Robot Vacuum S10 User Manual

Safety Instructions

Read this manual carefully before use, and retain it for future reference.

This product is for floor cleaning in a home environment only. Do not use it outdoors, on non-floor surfaces, or in a commercial or industrial setting.

Usage Restrictions

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if supervised or instructed on safe use and hazards. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• The appliance is only to be used with the provided power supply unit.
• This appliance contains batteries only replaceable by skilled persons.
• Keep the cleaning brush out of reach of children.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not use the robot vacuum to clean any burning substances.
• Do not pick up the robot vacuum by its laser radar cover.
• Ensure the robot vacuum is turned off and the power adapter is unplugged before cleaning or maintenance.
• This robot vacuum is intended only for cleaning floors in a home environment. Do not use it outdoors (e.g., open balcony), on non-floor surfaces (e.g., sofa), or in commercial/industrial settings.
• Do not use the robot vacuum in areas suspended above ground level (e.g., loft, open balcony, furniture tops) unless a protective barrier is present.
• Do not use the robot vacuum at ambient temperatures above 35°C or below 0°C, or on floors with liquids or sticky substances.
• Pick up cables from the floor before use to prevent the robot from dragging them.
• Pick up fragile or loose items (e.g., vases, plastic bags) to prevent obstruction or damage.
• Do not place children, pets, or items on top of the robot vacuum while it is stationary or moving.
• Do not use the robot vacuum to clean carpets.
• Do not allow the robot vacuum to pick up hard or sharp objects (e.g., building materials, glass, nails).
• Do not spray liquid into the robot vacuum (ensure the 2-in-1 dust compartment with water tank is dry before reinstalling).
• Do not place the robot vacuum upside down (laser radar housing should never touch the ground).
• This product's laser radar meets the IEC 60825-1:2014 Standard for Class 1 laser product safety and does not produce hazardous laser radiation.
• Only use this product as directed in the user manual. Users are responsible for any loss or damage from improper use.
• For the detailed e-manual, visit www.mi.com/global/service/userguide.

Batteries and Charging

• WARNING: Do not use any third-party battery or charging dock. Use only with <BLJ24W200120P-V> power adapter.
• Do not attempt to disassemble, repair, or modify the battery or charging dock.
• Do not place the charging dock near a heat source.
• Do not use a wet cloth or wet hands to wipe or clean the dock's charging contacts.
• If the robot vacuum will not be used for an extended period, fully charge it, turn it off, and store it in a cool, dry place. Recharge at least once every 3 months to avoid over-discharging the battery.
• The lithium-ion battery pack contains environmentally hazardous substances. Before disposal, remove the battery pack and recycle it in accordance with local laws and regulations.
• When removing batteries, it is best to use them up and ensure the product is disconnected from power.
• Battery Removal Steps:
  1. Uninstall the screw on the bottom and remove the cover.
  2. Unplug the battery connector and remove the batteries. Do not damage the battery case to avoid injuries.
  3. Return the batteries to a professional recycling organization.

Product Overview

The robot vacuum comprises a charging dock, various sensors, control buttons, and a mop pad assembly for cleaning.

Charging Dock

Features a charging indicator that remains white when the robot vacuum is connected to power.

Robot Components

• Laser Distance Sensor: Enables navigation and mapping.
• Cover: Houses sensors and buttons.
• Button/Indicator: A multi-function button for power, cleaning control, and status indication.
• Collision Sensor: Detects physical contact with obstacles.
• IR Receiver Sensor: Receives signals, likely from the charging dock or remote.
• Left Wheel, Right Wheel: Facilitate movement and steering.
• Brush Cover: Protects the main cleaning brush.
• Brush: The primary brush that sweeps debris.
• Battery Pack: Provides power to the robot.
• Side Brush: Sweeps debris from corners and edges towards the main brush.
• Cliff Sensor: Prevents the robot from falling down stairs or ledges.

Indicator Status Descriptions

• White: Working normally.
• Slowly blinking white: In charging.
• Blinking white: Returning to charge or firmware is upgrading.
• Yellow: Wi-Fi disconnected.
• Blinking yellow: Error state.
• Off: Shutdown or in sleep mode.

Before Use

Prepare the robot vacuum and connect it to your smart home system for optimal operation.

