Special EVO MY13 Parts Manual-GA5071135 Rev2 Special Evolution MY13 Parts Manual
For further information about any of the products shown please visit - www.goldacres.com.au.
© Goldacres Trading 2015 This publication and all designs are copyright.
No part, products or designs may be reproduced by any process except in accordance with the Copyright act 1968.
All information in this operator's manual is based on the latest product information available at the time of printing. The policy of Goldacres is one of continuous improvement and as such, Goldacres reserve the right to alter any specifications and designs without notice and without incurring any obligation regarding such changes.
No part of this manual may be reproduced without written permission from Goldacres. All photographs and technical information remain the property of Goldacres.
Goldacres Trading Pty Ltd 3 Morang Crescent Mitchell Park Vic 3355
Ph: 03 5342 6399 Fax: 03 5342 6308
Revision number: 2.0 10-06-2015 Valid for machine 201000 -
Part #: GA5071135
GOLDACRES - RESELLER TERMS AND CONDITIONS OF SALE
Goldacres Goods are only available for purchase upon the terms and conditions set out below.
Interpretation 1. In terms and conditions: (1) "Goldacres" means Goldacres Trading Pty. Ltd.A.C.N. 061 306 732 trading as Goldacres Agricultural Equipment (its successors and
assigns) which is the seller of the Goods; (2) "Purchaser" means the purchaser of the Goods; (3) "Goods" means the products and, if any, the services sold or provided by Goldacres to the Purchaser; (4) "GST Act" and "GST" are given the meanings referred to in a New Tax System (Goods and Services Tax) Act 1999. (5) "PPSA" means the Personal Property Securities Act 2009 (Clth) (as amended); (6) Nothing in these terms and conditions shall be read or applied so as to exclude, restrict or modify or have the effect of excluding,
restricting or modifying, any condition, warranty, guarantee, right or remedy implied by law (including the Competition and Consumer Act 2010) and which by law cannot be excluded, restricted or modified. General 2. (1) The Goods and all other products or services provided by Goldacres are provided subject to these terms and conditions.These terms and conditions and any terms and conditions incorporated herein by virtue of clause 3 hereto shall prevail over all other terms and conditions of the Purchaser or otherwise to the extent of any inconsistency. (2) These terms and conditions may not be modified or amended without the expressed written consent of Goldacres endorsed by the Managing Director of Goldacres Trading P/L. Additional Terms and Conditions 3. From time to time Goldacres may provide additional or extended warranties in respect of certain goods and/or services.Where such additional or extended warranties are provided to a Purchaser in writing they will be incorporated into these terms and conditions provided that in the event of any inconsistency between these terms and conditions and the terms of any additional or extended warranty, the provisions of the additional or extended warranty shall prevail. Goldacres quotations. 4. Unless previously withdrawn, Goldacres quotations are open for acceptance within the period stated therein or, when no period is stated, with 14 days only of the quotation date. Goldacres reserves the right to refuse any order based on any quotation within 7 days of receipt of the order. Packing 5. The cost of any special packing and packing materials used in relation to the Goods shall be at the Purchaser's expense notwithstanding that such cost may have been omitted from any quotation. Shortage 6. The Purchaser waives any claim for shortage of any Goods delivered if a claim in respect thereof has not been lodged with Goldacres within (7) seven days from the date of receipt of the Goods by the Purchaser. Specifications, etc: Catalogues, etc: Quantities 7. All specifications, (including but not limited to: drawings, particulars of weights, volumes, capacities, dimensions, load factors) are approximate only and any deviation shall not be taken to vitiate any contract with Goldacres or form any claim against Goldacres.The descriptions, illustrations, and performances contained in catalogues, price lists and other advertising matter do not form part of the contract of sale of the Goods.Where specifications, drawings or other particulars are supplied by the Purchaser, Goldacres' price is made on estimates of quantities required. Should there be any adjustments in quantities above or below the quantities estimated by Goldacres and set out in a quotation, then any such increase or decrease shall be adjusted on a unit rate basis according to unit prices set out in the quotation. Performance, Capacities, Chemicals, Liquids,Application Methods, Environmental Effects 8. Any performance, volumes, and/or capacity figures given by Goldacres are estimates only. Goldacres shall be under no liability for damages for failure to obtain such figures unless specifically guaranteed in writing and any such written guarantee shall be subject to the recognised tolerances applicable to such figures.The suitability of chemicals and other liquids for any application and the application methods and the environmental effects shall be the sole decision and responsibility of the Purchaser and the user of the Goods. Goldacres gives no warranty as to the suitability of any chemicals or other liquids for any application, nor the application methods nor the environmental effects, which may result from the use of the Goods. Goldacres shall be under no liability for damages arising out of the use of any chemicals, liquids, or mixtures in the Goods nor for any application, nor for the application methods nor for the environmental effects, which may result from the use of the Goods. Delivery/Service Times 9. The delivery times and service times made known to the Purchaser are estimates only and Goldacres shall not be liable for late delivery, non-delivery or delay and under no circumstances shall Goldacres be liable for any loss, damage or delay occasioned by the Purchaser or its customers arising from the late or non-delivery or late installation of the Goods. Loss or damage in transit 10. Goldacres is not responsible for any loss or damage to Goods in transit. Goldacres shall render the Purchaser such assistance as may be necessary to press claims on carriers provided that the Purchaser shall have notified Goldacres and the carriers immediately the loss or damage is discovered on receipt of Goods and shall lodge a claim on the carrier within three days of the date of receipt of the Goods. Insurance of Goods in transit is the responsibility of the Purchaser. Limit of Liability 11. (1) Goldacres liability for Goods manufactured by it is limited to: (a) where the law implies consumer guarantees into these terms and conditions pursuant to Part 3.2 Division 1 of Schedule 2 to the Competition and Consumer Act 2010 (C'th") ("consumer guarantees") which cannot be excluded and Goldacres breaches a consumer guarantee, the loss and damage the Purchaser is entitled to at law which cannot be excluded by these terms and conditions; and, in all other cases (b) making good any defects by repairing the same or at Goldacres option by replacement within a period not exceeding either 1000 hours or twelve calendar months, whichever comes first, after the Goods have been dispatched provided that: (i) the defects have arisen solely from faulty materials or workmanship; (ii) the Goods have not received maltreatment inattention or interference; (iii) accessories of any kind used by the Purchaser are manufactured or approved by Goldacres; (iv) where applicable, the seals on the Goods remain unbroken; (v) there has been no improper adjustment, calibration or operation; (vi) the use of accessories including consumables, hardware or software (not manufactured by Goldacres) has been approved in writing by Goldacres; (vii) no contamination or leakage has been caused or induced; (viii) any modification to the Goods have been authorised in writing by Goldacres; (ix) there has been no inadequate or incorrect use, storage, handling or application of the Goods; (x) there has been no use or operation of the Goods outside of the physical, electrical or environmental specifications of the Goods; (xi) there has been no inadequate or incorrect site preparations; (xii) there has been no inadequate or improper maintenance of the Goods; (xiii) it has not been caused by fair wear and tear; and (xiv) firstly the Goods have been thoroughly inspected and any damage (from whatever cause) to the Goods (and in particular the structure, welding, seams, bolts, booms) has been repaired prior to the Goods being operated, used driven or moved and on each occasion the tanks are filled; and (xv) there has been no failure to comply with the requirements of all present or future laws or regulations relating to the Goods and/or the use and/or the operation of the Goods; and (xvi) there has been no failure to maintain a record of hours of operation (which record shall contain full details of all inspections, repairs and maintenance) and produce same to Goldacres at the time of the claim; (xvii) the defective Goods or any damaged part of the Goods are promptly returned free of cost to Goldacres or a representative of Goldacres; (xviii)all warranty related repairs have been carried out with the prior authorisation of Goldacres; (2) If Goods or any part thereof are not manufactured by Goldacres, in particular engines, engine accessories, transmissions, transfer cases, differentials, tyres, tubes, batteries, radios and UHFs, the guarantee of the manufacturer thereof shall be accepted by the Purchaser and is the only guarantee given to the Purchaser in respect of the Goods or that part provided always that this clause does not seek to exclude the consumer guarantees; (3) In the case of hydraulic systems, Goldacres shall replace defective parts in accordance with clause 11(1) of these conditions, provided that the failure of the part was not related to contamination within the system, Goldacres shall not be liable for labour in the case of repairing hydraulic system defects; (4) Goldacres will not accept liability for damage attributed to fair wear and tear including but not limited to fair wear and tear to nozzles, chains, belts, filters, brake pads, polyethylene bushes and liquid pump valves, valve O-rings, diaphragms and seals; (5) Goldacres shall not be liable for and the Purchaser releases Goldacres from any claims in respect of faulty or defective design of any Goods supplied unless such a design has been wholly prepared by Goldacres and the responsibility for any claim has been specifically accepted by Goldacres in writing and in any event Goldacres liability hereunder shall be strictly limited to the replacement of defective parts in accordance with paragraph 11(1) of these conditions provided always that this clause does not seek to exclude the consumer guarantees; (6) Except as provided herein, all express and implied warranties, guarantees and conditions under statute or general law as to the merchantability, description, quality, suitability or fitness of the Goods for any purpose or as to design, assembly, installation, materials or workmanship or otherwise are hereby expressly excluded and Goldacres shall not be liable for physical or financial injury, loss or damage or for consequential loss or damage of any kind arising out of the supply, layout, assembly, installation or operation of the Goods or arising out of Goldacres negligence or in any other way whatsoever; (7) The benefit of any warranty provided under these terms and conditions shall only be available to the Purchaser and shall not be transferable by the Purchaser; (8) The warranties provided under these terms and conditions do not extend to second hand or used Goods that may be sold by Goldacres. 12. Goldacres liability for breach of a consumer guarantee is hereby limited (in the case of goods and services not used for personal, domestic or household purposes) to: (1) in the case of Goods, any one or more of the following: (a) the replacement of the Goods or the supply of equivalent Goods; (b) the repair of the Goods; (c) the payment of the cost of replacing the Goods or acquiring the equivalent Goods; (d) the payment of having the Goods repaired; or (2) in the case of services; (a) the supplying of the services again; or (b) the payment of the cost of having the services supplied again. Prices 13. (1) Unless otherwise stated in writing by Goldacres, all prices quoted by Goldacres are inclusive of GST for supplies within Australia and exclusive of GST for exports outside of Australia. Prices quoted are those ruling at the time of quotation or the date the price is given and are based on rates of freight, insurance, customs, duties, taxes, exchange, shipping expenses, sorting and stacking charges, cartage, cost of materials and other charges affecting the cost of production ruling on that date and any alterations thereto either before acceptance of or during currency of the contract shall be to the Purchaser's account. (2) For the purpose of 38-185 of the GST Act, the day upon which the seller gives the invoice for the supply shall be the date of the invoice. Payment 14. (1) The purchase price in relation to the Goods and the cost of the service shall be payable without deduction and or set off and payment thereof shall be made on or before the thirteenth day of the month following the delivery of the Goods or performance of the
services unless other terms of payment are expressly stated in writing. (2) A decreasing or increasing adjustment and or the issuing of an adjustment note, pursuant to Division 21 and Division 29-C of the GST
Act, shall not, in any way, constitute a release, waiver, and or forgiveness of the debt incurred by the Purchaser. Interest on overdue payments 15. If Goldacres is not paid for any Goods or services on the due date specified in this agreement without prejudice to any other right or
