GIM4310-10 Brake Installation Drawing
Component Details
The drawing illustrates the GIM4310-10 brake installation, featuring multiple views of the component with detailed dimensions and thread specifications.
Top View Components:
- Top Flange (Upper View): Features 6-M2.5 threaded holes with a depth of 3mm. It is noted that screws should not be excessively long to prevent motor damage.
- Top Flange (Lower View): Also features 6-M2.5 threaded holes with a depth of 3mm, with the same caution regarding screw length.
Side View Components:
- Upper Component (Side View): Shows dimensions Ø53.037, Ø40, a length of 31, and a width of 19.
- Lower Component (Side View): Shows dimensions Ø53.044, Ø37, a length of 28, and a width of 19.
Detailed Views with Threads:
- Upper Right View: Depicts a component with Ø47.5, showing 3-M2.5 effective thread depth of 5mm and 3-M3 effective thread depth of 4mm.
- Lower Right View: Also shows a component with Ø47.5, indicating 3-M2.5 effective thread depth of 5mm and 3-M3 effective thread depth of 4mm.
Front Cover Omitted Section:
This section explains that the front cover is omitted when the motor mounting position can constrain the bearing, reducing installation height. This state is an unfinished structure before installation completion. Testing the motor without the front cover could lead to rotor dislodgement.
General Tolerances
General tolerances are provided according to ISO 2768-m(x):
| Size Range (x) | Tolerance (mm) |
|---|---|
| x ≤ 6 | ±0.1 |
| 6 < x ≤ 30 | ±0.2 |
| 30 < x ≤ 120 | ±0.3 |
| 120 < x ≤ 400 | ±0.5 |
| 400 < x ≤ 2000 | ±1.0 |
Drawing Information
Drawing Title: GIM4310-10 BRAKE INSTALLATION DRAWING
Scale: Not explicitly stated, but a scale bar is present.
