Please read this manual carefully and keep it for future reference. If you have any questions or issues, please contact our customer support team by email at support@mirocohome.com. How to use Caution 1. Choose an appropriate whisk and assemble it onto the tip on the base of the frothing pitcher 2. Pour milk into the frothing pitcher no higher
MIROCO MILK FROTHER. User Guide. MI-MF001 www.mirocohome.com. E-mail: ... Please read this manual carefully and keep it for future reference.
Thank you for choosing the Miroco Milk Frother. Please read this manual carefully and keep it for future reference. If you have any questions or issues, please contact our customer support team by email at support@mirocohome.com. How to use Caution 1. Choose an appropriate whisk and assemble it onto the tip on the base of the frothing pitcher 2.
MI-MF001 www.mirocohome.com NORTH AMERICA E-mail: support@mirocohome.com MIROCO MILK FROTHER User Guide 1 2 3 4 5 1. Transparent Lid 2. Stainless Steel Frothing Pitcher 3. LED Indicator 4. Power Button 5. Power Base 6. 2 x Whisk (Heating) 7. 2 x Whisk (Frothing ) Thank you for choosing the Miroco Milk Frother. Please read this manual carefully and keep it for future reference. If you have any questions or issues, please contact our customer support team by email at support@mirocohome.com. How to use Whisk Function Max Capacity Time Temperature Whisk (Frothing) Frothing cold milk Frothing & Heating 115 ml / 3.9 oz 115 ml / 3.9 oz 60-65s 120-160s / 65°C / 149°F 6 Whisk (Heating) Heating (with a small amount of froth) 240 ml / 8.1 oz 210-250s 65°C / 149°F 1. Choose an appropriate whisk and 2. Pour milk into the frothing pitcher no higher assemble it onto the tip on the base of or lower than the maximum and minimum 7 the frothing pitcher markings inside KLIM 3. Cap on the lid. Refer to table below to operate the device. Functions Heating & Frothing / Heating Milk Frothing Cold Milk LED Indicator Status When the Device is Working Press the Power Button, the red and blue LED will light up to start heating & frothing milk Press and hold the Power Button for 1 to 2 seconds, the blue LED will light up to start frothing cold milk LED Indicator Status When the Process Is Complete The blue LED turns off and the red LED keeps flashing The blue LED turns off and the red LED keeps flashing Caution 1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 2. Do not disassemble the unit. 3. Keep away from heat, moisture, and corrosive substances. 4. Do not remove the power cable with wet hands as it may cause an electric shock. 5. Use whole milk (fat content > 3.0%) for the best results.Adobe Illustrator CC 2015 (Windows) Adobe PDF library 15.00