remedy, all outstanding money shall bear interest at the rate set, pursuant to the Penalty Interest Rates Act,Victoria, 1986, as such money, together with interest shall be recoverable forthwith from the Purchaser. Rights in relation to Goods. 16. (1) Title to the Goods supplied by Goldacres to the Purchaser shall remain with Goldacres until the total amount due in respect of the Goods and all monies owing to Goldacres have been paid in full (the "Debts"). Risk in the Goods shall pass to the Purchaser upon delivery. (2) The Purchaser shall have the right to resell Goods but only as fiduciary agent and trustee for Goldacres by way of bona fide sale at full market value and in the ordinary course of its business. (3) Until all the Debts have been paid in full: (a) the Purchaser shall take custody of the Goods as trustee, fiduciary agent and bailee for Goldacres; (b) the Purchaser shall keep the Goods separate from any other goods and properly marked, stored, protected and insured; (c) the Purchaser must hold all of the money it receives ("Proceeds"): (i) from the sale of any property into which Goods supplied have been incorporated; and (ii) from the sale of Goods or provision of services including the Goods supplied by the Goldacres as bailee, fiduciary agent and trustee for Goldacres, but the Purchaser need not hold on trust any money exceeding the amount of the Debts at the time the money is received. (d) The Purchaser expressly acknowledges that it is bound by the fiduciary obligation created in the preceding paragraph and acknowledges that: (i) it must hold the Proceeds on trust for Goldacres; (ii) it must place the whole of the Proceeds in an account separate from its own moneys (the "Proceeds Account"); (iii) it must maintain the Proceeds Account separate from its own moneys at all times. (iv) it must maintain proper records for the Proceeds Account. (v) it must not assign or encumber any book debts arising from sales made in circumstances set out in clauses 16(c)(i) and (ii) or do any other act in derogation of Goldacres' legal or beneficial interests; and (vi) it must account to Goldacres on demand for all moneys standing to the credit of such account. (e) For the purposes of identification of different consignments of Goods purchased from Goldacres and receipt of Proceeds, the Purchaser agrees that the principle of "Last In, First Out" shall be applied to any items that cannot be distinguished. (f) Goldacres may trace the Proceeds in equity. (4) Goldacres may at any time, without notice to the Purchaser and without prejudice to any other rights which it may have against the Purchaser, terminate any contract connected with the Goods and the bailment referred to in clause 16(3) and enter upon any premises owned or occupied by the Purchaser where Goldacres reasonably believes the Goods may be stored, and repossess the Goods without liability for any damaged caused, and subsequently dispose of the Goods at Goldacres' discretion if: (a) the Debts are not paid in accordance with these terms and conditions or any other contract or arrangement between Goldacres and the Purchaser; or (b) Goldacres receives notice of or reasonably believes that: (i) a third person may attempt to levy execution against the Goods; or (ii) the Purchaser is insolvent (within the meaning of the Corporations Act 2001) or bankrupt; or (iii) the Purchaser has entered into any arrangement or composition with its creditors, gone into liquidation, or has appointed a receiver, a receiver and manager or administrator. (5) If after repossession under clause 16(4) Goldacres sells the Goods, Goldacres shall account to the Purchaser for any proceeds of sale (less expenses of repossession and sale) that exceeds the amount of the outstanding Debts. (6) If any Goods belonging to Goldacres are disposed of by the Purchaser or an insurance claim is made in respect of them, Goldacres shall be entitled to trace the sale or insurance proceeds, which proceeds shall be held by the Purchaser in a separate bank account on trust for Goldacres. (7) The Purchaser agrees and acknowledges that in the event it sells Goods to a third party on account, it will include in its terms and conditions of sale a provision under which the Purchaser retains title to the Goods until such time that the total amount due in respect of the Goods and all monies owing to the Purchaser have been paid in full by that third party debtor.The Purchaser also agrees and acknowledges that in these instances, it will register its PMSI in accordance with the PPSA in respect of its security interest in the Goods. PPSA provisions 17. (1) The Purchaser acknowledges that these terms and conditions constitute a security agreement for the purposes of section 20 of the PPSA and that a security interest exists in all Goods (and any associated Proceeds from their sale) previously supplied by Goldacres to the Purchaser (if any) and in all in future Goods (and any associated Proceeds from their sale) that may be supplied to the Purchaser by Goldacres. (2) The Purchaser acknowledges that Goldacres has a first ranking purchase money security interest ("PMSI") (as defined in section 14 of the PPSA) in the Goods and the Purchaser must not jeopardise such ranking (whether by act or omission). (3) The Purchaser acknowledges that it has received value as at the date of first delivery of the Goods and has not agreed to postpone the time for attachment of the security interest (as defined in the PPSA) granted to Goldacres under these terms and conditions. (4) The Purchaser will execute documents and do such further acts as may be required by Goldacres to register the security interest granted to Goldacres under these terms and conditions under the PPSA. (5) Until ownership of the Goods passes, the Purchaser must not give to Goldacres a written demand or allow any other person to give Goldacres a written demand requiring Goldacres to register a financing change statement under the PPSA in respect of Goldacres' interest in the Goods. (6) The Purchaser must indemnify Goldacres and on demand reimburse Goldacres for all costs and expenses incurred by Goldacres in respect of these terms and conditions including but not limited to Goldacres registering its security interest in the Goods, lodging, discharging or amending any financing statement or financing change statement, or otherwise complying with the PPSA. (7) The Purchaser agrees (other than as provided in these terms and conditions) not to sell, lease, mortgage, deal with, dispose of or create or attempt to create any other security interest in or affecting the Goods unless and until the Purchaser's Debts have been satisfied. (8) The Purchaser waives its rights under the following provisions of Chapter 4 of the PPSA: (a) to receive a notice on enforcement action against liquid assets (section 121(4), (b) to receive a notice to seize collateral (section 123); (c) to receive a notice of disposal of Goods by Goldacres purchasing the Goods (section 129); (d) to receive a notice to dispose of Goods (section 130); (e) to receive a statement of account following disposal of Goods (section 132(2)); (f) to receive a statement of account if no disposal of Goods for each 6 month period (section 132(4)); (g) to receive notice of any proposal of Goldacres to retain Goods (section 135(2)); (h) to object to any proposal of Goldacres to either retain or dispose of Goods (section 137(2)); (i) to redeem the Goods (section 142); (j) to reinstate the security agreement (section 143); (k) to receive a notice of any verification statement (section 157(1) and section 157(3); (9) The rights Goldacres may have under the PPSA are supplementary and in addition to those set out in these terms and conditions and do not derogate from the rights and remedies of Goldacres under these terms and conditions or under any other statute or under general law. (10) The Purchaser must give 10 business days prior written notice of any proposed change in the Purchaser's name or other identifying characteristics and details. Purchasers property 18. Any property of the Purchaser under Goldacres' custody or control shall be entirely at the Purchaser's risk as regards loss or damage caused to the property or by it. Storage 19. Goldacres reserves the right to make a reasonable charge for storage if delivery instructions are not provided by the Purchaser within (14) fourteen days of a request by Goldacres for such information. Returned Goods 20. Goldacres shall not be under any obligation to accept Goods returned by the Purchaser and will do so only on terms to be agreed in writing in each individual case. Goods sold 21. All Goods to be supplied by Goldacres shall be described on the purchase order agreed by Goldacres and the Purchaser and the description on such purchase order modified as so agreed shall prevail over other descriptions including any Purchaser's specification or enquiry. Cancellation 22. No order may be cancelled except with the consent in writing and on terms, which will indemnify Goldacres against all losses. No waiver 23. The failure of any party to enforce the provisions of these terms and conditions or to exercise any rights expressed in these terms and conditions shall not be a waiver of such provisions or rights and shall not affect the enforcement of this agreement.The exercise by any party of any of its rights expressed in this agreement shall not preclude or prejudice such party from exercising the same or any other rights it may have irrespective of any previous action taken by that party. Force Majeure 24. If by reason of any fact, circumstance, matter or thing beyond the reasonable control of Goldacres is unable to perform in whole or in part any obligation under these terms and conditions then Goldacres shall be relieved of that obligation under these terms and conditions to the extent and for the period that it is so unable to perform and shall not be liable to the Purchaser in respect of such inability. Passing of risk 25. Risk in the Goods shall pass to the Purchaser upon delivery of the Goods to the Purchaser or collection of the Goods by the Purchaser's agent or carrier as the case may be. Exclusion of liability 26. To the extent permitted by law Goldacres shall not be liable to the Purchaser in contract or in tort arising out of, or in connection with, or relating to, the performance of the Goods or any breach of these conditions or any fact, matter or thing relating to the Goods or error (whether or not it is negligent or a breach of contract) in information supplied to the Purchaser or a user before or after the date of the Purchaser's or user's use of the Goods and Goldacres shall be under no liability for damages arising out of the use of any chemicals, liquids, or mixtures in the Goods, nor for any application, not for the application methods nor for the environmental effects, which may result therefrom or from the use of the Goods. Exclusion of representations and arrangements 27. To the extent permitted by law the terms and conditions supersede and exclude all prior and other discussions, representations (contractual or otherwise) and arrangements relating to the supply of the Goods or any part thereof including, but without limiting the generality of the foregoing, those relating to the performance of the Goods or any part thereof or the results that ought to be expected from using the Goods. Place of contract 28. The contract for sale of the Goods and the provision of the services is made in the State ofVictoria and the Purchaser agrees to submit all disputes arising with Goldacres to the courts of such State and any court competent to hear appeals therefrom.
Contents
CHASSIS5
H Frame - 3/4/5000L
5
Front Steps - 3000L
6
Front Steps - 4/5000L
7
Spray Pressure Gauge
8
Pull - 3000L
9
Pull - 4/5000L
10
Boom Rests - 3000L
11
Delta Boom Rests - 4000L
12
Delta Boom Rests - 5000L
13
TriTech Boom Rests - 4/5000L
14
30L Hand Wash Bottle
15
PUMPS
17
Pump - Zeta 260 PTO Shaft drive
17
Pump - Zeta 260 Hydraulic Drive
18
Hydraulic hose Zeta 260 kit
19
Pump - Zeta 260 TS 2C Pump Breakdown20
Pump - Zeta 260 MI-I Pump Breakdown 21
Pump - Zeta 170 PTO Drive
22
Pump - Zeta 170 Hydraulic Drive
23
Hydraulic hose Zeta 170 kit
24
Pump - Zeta 170 1C Pump Breakdown 25
Pump - Zeta 170 MI-1 Pump Breakdown 26
Hydraulic drive conversion kit
27
Pressure Flow Compensator
28
FLUSH TANK
29
180L Flush Tank - 3000L
29
In-line Check Valve
30
400L Flush Tank - 4/5000L
31
RIGHT HAND POD
33
Airbag Compressor & Box Assembly 33
Compressor Box
34
Air Compressor Assembly
35
Compressor Gauge
36
Foam Marker Box
37
Foam Marker Air Compressor
38
Foam Marker Exhaust Valve
39
Foam Marker Solenoid
40
Foam Marker Pod On Chassis
40
LEFT HAND POD
41
Left Hand Pod - Suit 170L/min pump 41
Flow Control Valve - Suit 170L/min Pump 42
Suction Filter - Suit 170L/min Pump
43
Pressure Manifold
44
Fill Manifold
45
Chem Probe/Transcal Tap
46
Left Hand Pod - Suit 260L/min Pump 47
Flow Control Valve - Suit 260L/min Pump 48
Suction Filter Assy - Suit 260L/min Pump 49
Chemical Probe
50
Enviro coupling & hose
50
DCI - N/A
51
DUAL PRODUCT - N/A
53
INDUCTION HOPPER
55
40L Induction Hopper
55
40L Hopper Frame
56
40L Hopper Tank
57
Hopper Rinse Nozzle Sub Assembly 59
Hopper Bottom
60
60L Induction Hopper
61
60L Hopper Frame
62
60L Hopper Tank
63
60L Hopper Tank with Flange
65
Hopper Tank 60L Flange - Bottom
66
FOAM MARKER TANK
67
100 Litre Foam Marker Tank
67
Foam Concentrate Bottle
68
Foam Generator
69
Foam Generator Mounting
69
Foam Accumulator Assembly
70
Filter and Ball Valve
70
Foam Marker Filter
71
TRANSCAL
73
Transcal Bottle
73
Rinse Nozzle & Cap
74
Transcal Bottle Tap
75
Enviro coupling & hose
75
MAIN TANK
77
3000L Tank Assembly
77
4/5000L Tank
78
Sump Drain Valve
80
Tank Rinse Tee
81
Tank Rinse Elbow
81
Supermix Agitator
82
Venturi Filler
83
Hopper Tank Inlet
84
2"Tank Fill
84
Remote Tank Drain 4/5000L
85
Dry Sight Tube Kit
86
Dry Sight Tube Locating Cap
87
Dry Sight Tube Float
87
Dry Sight Tube Base
88
Tank Stops
88
Tank Straps & Brackets
89
WHEELS, AXLES & mUDGUARDS91
Axle Suit 3000L
91
Rigid Axle
92
Air Bag Axle 4/5/6500lt
93
Air Bag Axle
94
Mudguards Suit 3000L
95
Mudguards Suit 4/5000L
96
Mudguards97
Wheel Speed Sensor
98
Wheels99
Hub - 90 Series
100
Hub - 70 Series
101
BOOM CENTRE
103
Delta Boom Centre Assembly
103
Delta Boom Paralift Assembly - 3000L 105
Delta Boom Paralift Assembly - 4/5000L 106
Accumulator Manifold
107
Delta Centre - Adjustable Tilt Links 108
Delta Centre - Hydraulic Tilt
109
Delta Centre - Hydraulic Tilt Cylinder 109
Delta Boom Cable Adjuster
110
Delta Boom Height Limit Switch
111
Delta Centre Oversize Sign
112
TriTech Boom Centre Assembly
113
TriTech Cable Mount - Rear LH
115
TriTech Cable Mount - Rear RH
116
Flow Meter Assembly
117
TriTech Centre With Tilt -
Replacement Links
118
TriTech Centre With Tilt Cylinders
118
TriTech Paralift & Paralift Arms
119
TriTech Complete Centre & Paralift 120
Lower Limit Switch
121
TriTech Spring Yaw Kit
122
TriTech Hydraulic Yaw
123
Yaw Pressure Reducing Valve
124
Yaw Control Valve Assembly
125
Oversize Sign Mount
126
Delta Link Locking Plate
127
Boom Valve Assembly
128
Boom Valves
129
BOOM WING
131
Cable Drum - Delta
131
Cable Drum Top Pivot - Delta
132
Cable Drum Lower Pivot - Delta
133
Boom Fold Adjuster - Delta
134
Boom Cable Spring - Delta
135
Steel Inner Wings - Delta
136
Steel Outer Wings - Delta
136
Aluminium Outer Wings - Delta
137
Flip Over Ends
138
Flip Over End Saddle
138
Rubber Bump Stop
139
Bump Stop Extension Bracket
139
Boom Protector - Inner - Delta
140
Boom Protector - Outer - Delta
140
Cable Drum - TriTech
141
Cable Drum Top Pivot - TriTech
142
Cable Drum Lower Pivot - TriTech 143
Boom Fold Adjuster - TriTech
144
Boom Cables - TriTech
145
Boom Cable Spring - Suit 24m TriTech 145
Boom Cable Spring - Suit 28-30m TriTech1 46
Steel Inner Wings - TriTech
146
Aluminium Outer Wings - TriTech
147
Aluminium Break Away Tip
147
Boom Protector Assembly -
Outer - TriTech
148
Boom Protector Assembly -
Inner - TriTech
148
Fence Line End Protector - Standard 149
Fence Line End Protector - Quick Fit 150
Three Dimensional Breakaway
151
Boom Line Plumbing
153
Manual Fence Line Nozzle
154
Solenoid Operated Fence Line Nozzle 155
Adjustable Nozzle Brackets
156
Pre Packaged Kits
156
600mm Boom Poly
157
1100mm Boom Poly
157
1200mm Boom Poly
157
1600mm Boom Poly
158
2100mm Boom Poly
158
2600mm Boom Poly
159
3100mm Boom Poly
159
ELECTRICS
161
Boom LED Lights
161
Lights162
Electrical Components
162
Raven (AMP) Electrical Connectors 163
Electrical Connectors
165
Deutsch Electrical Connectors
167
Console Mounting Kit
170
Quick Release Couplings
187
Hydraulic Hoses
187
Hose ID Tags
188
Hydraulic O-Rings and
Retaining Washers
188
Delta Hydraulic Cylinder - Fold RH 189
Delta Hydraulic Cylinder - Fold LH 189
Delta Hydraulic Cylinder - Boom Lift 190
Delta Hydraulic Cylinder - Wing Tilt 190
TriTech Hydraulic Cylinder - Boom Lift 191
TriTech Hydraulic Cylinder - Wing Tilt 191
TriTech Hydraulic Cylinder - Fold RH 192
TriTech Hydraulic Cylinder - Fold LH 192
TriTech Hydraulic Cylinder - Yaw
193
FILTRATION
195
3/4" BSP Filter with 200 mesh screen 195
Pressure Filter Assembly
196
2" Fill Filter with 120 mesh screen
197
In Line Boom Filter
198
2" Suction Filter
199
Air Filter
199
Hose Clamps
200
Cable Ties
200
Hoses201
SCHEMATICS
171
3000L Plumbing
171
3000L Plumbing with 260 pump
172
4/5000L Plumbing with 260 pump
173
Exacta Foam Marker Plumbing
174
Pneumatic Schematic
175
Hydraulic Schematic
176
Electrical Layout
177
DECALS
179
HYDRAULICS
185
Boom Lower Solenoid
185
Load Sense Turbo Valve
186
Chapter 1
CHASSIS
2
3
4
5
6
7
8
T NUMBER
DESCRIPTION
QTY.