Removal and Installation

• Remove the protective strips from both sides of the robot vacuum.
• Attach the side brush to its designated position. Proper installation is confirmed by a "click" sound.
• Diagram Description: Illustrates the side brush being attached to the robot vacuum, with a note to listen for a "click" sound for proper installation. Protective strips on the robot's sides are to be removed.

Charging Dock Setup

• Remove the protective film from the charging dock.
• Place the charging dock against a wall and connect the power adapter.
• Place the robot vacuum onto the charging dock to initiate charging.
• Diagram Description: Shows the recommended placement of the charging dock against a wall, with required clearance zones: 0.5 meters on the left and right sides, and 1.5 meters in front.

Connecting with Mi Home/Xiaomi Home App

This product integrates with the Mi Home/Xiaomi Home app for device control and smart home interaction.

• Scan the provided QR code to download and install the app. If the app is already installed, you will be directed to the connection setup page. Alternatively, search for "Mi Home/Xiaomi Home" in your app store.
• [QR code for Mi Home/Xiaomi Home app download]
• Open the Mi Home/Xiaomi Home app, tap "+" in the upper right corner, and follow the on-screen prompts to add your device.
• Note: The app is referred to as Xiaomi Home app in Europe (excluding Russia). The app name displayed on your device should be considered the default.
• For iOS devices, connect to the robot vacuum's hotspot named "ai-vacuum-v17_miapXXXX" as instructed within the app.

Wi-Fi Reset

With the robot vacuum turned on, press and hold the [power button] and [return to charge button] simultaneously for seven seconds. A voice prompt confirms a successful Wi-Fi reset.

System Reset

Press and hold the [power button] for five seconds until a "beep" is heard. Then, press and hold the [return to charge button] for another five seconds until a voice prompt is received. This action restarts the robot vacuum and restores settings like scheduled cleaning and Wi-Fi configurations to their factory defaults.

How to Use

Operate the robot vacuum for effective cleaning tasks.

Start Vacuuming & Mopping

1. Remove the 2-in-1 dust compartment with water tank. Open the plug, fill with clean water, and securely refasten the plug. Install the compartment back into the robot vacuum by sliding it in the indicated direction until it clicks firmly.
2. To use the vacuuming & mopping function, first dampen the mop pad, wring it out, and attach it to the mop pad holder. Slide the mop pad holder horizontally onto the bottom of the robot vacuum until it clicks into place.
3. Press the [start/pause button] to begin vacuuming and mopping.

Cautions:

• Remove the 2-in-1 dust compartment with water tank before adding water.
• Do not add liquids such as hot water, detergent, or disinfectant, as this may damage the robot vacuum.
• Water stains may be present in the 2-in-1 dust compartment due to production testing; this is normal.
• After mopping, promptly remove the 2-in-1 dust compartment and empty any residual water. Clean and dry the mop pad to prevent odor and mildew.
• While the robot vacuum is operating, configure virtual walls or restricted areas for carpeted zones to prevent the robot from becoming entangled.

If only vacuuming is required, remove the mop pad holder by pressing the clips and pulling it outwards.

Pausing Operation

When the robot vacuum is running, press any button to pause. Press the [start/pause button] again to resume cleaning. The robot vacuum will enter sleep mode after being paused or in standby mode for five minutes. Press any button to wake it up.

Adding Water or Cleaning the Mop Pad

Pause the robot vacuum, then remove the 2-in-1 dust compartment with water tank to add water or clean the mop pad. Reinstall the compartment and press the [start/pause button] to resume the cleaning task.

Docking & Charging

Press the [start/pause button] to pause the current task, then press the [return to charge button] to send the robot vacuum back to the charging dock. If the robot vacuum is in standby mode and not connected to the charging dock, pressing the [return to charge button] will initiate docking. The robot vacuum will automatically return to the dock to charge upon task completion or when the battery level is critically low.

DND Mode (Do Not Disturb)

In Do Not Disturb (DND) mode, the robot vacuum will not resume cleanup, perform scheduled cleanups, or play voice prompts. The indicator light turns off after one minute of charging. DND mode can be enabled or disabled via the app.

Note: Consult the app for additional features such as Clean Here, Resume Cleanup, Scheduled Cleanup, and Virtual Walls. For first-time use, follow in-app prompts for quick map creation. To ensure accurate mapping, clear obstacles from the floor and ensure the robot starts from the charging dock. If the robot may get stuck or scratch furniture in certain areas, use the app to set restricted areas to prevent it from entering those zones.

