INNCOM DIRECT D-578 EDGE ROUTER
Honeywell's INNCOM Direct is an energy management system tailored to provide an all-in-one control and management for a hotel's guestroom and common area HVAC systems.
Out of the box, INNCOM Direct D578 Edge Router is an essential part of Honeywell's online HVAC solution designed to reduce energy usage in guestroom and common area, enabling hoteliers to reach sustainability goals faster. Additionally, INNCOM Direct provides the capability for portfolio management to optimize room and equipment performance to increase guest satisfaction and decrease operational costs.
The INNCOM Deep Mesh Network (DMN) is a reliable, redundant, secure wireless network for hotel properties, which offers easier installation, lower costs, and greater scalability than other such hospitality networks. Because DMN infrastructure is embedded in INNCOM thermostats, it provides a wireless mesh network that is self-forming and highly cost effective. This eliminates the need for multiple radios and densely populated networks of costly auxiliary routers and PAN coordinators that only support a limited number of rooms. A typical INNCOM DMN network for a limited service property needs just one edge router for up to 200 rooms. Compared to traditional networks, the highly efficient DMN architecture reduces costs for both installation and maintenance.
Unlike other Property Network Systems, which require extensive installation, cabling, and electrical power, the INNCOM DMN requires minimal installation effort since the network infrastructure is embedded in the thermostat. This mesh network also eliminates or greatly reduces the cabling and electrical power needed to install other systems.
FEATURES AND HIGHLIGHTS
- All-in-one system - both hardware and software
- Property wide - both guestrooms and common areas
- Occupancy and Scheduled Energy Savings
- No system engineering or commissioning experience needed.
PART NUMBERS
D-578 PART NUMBERS
| PART NUMBER | DESCRIPTION |
|---|---|
| D1-578-12 | D-578 Edge Router for INNControl Lite using the surface mount housing. Contains POE power module and optional 12 VDC power supply. |
ACCESSORIES PARTS
| PART NUMBER | DESCRIPTION |
|---|---|
| 04-8047.7B | 7' black CAT5E patch cable |
| 204-005 | 100-240 VA, 12 VDC 2 A power supply |
| 262-301 | US Style AC cable |
| 41-1139 | 4 Piece Screw #6-32 3/4 inches PHILIPS PAN HEAD Zn-PLATED |
| 62-9702 | CAT 5 UTP AWG24*4 PAIRS PVC JACKET COLOR: BLACK 8P8C 30UL=2438 ± 2 mm |
| 241-203 | 4 piece #6-32 3/4 Philips Pan Head |
Note: 204-007 is 204-005 + 262-301
DIMENSIONS
The device has the following dimensions: 4.72 inches (120 mm) in height, 4.92 inches (125 mm) in width, and 0.99 inches (25.2 mm) in depth.
It is designed for wall mounting, typically on a Standard Double Gang Junction Box (4x4).
SYSTEM OVERVIEW
The system overview illustrates the connectivity between various components in a hotel network. The diagram shows a NIAGARA GATEWAY connected via IP Ethernet to a Firewall and then to a REMOTE BUILDING MANAGER. The NIAGARA GATEWAY also connects to a D1-528 Thermostat via RF Network. The D-578 Edge Router is connected via IP Ethernet to a Network Switch. The D-578 Edge Router then connects to a D1-529 Thermostat and a D-X47 HVAC Controller via RF Network.
Legend:
- IP Ethernet: Indicates a wired network connection.
- RF Network: Indicates a wireless network connection.
DEEP MESH NETWORK OVERVIEW
The INNCOM Deep Mesh Network (DMN) is based on ZigBee (IEEE 802.15.4) and is designed to work with ZigBee Pro, ZigBee 2006, and 6LoWPAN standards. It supports INNCOM's integrated room automation system message bus, facilitating interoperability between RF, IR, and wired room devices. The network features multi-path packet routing for enhanced transport reliability and uses four AES 128 encryption channels (VLAN) for data security, handling 102 bytes of data payload per packet, including mesh, encryption, and authentication.
The network infrastructure is low-cost and embedded in thermostats and other room devices. Each powered node includes a 4 kb mailbox memory for use as a relay-buffer for battery-operated devices. The system incorporates intrusion detection and warning mechanisms against relay attacks. Devices are IP addressable, with the edge router delivering IP packets directly between hosts and devices. The DMN is designed for long life for battery-operated devices and includes patent-pending solutions for enhanced battery life in RF motion detectors. Authentication certificates are enforced at the edge router. The system supports room control protocols, enabling multi-vendor integration. RF network qualification is performed through packet accounting, data path capturing, and background noise tracking.
Edge router options include RF-to-Ethernet (PoE option), RF-to-USB, and RF-to-Set Top Box for Television control. The IPv6 edge router supports flat connectivity between devices and third-party applications like tablets, providing an IPv6-ready environment for future expansion and real-time data transmission.