009
M16 washer Zink coated
16
939
H Frame M16x60 bolt - 3/4/54000L
029
M16 Nyloc nut
8
931
M16x50 bolt
4
685
H-Frame to suit 3-5000L Special 2013
1
161
Ladder suit 2013 Prairie
1
14
587
M12 WASHER
6
575 307
M12 Spring washer SS
6
M12x30 bolt
6
13
120
Heavy Duty Exaust Clamp 36mm
2
680
Handrail Side Special
2
650
Plastic end cap 25.4x25mm
1
411
Beacon mount screw on
1
975
Orange Beacon Light
1
605
Hand Wash Bottle ASM 2013
1
12 Only used when beacon not fitted
5
10 987
2113
6 11
9
8
15
7
REV NO
TITLE:
CHANGE
DATE
1-3 M
GOLDACRES
MITC PH: 0
FAX:
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA5001009
2
GA5000939
Washer 16mm Flat ZPUNLESS OTHERWISE SPECIFIED
DATE:
14/01/2013
DIMENSIONS ARE IN MILLIMETERS DRAWN:
Bolt M16 x 60
DEBUR ALL EDGES
PART QUANTITY:
MATERIAL:
16 DWG NO.
H-Frame_Assembly
4
2
3
G3 A5001029
N4 ut M16 Nyloc
1
DO NOT SCALE DRAWING
8 SCALE:1:15
SHEET 1 OF 1
4
GA5000931
Bolt M16 x 50
4
5
GA4659685
H-Frame to suit 3-5000L Special 2013
1
6
GA4658161
Ladder suit 2013 Prairie
1
7
GA5000587
Washer 12mm Flat
6
8
GA5000575
Washer 12mm Spring SS
6
Continued over page
Chapter 1 - Chassis - 5
4
QTY.
32
H
1
H
1
k) 2
2
tep 2
4 27
4 4
2
2
12 16
4
H Frame - 3/4/5000L
ITEM NO. 9 10 11 12 13 14 15
PART NUMBER GA5000307 GA5075120 GA45659680 GA5052650 GA5020411 GA5048975 GA4905605
DESCRIPTION
Bolt M12 x 30
Heavy Duty Exhaust Clamp 36mm
Handrail Si6de Special
7
Plastic end cap 25.4 x 25mm
Beacon mount screw on
Orange Beacon Light
Hand Wash Bottle ASM 2013
Front Steps - 3000L
3
QTY.
6
2
28
1
1
A
1
1
B
C
2
13
5
8
4
15 13
1
8
9
88
D
14
10 14
7
12 11 9 10
6 8
14 13 8 8 14
ITEM NO. 1 2 3 4 5 6
PART NUMBER GA4659691 F70684A F70654A GA5008629 GA5004053 GA4522617
DESCRIPTION
QTY.
Lower Ladder 3000L Special 2013
2
Upper catch mounting plate Left Hand
1
Upper catch mounting platReERVigNhOt HaCnHdANGE
1DATE ECN NO.
GOLDACRES Female rubber door holder (black)
BHCS M6 x 20 SS
2
1-3 MORANG CR MITCHELL PARK 3352
2 PH: 03 53426399
FAX: 03 53426308
Latch plate suit prairie EF nTaITrLEr:ow step
2
Continued over page
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 2/05/2012
6
-
Special
Evolution
MY13
PDDaIEMrBtUEsNRSMAIOLaLNnESDuAGaRlEES-INRMeIvLLI2METERS
DRAWN:
Name
DWG NO.
3000L Special Steps 2013
A3
DATE EDITED:
MATERIAL:
8/11/2013
4
Matt
DO NOT SCALE DRAWING
SCALE:1:10
SHEET 1 OF 1
4
TY.
2
1 1
2
2
2
4 27 4 4 2 2 12 16 4
Front Steps - 3000L
ITEM NO. 7 8 9 10 11 12 13 14 15
PART NUMBER GA5000115 GA5000117 GA5004437 GA5048115 GA5011607 GA5004079 GA55065455 GA5000141 GA5011153
DESCRIPTION
Washer 10mm Flat SS
Washer 10mm Flat SS Heavy duty
Washer 6mm SS
Nut M6 nyloc
Male rubber door holder
Bolt M6 x 30
Bolt M10 6x 30 Gr8.8
7
Nut M10 Nyloc
SHCS M10 x 20
Front Steps - 4/5000L
3
QTY. 4 27 4 4 2 2 12 8 16 4
A
B
14 8 8 13
C
2
5
15 13
1
4
8
8
9
14
7
6 12 11 9 10
10
8 13 8 8 14
D
14
ITEM NO. 1 2 3 4 5 6
PART NUMBER GA4659690 F70684A F70654A GA5008629 GA5004053 GA4522617
DESCRIPTION Lower Ladder Prairie, Special 2013 Upper catch mounting plate Left Hand Upper catch mounting plate Right Hand Female rubber door holder (black) BHCS M6 x 20 SS Latch plate suit prairie EF narrow step
QTY. 2 1 1 2 2 2
REV NO
TITLE:
CHANGE
Continued overDpAaTgEe ECN NO.
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 ChapterPFAH1X: -0: 30C35h35a43s24s62i36s93-9087
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 2/05/2012 DIMENSIONS ARE IN MILLIMETERS DRAWN:
DWG NO.
A3
Front Steps - 4/5000L
ITEM NO. PART NUMBER DESCRIPTION
7
GA5000115
Washer 10mm Flat SS
8
GA5000117
Washer 10mm Flat SS Heavy duty
9
GA5004437
Washer 6mm Flat SS
10
GA5048115
Nut M6 nyloc
11
GA5011607
Male rubber door holder
12
GA5004079
Bolt M6 x 30
1
132
GA5065455 3 Bolt M10 x 30 Gr84.8
5
NO. PART NUMBER
DESCRIPTION
QTY.
1
GA5016233
2
GA5018323
14 15
Sw16/imv4eGG"mlAAMEx55l1-bF00/o014B01waB11lS45lpPV13ua(sLhlEvGienR(SSItSSe))eNSlHuCt MS M1010N21 yxlo2c0
3
GA5048300
1/4 Tee Female
1
4 5
Spray Pressure Gauge GA5000587
GA4948460
Washer HD ZP 12mm
3
Pressure gauge large face 160PSI
1
5
4
2
1 4
3
QTY. 4 27 4 4 2 2 12 6 16 4
ITEM NO. 1 2 3 4 5
PART NUMBER GA5016233 GA5018323 GA5048300 GA5000587 GA4948460
DESCRIPTION Swivel Elbow push in Steel 6mm x 1/4" BSP Ball valve 1/4" M-F (SS) Tee 1/4" Female Washer 12mm Flat HD Pressure gauge, large face 160PSI
QTY. 2 1 1 3 1
REV NO
1
2
3
4
8 - Special Evolution MY13 Parts Manual - Rev 2
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 14/01/2013
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Name
DATE EDITED:
MATERIAL:
14/01/2013
Matt
DO NOT SCALE DRAWING
TITLE:
DWG NO.
spray p
SCALE:1:7.
0x60 bolt
4
Nyloc nut
4
chain and pin
1
rt arm suit 3000 EF
1
support backing plate
1
mm SS Heavy duty
4
0 bolt ZP G8.8 Nyloc Nut
Pull -22 3000L
8 12 10 10 11
5226
9
1
2
3
4
5
A
1
5226
432
2
1
B
7
REV NO CHANGE
DATE E
C
ITEM NO. PART NUMBER DESCRIPTION
GOLDACRES Note: Inserts available for Tow Eye
1 - GA4582455 Spacer bush tow eye suit 1 1/2" pin (polyurethane). 2 - GA5075075 Towing eye bush ID 35mm OD 50mm.
1-3 MORA MITCHELL PH: 03 534 FAX: 03 53
TITLE:
QTY.
1
GA4659535
2
GA5001739
3
GA5001721
Pull Special 3000 MY13
DATE CREATED:
WaUDsNIhMLeEESNrSS2IOO0TNHDmSERAmWREISFIENlSaMPtEILCHLIIFMeIEEDaTEvRyS
D15/u0t1y/2013
DRAWN:
DEBUR ALL EDGES
Name
Washer 20mm Spring DATE EDITED: 16/01/2013
REV NO
CHANGE
MATERIAL:
APPL DATE
1
DWG NO. 14 UNLESS OTHERWISE SPECIFIED:
Pull 3000L MY13 DIMENSIONS ARE IN MILLIMETERS
DATE CREATED:
17/01/2013
DEBUR ALL EDGES DATE EDITED:
DRAWN:
Name
6
17/01/2013
MATERIAL:
1-3 M
GOLDACRES
MITCH PH: 03
FAX:
TITLE:
DWG NO:
towing eye inserts
3
4
GA4 5011323
BolMt aMtt 20 x 30 1
DO NOT S2CALE DRAWING
Matt SCALE:1:10
2 DO NOT SCALE DRAWING
SCALE:1:2
SHEET 1 OF 1 SHEET 1 OF 1
5
GA5011333
Bolt M20 x 60
8
6
GA5048125
Nut M20 Nyloc
4
7
GA5015213
Jack with chain and pin
1
8
GA4657666
Hose support arm suit 3000 EF
1
9
GA4522926
EF pull hose support backing plate
1
10
GA5000117
Washer 10mm Flat SS HD
4
11
GA5011163
Bolt M10 x 70 ZP G8.8
2
12
GA5000141
Nut M10 Nyloc
2
13
GA4652485
Welded towing eye
1
14
GA5016243
Swivel Tow Eye (minus bush)
1
15
GA5051385
Split Pin M8 x 125
1
16
GA5065030
Safety Chain (11 links)
2
17
GA5075230
Bow Shackle 3.25 tonne
4
18
GA5012203
Grease Nipple 1/4" UNF Short
1
Chapter 1 - Chassis - 9
7
GA5011333
M20x60 bolt
6
8
GA5048110
M20x120 ZP Bolt GR8.8
2
9
GA5001739
M20 Heavy Duty Flat Washer
12
10 GA5048125
B
11 L048A
M20 Nyloc nut
4
Cable pivot bush
2
12
Belly Tank Cradle Sub-Assem
1
Pull - 4/5000L
C
19 GA4652486
20 GA5012203
21
Chain link 105x50x13
22 GA5000667
23 GA5016243 24 GA5051385 25 GA5001721
Welded towing eye - angled
1
Grease Nipple 1/4" UNF Short
1
Chain link 105x50x13
6
Bow Shackle (Now use GA5075230)
4
Swivel Tow Eye (minus bush)
1
M8 x 125 Split pin
1
M20 Spring Washer
4
12
14 15 11
8 9 13
6 5
D
10
7
18 16 16 17
1
19 24
E
23
1
2
43
4
5
9
A
10
3 21
2
B
9 25 7 20
22
2 1
REV NO CHAN
GO
TITLE:
F
UNLESS OTHERWISE SPECIFIED
DATE CREATED:
15/01/2013
DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Name
Pull 4-5000L MY
DATE EDITED:
MATERIAL:
17/01/2013
1
2
3
4
Matt
DO NOT SCALE DRAWING
SCALE:1:15
C
Note: Inserts available for Tow Eye
1 - GA4582455 Spacer bush tow eye suit 1 1/2" pin
(polyurethane).
2 - GA5075075 Towing eye bush ID 35mm OD 50mm.
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA4659540
Pull Special 4000 and 5000 MY13
1
GOLD
2
GA4657680
Special EF Jack D
1
TITLE:
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS
DATE CREATED:
17/01/2013
3
SP-IH-009
Hopper Latch Pin REV NO CHANGE
APPL DATE
DEBUR ALL EDGES DATE EDITED: 17/01/2013
1DRAWN:
Name
MATERIAL:
DWG NO:
towing eye inserts
4
PCH-019MACH
Large Chassis Pin 1
2
Matt
2DO NOT SCALE DRAWING
SCALE:1:2
5
L073A
Washer suit drawbar pin
2
6
GA5011321
Bolt M20 x 50 ZP
2
7
GA5011333
Bolt M20 x 60
6
8
GA5048110
Bolt M20 x 120 ZP GR8.8
2
9
GA5001739
Washer 20mm Flat HD
12
10
GA5048125
Nut M20 Nyloc
4
11
L048A
Cable pivot bush
2
12
-
Refer to chapter 3 for information on the flush water tank
1
13
GA4522385
Prairie EF Belly tank retaining strap
1
14
GA4657665
Hose support arm suit EF pull
1
15
GA4522926
EF pull hose support backing plate
1
16
GA5000117
Washer 10mm Flat SS Heavy duty
4
17
GA5011163
Bolt M10 x 70 ZP G8.8
2
18
GA5000141
Nut M10 Nyloc
2
Continued over page
10 - Special Evolution MY13 Parts Manual - Rev 2
Pull - 4/5000L
ITEM NO. PART NUMBER DESCRIPTION
QTY.
