Schlage Strikes

Model: 10-109 = 10-094x10-001

Specifications

Jamb Type: Wood

Style: Combo Square corner, box 1 7/8" x 2 3/4", T Strike, Square corner, box, 1 7/8" x 2 3/4"

Standard for: S200

Optional for: CS210

Notes

Dimensions X, Y, and Z are variables dependent on door thickness.
Strike locations on frames must be adjusted for the thickness of door silencers when used.
Curved strike extension beyond jamb at Z must not be less than 3/16" (5) to ensure proper functioning of the latch bolt.
1 1/8" (29) lip length for 1 3/8" (35) to 1 3/4" (44) doors. Other lengths are available.

Dimensions shown in parentheses () are in millimeters.

Door Preparation Template Description

The document provides a detailed template for preparing a door frame for strikes. It includes diagrams illustrating strike placement and dimensions.

Main Strike Layout

This section details the placement of strikes on the door frame. It shows:

Reference points: "Door Frame Stop" and "Door Frame Edge".
Two primary strike openings: a larger oval for the latch bolt and a smaller opening above it for a deadbolt (indicated by "Bolt Center" and "Latch Center").
Key dimensions are provided in inches with millimeter equivalents in parentheses:
- Distance from the Door Frame Stop to the center of the strikes.
- Distance between the center of the latch strike and the center of the bolt strike.
- Diameter of the Dia. Hole (7/8" or 22mm).
- Lip length (e.g., 1 1/8" or 29mm).
Alignment indicators like "Same as Bolt Center" and "Same as Bolt/Latch Center" are used.
Screw hole locations are marked with dimensions.

Frame Reinforcer Details

A separate diagram illustrates the use of a "Frame Reinforcer". When used, additional preparation is required, specifically: 2 pilot holes and a 3/16" (5mm) deeper mortise.

Latch Detail and Depth of Box

A magnified view shows the interaction of the latch with the strike and defines critical dimensions:

Dimensions X, Y, and Z are noted as variables dependent on door thickness.
The diagram specifies the "Depth of Box for Regular Latch" and the "Depth of Box furnished for 3/4" (19mm) throw Fire Door Latch".

	Schlage CS210 CS-Series Door Preparation Template Detailed door preparation template for the Schlage CS210 CS-Series lock, including dimensions for door type, thickness, faceplate, backsets, and hole placements.
	Schlage L/LV/LM/LMV-Series Door Preparation Template Detailed door preparation template for Schlage L/LV/LM/LMV-Series locks, including models L/LV9070, L/LV9076, L/LV9080, L/LV9080EL/EU, and L9465. Essential for wood or composite doors with rose trim.
	Schlage Knobs and Levers: Door Preparation for Existing Holes Comprehensive guide for preparing doors with existing holes for Schlage knobs and levers. Covers essential measurements for door thickness, backset, hole sizes, and door jamb adjustments.
	Schlage L/LV/LM/LMV-Series Model L0172 Door Preparation Template A guide for preparing wood or composite doors for Schlage L/LV/LM/LMV-Series Model L0172 locks with escutcheon trim. Includes detailed measurements and diagrams for drilling.
	Schlage L/LV/LM/LMV-Series Electrified Locks Door Preparation Template L924 Detailed door preparation template for Schlage L/LV/LM/LMV-Series electrified locks, including models L9094, L9095, L9494, and L9495. Provides dimensions for metal, flat or beveled doors with Rose trim.
	Schlage Control™ Smart Deadbolt BE467F Door Preparation Instructions Step-by-step guide for preparing a door with existing holes for the Schlage Control™ Smart Deadbolt (Model BE467F), including measurements for thickness, backset, and hole sizes, and door jamb checks.
	Schlage XE360-Series XE101 Door Preparation Template Detailed dimensions and instructions for preparing doors for Schlage XE360-Series XE360-T locks, using the XE101 template. Includes measurements in inches and millimeters for door type, thickness, faceplate, and backsets.
	Schlage Ascent Entrance Lever and Ease S2 Door Preparation Guide Technical specifications and door preparation guidelines for installing Schlage Ascent Entrance Lever and Schlage Ease S2 door hardware, including key dimensions and installation notes.