GHz 100 kHz to 20 MHz 20 MHz to 1.5 GHz 1.5 GHz to 2.7 GHz 2.7 GHz to 3.2 GHz 3.2 GHz to 5.5 GHz 5.5 GHz to 6.5 GHz RSA5032/-TG/N RSA5065/-TG/N attenuation = 0 dB, sample detector, trace averages 50, tracking generator off, normalized to 1 Hz, 20 to 30 , input impedance = 50 . <-120 dBm (typical) <-120 dBm (typical) <-135 dBm, <-140 dBm (typical) <-135 dBm, <-140 dBm (typical) <-142 dBm, <-145 dBm (typical) <-142 dBm, <-145 dBm (typical) <-140 dBm, <-143 dBm (typical) <-140 dBm, <-143 dBm (typical) <-138 dBm, <-141 dBm (typical) <-138 dBm, <-141 dBm (typical) <-138 dBm, <-143 dBm (typical) <-136 dBm, <-141 dBm (typical) <-152 dBm, <-160 dBm (typical) <-152 dBm, <-160 dBm (typical) <-162 dBm, <-165 dBm (typical) <-162 dBm, <-165 dBm (typical) <-160 dBm, <-163 dBm (typical) <-160 dBm, <-163 dBm (typical) <-158 dBm, <-161 dBm (typical) <-158 dBm, <-161 dBm (typical) <-156 dBm, <-161 dBm (typical) <-154 dBm, <-159 dBm (typical) Note: [1] When fc < 10 MHz, the maximum safe input level is decreased. 7 Measured Displayed Average Noise Level of RSA5032/RSA5032-TG/RSA5032N Measured Displayed Average Noise Level of RSA5065/RSA5065-TG/RSA5065N Level Display Logarithmic Scale Linear Scale Number of Display Points Number of Traces Trace Detector Trace Function Scale Unit Frequency Response Preamp off 100 kHz to 3.2 GHz 3.2 GHz to 6.5 GHz Preamp on 100 kHz to 3.2 GHz 3.2 GHz to 6.5 GHz 1 dB to 200 dB 0 to reference level 801 6 normal, pos-peak, neg-peak, sample, RMS average, voltage average, and quasi-peak clear write, max hold, min hold, average, view, blank dBm, dBmV, dBV, nV, V, mV, V, nW, W, mW, W RSA5032/-TG/N RSA5065/-TG/N attenuation = 10 dB, relative to 50 MHz, 20 to 30 <0.5 dB, <0.3 dB (typical) <0.5 dB, <0.3 dB (typical) <0.7 dB, <0.5 dB (typical) attenuation = 0 dB, relative to 50 MHz, 20 to 30 <0.7 dB, <0.3 dB (typical) <0.7 dB, <0.3 dB (typical) <0.9 dB, <0.5 dB (typical) Measured frequency response of RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N Measured frequency response of RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N 8 Input Attenuation Switching Uncertainty Setting Range 0 dB to 50 dB, in 1 dB step Switching Uncertainty fc = 50 MHz, relative to 10 dB, preamp off, 20 to 30 <0.3 dB Measured attenuation switching uncertainty of RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N Measured attenuation switching uncertainty VS temperature of RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N Absolute Amplitude Accuracy Uncertainty Reference Level Range Logarithmic Scale Linear Scale RBW Switching Uncertainty Preamp (Option RSA5000-PA) Frequency Range Gain Level Measurement Uncertainty Level Measurement Uncertainty fc = 50 MHz, peak detector, preamp off, attenuation = 10 dB, input signal level = -10 dBm, 20 to 30 <0.3 dB -170 dBm to +30 dBm, in 0.01 dB step 707 pV to 7.07 V, 0.11% (0.01 dB) resolution Set "Sweep Time Rule" to "Accy", relative to 30 kHz RBW 1 Hz to 1 MHz <0.1 dB 3 MHz, 10 MHz <0.3 dB RSA5032/-TG/N 100 kHz to 3.2 GHz 20 dB (nominal) RSA5065/-TG/N 100 kHz to 6.5 GHz 95% confidence level, S/N > 20 dB, RBW = VBW = 1 kHz, preamp off, attenuation = 10 dB, -50 dBm < input level 0 dBm, fc > 10 MHz, 20 to 30 <0.8 dB (nominal) Measured level measurement uncertainty VS temperature @-10dBm of RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N 9 RF Input VSWR VSWR RSA5032/-TG/N attenuation 10 dB, preamp