19
GA4652486
Welded towing eye - angled
1
20
GA5012203
Grease Nipple 1/4" UNF Short
1
21
GA5065030
Safety chain (11 links)
2
22
GA5075230
Bow shackle 3.25 tonne
4
23
GA5016243
Swivel Tow Eye (minus bush)
1
3
24 4 GA5051385
5 Split Pin M8 x 125
6
TION
prairie ce Mk3 RH ght prairie
DeQfaTYu.l2t/5
GA5001721
Washer 20mm Spring
Bo11 om Rests - 3000L
nel 350mm
1
42mm Gal
8
432
racket
2
are Top U Bolt
1
P Heavy Duty 4
nut Z/P
4
are Top U Bolt 3
6
12
nk coated
6
c nut
6
gree 1" Banjo
1
er
1
7
1
8
4
A
B
1
5
7 8
9
13
C
11
10
D
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1a
GA4654200
Boom rest special mk3 RH
1
1b
GA4654205
2
GA4654250
3
GA5014617
4
GA5000707
Boom rest special mk3 LH (Not shown. All components for mounting LH boom rest are the samReEVaNsORH)CHANGE
1
DATE ECN NO.
1-3 MORANG CR
Boom rest upright prairie
GOLDACRES 1
MITCHELL PARK 3352
PH: 03 53426399
Rubber Channel 350mm
1
FAX: 03 53426308
TITLE:
Tek Screw 14G x 42mm Gal
8
Continued over page
DATE:
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS
8/11/2013
DRAWN:
DEBUR ALL EDGES
DWG NO.
boom_rest_assembly
A3
PART QUANTITY:
MATERIAL:
Chapter 1 - Chassis - 11
3
4
1
DO NOT SCALE DRAWING
SCALE:1:15
SHEET 1 OF 1
Boom Rests - 3000L
ITEM NO. PART NUMBER DESCRIPTION
5
F70107A
18mt ram bracket
6
GA5011259
U-Bolt M12 x 76 x 110 Square Top
7
GA5000587
Washer 12mm Flat ZP HD
8
GA5012461
Nut M12 Nyloc ZP
9
GA5011277
U-Bolt M16 x 127 x 110 Square Top
4
10
GA50051009
Washer 16m6 m ZP
7
QTY.
16 ght 2
11
GA5001029
12
HB100-90
13
GA5005259
Nut M16 Nyloc Hose barb 90 degree 1" Banjo Air Filter
4
olt 6
e
6
Delta Boom Rests - 4000L
16
16
11
12
5
12
2
2
1
EF
1
F
1
12
10
6
7
4
1
3 6 8 9 13 7
QTY. 2 1 4 4 3 68 6 1
A
1
B
C
D
ITEM NO. 1 2 3 4 5 6 7 8
PART NUMBER GA5000707 GA4903051 F70107A GA5011277 GA5011259 GA5000587 GA5012461 GA5001009
DESCRIPTION
QTY.
Tek Screw 14G x 40mm Gal
16
Pre-assembled boom rest upright
2
18mt ram bracket
4
U-Bolt M16 x 127 x 110 Square Top
6
U-Bolt M12 x 76mm x 110mm Square Top
6
Washer 12mm Flat Nut M12 Nyloc ZP Washer 16mm Flat ZP
REV NO
TITLE:
CHANGE
D1A6TE ECN NO.
GOLDACRES 1M1-63ITCMHOERLLAPNAGRCK R3352 PF1AH2X: 0: 3035354324623693908 Continued over page
12 - Special Evolution MY13 Parts Manual - Rev 2 DATECREATED:
UNLESS OTHERWISE SPECIFIED 3/05/2012
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Name
DWG NO.
4000L Boom Rests Delta Assembly
A3
DATE EDITED:
MATERIAL:
17/01/2013
4
Matt
DO NOT SCALE DRAWING
SCALE:1:20
SHEET 1 OF 1
Delta Boom Rests - 4000L
QTY. 16 2 4 6
6
ITEM NO. PART NUMBER
9
GA5001029
4
10
GA50154617
11
GA4654218
12
GA4654216
13
GA4654217
DESCRIPTION
Nut M16 Nyloc
Rubber Cha6nnel 350mm
7
Step back boom rest cross member
Step back boom rest RH suit EF delta boom
Step back boom rest LH suit EF delta boom
Delta Boom Rests - 5000L
16
16
11
12
5
12
2
2
1
12
1
10
1
6
7
4
1
3 6 8 9 13 7
QTY.
12
28
1
1
A
1
B
C
D
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA5000707
Tek Screw 14G x 40mm Gal
16
2
GA4903051
Pre-assembled boom rest upright
2
3
F70107A
18mt ram bracket
4
4
GA5011277
U-Bolt M16 x 127 x 110 Square Top
6
5
GA5011259
U-Bolt M12 x 76mm x 110mm Square Top
6
6
GA5000577
7
GA5012461
8
GA5001009
9
GA5001029
Washer 12mm Flat SS HDREV NO
Nut M12 Nyloc ZP
Washer 16mm Flat ZP
Nut M16 Nyloc
TITLE:
CHANGE
D1A6TE ECN NO.
GOLDACRES 11M-63ITCMHOERLLAPNAGRCK R3352 1PFAH2X: 0: 3035354324623693908
12
10
GA5014617
Rubber Channel 350mm
2
11
GA4UN6L5ES4S2O1TH9ERWISE
SPECIFIESDtep
back boom DATE CREATED:
3/05/2012
rest
crossDWmGeNmOb. er
(5000L)
1
12
DIMENSIONS ARE IN
GA4DE6B5U4R 2AL1L6EDGES
MILLIMETERS
Step
DRAWN:
Nbaamcek
boom
rest
RH
s5u0it0E0FL
BdoelotambRoeosmts
Delta
Assembly
1
A3
DATE EDITED:
MATERIAL:
4
13
GA7D4/a06v45i/d24012517
Step back boom rest LH suit EF delta boom
DO NOT SCALE DRAWING
SCALE:1:20
1 SHEET 1 OF 1
Chapter 1 - Chassis - 13
4
5
6
7
8
QTY.
000,
1
00,
1
A
1
1 12
TriTech Boom Rests - 4/5000L
12
Bolt 6
m
1
3
Only used when
beacon not fitted
1
1
B
1
8
2 2
4
10 pins 2
11 10 9 18
o
2
2
ert
2
1
TD
2
20
cial
1
10
7 56
19
21 2
C
12
14 14
17
D
15 16 13
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA4659670
Boom Rest Prairie RH 4000, 5000, 6500
1
2
GA4659675
3
GA5048975
4
GA5020411
5
GA5001009
6
GA5001029
Boom Rest Prairie LH 4000R,E5V0N0O0, 65C0H0ANGE
D1ATE
ECN NO.
Orange Beacon Light Beacon mount screw on Washer 16mm Flat ZP TITLE:
11-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 P1H: 03 53426399 FAX: 03 53426308 12
Nut M16 Nyloc
12
7 8
GA5011277 UNLESS OTHERWISE
U-Bolt M16 x DATE CREATED:
SPECIFIED 21/05/2008
127
x
110
Square Top DWG NO.
6
GA5DD0IEM5B2UENR6SA5IOL0LNESDAGREESIN
MILLIMPElaTEsRtSicDRAeWNn: d cap 25.4 A. McAndrew
x
25mm4000L
Boom
Rests
TriTech
Assembly
w1ith
rollers
A3
9
GA5004437 DATE EDITED: 17/01/2013
Washer 6mm MATERIAL: Flat SS
1
4
Matt
10
GA5004447
DO NOT SCALE DRAWING
Washer 6mm Spring SS
SCALE:1:20
SHEET 1 OF 1
1
11
GA5004053
BHCS M6 x 20 SS
1
12
GA5070700
Boom Rest Roller Prairie
2
13
GA5067885
Pin cover - plastic
2
14
GA5017659
Washer 1" Flat HD ZP
10
15
MACH0152
12mm Bolt Bush suit para lift pins
2
16
GA5000307
SHCS M12 x 30 GR12.9 ZP
2
17
GA4658745
Pin - suit boom rest roller
2
Continued over page
14 - Special Evolution MY13 Parts Manual - Rev 2
TriTech Boom Rests - 4/5000L
ITEM NO. 18 19 20 21
PART NUMBER GA5052345 GA5066630 GA4659685 GA5051230
DESCRIPTION 75 x 75 mm square tube insert black Polystone - 65 x 10, cut 590 RTD H-Frame to suit 3-5000L Special 2013 FHCS M5 x 16mm SS
3
4
5
6
7
30L Hand Wash Bottle CRIPTION
QTY.
ank 30L black with p holder
1
ash Tank mount racket
2
25 BHCS SS
8
er 8mm HD
16
Nyloc Nut
8
ash bottle tap
1
1 SS (20-32/12W)
1
QTY. 2 2 1 10
8
A
B
1
2 3
4
C
5
7
6
D
ITEM NO. 1 2 3 4 5 6 7
PART NUMBER GA5075110 GA4523740 GA5011473 GA5003643 GA5004917 GA5070735 GA5001681
DESCRIPTION
QTY.
Plastic water tank 30L black with soap holder
1
30L hand wash Tank mount bracket
2
BHCS M8 x 25 SS
8
Washer 8mm Flat HD
16
Nut M8 Nyloc
8
Hand wash bottle tap REV NO CHANGE
DATE
1 ECN NO.
1-3 MORANG CR
GOLDACRES Hose Clamp, 1" SS (20-32/12W)
1 MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
TITLE:
Hand Wash Bottle ASM 2013
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 23/12/2010
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Coen
DWG NO.
GA4905605
A3
DATE EDITED:
MATERIAL:
30/04/2015
3
4
David
DO NOT SCALE DRAWING
SCALE:1:4
SHEET 1 OF 1
Chapter 1 - Chassis - 15
16 - Special Evolution MY13 Parts Manual - Rev 2
PUMPS
Chapter 2
3
4
5
6
7
ON TO TS 2C
Q1TPY. ump - Zeta 260 PTO Shaft drive
t rear of 2C
1
er
1
eavy duty
11
pring S/S
3
ako
3
de angle
1
m HD
2
her SS
2
lt
2
0x30
4
Nut
4
ailable
8 A
10 9 8
B
2 1
7 654
3
11 4 4 12
C
D
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA5054505
Pump, Diaphragm type, Zeta 260,Through shaft PTO drive
1
2
GA5013499
PTO protector to suit rear of 2C pumps
1
3
7650-7202121902 PTO Cover
1
4
GA5000117
Washer 10mm Flat SS HD
11
5
GA5000137
Washer 10mm Spring SS
3
6
GA5071085
SHCS M10 x 25
REV NO CHANGE
3 DATE ECN NO.
GA5013511
7
GA5060830
PTO drive shaft wide angle 1.05m PTO drive shaft narrow angle
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352
1 PH: 03 53426399
FAX: 03 53426308
7650-7202121913 Standard shaft cover
TITLE:
Pump , Diaphragm type, Zeta 260 PTO Shaft drive. NOTE: W2200-OV/1-510
8
GA5004883
Washer 8mm Flat HD
2
9
DATE CREATED:
GA5004919 Washer 8mm Spring SS UNLESS OTHERWISE SPECIFIED 20/11/2009 DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DWG NO.
GA4900675-PAEF
2
A3
10
GA5004711DATE EDITED: 17/08/2012
Bolt M8 x 25 MATERIAL:
3
4
Matt
DO NOT SCALE DRAWING
SCALE:1:10
2
SHEET 1 OF 1
11
GA5065455
Bolt M10 x 30 Gr8.8
4
12
GA5000141
Nut M10 Nyloc
4
Chapter 2 - Pumps - 17
3
4
5
6
7
8
N
QTY.
MI-1 cc/rev aft
1 1
Pump - Zeta 260 Hydraulic Drive
A
eavy Duty 2
er SS
2
0
2
aft Cover, nd 300
1
r with 0/4070
1
et
1
P
2
1
avy duty
8
GR8.8
4
ut
4
ydraulic ort MY10
1
B
10 9 9
art 1170159929
14
C
6 8 7
D
1
543
2
12 11 11 13
ITEM NO. PART NUMBER
DESCRIPTION
QTY.
1
GA5054500
Pump Zeta 260 MI-1
1
2
GA5047515
Motor, hydraulic, 80ccR/ErVevN,O25.4CmHAmNGsEhaft, Suit spray puDmATpE ECN 1NO.
3
GA5000587
4
GA5000575
Washer 12mm Flat HD ZP
2 1-3 MORANG CR
Washer 12mm Spring SS
GOLDACRES MITCHELL PARK 3352
2 PH: 03 53426399
FAX: 03 53426308
5
GA5000321
SHCS M12 x 40
TITLE: Pump , Diaphragm type, Zeta 260 MI pump w2ith
6
PUMPCOVER250
Plate, Rear Pump Shaft Ch4o0yv0de0rars,ueRlricOiesd2cr5ivo0en,,tZrsopelleetearsd2(cs6eo0nmsaopnrled&te3R0PkiM0t) console1. Suit
7
1170171293 Pump RPM Sensor - Suit 440/450 DATECREATED:
UNLESS OTHERWISE SPECIFIED 20/11/2009
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DWG NO.
