INTELLI-RV 12V POWER MANAGEMENT SYSTEM
INSTALLATION GUIDE
P/No. PM300
Warnings
- Explosive gases. Prevent flames and sparks. Provide adequate ventilation during charging.
- Before charging, read the instructions.
- For indoor use. Do not expose to rain.
- For charging lead acid and LiFePO4 batteries ONLY (of the size & voltage specified in the specifications table).
- Always charge the battery on the correct voltage setting. Never set the charger to a higher voltage than the battery.
- Disconnect the 240V mains supply before making or breaking the connections to the battery.
- The battery charger must be plugged into an earthed socket outlet.
- Connection to supply mains is to be in accordance with National wiring rules.
- Do not attempt to charge non-rechargeable batteries.
- Never charge a frozen battery.
- If the AC cord is damaged, do not attempt to use. It must be replaced or repaired by a qualified person.
- Corrosive substances may escape from the battery during charging and damage delicate surfaces. Store and charge in a suitable area.
- This charger is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Young children should be supervised to ensure that they do not play with the appliance.
- If the recreational vehicle is to be put into storage without power, please turn off the BATTERY MASTER SWITCH. If the recreational vehicle is to be put into long term storage without power, disconnect ALL cabling from the battery.
Components and Parts
| Code Name | Model | Description | Qty | Part No. on drawing | Length |
|---|---|---|---|---|---|
| 1 | PM335 | 12V 30A Charger and 35Amp Power supply, 30A MPPT Solar controller | 1 | 11 | - |
| 2 | PMLCD | LCD Display T/S | 1 | 12 | - |
| 3 | PMWS200 (not supplied) | 200mm water sensor with 4.5m cable | 1 | 04 | 4.5m |
| 4 | PMWS400 (not supplied) | 400mm water sensor with 4.5m cable | 1 | 04 | 4.5m |
| PMLCDC | - | 5m Cable to suit PMLCD | 1 | - | 5m |
| PMBS | - | Battery sensor with 3m cable | 1 | - | 3m |
| PMTS | - | Temperature sensor with 5m cable | 1 | - | 5m |
| PMSW200 | - | 4.5m Cable to suit PMWS200 (not supplied) | 0 | - | 4.5m |
| PMAC | - | AC power cord, 1.5m, AUS | 1 | - | 1.5m |
Diagram Descriptions
Diagram 1 (PM335): Depicts the PM335 unit, a 12V 30A charger and 35A power supply with a 30A MPPT solar controller. The diagram shows various connection terminals, each labeled with a maximum current rating, such as 15A or 10A, indicating input and output capabilities for different circuits.
Diagram 2 (PMLCD): Shows the PMLCD unit, which is an LCD display designed for monitoring the power management system's status.
Diagram 3 (Water Tank Level Sensor - Not Supplied): Illustrates a probe-style sensor intended for installation in a water tank to measure liquid levels. This component is sold separately.
Diagram 4 (PMWS200): Displays the PMWS200, a 200mm water sensor with an attached 4.5m cable. This unit is designed for water level detection.
Diagram 5 (PMWS400): Shows the PMWS400, a 400mm water sensor with an attached 4.5m cable, also for water level detection.
Warranty Statement
This warranty is applicable only to products sold in Australia.
Brown & Watson International Pty Ltd, located at 1500 Ferntree Gully Road, Knoxfield, Vic., warrants that its products will be free from failures in material and workmanship for a period of one (1) year from the original purchase date, provided they are used under normal conditions. This warranty excludes ordinary wear and tear, abuse, product alteration, or damage caused by the consumer. Bulbs and lenses are also excluded.
To make a warranty claim, the consumer must return the product, at their own expense, to the original place of purchase or a nominated location. The original invoice, showing the date and place of purchase, and a written explanation of the claim must be provided.
Brown & Watson International Pty Ltd reserves the right to repair or replace products with minor failures. For major failures, the consumer is entitled to a replacement or refund, plus compensation for any reasonably foreseeable loss or damage. This warranty is in addition to other rights and remedies available under Australian State or Federal legislation.
Important Consumer Rights Note
Brown & Watson International Pty Ltd products come with guarantees that cannot be excluded under the Australian Consumer Law. Consumers are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. Consumers are also entitled to have goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.
Distribution Information
Australia:
Brown & Watson International Pty Ltd
Knoxfield, Victoria 3180
Telephone: (03) 9730 6000
Facsimile: (03) 9730 6050
National Toll Free: 1800 113 443
New Zealand:
Narva New Zealand Ltd
22-24 Olive Road
PO Box 12556 Penrose
Auckland, New Zealand
Telephone: (09) 525 4575
Facsimile: (09) 579 1192