PRODUCT SPECIFICATIONS
HARDWARE
| PARAMETER | SPECIFICATION |
|---|---|
| RF Data Rate | 250 kbps |
| Indoor RF Range | 100 ft |
| RF Transmit Power | 50 mW (+17 dBm) |
| RF Receive Sensitivity | 94.6 dBm |
| Frequency Band | 2.4 Ghz |
| Frequency Channels | 11-26 |
| Protocol | 802.15.4 |
| Network Topology | Deep Mesh |
| 802.15.4 ZigBee Frequency Channels | 11-26. Channels 15, 20, 25 and 26 are preferred |
| Supported Network IP Protocols | UDP, ICMP, DHCP |
| Network Connection | Supports 10/100 Mbps |
| Encryption | AES-128 |
ELECTRICAL
| PARAMETER | SPECIFICATION |
|---|---|
| Power Requirements | D578 can be powered with an external 12 VDC power supply using DC jack (J1). D578 is alternatively an IEEE 802.3af compliant powered device. The D578 is an IEEE class 2 device. Requires the 02-9499 PoE module connected to M1 of the D578 mainboard. |
| Supply Voltage | 12 VDC |
| Current Consumption | 200 mA, 100 mA RMS |
ENVIRONMENTAL SPECIFICATIONS
| PARAMETER | SPECIFICATION |
|---|---|
| Operating Temperature | 32 °F to 104 °F (0 °C to 40 °C) |
| Storage Temperature | 33 °F to 149 °F (1 °C to 65 °C) |
| Humidity | 15-99% RH noncondensing |
WEIGHT AND DIMENSIONS
| PARAMETER | SPECIFICATION |
|---|---|
| Dimensions | 4.72 inches x 4.92 inches x 0.99 inches (120 mm x 125 mm x 25.2 mm) |
| Mounting | Wall Mounted on Standard Double Gang Junction Box (4x4) |
| Shipping Weight | 0.304 lbs (0.138 kg) |
STANDARDS AND APPROVALS
- FCC ID: GTC201104TXR (FCC Part 15 subpart B and C class B)
- IC ID: 1609A-201104TXR
- Prop65
- 2011/65/EU: Hazardous substances (RoHS I + II), amended by (EU) 2015/863 (RoHS III)
BLINK PATTERNS OF D3 AND D4 LED'S AND ETHERNET JACK LED'S
ETHERNET JACK LED KEY
| POSITION/COLOR/STATE | MEANING |
|---|---|
| Left-Yellow LED OFF | 10 Mbps connection |
| Left-Yellow LED ON | 100 Mbps connection |
| Right-Green LED Blinking | Network connection active |
D3 AND D4 LED KEY FOR D-578
| POSITION/COLOR/STATE | D-578 |
|---|---|
| D3 Red, D4 Yellow alternately blink for 5 seconds | Power was just applied to the D-578. |
| D3 Red randomly blinks, D4 Yellow Rapid steady blink (5 blinks/second) | Yellow D4 rapid blink indicates the D-578 has connected to Niagara service (Inncom Direct hotel) or TermDMS. Red D3 LED blinks anytime a connected Room Gateway sends data. |
| D3 Red and D4 Yellow are OFF and never blinking | The D-578 is not powered, not loaded with software or is damaged. Verify the D-578 is powered via 12 VDC via 12 V power socket or via PoE network switch. |
| D3 Red OFF, D4 Yellow Blinks 4 times every 2 seconds | The D-578 is powered but has not yet connected to Niagara service (Inncom Direct hotel) or TermDMS. |
| D3 Red OFF D4 Yellow ON solid | The D-578 is in Ready to Teach mode. For the encrypted D-578, you must first place it into Ready to Teach mode by pressing the blue S1 button before sending its configuration from Niagara EasyOnBoard service (Inncom Direct hotel), DM_Workbench or EngINN. |
D-578 CONNECTORS, LEDS AND BUTTONS
The D-578 Edge Router features several connectors and indicators:
- FIRMWARE PROGRAMMING HEADER
- 12 VDC POWER JACK
- ETHERNET CONNECTOR
- D4 AND D3 LED's
- H4-NOT USED
- BLIND BUTTON
- OPTIONAL PoE (POWER OVER ETHERNET) BOARD
- The mainboard includes an STM32 32 bit MICROPROCESSOR.
- H5-NOT USED
- H2-NOT USED
The device also has external D-578 LEDS, specifically D3 & D4 LEDs.
By using this Honeywell literature, you agree that Honeywell will have no liability for any damages arising out of your use or modification to, the literature. You will defend and indemnify Honeywell, its affiliates and subsidiaries, from and against any liability, cost, or damages, including attorneys' fees, arising out of, or resulting from, any modification to the literature by you.
Honeywell | Building Automation
715 Peachtree Street, N.E., Atlanta, Georgia, 30308, United States
Website: buildings.honeywell.com
© 2024 Honeywell International Inc. 31-00718-01 | Rev. 06-24