GA4900663-PAEF
1 A3
8
GA5016169 DATE EDITED: 30/04/2015
Super Magnet MATERIAL:
1
3
4
9
GA50D1a1vid499
Nut M8 Hex ZP DO NOT SCALE DRAWING
SCALE:1:8
SHEET 1 OF 1
2
10
GA5048655
Bolt M8 x 40
1
11
GA5000117
Washer 10mm Flat SS HD
8
12
GA5065455
Bolt M10 x 30 Gr8.8
4
13
GA5000141
Nut M10 Nyloc
4
14
GA5067186
Hose assembly kit hydraulic drive suit hose support MY10 1
18 - Special Evolution MY13 Parts Manual - Rev 2
Hyd raulic hose Zeta 260 kit
GA5067186 Hose assembly kit hydraulic drive suit hose support MY10
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA5018221
Valve check needle throttle 1/2"
1
2
S167-080808
Hydraulic adapter,Tee, 1/2" male BSP x 1/2" male BSP x 1/2"
2
female swivel
3
GA4922110
4
GA4922115
5
GA4922105
Short hydraulic pump hose Short hydraulic pump hose Long hyd pump hose
1
1
2
6
S75-0808
7
36B-08
Hydraulic adaptor, Nipple, 1/2" BSPT male x1/2"BSPPmale
2
witho-ring
Ring Retaining BSPP 1/2"
2
8
RO-BP08
O-RingBSPP 1/2"
2
9
R81-08M
Quick connect fitting, 1/2" male tip x 1/2" female thread
2
GA5052365
Cover, Green plastic, Suit hydraulic quick connect fitting R81-08M
2
Chapter 2 - Pumps - 19
Pump - Zeta 260 TS 2C Pump Breakdown
ITEM NO. PART NUMBER GA5054505
DESCRIPTION Pump Zeta 260 TS 2C - Shaft drive
QTY. 1
PART No. KIT-ZETA260-D
KIT-ZETA260-C
ZETA 260 SPARE PARTS DESCRIPTION Pump Diaphragm Kit suit Zeta 260 and RO250 Udor Pumps Pump rebuild kit, includes diaphragms, seals & valves, Suits both Zeta 260 and RO250 in PTO and Hyd Drive
20 - Special Evolution MY13 Parts Manual - Rev 2
Pump - Zeta 260 MI-I Pump Breakdown
ITEM NO. PART NUMBER GA5054500
DESCRIPTION Pump Zeta 260 MI-1 - Hydraulic drive
QTY. 1
Chapter 2 - Pumps - 21
ON
PTO 1C
er P GR8.8
OD, Flat SS eavy duty Nut ako pring S/S angle 1.05m
QTY.
1
1 4 4 7 4 3 3 1
Pump - Zeta 170 PTO Drive
5 8 7
9
1 2
6 5 4 3
ITEM NO. 1 2 3 4 5 6 7 8 9
PART NUMBER GA5054515 7650-7202121902 GA5065455 GA5002595 GA5000117 GA5000141 GA5071085 GA5000137 GA5060830
DESCRIPTION Pump Zeta 170 PTO 1C PTO Cover Bolt M10 x 30 ZP GR8.8 Washer, 3/8" x 1 1/2" OD, Flat SS Washer 10mm Flat SS Heavy duty Nut M10 Nyloc SHCS M10 x 25 Washer 10mm Flat Spring SS PTO drive shaft std angle 1.05m
QTY. 1 1 4 4 7 4 3 3 1
22 - Special Evolution MY13 Parts Manual - Rev 2
3
4
5
6
7
Pump - Zeta 170 Hydraulic Drive
8 A
14 11 12 12 10
1
B
2
3 4
5
13
C
9
D
7
6
8
ITEM NO. PART NUMBER
1
GA5054510
2
GA5047515
3
GA5000587
DESCRIPTION
REV NO CHANGE
DATE ECNQNTOY. .
1-3 MORANG CR
Pump Zeta 170 MI-1
GOLDACRES 1 MITCHELL PARK 3352 PH: 03 53426399
Motor, hydraulic, 80cc/rev, 25TIT.L4E:mm shaft, Suit spray pump FAX: 03 1 53426308
Washer 12mm Flat ZP HD Pump-Zeta 170 MI (RO160 MI) suit Special
2
4
GA5000575 Washer 12mm Spring SS UNLESS OTHERWISE SPECIFIED
DATE CREATED:
10/11/2009
DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
5
GA5000321 SHCS M12 x 40 DEBUR ALL EDGES DATE EDITED:
MATERIAL:
GA4904680
2
A3
2
1/05/2015
3
64
GA5002595 David
Washer, 3/8D"O xNOT 1 1/2" OD, SCALE DRAWING Flat SS SCALE:1:5
SHEET 1 OF 1
4
7
GA5000117
Washer 10mm Flat SS HD
4
8
GA5065455
Bolt M10 x 30 ZP GR8.8
4
9
GA5000141
Nut M10 Nyloc
4
10 1170171293
Pump RPM Sensor - Suit 440/450
1
11 GA5048655
Bolt M8 x 40
1
12 GA5011499
Nut M8 Hex ZP
2
13 GA5016169
Super Magnet
1
14 pumpcover
Plate, Rear Pump Shaft Cover, RO160 and Zeta 170
1
Chapter 2 - Pumps - 23
Hydraulic hose Zeta 170 kit
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA5018221
1/2" Needle Valve
1
2
S167-080808
Hydraulic adapter,Tee, 1/2" male BSP x 1/2" male BSP x 1/2" female swivel
2
3
GA4905044
Short hydraulic pump hose
1
4
GA4905046
Short hydraulic pump hose
1
5
GA4922105
Long hydraulic pump hose
2
6
S75-0808
7
36B-08
8
RO-BP08
Hydraulic adaptor, Nipple, 1/2" BSPT male x 1/2" BSPP male
with o-ring
2
Ring Retaining BSPP 1/2" O-Ring BSPP 1/2"
2
2
9
R81-08M
Quick connect fitting, 1/2" male tip x 1/2" femalethread
2
GA5052365
Cover, Green plastic, Suit hydraulic quick connect fitting
2
R81-08M
24 - Special Evolution MY13 Parts Manual - Rev 2
Pump - Zeta 170 1C Pump Breakdown
ITEM NO. PART NUMBER GA5054515
DESCRIPTION Pump Zeta 170 1C - Shaft drive
QTY. 1
PART No. KIT-ZETA170-D
KIT-ZETA170-C
ZETA 170 SPARE PARTS DESCRIPTION Pump Diaphragm Kit suit Zeta 170 and RO160 Udor Pumps Pump rebuild kit, includes diaphragms, seals & valves, suits both Zeta 170 and RO160 Udor Pumps
Chapter 2 - Pumps - 25
Pump - Zeta 170 MI-1 Pump Breakdown
ITEM NO. PART NUMBER GA5054510
DESCRIPTION Pump Zeta 170 MI-1 - Hydraulic drive
QTY. 1
26 - Special Evolution MY13 Parts Manual - Rev 2
3
4
5
6
7
CRIPTION aulic 80cc/rev
QTY. 1
draulic motor to DOR
1
Hydraulic suit UDOR pump
apter
1
pto converter with b screws
1
drive
conversion
kit
5 Unbrako
3
WASHER
4
oc nut Z/P
2
HT ZP Bolt
2
nsor cut down to uit kit
1
Magnet
1
bly kit hydraulic e support MY10
1
8 A
B
11
C
9 10
D
2 7 5 4 3 1 6 8
REV NO CHANGE
DATE ECN NO.
ITEM NO. PART NUMBER
1
GA5047515
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399
FAX: 03 53426308
DESCRIPTION
TITLE:
QTY.
Pump, hydraulic drive to suit diaphragm pump inc shaft speed sensor
Motor, hydraulic, 80cc/rev, 25.4mm shaft, Suit spray pump 1
2
F700416600 (adaptor) Adaptor hydraulic motor to UDOR DATECREATED:
UNLESS OTHERWISE SPECIFIED 1/06/2011
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DWG NO.
Zeta 260 - PTO to Hydraulic Drive
1
A3
3
GA4552100
DATE EDITED:
20/08/2012
Plate spacer suit MATERIAL: UDOR pump adapter
1
3
4
Matt
DO NOT SCALE DRAWING
SCALE:1:7.5
SHEET 1 OF 1
4
F700416600 (socket)
Hydraulic motor to pto converter with 2 x grub screws
1
5
GA5071085
SHCS M10 x 25
3
6
GA5000587
Washer 12mm Flat HD
4
7
GA5012461
Nut M12 Nyloc ZP
2
8
GA5000347
Bolt M12 x 70 ZP
2
9
1170171293 (cutdown) Sensor, Spray pump RPM Suit 440 / 450, Raven
1
10
GA5016169
Super Magnet
1
11
GA5067187
Hose Assembly Hydraulic Pump with Extension
1
For machines fitted with 70 series pump RPM monitors:
ITEM NO. PART NUMBER 90-02328 16-40004
DESCRIPTION 70 series RPM monitor & speed sensor - Complete Teejet speed sensor
QTY. 1 1
Chapter 2 - Pumps - 27
Pressure Flow Compensator
ITEM NO. PART NUMBER
1
GA5049425
2
S75-0808
3
GA5007060
4
GA5049430
DESCRIPTION Manual flow control Hydraulic adaptor, Nipple, 1/2" BSPT male x 1/2" BSPP male with o-ring Check Valve (45 LPM) 1/2" BSPP zero bar SHCS M8 x 70 ZP GR12.9
QTY. 1
3
1 4
28 - Special Evolution MY13 Parts Manual - Rev 2
FLUSH TANK
Chapter 3
1
2
3
4
5
6
7
8
ITEM NO.
PART NUMBER
DESCRIPTION
QTY.
1
3000EF_Flush_Tank
Flush Tank to suit 3000L EF
1
A
2
HB-050-90
barb male elbow 1/2"
1
180L Flush Tank - 3000L 3
HB075
4
A114
barb male 3/4"
1
1
5
P24730
Lid, suit foam marker
1
6
GA5006113
Bolt M10x20 ZP 8.8
2
7
GA5000117
Washer 10mm SS Heavy duty
2
8
HB050-90
Hose Barb Elbow 1/2
2
9
temp sight tube flush tank
1
10
GA5009187
O Ring suit exacta tank cap 50X5
1
B
11
GA5000137
Washer 10mm Spring S/S
2
5
10
2
C
1
D
2
RT NUMBER
ank
E e flush tank
F
3
4
6 DESCRIPTION 11 Flush Tank to suit 3000L EF
7 barb male elbow 1/2"
barb male 3/4"
QTY. 1 1 1
1
Lid, suit foam marker
1
Bolt M10x20 ZP 8.8
2
Washer 10mm SS Heavy duty
2
Hose Barb Elbow 1/2
2
1
O Ring suit exacta tank cap 50X5
1
Washer 10mm Spring S/S
2
3 5
10
2 4
5
7 11 6
1
2
3
4
1
7
6
7
8
8
A
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 25/01/2010
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DATE EDITED:
MATERIAL:
17/01/2013
Coen
DO NOT SCALE DRAWING
REV NO TITLE:
CHANGE B
DATE
1-3 M
GOLDACRES
MITCH PH: 03
FAX: 0
DWG NO.
GA4903845 - Fresh Water Tank Kit (3000EF)
SCALE:1:7.5
C
8
SHEET 1 OF 2
9
D
8
3
4
2
7 11
6
3
4
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 25/01/2010
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DATE EDITED:
MATERIAL:
17/01/2013
Coen
DO NOT SCALE DRAWING
REV NO TITLE:
CHANGE Continued ovDeArTEpagEeCN NO.
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399 Chapter 3FA-X:F0l3u53s4h26T30a8nk - 29
DWG NO.
GA4903845 - Fresh Water Tank Kit (3000EF)
A3
SCALE:1:7.5
SHEET 1 OF 2
180L Flush Tank - 3000L
ITEM NO. 1 2 3 4 5 6 7 8 9 10 11
PART NUMBER GA5061120 HB075-90 HB075 HB125 GA5009187 GA5009157 GA5006113 GA5000117 GA5000137 HB050 HOS12sight
DESCRIPTION 180L Flush Water Tank Hose barb, Elbow, 90 degree, 3/4" male thread x3/4" hose Hose barb, Straight, 3/4" male thread x 3/4" hose Hose barb, Straight, 1 1/4" male thread x 1 1/4" hose O-Ring to suit Cap (50x5mm) Tank Lid/Cap Bolt M10 x 20mm Washer 10mm Flat Washer 10mm Spring Hose barb, Straight, 1/2" male thread x 1/2" hose 1/2" Clear Sight Tube
QTY. 1 1 1 1 1 1 2 2 2 2
0.6m
1
2
3
4
5
6
In-line Check Valve ITEM NO. PART NUMBER
1
95502400-1.25 one way valve
DESCRIPTION
QTY. 1
A
2
A114
2
A
2
1
B
B
2
C
C
ITEM NO. 1 2
PART NUMBER GA5017361 HB125
D
REV NO 1
CHANGE
APPL DATE 2
DESCRIPTION
QTY.
Valve non-return 1 1/4"
11-3 MORANG CR
Hose barb, Straight, 1 1/4" male thread x 1 1/4" hoGseOLDACRES MP2HIT:C0H3E5L3L4P2A63R9K93352
FAX: 03 53426308
TITLE:
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS DEBUR ALL EDGES
DATE EDITED:
17/01/2013 Matt
DATE CREATED:
17/02/2010
DRAWN:
Luke M
MATERIAL:
DO NOT SCALE DRAWING
DWG NO:
Inline_Check_Valve_Flush_Tank
SCALE:1:2.5
SHEET 1 OF 1
A4
30 - Special Evolution MY13 Parts Manual - Rev 2
1
2
3
A
400L Flush Tank - 4/5000L
6
B
19
7
C
2
D
4
5
6
ITEM NO. PART NUMBER
1
GA4654320
2
GA5018367
3
F70681A
4
GA5004437
5
GA5004065
6
352022
7
HB-050-90
8
GA5000577
9
GA5000327
10 GA5012461
11 HB100-075-90
12 HB050-90 13 RB150075
14 GA5018315
15 HB075-90
16 RN150125
17 GA5017361
11
18 HB125-90 19 300110
12
4
5
3
13 14 15
E
18 17 16
ITEM NO. 1
F
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
PART NUMBER GA4654320 GA5018367 F7061 81A GA5004437 GA5004065 352022 HB050-90 GA5000577 GA5000327 GA5012461 HB100/075-90 HB050-90 RB150075 GA5018315 HB075-90 RN150125 GA5017361 HB125-90 300110
10 8
9 1
DESCRIPTION
QTY.
