La Crosse Technology 10-Inch Atomic Wall Clock

Care and Maintenance

Always purchase the correct size and grade of battery most suitable for intended use.
Clean the battery contacts and also those of your clock prior to battery installation.
Ensure the battery is installed with correct polarity (+ and -).
Remove battery from your clock when it is not used for an extended period of time.
Promptly remove an expired battery.

Warranty and Support

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship.

Before returning a product, please contact La Crosse Technology friendly customer support with questions or visit their online help.

Phone: 1-608-782-1610

Online: bit.ly/404-54667_support

Scan for support information

WARNING: This product can expose you to chemicals including styrene, which is known in the State of California to cause cancer. For more information go to: www.p65warnings.ca.gov/

Product Information

Model: 404-54667

DC: 062921

For information about WWVB, Atomic Time Signal visit: bit.ly/AtomicTime

Power Up

Select Time Zone and DST settings.
Insert 1 AA battery into the Battery Compartment.
The hands will move to the 12 o'clock position and search for the WWVB Atomic Time Signal for up to 8 minutes.
- If no signal, after 8-10 minutes, clock will run from 12:00.
- Clock will continue to search for the WWVB Atomic Time Signal. Allow up to 5 nights for the clock to receive this transmission.
For the best reception, place the clock on an exterior wall near a window with the front or back of it facing Fort Collins, CO.

Watch the setup video: bit.ly/wallclock_setup

Note: In certain areas, this clock may not be able to receive the WWVB reception due to signal strength or interference. In this case, your clock can be set manually until the Atomic Time Signal can be received.

Manual Set Time

Set Time:

Hold SET for 3 seconds to manually set your time.
- Press and hold SET again to move hands quickly.
- Press and release SET to move hands forward step by step.

Note: The Atomic Time Signal will override your manual setting if the transmission is received in the future.

Reset Button

If the clock does not respond when trying to manually set your time, press the RESET button one time.
The hands will move to the 12 o'clock position and begin searching for the WWVB Signal again.

Let's Be Social!

Ask questions, watch detailed setup videos, and provide feedback on our social media outlets!

[Facebook]
[Instagram]
[Twitter]
[YouTube]

Specifications

Battery Requirements: 1 AA (IEC LR6) required in movement. Battery sold separately.

Battery Life: 12 months

	La Crosse 513-149 Digital Atomic Wall Clock Instruction Manual Comprehensive instruction manual for the La Crosse 513-149 Digital Atomic Wall Clock, covering setup, features, time setting, alarms, temperature display, and maintenance.
	La Crosse Technology 14" Atomic Wall Clock WT-3143Ax1 User Manual Comprehensive guide for the La Crosse Technology 14" Atomic Wall Clock (Model WT-3143Ax1), covering setup, power up, manual time setting, battery replacement, warranty, and care instructions.
	La Crosse Technology 21" Indoor/Outdoor Atomic Wall Clock User Manual User manual and specifications for the La Crosse Technology 21-inch Indoor/Outdoor Atomic Wall Clock (Model 433-29917), including setup, maintenance, warranty, and technical details.
	La Crosse Technology Curved Digital Atomic Wall Clock with Moon Phase Setup Guide Comprehensive setup guide and specifications for the La Crosse Technology Curved Digital Atomic Wall Clock (Model BBB86118v3) with outdoor sensor (Model TX141-Bv3), including instructions for power up, atomic time, settings, alarms, and troubleshooting.
	La Crosse Technology 16" Atomic Wall Clock WT-3161WHx1 - Setup, Warranty & Specifications Comprehensive guide for the La Crosse Technology 16" Atomic Wall Clock (Model WT-3161WHx1), including warranty information, battery replacement, setup instructions, specifications, and troubleshooting tips.
	La Crosse Technology WT-3129S 12" Atomic Wall Clock Instruction Manual Instruction manual for the La Crosse Technology WT-3129S 12" Atomic Wall Clock, covering setup, positioning, manual time setting, troubleshooting, DST, signal search, FAQs, care, and warranty.
	La Crosse Technology Atomic Digital Office Clock User Manual Comprehensive user manual for the La Crosse Technology Atomic Digital Office Clock (Model 513-1419BLv3). Provides detailed instructions on setup, time setting, alarm functions, display modes, and maintenance. Includes specifications and warranty information.
	La Crosse Technology 617-249v2 1.8" LED Atomic Clock User Manual Comprehensive user manual for the La Crosse Technology 617-249v2 1.8" LED Atomic Clock with Dual Alarms and USB Charging. Learn about setup, settings, alarms, atomic time signal, battery backup, and specifications.