off 300 kHz to 3.2 GHz <1.6 (nominal) 3.2 GHz to 6.5 GHz RSA5065/-TG/N <1.6 (nominal) <1.8 (nominal) Measured VSWR of RSA5032/RSA5032-TG/RSA5032N Measured VSWR of RSA5065/RSA5065-TG/RSA5065N Distortion Second Harmonic Intercept (SHI) Third-order Intercept (TOI) 1 dB Gain Compression (P1dB)[1] fc 50 MHz, input signal level = -20 dBm, attenuation = 0 dB, preamp off. +45 dBm fc 50 MHz, two -20 dBm tones at input mixer spaced by 200 kHz, attenuation = 0 dB, preamp off. +11 dBm, +15 dBm (typical) fc 50 MHz, attenuation = 0 dB, preamp off. 0 dBm (nominal) of RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N Spurious Response Residual Response Intermediate Frequency System-related Sideband Input-related Spurious input terminated with a 50 load, attenuation = 0 dB, 20 to 30 <-90 dBm, <-100 dBm (typical) <-60 dBc referenced to local oscillators, referenced to A/D conversion, referenced to subharmonic of first LO, referenced to harmonic of first LO <-60 dBc mixer level = -30 dBm <-60 dBc Note: [1] The frequency interval of the two-tone signals should be greater than 10 MHz. 10 Sweep Sweep Sweep Time Sweep Time Uncertainty Sweep Mode span 10 Hz zero span span 10 Hz, RBW 1 kHz zero span (sweep time > 1 ms) 1 ms to 4,000 s 1 s to 6,000 s 5% (nominal) 5% (nominal) continue, single Trigger Trigger Trigger Source Trigger Delay span 10 Hz zero span free run, external 1, external 2, video 0 to 500 ms 0 to 500 ms Tracking Generator Tracking Generator Output Frequency Range Output Level Range Output Level Resolution Output Flatness RSA5032-TG/N 100 kHz to 3.2 GHz -40 dBm to 0 dBm 1 dB relative to 50 MHz ±3 dB (nominal) RSA5065-TG/N 100 kHz to 6.5 GHz @0dBm of RSA5032-TG/RSA5032N/RSA5065-TG/RSA5065N @0dBm of RSA5032-TG/RSA5032N/RSA5065-TG/RSA5065N 11 RTSA Mode Real-time Analysis Bandwidth Min. Signal Duration for 100% POI at the Full-Scale Accuracy Trace Detector Number of Traces Window Type 25 MHz 40 MHz (Option RSA5000-B40) maximum span, default Kaiser window 7.45 s pos-peak, neg-peak, sample, average 6 Hanning, Blackman-Harris, Rectangular, Flattop, Kaiser, and Gaussian provides 6 RBWs for each window, except the Rectangular; for Kaiser window Span Min. bandwidth Max. bandwidth Resolution Bandwidth 40 MHz 25 MHz 100 kHz 62.8 kHz 10 MHz 25.1 kHz 1 MHz 2.51 kHz 100 kHz 251 Hz Max. Sample Rate 51.2 MSa/s FFT Rate 146,484/s (norminal) Number of Markers 8 Amplitude Resolution 0.01 dB Frequency Point 801 Acquisition Time Max. sample rate >156.5 s Min. Signal Duration for 100% POI at Different RBWs Duration Time (s) Span RBW1 RBW2 RBW3 RBW4 40 MHz 26.9 16.9 11.9 9.32 25 MHz 38.9 22.9 14.9 10.9 10 MHz 86.8 46.8 26.8 16.8 1 MHz 807 407 207 107 Amplitude Amplitude Flatness ±0.5 dB[1] (nominal) SFDR <-60 dBc (typical) Density Probability Range 0 to 100% (with a step of 0.1%) Min. Span 5 kHz Persistence Duration 32 ms to 10 s Spectrogram History Depth 8,192 Dynamic Range Covered by Bitmap Color 200 dB PVT Min. Acquisition Time 187.9 s Max. Acquisition Time 40 s Trigger Trigger Source free run, external 1, external 2, power (time), FMT FMT Trigger Diagram density, spectrogram, normal, PVT Trigger Resolution 0.5 dB (nominal) Trigger Criteria enter, leave, inside, outside, enter-leave, leave-enter 3.21 MHz 2.01 MHz 804 kHz 80.4 kHz 8.04 kHz RBW5 8.07 8.82 11.8 56.3 RBW6 7.45 7.82 9.30 31.3 Note: [1] Only applicable to the Normal measurement. 