Rinse tank frame
Tank 400L underbelly
Ho2 se retaining strap for3 belly tank
4
1
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 8/06/2004
1 DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
L.JOSEPH
DATE EDITED:
MATERIAL:
6 18/01/2013
Matt
DO NOT SCALE DRAWING
Washer 6mm Flat SS
12
Bolt M6 x 20
12
Small Lid D255 includes breather
1
Hose barb, Elbow, 90 degree, 1/2" male thread x 1/2" hose
2
Washer 12mm Flat SS HD
12
Set Screw M12 x 45 ZP GR8.8
6
Nut M12 Nyloc ZP
6
Hose barb, Elbow, 90 degree, 1" male thread x 3/4" hose
1
Hose Barb Elbow 1/2" - (DCI only)
1
Reducing bush 1 ½" to ¾"
1
Ball Valve 20.mm MF Butterfly
1
Hose barb, Elbow, 90 degree, 3/4" male thread x 3/4" hose
1
Reducing nipple 1 1/2" to 1 1/4"
1
Non return valve 1 1/4"
1
Hose barb, Elbow, 90 degree, 1 1/4" male thread x1 1/4" hose 1
Basket Filter D.204x115
1
Chapter 3 - Flush Tank - 31
32 - Special Evolution MY13 Parts Manual - Rev 2
RIGHT HAND POD
Chapter 4
A4 irbag Comp5 ressor & Bo6x Assembly 7
QTY.
sor
1
sor
1
5
tic 5
1
4
er
2
4 3
2
4 4
4
8 A
B
2
C
1
7
8
9
4
D
6
ITEM NO. 1 2 3 4 5 6 7 8 9
PART NUMBER GA4657695 GA4903147 F70254A GA5004883 MACH0041 GA5004917 GA5001043 GA5000961 GA5000903
DESCRIPTION
QTY.
Special EF Airbag Compressor Mount
1
Pre Assembly Air Bag Compressor Box 2010
1
Top retaining plate for plastic foam/air box GA5066955
1
Washer 8mm Flat HD
4
Bolt M8 x 210 (for foam marker box)
REV NO CHANGE
2
DATE ECN NO.
Nut M8 Nyloc
1-3 M2ORANG CR
Washer 16mm Flat SS
GOLDACRES MITCHELL PARK 3352 PH: 043 53426399
Washer 16mm Spring ZP TITLE:
FAX: 03 53426308
4
Bolt M16 x 25
Pod RHS Specia Suit Airbag With No Foa4m
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 2/02/2012
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DWG NO.
GA4903146
A3
DATE EDITED:
MATERIAL:
4
18/01/2013 Luke
DO NOT SCALE DRAWING
SCALE:1:5
Chapter 4SHE-ETR1 OiFg1ht Hand Pod - 33
3 Compres4 sor Box 5
DESCRIPTION
QTY.
Foam Marker Box Bottom
1
Foam Marker Box Lid
1
Air bag compressor only sub assembly
1
1/2" SS hose clamp
2
ir bag compressor box gauge sub assem suit special
1
M5x20mm Button head soc SS
2
M5 washer ss
2
Rod suit foam marker box
1
M12 WASHER
2
15
1/4" BSPP Socket Brass
1
MPT X 3/4"Hose Shank-90 Deg 1
16
1/4" Brass Nipple
2
1/4 Female brass Tee
1
4
Elbow brass 3/8 x 1/4
1
Multi purpose 3/8" ID Red cut 220mm
1
12
witch differential Press. T/S Air Bag
1
14
Back Nut 1"
1
O-Ring 38x3 FPM 75 suit AS40
1
13
12
1 (Loom Prairie Advance Cabinet)
10
9
6
7
2
3
8 7 6
1 17 11
8 A B C D
ITEM NO. PART NUMBER
1
GA5066955
2
GA5066955-2
3
GA4906150
4
GA5000469
5
GA4906170
6
GA5003581
3
4
7
GA5003983
8
GA4572130
9
GA5000587
10
GA5066940
11
HB100/075-90
12
GA5050285
13
GA5048300
14
GA5049290
15
GA5051025
16
GA5016221
17
2052040
18
GA5065820
9 5
18 Loom plug seal
DESCRIPTION
QTY.
Foam Marker Box Bottom
REV NO CHANGE
1 DATE ECN NO. 1-3 MORANG CR
Foam Marker Box Lid
GOLDACRES 1 MITCHELL PARK 3352 PH: 03 53426399
FAX: 03 53426308
Air bag compressor (only sub assemTITLEb: ly)
1
Pre Assm Air Bag Compressor Box 2010
Hose Clamp 1/2" SS
2
Air bag compressor box gauge sub assembly suit special DATE CREATED:
UNLESS OTHERWISE SPECIFIED 1/02/2012
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
JRokebrand
DWG NO.
GA4903147
BHSC M5 x 20mm SS DATE EDITED:
18/01/2013
MATERIAL:
Luke
DO NOT SCALE DRAWING
SCALE:1:5
Washer 5mm SS
SHEET 1 OF 1
1 A3 2 2
Rod suit foam marker box
1
Washer 12mm Flat
2
Socket, 1/4" female thread, Hex, Brass
1
Hose barb, Elbow, 90 degree, 1" male thread x 3/4" hose
1
Nipple, 1/4" male thread x 1/4" male thread, Brass
2
Tee, 1/4" female thread x 1/4" female thread x 1/4" female thread, Brass
1
Elbow 1/4" male thread x 3/8" barb brass
1
Multi purpose 3/8" ID Red, cut 220mm
1
Switch differential Press.T/S Air Bag
1
Back Nut 1"
1
O-Ring 38 x 3mm FPM 75 suit AS40
1
34 - Special Evolution MY13 Parts Manual - Rev 2
3
4
5
6
7
8
TION
QTY.
airbag 319
1
3/8 x 3/8
1
Brass 1/8"x3/8"
1
3/8 x 1/4 Air1 Compressor Assembly
e 3/8 york
1
2
5
3
1
4
ITEM NO. 1 2 3 4 5
PART NUMBER GA5018809 GA5070730 GA5020690 GA5049290 GA5020010
DESCRIPTION
QTY.
Compressor suit airbag 319
1
Elbow Brass 3/8" x 3/8"
1
Nipple reducing, Brass 1/8" x 3/8" Elbow brass 3/8" x 1/4"
REV NO
Valve, Check, 3/8" female thread inlet & outlet, Brass
1
CHANGE
DATE
1
1-3 MO
GO1LDACRES
MITCH PH: 03
FAX: 0
TITLE:
Airbag Compressor ASM MY13
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 27/07/2012
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DWG NO.
GA4906150
DATE EDITED:
MATERIAL:
18/01/2013
3
4
Coen
DO NOT SCALE DRAWING
SCALE:1:2
SHEET 1 OF 1
Chapter 4 - Right Hand Pod - 35
3
4
DESCRIPTION
QTY.
1/4 Female brass Tee
1
1/4" 90 Deg Elbow
1
0404 BSPTM BSPCPFoS 9m0' Eplbroewssor1Gauge
Small Face Gauge 160 psi
1
1/4" Brass Nipple
1
5
4
6 A
B
APPL DATE
5 1 2
C
3
ITEM NO. PART NUMBER DESCRIPTION
1
GA5048300
2
S49-0404
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS
DATE CREATED:
1/08/2012
3 S82-0404 DEBUR ALL EDGES
DRAWN:
DATE EDITED:
UNTOL. DIMENSIONS Luke M
18/01/2013 OPEN DIM
± 0.20 MATERIAL:
Tee, 1/4" female thread x 1/4" female thread x 1/4" female
thread, Brass Hydraulic coupling,
1-3 MORANG CR
EGlbOowL, 9D0AdeCgrReeE, S1/MPF4AH"ITX:BC0:SH30P3E5TL35L43mP24A62a36Rl93eK903x83152/4"
BSPT maleTITLE: Air bag compressor box gauge sub assem suit special
Hydraulic adapter, Elbow, 90 degree, 1/4" BSP male x 1/4" BSP
female swiDvGWeAGl4N9O0:6170
A4
Luke 4
GA4948470 ONE DEC. PL. ± 0.10
TWO DEC. PL. ± 0.05
Gauge, Pressure, Small face, 160psi
ANGULAR
± 0°30' DO NOT SCALE DRAWING
SCALE:1:2
SHEET 1 OF 1
5
GA5050285
Nipple, 1/4" male thread x 1/4" male thread, Brass
QTY. 1
1
1 1 1
36 - Special Evolution MY13 Parts Manual - Rev 2
F4 oam Mark5 er Box 6
7
QTY.
1
bly
1
1
1
1
2
1
6
1
1
1
24
1
4
3
1
1
1
3
8 A
B
12 13 14 1
C
8
17 16 6 5 6
D
11 10
9
7
Loom plug seal
ITEM NO. 1 2 3 4
5
4
6
7
8
9
10
11
12
13
14
15
16
17
PART NUMBER GA5066955-1 GA4906160 GA4906165 GA4912005
DESCRIPTION
Foam Marker Box BREoVtNtoOm CHANGE
DATE ECN NO. 9 WARINGA DR
GOLDACRES Foam marker compressor sub assembly
MITCHELL PARK 3352 PH: 03 53426399
FAX: 03 53426308
Foam marker solenToITLiEd: sub assembly
Foam Marker Box Assembly MY13
Foam marker exhaust valve
DATE:
UNLESS OTHERWISE SPECIFIED 18/01/2013
Tee, 1/4" female thread x 1/4" female thread x 1/4" female DIMENSIONS ARE IN MILLIMETERS DRAWN: GA5048300 DEBUR ALL EDGES
thread, Brass PART QUANTITY:
MATERIAL:
DWG NO.
Foam Marker Box Assembly MY13
A3
1
GA5015643
Needle valve DO NOT SCALE DRAWING
SCALE:1:3.5
SHEET 1 OF 1
GA5017703
Grommet grey 19 x 5mm
GA5012199
29mm Neoprene Grommet
GA5065820
O-ring, 38 x 3mm, Suits AS40 plumbing fittings
HB100/075-90
Hose barb, Elbow, 90 degree, 1" male thread x 3/4" hose
2052040
Back Nut 1"
GA4572130
Rod suit foam marker box
GA5003983
Washer 5mm Flat SS
GA5003581
BHCS M5 x 20mm SS
GA5003975
Nut M5 Nyloc SS
GA5013809
Reducing Nipple 1/4" x 1/8"
GA5002565
Washer 3/8" x 1" Flat SS
QTY. 1 1 1 1
1
2 1 6 1 1 1 1 4 3 1 1 1
Chapter 4 - Right Hand Pod - 37
alve 3/8 york
1
Brass Nipple
1
e Brass 1/4"
1
brass 1/4"x1/8"
1
ead 1/4 X 1/4
1
Solenoid
1
ss Elbow
1
Elbow Long
1
Foam Marker Air Compressor
B
6 7 8 9 10
C
5
4
3
D
2
1
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA5018806
Air compressor suit foam marker
2
2
GA5020690
3
GA5020010
4
GA5045085
5
GA5048300
Reducing nipple, 1/8" male thread x 3R/E8V"NmOaleCtHhArNeGadE, Brass
1 DATE
ECN NO.
Valve, Check, 3/8" female thread inlet & outlet, Brass
1 1-3 MORANG CR
GOLDACRES Reducing nipple, 3/8" male thread x 1/4" male thread, Brass
MITCHELL PARK 3352
1 PH: 03 53426399
FAX: 03 53426308
Tee, 1/4" female thread x 1/4" femaleTITtLhE:read x 1/4" female
thread, Brass
Foam marker compressor sub asse1mbly
6
GA5066950
Barb elbow brass 1/4" x 1/8" UNLESS OTHERWISE SPECIFIED
DATE CREATED:
27/07/2012
DWG NO.
7
GA5008343
Elbow male thread 1/4" DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
x
1/4"
GA4906160
1
1
A3
DATE EDITED:
MATERIAL:
3
8 4 GA5002959
1D8a/v0i1d/20S13olenoid valve, EleDcO tNrOTicSCAoLEvDeRArWINaGir, MAC SCALE:1:3
1 SHEET 1 OF 1
9
GA5048340
Elbow, 90 degree, 1/4" male thread x 1/4" hose, Brass
1
10
GA5008347
Elbow male barb 1/4" x 1/4" Long 40 mm
1
38 - Special Evolution MY13 Parts Manual - Rev 2
QTY. 1 1
1
1 1 1 1 2 2
1
1 1 1 1 1 2
1
1 1
4
5
6
7
Foam Marker Exhaust Valve
8 9 16 18 19 16 17
8 9 4 3
8 A
B
2
1
10
5
11
C
6
12
13
15
14
7
ITEM NO. PART NUMBER
1
GA4572000
DESCRIPTION Air Chemsaver Body
QTY.
D
1
2
GA5045145
Elbow Brass 6mm x 1/8" BSPT
1
3
GA5016233
Pneumatic fitting, Elbow, 90 degree, 1/4" BSP male x 6mm push type, Metal
1
4
GA5045140
Pneumatic fitting, Nipple, 1/4" BSPT male x 6mm push type, Brass
1
5
GA4572005
Air Chemsaver Piston
1
6
GA4572010
Air Chemsaver Washer
1
7
GA5008343
8
GA5048340
9
GA5048300
10
CP50676-VI
11
GA5045090
Elbow male thread 1/4" x 1/4"
1
Elbow, 90 degree, 1/4" maRlEeVtNhOreadCxHA1N/4G"Ehose, Brass
DATE 2ECN NO.
1-3 MORANG CR
GOLDACRES Tee, 1/4" female thread x 1/4" female thread x 1/4" female
thread, Brass
MITCHELL PARK 3352
PH: 03 532426399
FAX: 03 53426308
Cup Seal (Foam Marker EFTIxToLhEa:amustmVaarlvkee)r exhaust valve
1
Spring foam marker 14.2 x 14
1
12
QJ8U3N5LE5SS-1O-TH4E-RNWYISERSPECIFIEEDxhaD1uA3TE/sC1Rt1EAV/TE2D:0a0l9ve Diaphagm DWG NO.
