Intellinet 8-Port Gigabit Ethernet PoE+ Switch Instructions

Introduction

This guide presents the basic steps to set up and operate this device. For specifications, visit intellinet-network.com. Register your product at register.intellinet-network.com/r/561204 or scan the QR code on the cover.

LED Indicators

The LED indicators make monitoring and troubleshooting easier. If a status LED doesn’t indicate a link or activity, check the corresponding device for proper setup and operation.

Ports

All ports on the switch support Auto-MDI/MDI-X functionality, so you can use straight or crossover UTP/STP cables to connect the RJ45 ports to PCs, routers, hubs, other switches, etc. Cat5/5e/6 UTP/STP cables provide optimal performance; if a status LED doesn’t indicate a link, check the corresponding device for proper setup and operation.

Ports 1 – 8: 10/100/1000 Mbps ports, IEEE 802.3af/at compliant, providing a maximum of 30 watts to connected PoE devices. The total PoE budget for this switch is 60 watts, the per-port average power distribution is 7.5 watts.

Port 1: The designated uplink port can be used the same way as any of the other ports, however, when port isolation (VLAN mode 1 or 2) is active, this port remains accessible from all other ports.

Diagram Description: An 8-port switch with an uplink port, connected to various devices like PCs, a router, and a server.

Power

Use the included power adapter to connect the receptacle on the back of the switch to a power outlet, and confirm that the Power LED lights.

VLAN Mode

The Intellinet 8-Port Gigabit PoE+ Switch (561204) features port isolation, also referred to as "Private VLAN". This function isolates all ports from each other and only allows access to the uplink port. This is useful, for example, if a private VLAN is a hotel where each room or apartment has a network port for Internet access. All ports can access the Internet, but they cannot access each other.

Diagram Description: Illustrates VLAN modes. In 'Normal' mode, all devices are interconnected. In 'VLAN1' and 'VLAN2' modes, devices connected to ports 2-8 are isolated from each other but can communicate with the device connected to the uplink port (port 1).

Placement

Prior to use, place/position the switch:

• On a level surface that can support the weight of the switch (and any other items that need to be considered);
• With a minimum of 25 mm (approx. 1") of clearance on the top and sides for adequate ventilation;
• Away from electric-noise sources: radios, transmitters, broadband amplifiers, etc.;
• Where it cannot be affected by excessive moisture.

Warranty and Regulatory Information

For warranty information, visit intellinet-network.com.

Warranty in Mexico: Intellinet Network Solutions provides a warranty for its products. Contact IC Intracom México, S.A.P.I. de C.V. for details.

Disposal of Waste Electrical & Electronic Equipment (WEEE): This symbol indicates that the product should not be treated as household waste. Dispose of this product at your local point of sale or recycling pickup point in accordance with EU Directive 2012/19/EU.

Regulatory Statements: This equipment complies with FCC Class B standards and CE/UKCA regulations (EMC and Electrical Safety Directives). Declaration of Conformity is available at support.intellinet-network.com/barcode/561204.