2 of 3 EON 600 While powering up the speaker, holding EQ and Boot buttons will return the speaker to factory default settings. When the reset begins all LEDs will blink on the speaker control panel.
Press and hold the Bluetooth button until all lights turn off and the Power light flashes (~10 seconds). Note: After resetting, the EQ ...
v1.0 11-Jan-21 EON ONE Compact Press and hold both the DUCKING and PHANTOM buttons for 5 seconds. All LEDs will flash to confirm the process. IRX Press and hold the Bluetooth button until all lights turn off and the Power light flashes (~10 seconds). Note: After resetting, the EQ Preset will be set to "FLAT." 1 of 3 EON 600 While powering up the speaker, holding EQ+ and Boot buttons will return the speaker to factory default settings. When the reset begins all LEDs will blink on the speaker control panel. This procedure can be utilized as a backdoor to restoring reliable behavior. The speaker will not be part of the mobile application's network group any longer, so the device has to be re-added. PRX 800 1. Turn the speaker power off. 2. Press and hold the POLARITY or SYSTEM EQ (NORM/BOOST or MAIN/MONITOR) button then turn the speaker power back on. Keep the button held for 5 seconds or until the LED above the POLARITY or SYSTEM EQ (NORM/BOOST or MAIN/MONITOR) button flashes briefly. 3. All DSP and network settings have now been reset back to the factory default. 2 of 3Microsoft Word 2016 Microsoft Word 2016