AI Camera Glasses

Pairing the Glasses

Upon unboxing, the S7 Smart Glasses should be charged and ready for setup. Follow these steps to pair them with the companion app:

1. Take the glasses out of the leather case.
2. Press and hold the power button on the left temple for 3 seconds to turn on the glasses. A blue indicator light will flash during startup, and a "System ready" prompt will be heard upon completion.
3. Once the indicator light stops flashing blue and the "System ready" prompt is heard, the device is ready to pair.
4. Open the companion app on your smartphone to initiate pairing.

Pairing with the App: The app is essential for accessing the full range of features. Download it from the App Store or via a QR code. You will need to log in with your account. The app is available for mobile devices only.

Device Requirements:

• A supported smartphone (Android 7.0 or later with location services enabled, or iOS 15.6 or later).
• A valid account.
• The companion app.
• A stable internet connection.

Note: For full voice control functionality, the glasses must be connected to your smartphone via an active internet connection. To import photos, connect your phone to the glasses' Wi-Fi hotspot.

Pairing Restrictions: The S7 Smart Glasses can only be paired with one valid account at a time. To pair with a different account, the glasses must first be restored to factory settings.

Charging the Glasses

First-Time Charging:

1. Remove the charging plug from the packaging (located on the charging case).
2. Peel off the protective film from the metal charging contact.
3. Insert one end of the Type-C charging cable into the charging plug.
4. Connect the other end of the cable to the charging contact on the bottom of the S7 bridge.

The charging indicator light will flash red during charging and turn solid green when fully charged.

Charging the Charging Case:

1. Insert the USB-C cable into the bottom of the charging case.
2. Connect the other end to a power adapter and plug it into a wall outlet.

Charging Cable Requirements:

• USB-C to USB-C or USB-C to USB-A cables (must meet USB-C standards).
• Compatible with any USB generation.
• Minimum 3A rated current for the case. (Lower-rated cables may work but will charge slower.)
• Minimum 0.5A rated current for the glasses. (Lower-rated cables may work but will charge slower.)

Power Adapter Requirements:

• USB-C or USB-A compatible charger.
• 5W or higher recommended for the charging plug. (Lower power chargers may still work but take longer; some may not work at all for the charging case.)
• USB-PD (Power Delivery) is not required.

Both the glasses and the charging case have their own batteries. Battery levels can be checked via the app.

Possible Causes of Charging Error:

• Liquid Detected: Ensure charging contacts are clean and dry.
• High Temperature: Move the charging case to a cooler location if it's too hot.
• Incompatible Charger: Try a different USB-C cable or power adapter as recommended.
• Connection Issues: If glasses don't turn on after being placed in the case, dirt, sweat, or liquid might be affecting the connection. Clean both devices.
• Cable Incompatibility: Some USB-C cables may not be compatible, potentially causing the case's LED to flash orange or green. The app might not display the charging icon.

If charging issues persist, try a different USB-C cable or power adapter. Compatible accessories are available at the Store.

LED Notification Indicator

The LED indicator near the right frame changes color to signify changes in power, camera function, voice control, and call status. Detailed meanings of each color are available in the app's LED Notification Indicator Library. Access it by tapping the icon in the lower-left corner of the app, then "View All" next to "Learning and Exploration," and finally "Learn About Gestures and LED Lights."

Powering On and Off

To Power On: Press and hold the power button on the left temple for 3 seconds. The LED notification light will flash, and a "System ready" prompt will be heard when the glasses are ready for use.

To Power Off: Press and hold the power button for 3 seconds. A "Power off" prompt will be heard, and the glasses will shut down.

Restarting: If experiencing issues, restarting the glasses can resolve minor problems without deleting media or unpairing the device.

Software Updates

The companion app will notify you of available software updates for the glasses and the app, which can be downloaded automatically. You can also check for updates manually or disable automatic updates in the app's settings. Navigate to Menu > Device Settings > Updates to manage these options.

Capture (Photo & Video)

Photo: Press and release the function button on the right temple. The inner LED will flash green, and a "ding" sound confirms the photo is taken. A white LED on the front will flash during shooting.

Video: Press and hold the function button. The inner LED stays green, and a "ding" sound confirms recording has started. A white LED on the front stays on during recording. Press the button again to stop recording; a "ding-dong" sound and the inner LED turning off confirm the recording has ended.

Settings: In the app, you can adjust Photo Resolution (e.g., 1280x720, 1920x1080, 2560x1920, 3840x2160, 4208x3120), Video Resolution, Video Quality (low, medium, high), and Video Length (up to 3 minutes).

Photo & Video Sync

Once photos and videos are synced to the app, they are automatically deleted from the glasses. To sync:

1. Open the app and go to the Photos or Video page.
2. Tap "Sync."
3. Connect the glasses to Wi-Fi: Confirm the prompt to connect to the glasses' Wi-Fi hotspot (e.g., "XySmart_xxxxxx").
4. Join the glasses' Wi-Fi hotspot to start syncing content.

To delete photos/videos in the app: Tap the "Select" button, choose the desired files, and tap the "Delete" button.

Audio Recording

The K900 glasses feature audio recording. To record:

1. Turn on the glasses.
2. Open the companion app and navigate to the audio page. Tap the "Record" button.
3. To choose the recording duration (up to 120 minutes), tap the three-icon menu in the top-right corner of the app homepage, select "Audio Length," and choose your desired duration.

Translate

The S7 glasses offer real-time voice translation. To use this feature:

1. Turn on the glasses.
2. Open the companion app, go to the "Translate" page, and tap "Start Translation."
3. To select languages, tap the language dropdown menu at the top of the translation page. Choose the desired languages and tap "Start Translation" to begin translating both parties' voices in real-time.

Real-time Feedback: Translated text is audibly announced by the glasses (this can be enabled/disabled in app settings) and displayed on the app's translation page alongside the original text.

Cleaning

Store your glasses in the charging case when not in use to prevent damage. To clean:

• Use a damp cloth with mild soap; avoid solvents or alcohol.
• Do not use dirty or abrasive cloths, as they can damage the lenses.
• Do not rinse the glasses under running water.
• Gently wipe the lenses, camera, and nose bridge charging contacts.
• Dry the glasses thoroughly before placing them back in the case or wearing them.

Additional care and safety instructions are available in the Safety and Warranty Guide.

Water Resistance

The S7 glasses have an IPX4 water resistance rating, making them safe for light rain. If exposed to water, remove the glasses and dry them thoroughly. They are not suitable for immersion or prolonged exposure to water or other liquids. If wet, dry them and clean the charging area for any residue or debris.

The power switch is located on the top left side near the hinge.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.