12 VSA Mode (Option RSA5000-VSA) Capture Oversampling Capture Oversampling Capture Length Capture Oversampling = 4 Capture Oversampling = 8 Capture Oversampling = 16 Sample Rate Maximum Sample Rate Symbol Rate Symbol Rate Usable I/Q Bandwidth Usable I/Q Bandwidth Trigger Mode Trigger Mode Modulation Format FSK MSK PSK QAM ASK Filter Type Measurement Filter Type Reference Filter Type Predefined standard Cellular Wireless Networking Others Measurement Uncertainty Residual Error for QPSK Test Signal Symbol Rate 100 kHz 1 MHz Residual Error for FSK Test Signal Symbol Rate 100 kHz 1 MHz EMI Mode (Option RSA5000-EMI) EMI Resolution Bandwidth Resolution Bandwidth (-3 dB) Resolution Bandwidth (-6 dB) EMI Detector Detector 4, 8, 16 Maximum 4096 Maximum 2048 Maximum 1024 32 MHz 51.2 MHz (Option RSA5000-B40) depends on capture oversampling = sample rate/capture oversampling, 1 kHz symbol rate × capture oversampling / 1.28 free run, external1, external2, power (time), FMT 2FSK, 4FSK, 8FSK, including GMSK, can select differential coding or not BPSK, QPSK, OQPSK, DQPSK, /4-DQPSK, 8PSK, D8PSK, /8-D8PSK 16QAM, 32QAM, 64QAM 2ASK, 4ASK No Filter, RRC, Gaussian, Rectangular, User Defined Raised Cosine, RRC, Gaussian, Rectangular, Half Sine, User Defined GSM, NADC, WCDMA, PDC, PHP (PHS) Bluetooth, WLAN (802.11b), ZigBee TETRA, DECT, APCO-25 Specifications apply under the following conditions: temperature from +20 °C to +30 °C signal level 25 dBm properly adjusted reference level offset between device's center frequency and signal's center frequency smaller than 5 % of symbol rate Random data sequence Capture oversampling is set to 4. The reference filter is RRC with rolloff factor 0.22. The measurement filter is RRC with rolloff factor 0.22. The result length is 150 symbol. The center frequency is 1 GHz. Residual EVM RMS < 1.5% (nominal) < 2% (nominal) The reference filter is RRC with rolloff factor 0.22. The measurement filter is RRC with rolloff factor 0.22. The FSK reference deviation is a quarter of the symbol rate. The result length is 150 symbols. The center frequency is 1 GHz. Residual Frequency Error RMS < 2% (nominal) < 2.5% (nominal) 100 Hz to 10 MHz, in 1-3-10 sequence 200 Hz, 9 kHz, 120 kHz, 1 MHz pos-peak, neg-peak, average, quasi-peak, CISPR average, RMS average 13 EMI Key Feature Key Feature VNA Mode Measurement Setup Frequency Range Measurement Type Measurement Bandwidth Data Points Trace Type Number of Markers Mechanical Calibration Kit Transmission Measurement S21 Port Output Power Format Magnitude Range Magnitude Resolution Dynamic Range Reflection Measurement S11 Port Output Power Format Magnitude Range Magnitude Resolution VSWR Range Corrected Directivity (With CK106A) CISPR 16-1-1 detectors CISPR 16-1-1 bandwidths log and linear display signal table scan table simultaneous detectors automatic limit testing measure at marker delta to limit step and swept scans report generation RSA5032N RSA5065N 10 MHz~3.2 GHz 10 MHz~6.5 GHz Reflection(S11), Transmission(S21), Distance-to-fault (DTF) 1 kHz~10 MHzin 1-3-10 sequence 101~10001; default 201 mem, math, clear write, average, max hold, min hold, 8 Open, Short, Load, Through; User Calibration Kit -10 dBm (nom.) Lin Mag, Log Mag, Phase, Group Delay -500 G to 500 G Log: 100f; Lin 1a S21, RBW=10 kHz, Port1 level=0 dBm, Log Mag, Average=50 80 dB (nom.) -10 dBm (nom.) Lin Mag, Log Mag, Phase, Group Delay, SWR, Smith Chart (Lin/Phase, Log/Phase, Real/Imag, R+j*X, G+j*B), Polar Chart (Lin/Phase, Log/Phase, Real/Imag) -500 G to 500 G Log: 100f; Lin 1a -500 G to 500 G S11, Log Mag, Average=50 40 dB (nom.) Measured return loss of RSA5000N port 1 14 Measured return loss of RSA5000N port 1 Distance to FaultDTF Port Output Power Format Maximum Distance (meters) Fault Resolution in meters Windows Velocity Factor 0 dBm (nom.) Lin Mag, Log Mag, SWR 8.0X1010 x Velocity Factor/Span 1.5x108 x Velocity Factor/Span Gaussian, Flattop, Rectangular, Hanning, Hamming 0.1~1 General Specifications Display Type capacitive multi-touch screen Resolution 1024 × 600 pixels Size 10.1'' Color 24-bit color Printer Supported Protocol network printer Mass Memory Mass Memory Internal Storage External Storage 512 MB (nominal) USB storage device (not supplied) Power Input Voltage Range, AC 100 V to 240 V (nominal) AC Frequency 45 Hz to 440 Hz Power Consumption 55 W (typical), max. 90 W with all options Environment Temperature Operating Temperature Range 0 to 50 Storage Temperature Range -20 to 70 Humidity 0 to 30 30 to 40 95% RH 75% RH Altitude Operating Height below 3,048 m (10,000 feet) Electromagnetic Compatibility and Safety complies with EMC Directive 2014/30/EU, complies with or above the standard specified in IEC61326-1:2013/EN61326-1:2013 Group 1 Class A CISPR 11/EN 55011 IEC 61000-4-2:2008/EN 61000-4-2 ±4.0 kV (contact discharge), ±8.0 kV (air discharge) EMC IEC 61000-4-3:2002/EN 61000-4-3 3V/m (80 MHz to 1 GHz); 3V/m (1.4 GHz to 2 GHz); 1V/m (2.0 GHz to 2.7 GHz) IEC 61000-4-4:2004/EN 61000-4-4 1 kV power IEC 61000-4-5:2001/EN 0.5 kV (phase-to-neutral voltage); 1 kV (phase-to-earth voltage); 61000-4-5 1 kV (neutral-to-earth voltage) IEC 61000-4-6:2003/EN 61000-4-6 3 V, 0.15 to 80 MHz IEC 61000-4-11:2004/ voltage dip: 0% UT during half cycle; 0% UT during 1 cycle; 70% UT during 25 cycles EN 61000-4-11 short interruption: 0% UT during 250 cycles Safety complies with IEC 61010-1:2010 (Third Edition)/EN 61010-1:2010, UL 61010-1:2012 R4.16 and CAN/CSA-C22.2 No. 61010-1-12+ GI1+ GI2 Environmental Stress Samples of this product have been type tested in accordance with RIGOL's reliability test regulations and verified to be robust against the environmental stresses of storage, transportation, and end-use; those stresses include, but are not limited to, temperature, humidity, shock, and vibration. The test methods are compliant with standards specified in GB/T6587 Class 2 and MILPRF-28800F Class 3. 15 Size (W x H x D) Weight Without Tracking Generator With Tracking Generator Calibration Interval Recommended Calibration Interval 410 mm × 224 mm × 135 mm (16.14'' × 8.82'' × 5.32'') 4.65 kg (10.25 lb) 4.95 kg (10.91 lb) 18 months Input/Output Front Panel Connector RF Input Impedance Connector TG Output Impedance Connector Internal/External Reference Frequency Internal Reference Output Level Impedance Connector Frequency External Reference Input Level Impedance Connector External Trigger Input/Output Impedance External Trigger Input 1 Connector Level Impedance External Trigger Input 2/Trigger Output Connector on trigger input on trigger output Level IF Output Frequency IF Output Communication Interface USB Host (4 ports) USB Device LAN HDMI Amplitude Impedance Connector Connector Protocol Connector Protocol Connector Protocol Connector Protocol 50 (nominal) N-type female 50 (nominal) N-type female 