SC18MLX MBP Compressor R404A/R507 220V 50Hz
AI376135611517en-010101 SC18MLX MBP Compressor R404A/R507 220-240V 50Hz
General Code number Approvals Compressors on pallet
Application Application Frequency Evaporating temperature Voltage range Max. condensing temperature continuous (short) Max. winding temperature continuous (short)
Cooling requirements Frequency Application 32°C 38°C 43°C Remarks on application:
104L2139 EN 60335-2-34
80
MBP
Hz
50
60
°C -23.3 to 7.2
V 198 - 254
°C 50 (60)
°C 125 (135)
Hz
50
60
LBP MBP HBP LBP MBP HBP
F2 F2
S = Static cooling normally sufficient O = Oil cooling F1 = Fan cooling 1.5 m/s
(compressor compartment temperature equal to ambient temperature) F2 = Fan cooling 3.0 m/s necessary SG = Suction gas cooling normally sufficent = not applicable in this area
Motor Motor type LRA (rated after 4 sec. UL984), HST | LST Cut in Current, HST | LST Resistance, main | start winding (25°C)
CSR
A
23.6
A
23.6
3.4
14.4
Design Displacement Oil quantity (type) Maximum refrigerant charge Free gas volume in compressor Weight without electrical equipment
cm3
17.68
cm3
600 (polyolester)
g
1300
cm3
1460
kg
14.0
Dimensions Height
Suction connector Process connector Discharge connector Oil cooler connector Connector tolerance Remarks:
mm A
219
B
213
B1
193
B2
110
location/I.D. mm | angle C
10.2 | 37°
material | comment Cu-plated steel | Al cap
location/I.D. mm | angle D
6.2 | 37°
material | comment Cu-plated steel | Al cap
location/I.D. mm | angle E
6.2 | 37°
material | comment Cu-plated steel | Al cap
location/I.D. mm | angle F
material | comment
I.D. mm
±0.09
Dec 2011
Manufactured by Secop for Danfoss - DEHC.ED.400.J3.02 / 520N0256
1/2
EN 12900 Household (CECOMAF)
220V, 50Hz, fan cooling F2
Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0
5 7.2 10 15 20
Capacity in W
831 968 1210 1497 1712 1832 2220 2665 2880
Power cons. in W
676 722 790 860 907 931 1004 1080 1114
Current cons. in A
3.57 3.76 4.07 4.40 4.63 4.75 5.12 5.51 5.69
COP in W/W
1.23 1.34 1.53 1.74 1.89 1.97 2.21 2.47 2.59
ASHRAE MBP
220V, 50Hz, fan cooling F2
Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0
5 7.2 10 15 20
Capacity in W
762 887 1111 1380 1584 1698 2072 2507 2720
Power cons. in W
703 757 838 920 975 1003 1087 1173 1212
Current cons. in A
3.70 3.92 4.27 4.65 4.91 5.04 5.46 5.89 6.09
COP in W/W
1.08 1.17 1.33 1.50 1.62 1.69 1.91 2.14 2.24
Accessories for SC18MLX
Figure
Sarting device
470 mm cable length
550 mm cable length a3
650 mm cable length
1000 mm cable length
Cover
b
Starting relay
6.3 mm spade connectors a2
Start. capacitor 80 µF 6.3 mm spade connectors c
Run capacitor 10 µF 6.3 mm spade connectors e
Cord relief
d
Code number 117-7012 117-7027 117-7046 117-7040 103N2009
Components of starting device
103N1004
Test conditions
EN 12900/CECOMAF
Condensing temperature
45°C
Ambient temperature
32°C
Suction gas temperature
32°C
Liquid temperature
no subcooling
ASHRAE MBP 54.4°C 35°C 35°C 46.1°C
Mounting accessories Bolt joint for one comp. Bolt joint in quantities Snap-on in quantities
Ø: 16 mm Ø: 16 mm Ø: 16 mm
Code number 118-1917 118-1918 118-1919
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2/2
Manufactured by Secop for Danfoss - DEHC.ED.400.J3.02 / 520N0256
Dec 2011
Danfoss A/S