13
5860036 Diaphragm Nozzle Body DIMENSIONS ARE IN MILLIMETERS DRAWN: DEBUR ALL EDGES
DATE EDITED:
MATERIAL:
GA4912005
18/01/2013
4
14
QJ4Lu6k7e 6-1-4-NYR
Nozzle Cap DO NOT SCALE DRAWING
SCALE:1:2
1
A3
1
SHEET 1 OF 2
1
15
CP19438-EPR
Seat Washer, Rubber
1
16
GA5045085
Reducing nipple, 3/8" male thread x 1/4" male thread, Brass
2
17
GA5048305
Elbow, 90 degree, 1/4" BSP male x 1/4" BSP female, Brass
1
18
GA5048090
Clamp P 35mm 56487
1
19
GA5020010
Valve, Check, 3/8" female thread inlet & outlet, Brass
1
Chapter 4 - Right Hand Pod - 39
4
5
6
7
8
QTY.
8"
1
1/8"
2
A
marker 2
e
2
Foam Marker Solenoid
B
2
3
4
QTY. 1
8 8 8
5
4
6
7
1
4
3
2
2 ITEM NO. PART NUMBER DESCRIPTION
1
GA5016559
Tee female brass 1/8"
2
GA5066950
Barb elbow brass 1/4" x 1/8"
3
GA5018395
Solenoid liquid suit foam marker
4
GA5066935
Nipple brass 1/8" x 1/8"
Foam Marker Pod On Chassis
8 C
A
QTY. D 1 2 2 B 2
REV NO CHANGE
DATE ECN NO.
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399
FAX: 03 53426308
C
TITLE:
Foam marker solenoid sub assem
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 27/07/2012
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Name
DWG NO.
GA4906165
A3
DATE EDITED:
MATERIAL:
18/01/2013
4
David
DO NOT SCALE DRAWING
SCALE:1:2
SHEET 1 OF 1
D
1
5
432
ITEM NO. 1 2 3 4 5
PART NUMBER GA4654413 GA5001009 GA5000961 GA5000903 GA5052345
DESCRIPTION RH Pod Frame suit Special M16 washer Zinc coated Washer 16mm Spring ZP Bolt M16 x 25 75 x 75 mm square tube insert bRlaEcVkNO
40 - Special Evolution MY13 Parts Manual - Rev 2
TITLE:
QTY.
1
8
8
8
CHANGE
2 DATE ECN NO.
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399 FAX: 03 53426308
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 24/11/2009 DIMENSIONS ARE IN MILLIMETERS DRAWN:
DWG NO.
A3
Chapter 5
LEFT HAND POD
4
5
6
7
8
Left Hand Pod - Suit 170L/min pump A
2 8
7 10
11
9
15
14 13 12
10 B 3
11
1
10
C
7
11
6
10
19
4 5
18 16 17
10 8
10
D
8
GA4903085
LH Pod Suit 170L/min Pump
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA4657690 Special EF Left Pod Frame with 3-way valve
1
2
GA4903830 Teejet 3 way valve manifold assembly to suit special ef
1
3
GA4903825 EF special pre-assembly pump suction
1
4
GA4903815 EF Special Pressure Manifold
1
5
GA4903137 Pre-assembled fill system suit Special
REV NO CHANGE
6
GA4903082 Pre-assembled Chem probe / Transcal tap suit specials
1
DATE ECN NO.
91WARINGA DR
7
GA5006705 Exhaust clamp C8 2"
8
GA5011495 Bolt M8 x 90 ZP GR8.8
GOLDACRES MP2HIT:C0H3E5L3L4P2A63R9K93352 1F0AX: 03 53426308
TITLE:
9
GA5004711 Bolt M8 x 25 ZP GR8.8
Prairie EF Special Complete Left Pod 5with 3-way
10 11
4
GA5004883 Washer 8mm Flat ZP Heavy Duty
DATE:
GA50049UD1NIM7LEESNSSIOOTNHSERNAWRuEIStIENSMMPEI8LCLIIFMNIEEDyTElRoScD2RZ1AW/N0P: 1/2013
DEBUR ALL EDGES
T.Watts
DWG NO.
GA4903805
PART QUANTITY:
MATERIAL:
1
DO NOT SCALE DRAWING
SCALE:1:8
29
14
A3
Continued over page
SHEET 1 OF 2
Chapter 5 - Left Hand Pod - 41
Left Hand Pod - Suit 170L/min pump
ITEM NO. PART NUMBER DESCRIPTION
QTY.
12 GA5000903 Bolt M16 x 25 ZP GR8.8
8
13 GA5000961 Washer 16mm Spring ZP
8
14 GA5001009 Washer 16mm Flat ZP Heavy Duty
8
15 GA5004919 Washer 8mm Spring SS
5
16 GA5003983 Washer 5mm Flat SS
3
17 GA5003975 Nut M5 Nyloc SS
3
3 DESCRIPTION T-piece 3xAS40 M8 inserts
18
GA54051230
19 QTY. GA5018800 1
CSCS M5 5x 16 Countersink SS A2-670
7
Rinsing socket, 3 pin, Micromatic / Enviro drum coupling
3
8
1
in hose tail AS40/33/90 degree
1
ose barb 90 degree 1" Banjo Flow1Control Valve - Suit 170L/min Pump
t 3 way regulator valve 6 second
1
g Altek AS40 to 1" NPT male thread
3
Plug in hose tail AS40/AS40
1
AS40 to 1" Male Thread
1
Safety pin AS40
6
in hose tail AS40/25/90 degree
2
Ball Valve Banjo 1"
1
8 9
1
2
9
8 5
6 5
4
8 5 7 10
3
GA4903830
Flow Control Valve - Suit 170L/min Pump
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA5065560
Tee, AS40 female, M8 inserts, Altek
1
2
GA5065620
3
HB100-90
Hose barb, Elbow, 90 degree, AS40 x 33mm hose barb, Altek
1
REV NO CHANGE
DATE ECN NO
Hose barb, Elbow, 90 degree, 1" male x 1" hose
1
1-3 MORANG CR
4
GOLDACRES 344BR-34-03CEC Regulating valve, Ball, 3 way, 1" NPT, 12v, Red indicator,Teejet
1
MITCHELL PARK 3 PH: 03 53426399
5
GA4582385
Coupling, AS40 female x 1" NPT male thread TITLE:
FAX: 03 53426308
3
6
GA5065735
Plumbing adaptor, AS40 male x AS40 male, AltTeekejet 3 way valve manifo1ld assy to suit special ef
7
GA5065600
PlumUbNiLnESgS
OaTdHaERpWtIoSEr,SPAECSI4FIE0D
male x 1" DATE CREATED: 14/01/2010
male
threadD,WAGltNeOk.
1
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
T.Watts
GA4903830Continued over page
A
DATE EDITED:
MATERIAL:
21/01/2013
3
4
Matt
DO NOT SCALE DRAWING
SCALE:1:3
SHEET 1 OF 2
42 - Special Evolution MY13 Parts Manual - Rev 2
Flow Control Valve - Suit 170L/min Pump
ITEM NO. 8 9 10
PART NUMBER GA5065690 GA5065615 UV100FP
DESCRIPTION Safety pin, Suit AS40 plumbing fittings, Altek Hose barb, Elbow 90 degree, AS40 x 25mm, Altek Valve, Ball, 1" female thread inlet / outlet, Full port, Lever handle
QTY. 6 2 1
Suction Filter - Suit 170L/min Pump
3
4
5
6
7
QTY.
1
1 1
4
2
6
2
5
2
1
1
7
1
2
8 A
B
9 8
3
C
4
6 D 5 1
GA4903825
Suction Filter - Suit 170L/min Pump
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
316063
2
4542236
3
GA5009187
4
116640
Suction Filter 1 1/2" S.T. 5R0EVMNOeshCHANGE
DATE ECN NO.
1
1-3 MORANG CR
Valve,
Ball,
3
way,
1
1/2"
female
GOLDACRES thread
inlet
/
outlet,
AragMITCHELL PARK 3352 PH: 03 53426399
1
FAX: 03 53426308
O-Ring, 60 x 5.5mm, suitsTITeLEx: acta tank cap
1
Prairie EF 4000 Suction tap assembly
Hose barb, Elbow, 90 degree, 1 1/2" fly nut end x 40mm hose
2
5
G10061
DATE:
O-Ring, 30 x 3mm UNLESS OTHERWISE SPECIFIED 21/01/2013
DIMENSIONS ARE IN MILLIMETERS DRAWN: DEBUR ALL EDGES
DWG NO.
GA4903825
A3 2
6
2002060
PART QUANTITY:
Fly nut, 1 1/2", MATERIAL: Arag
3
4
1
DO NOT SCALE DRAWING
SCALE:1:3
2
SHEET 2 OF 2
7
2502060
Nipple, 1 1/2" male thread x 1 1/2" male thread, Arag
1
8
HB125-90
Hose barb, Elbow, 90 degree, 1 1/4" male thread x 1 1/4' hose
1
9
RB150125
Reducing bush, 1 1/2" male thread x 1 1/4" female thread
1
Chapter 5 - Left Hand Pod - 43
Pressure Manifold
3
4
5
DESCRIPTION ss piece 4xAS40
QTY. 1
e 3xAS40 M8 inserts
1
hose tail AS40/AS40
1
k fit valve 2 WAY
3
1
hose tail AS40/25/90 degree
1
plug AS40 3/4 BSPT female
1
ug AS40 G1/4 female 1
hose tail AS24/20/90
2
afety pin AS40
7
16
S24 Safety Pin
3
d cap Plug AS40
4
5
ace Gauge 160 psi
1
POLY PIPE PLUG
1
14
hose tail AS24/15/90
1
90 deg 3/4" x 1" Banjo 1
7
10
2
10
11
9
4
6
15 11
9
7
8
A
13
8
B
4
6
C
1 3 4
D
4
12
12
GA4903815
Pressure Manifold
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA5065565
Plumbing coupling, Cross, AS40 feREmV aNlOe inCleHtAsNG/ Eoutlets, Altek DATE 1ECN NO.
2
GA5065560
3
GA5065735
GOLDACRES Tee, AS40 female, M8 inserts, Altek
Plumbing adaptor, AS40 male x AS40 male, Altek
1 1-3 MORANG CR
MITCHELL PARK 3352
1 PH: 03 53426399
FAX: 03 53426308
TITLE:
4
GA5065545
Valve, Quick fit flip top, 2 way, ASP4ra0irime EaFle40x00ASSp2e4ciafel Pmreaslseurxe MAaSn4if0old 3
female, Altek
3
5
8460-3/4-300
4
Pressure relief valve, 300psi, Inlet 3/4" thread female, Outlet 3/4" DATE:
UNLESS OTHERWISE SPECIFIED 21/01/2013
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
T.Watts
DWG NO.
GA 903815
th1read male,Teejet PARTQUANTITY:
MATERIAL:
DO NOT SCALE DRAWING
SCALE:1:3
SHEET 3 OF 3
A3
1
6
GA5065615
Hose barb, Elbow 90 degree, AS40 x 25mm, Altek
1
7
GA4583060
Dummy Plug AS40 3/4" BSPT female
1
8
GA4582160
Plumbing adaptor, AS40 male x 1/4" female thread, Delrin
1
9
GA5065675
Hose barb, Elbow, 90 degree, AS24 female x 20mm hose, Altek
2
10 GA5065690
Safety pin, Suit AS40 plumbing fittings, Altek
7
11 GA5065695
Safety pin AS24
3
12 GA5065680
Plug, AS40 male, Altek
4
13 GA4948470
Gauge, Pressure, Small face, 160psi
1
14 PLUG025
Plug, 1/4" male thread
1
15 GA5065750
Hose barb, Elbow, 90 degree, AS24 female x 15mm hose, Altek
1
16
HB075-100-90
Hose Barb, Elbow, 90 degree, 3/4" male thread x 1" hose
1
44 - Special Evolution MY13 Parts Manual - Rev 2
Fill Manifold 2
NUMBER
3
DESCRIPTION
4
QTY.
295
2" fill cam lock fitting suit "Prairie Special"
1
565
Cross piece 4xAS40
1
560
T-piece 3xAS40 M8 inserts
1
545
Quick fit valve 2 WAY
4
675
female hose tail AS24/20/90
3
750
female hose tail AS24/15/90
1
680
Blind cap Plug AS40
4
4FP
Ball Valve Full Port 2"M x 2"F
1
0
Hose Barb Elbow 2"
1
735
Plug in hose tail AS40/AS40
1
690
Safety pin AS40
11
695
AS24 Safety Pin
4
600
AS40 to 1" Male Thread
1
5
11
2
11 13
9 8
5
7 12
6
7 12 6
7
8
A
11
B
4
11
11
C
3
10
D
GA4903137
1 12 5 11
Note: This fitting replaced with 1/2" elbow when hopper fitted
Fill Manifold
11 4
7
5 4
7
REV NO CHANGE
DATE ECN NO.
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399 FAX: 03 53426308
TITLE:
Pre-assembled fill system suit Special
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA4582295
DATE:
UNLESS OTHERWISE SPECIFIED 31/01/2013
2"
Fill
Cam
Lock,
fitting suit Prairie Special DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
A. McAndrew
DWG NO.