10 MHz +3 dBm to +10 dBm, +7 dBm (typical) 50 (nominal) BNC female 10 MHz ± 5 ppm 0 dBm to +10 dBm 50 (nominal) BNC female 1 k (nominal) BNC female 5 V TTL level 1 k (nominal) 50 (nominal) BNC female 5 V TTL level 430 MHz ± 20 MHz (nominal) RF input power (PRFin) -10 dBm, attenuation = 0, preamp off. 50MHz, PRFin ± 4 dB (nominal) other frequency, PRFin ± 4 dB + RF frequency response (nominal) 50 (nominal) SMB male A plug version 2.0 B plug version 2.0 100/1000Base, RJ-45 LXI Core 2011 Device A plug HDMI 1.4b 16 Order Information Model Standard Accessories Option Optional Accessories Description Order No . Real-time Spectrum Analyzer, 9 kHz to 3.2 GHz Real-time Spectrum Analyzer, 9 kHz to 6.5 GHz Real-time Spectrum Analyzer, 9 kHz to 3.2 GHz (include TG) Real-time Spectrum Analyzer, 9 kHz to 6.5 GHz (include TG) RSA5032 RSA5065 RSA5032-TG RSA5065-TG Real-time Spectrum Analyzer, 9 kHz to 3.2 GHz (include TG and VNA) RSA5032N Real-time Spectrum Analyzer, 9 kHz to 6.5 GHz (include TG and VNA) Quick Guide (hard copy) Power Cable Vector Signal Analysis Measurement Application EMI Measurement Application RSA5065N RSA5000-VSA RSA5000-EMI Preamplifier (PA) RSA5000-PA High Stability Clock Real-time/Analysis Bandwidth 40 MHz Advanced Measurement Kit Spectrum Analyzer PC Software EMI Pre-compliance Test Software OCXO-C08 RSA5000-B40 RSA5000-AMK Ultra Spectrum S1210 EMI Pre-compliance Software High-performance Network Analysis Calibration Kit(frequency range: DC to 6.5 GHz) CK106A Economical Network Analysis Calibration Kit(frequency range: DC to 1.5 GHz) CK106E Include: N-SMA cable, BNC-BNC cable, N-BNC adaptor, N-SMA adaptor, 75 -50 adaptor, 900 MHz/1.8 GHz antenna (2pcs), 2.4 GHz antenna (2pcs) DSA Utility Kit Include: N(F)-N(F) adaptor (1pcs), N(M)-N(M) adaptor (1pcs), N(M)-SMA(F) adaptor (2pcs), N(M)-BNC(F) adaptor (2pcs), SMA(F)-SMA(F) adaptor (1pcs), SMA(M)-SMA(M) adaptor (1pcs), RF Adaptor Kit BNC T type adaptor (1pcs), 50 SMA load (1pcs), 50 BNC impedance adaptor (1pcs) Include: 50 to 75 adaptor (2pcs) RF CATV Kit Include: 6 dB attenuator (1pcs), 10 dB attenuator (2pcs) RF Attenuator Kit 30 dB high-power attenuator, with the max power of 100 W ATT03301H N(M)-N(M) RF Cable N(M)-SMA(M) RF Cable CB-NM-NM-75-L-12G CB-NM-SMAM-75-L-12G VSWR Bridge, 1 MHz to 3.2 GHz VB1032 VSWR Bridge, 2 GHz to 8 GHz VB1080 Near-field Probe Rack Mount Kit USB Cable NFP-3 RM6041 CB-USBA-USBB-FF-150 Warranty Three years for the mainframe. 17 HEADQUARTER RIGOL TECHNOLOGIES CO., LTD. No.8 Keling Road, New District,Suzhou, JiangSu,P.R.China Tel:+86-400620002 Email:info@rigol.com EUROPE RIGOL TECHNOLOGIES EU GmbH Lindbergh str. 4 82178 Puchheim Germany Tel: +49-89/89418950 Email: info-europe@rigol.com NORTH AMERICA RIGOL TECHNOLOGIES, USA INC. 8140 SW Nimbus Ave. Beaverton, OR 97008 Tel: +1-877-4-RIGOL-1 Fax: +1-877-4-RIGOL-1 Email: info@rigol.com JAPAN RIGOL TECHNOLOGIES JAPAN, LLC MJ Bldg. 3F, 1-7-4 Minato, Chuou-ku, Tokyo, Japan 104-0043 Tel: +81-3-6262-8932 Fax: +81-3-6262-8933 Email: info-japan@rigol.com RIGOL® is the trademark of RIGOL TECHNOLOGIES CO., LTD. Product information in this document subject to update without notice. For the latest information about RIGOL's products, applications and services, please contact local RIGOL Channel Partners or access RIGOL official website: www.rigol.com DSD07100-2021-11Adobe PDF Library 16.0.3 Adobe InDesign 17.0 (Windows)