Care & Maintenance

Regular care and maintenance are essential for optimal performance and longevity.

Brush and Side Brush Maintenance

1. Remove the side brush.
2. Press and hold the clips to release the brush cover, then remove the main brush and its bearing.
3. Use the provided cleaning brush to clean the main brush, cutting away any entangled hair and removing dirt and debris.
4. Diagram Description: Illustrates the process of removing the side brush, brush cover, and main brush. Visual cues indicate cutting hair and removing dirt/debris from the main brush.

Maintenance and Replacement Frequency

Notes: Refer to the labels on the water tank and mop pad holder for cleaning and maintenance of the 2-in-1 dust compartment and mop pad assembly. Clean the cliff sensor every three months using a soft cloth. Consult the table for recommended accessory replacement intervals to maintain optimal cleaning results.

Specifications

Robot Vacuum

Under normal use conditions, this equipment should be kept a separation distance of at least 20 cm between the antenna and the user's body.

Charging Dock

Power Adapter

Regulatory Compliance Information

EU Declaration of Conformity

Xiaomi Communications Co., Ltd. declares that the radio equipment type B106GL complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: http://www.mi.com/global/service/support/declaration.html.

WEEE Disposal and Recycling Information

Products bearing this symbol are waste electrical and electronic equipment (WEEE directive 2012/19/EU). Do not mix with unsorted household waste. Protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

Warranty Notice

This warranty grants specific rights, and you may have other rights conveyed by the laws of your country, province, or state. Xiaomi does not exclude, limit, or suspend other rights you may have.

Limited Product Warranty

Xiaomi warrants that the Products are free from defects in materials and workmanship under normal use and in accordance with the respective Product user manual, during the Warranty Period. The duration and conditions related to the legal warranties are provided by respective local laws. For more information about the consumer warranty benefits, please refer to Xiaomi's official website: https://www.mi.com/en/service/warranty/.

Xiaomi is not liable for damages arising from non-compliance with the instructions related to the use of the Product.

Remedies

If a hardware defect is found and a valid claim is received by Xiaomi within the Warranty Period, Xiaomi will either (1) repair the product at no charge, (2) replace the product, or (3) refund the product, excluding potential shipping costs.

How to Obtain Warranty Service

To obtain warranty service, you must deliver the Product, in its original packaging or similar packaging providing an equal degree of product protection, to the address specified by Xiaomi. Except to the extent prohibited by applicable law, Xiaomi may require you to present proofs or proof of purchase and/or comply with registration requirements before receiving warranty service.

Exclusions and Limitations

Unless otherwise stipulated by Xiaomi, this Limited Warranty applies only to the Product manufactured by or for Xiaomi and identifiable by Xiaomi trademarks. The Limited Warranty does not apply to any (a) damage due to acts of nature; (b) negligence; (c) commercial use; (d) alterations or modifications; (e) damage caused by use with non-Xiaomi products; (f) damage caused by accident, abuse or misuse; (g) damage caused by operating the Product outside permitted uses or with improper voltage/power supply; or (h) damage caused by service performed by non-Xiaomi representatives. It is your responsibility to backup any data; Xiaomi is not responsible for such damage or loss during service.

No Xiaomi reseller, agent, or employee is authorized to make any modification to this Limited Warranty. If any term is held to be illegal or unenforceable, the legality or enforceability of the remaining terms shall not be affected. After-sales services shall be limited to the country or region of original purchase.

Implied Warranties

Except to the extent prohibited by applicable law, all implied warranties (including warranties of merchantability and fitness for a particular purpose) will have a limited duration up to the maximum duration of this limited warranty. Some jurisdictions do not allow limitations on the duration of an implied warranty, so the above limitation or exclusion may not apply to you.

Damage Limitation

Except to the extent prohibited by applicable law, Xiaomi shall not be liable for any damages caused by accidents, indirect, special or consequential damages, including but not limited to loss of profits, revenue or data, even if Xiaomi has been informed of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of special, indirect, or consequential damages, so the above limitation or exclusion may not apply to you.

Xiaomi Contacts

For customers, please visit the website: https://www.mi.com/en/service/warranty/. The contact person for after-sale service may be any person in Xiaomi's authorized service network, authorized distributors, or the final vendor.