GA4903137
1
A3
PART QUANTITY:
MATERIAL:
2
2
G3 A5065675
H4 ose barb, Elbow, 90 deg1ree, AS24 female x 20mm DO NOT SCALE DRAWING hoseSC,AALE:1:l3tek
3
SHEET 1 OF 1
3
GA5065680
Plug, AS40 male, Altek
4
4
VSMT204FP
Ball Valve, 2 Way, 2" Male NPT x 2" Female NPT, Full Port
1
5
HB200-90
Hose barb, Elbow, 90 degree, 2" male thread x 2" hose
1
6
GA5065735
Plumbing adaptor, AS40 male x AS40 male, Altek
1
7
GA5065690
Safety pin, Suit AS40 plumbing fittings, Altek
11
8
GA5065695
Safety pin AS24
4
9
GA5065600
Plumbing adaptor, AS40 male x 1" male thread, Altek
1
10 GA5065565
Plumbing coupling, Cross, AS40 female inlets / outlets, Altek
1
11 GA5065560
Tee, AS40 female, M8 inserts, Altek
1
12 GA5065545
Valve, Quick fit flip top, 2 way, AS40 male x AS24 female x AS40 female, Altek
4
13 GA5065750
Hose barb, Elbow, 90 degree, AS24 female x 15mm hose, Altek
1
Chapter 5 - Left Hand Pod - 45
1
2
3
4
Chem Probe/Transcal Tap
4 5
5
6
ITEM NO. PART NUMBER
1
100B
2
HB100
3
100PL
4
UV100FP
5
GA5002077
6
GA5001491
Cam lo m
Ho
Ba 25 Chain Lo
2
1 3
REV NO CH
GA4903082
Chemical Probe
G
ITEM NO. PART NUMBER
1
100B
DESCRIPTION Cam lever, 1 female coupler, 1" male thread, Banjo
QTY. 1
TITLE:
Pre-assembl
2
HB100
3
100PL
Hose
barb,
Straight,
1"
male
thread
x
1"
hosUeN,LBESaS nOTjoHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS
1 DATE:
22/01/2013
DRAWN:
Cam lever, Male plug, 1", Banjo
DEBUR ALL EDGES
PART QUANTITY:
1 Scott Stowe
MATERIAL:
DWG NO.
GA4903082
1
4 2 UV100FP
3 Valve, Ball, 1" female th4read inlet / outlet, Full port,1Lever handle 1 DO NOT SCALE DRAWING
SCALE:1:2
5
GA5002077
Key ring, 25mm, SS
2
6
GA5001491
Chain 2mm x 20 SS 316 (cut 150mm long)(not shown)
1
46 - Special Evolution MY13 Parts Manual - Rev 2
4
5
6
7
8
QTY.
ay valve
1
anifold ecial
1 1
Left Hand Pod - Suit 260L/min Pump
A
ap suit specials
1
2
6
14
5
10
8
5
29
9
14
8
7 13 8
8
B
8
5
pecial ef with
1
n suit 250
1
3
10
1
3
11
3
1
12
C
3
6889
15 5
9
8
4
2
19
D
8
18 16 17
6
GA4903806
LH Pod - Suit 260L/min Pump
ITEM NO. 1 2 3 4 5 6 7 8 9 410 11 12 13 14 15 16 17 18 19
PART NUMBER DNESoCteRI:PLTaIOrgNer plumbing to suit 250 pump
QTY.
GA4657690
Special EF Left Pod Frame with 3-way valve
1
GA4903815
EF Special Pressure Manifold
1
GA4903137 GA4903082 GA5006705 GA5011495 GA5004711
Pre-assembled fill system suit SpecRiEaVl NO CHANGE
DAT1E ECN NO.
Pre-assembled Chem probe / Transcal tap suit specials
9 W1ARINGA DR
Exhaust clamp C8 2"
GOLDACRES MITCHELL PARK 3352 PFAHX2: 0: 3035354324623693908
Bolt M8 x 90 ZP GR8.8 Bolt M8 x 25 ZP GR8.8
TITLE:
10
Prairie EF Special Complete Left Pod with 3-way valve suit 250
5
GA5004883
Washer 8mm Flat ZP UNLESS OTHERWISE SPECIFIED
DATE:
22/01/2013
Heavy
DutyDWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
GA5004917 Nut M8 Nyloc ZP DEBUR ALL EDGES PART QUANTITY:
Luke M
MATERIAL:
GA4903806
GA5000903
1 Bolt M16 x 25 ZP GR8.8 DO NOT SCALE DRAWING
SCALE:1:7.5
29
A3
14
8 SHEET 1 OF 1
GA5000961
Washer 16mm Spring ZP
8
GA5001009
Washer 16mm Flat ZP Heavy Duty
8
GA5004919
Washer 8mm Spring SS
5
GA4903831
Teejet 3 way valve manifold assy to suit special ef with 260
1
GA4903826
Special pre assembly pump suction suit 260
1
GA5003983
Washer 5mm Flat SS
3
GA5003975
Nut M5 Nyloc SS
3
GA5051230
CSCS M5 x 16 Countersink SS A2-70
3
GA5018800
Rinsing socket, 3 pin, Micromatic / Enviro drum coupling
1
Chapter 5 - Left Hand Pod - 47
4
5
6
7
QTY. Flow Control Valve - Suit 260L/min Pump 1
1
1
1
d
3
10
1
1
6
8
1
1
1
1
8 A
B
9
6 2
5
5
C
8
4
5
7 8
11
3
D
GA4903831
Flow Control Valve - Suit 260L/min Pump
ITEM NO. 1 2 3 4 5 6 7 8 9 10 11
4
PART NUMBER DESCRIPTION
QTY.
GA5065560
Tee, AS40 female, M8 inserts, Altek
1
GA5065620
Hose barb, Elbow, 90 degree, AS40 x 33mm hose barb, Altek
1
HB100-90
Hose barb, Elbow, 90 degree, 1" male x 1" hose, Banjo
1
344BR-34-03CEC Regulating valve, Ball, 3 way, 1" NPT, 12v, Red indicator,Teejet
1
GA4582385 GA5065735 GA5065600 GA5065690 GA5065615
Coupling, AS40 female x 1" NPT male thread
3
REV NO CHANGE
Plumbing adaptor, AS40 male x AS40 male, Altek
DATE ECN NO.
1 1-3 MORANG CR
GOLDACRES Plumbing adaptor, AS40 male x 1" male thread, Altek
1
MITCHELL PARK 3352 PH: 03 53426399
Safety pin, Suit AS40 plumbing fittings, Altek
6 FAX: 03 53426308
TITLE:
Hose barb, Elbow 90 degree, AS40 Txe2e5jemtm3,wAalteykvalve manifold assy1to suit special ef with
GA5065625
Hose barb, Elbow, 90 degree, AS40 male x 39mm barb, Altek
1
UV100FP
UNLESS
OTHERWVISaElSvPeE,CBIFaIElDl,
1"
DATE CREATED:
1fe4/m01a/2l0e10thread
inlet
/
oDuWtlGetN,OF.ull
por t,
Lever
handle
1
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
GA4903831
A3
DATE EDITED:
MATERIAL:
22/01/2013
Matt
DO NOT SCALE DRAWING
SCALE:1:4
SHEET 1 OF 2
48 - Special Evolution MY13 Parts Manual - Rev 2
4
5
6
7
Suction Filter Assy - Suit 260L/min Pump
7 8 6 8
7 2
8 A
B
1
C
3
9
4
5 D
GA4903826
Suction Filter - Suit 260L/min Pump
ITEM NO. 1 2 3 4 5 6 7 8 9
PART NUMBER 317072 2502070 4542237 RB200125 HB125-90 GA5048385 2002070 116752 GA5009187
DESCRIPTION
QTY.
Filter, Suction, 2" male inlet & outlet, 32 mesh screen, Arag
1
Nipple, 2" male thread x 2" male thread, Arag
1
Valve, Ball, 3 way, 2" female thread inlet & outlet, Arag
1
Reducing bush, 2" male thread x 1 1/4" female thread, Banjo
1
Hose barb, Elbow, 90 degree, 1 1/4" male thread x 1 1/4" hose
1
O-Ring, 42.5 x 2.62mm, BS131
4
Fly nut, 2", ARAG
REV NO CHANGE
D2ATE ECN NO.
Hose barb, Elbow, 90 degree, 2" fly nut end x 52mm hose, Arag
21-3 MORANG CR
GOLDACRES O-Ring, 60 x 5.5mm, suits exacta tank cap
MITCHELL PARK 3352
2PH: 03 53426399
FAX: 03 53426308
TITLE:
Special pre assembly pump suction suit 250
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 16/08/2005
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DWG NO.
GA4903826
A3
DATE EDITED:
MATERIAL:
22/01/2013
4
Matt
DO NOT SCALE DRAWING
SCALE:1:5
SHEET 1 OF 1
Chapter 5 - Left Hand Pod - 49
Chemical Probe
GA4948250 Complete Kit
ITEM NO. 1 2 3
PART NUMBER GA5013603 HOS25PVC HB100-90
DESCRIPTION
QTY.
Poly Pipe 25 x 650mm
1
Hose, Suction, PVC, 25mm, Black
1
Hose barb, Elbow, 90 degree, 1" malex1"hose,Banjo
1
4
100E
Cam lever, 1" male coupling x 1" hose barb, Banjo
1
5
G A5018309
Valve, Ball, 12mm female thread inlet / outlet, Lever handle, SS
1
6
GA5001681
Hose Clamp, 1" SS (20-32 /12W)
Enviro coupling & hose
2
GA5020600 Complete Kit
ITEM NO. 1 2 3 4 5
PART NUMBER GA5018803 100E GA5001681 HOS25PVC HB100
DESCRIPTION Micromatic drum valve coupling, 3 pin,Viton seals Cam lever, 1" male coupling x 1" hose barb, Banjo Hose Clamp, 1" SS (20-32/12W) Hose, Suction, PVC, 25mm, Black (Suit Enviro Chem Probe) Hose barb, Straight, 1" male thread x 1" hose, Banjo
QTY.
1
1
2
1
1
50 - Special Evolution MY13 Parts Manual - Rev 2
DCI - N/A
Chapter 6
Chapter 6 - DCI - 51
52 - Special Evolution MY13 Parts Manual - Rev 2
DUAL PRODUCT - N/A
Chapter 7
Chapter 7 - Dual Product - 53
54 - Special Evolution MY13 Parts Manual - Rev 2
Chapter 8
INDUCTION HOPPER
3
4
5
6
7
8
CRIPTION
QTY.
1 ed 40L hopper tank 1
40L Induction Hopper
1
2
GA4904225
40L Induction Hopper
ITEM NO. PART NUMBER
1
GA4903047-40
2
GA4903111
DESCRIPTION Pre-assembled 40L hopper frame suit Special EF Pre-assembled 40L hopper tank
QTY. 1 1
REV NO CHANGE
DATE
1-3 M
GOLDACRES
MITC PH: 0
FAX:
TITLE:
Hopper 40L Frame & Tank Special
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 30/08/2012
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Dave
DWG NO.
GA4904225
DATE EDITED:
MATERIAL:
31/01/2013
3
4
Matt
DO NOT SCALE DRAWING
SCALE:1:8
SHEET 1 OF 1
Chapter 8 - Induction Hopper - 55
ADV ADV ADV t ADV
8.8
ed 8.8 er
GR8.8 dle DV g ated
duty er Spring Short
e m
QTY. 1 1 1 1 1 1 2 4 8 2 4 1 1 1 1 1 1 2 2 4 1 1 1 1
40L Hopper Frame
3
4
5
19 7
6
7
21 15
9 11 13 16
10 7 6 23
2
8 A
17 14
B
11
C
10
9
20
11
24 8 9 19 5 12 1 22 18
D
wn to screw
4 11 9 8
1.0
grease nipples added to arms
9/8/07 RR
REV NO CHANGE
DATE ECN NO.
9 WARINGA DR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399 FAX: 03 53426308
TITLE:
40L hopper frame suit Special EF
GA4903047-40 40L Induction Hopper Frame
DATE:
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS
8/11/2013
DRAWN:
DEBUR ALL EDGES
Scott Stowe
DWG NO.
GA4903047-40
ITEM NO. PART NUMBER
DESCRIPTION PART QUANTITY:
MATERIAL:
3
4
1
DO NOT SCALE DRAWING
SCALE:1:7.5
1
GA4653420
Induction Hopper chassis Mount ADV
SHEET 2 OF 2
A3
QTY. 1
2
GA4653440
Induction Hopper arm Upper ADV
1
3
GA4653445
Induction Hopper arm Lower ADV
1
4
GA4653470
Induction Hopper, tank support 40L suit EF range
1
5
GA5000559
Nut M12 Hex ZP
1
6
GA5050330
SHCS M12 x 20 ZP GR12.9
1
7
GA5000855
Bolt M16 x 110 ZP GR8.8
2
8
GA5001029
Nut M16 Nyloc ZP
4
9
GA5001009
Washer 16mm Flat ZP Heavy Duty
8
10 GA5000879
Bolt M16 x 180 ZP GR8.8
2
11 F70121A
Hopper spring retainer 5mm SS
4
Continued over page
56 - Special Evolution MY13 Parts Manual - Rev 2
QTY.
1
1
1 2 23 23 23 1 2 1 4 2 2
1
w1
e1 2 2
1
1
1
4 1 1 1
40L Hopper Frame
ITEM NO. PART NUMBER DESCRIPTION
12 GA5012461
Nut M12 Nyloc ZP
13 GA5000327
Set Screw M12 x 45 ZP GR8.8
14 GA5010811
Latch handle 16mm Rod
15 GA4653490
Induction Hopper, latch ADV
16 GA5007329
Spring compression, 76.2mm x 25.4 x 3.15mm, gold
17 GA5075130
Roll pin M8 x 30mm coated
18 SP-IH-009mach Hopper Latch Pin (12mm RND)
19 GA5000117
Washer 10mm Flat SS Heavy Duty
20 GA5007073
Spring,Tension, 38.2 OD x 284.3 long x 3.55mm
21 GA5012203
Grease nipple, Short, 1/4" UNF
22 GA5011139
Bolt M10 x 100 ZP GR4.6
23 GA5000141
Nut M10 Nyloc ZP
24 GA5052905
Insert, suit 12mm Hole, Black, plastic
4
5
6
7
40L Hopper Tank
20 5 10 6 7
12
11
17
13 2
QTY. 1 1 1 1 1 1 1 2 2 4 1 1 1
8
A
3
19
7
6
B
4
5
C
5 18 6 7 8 9
1
GA4903111
40L Induction Hopper Tank
24 23 25
D
14 15 22 16 22 21
Continued over page
REV NO
CHANGE
DATE ECN NO.
Chapter 8 - In1d-3uMcOtiRoAnNGHCoRpper - 57
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399
FAX: 03 53426308
TITLE:
Pre-assembled 40L hopper tank
40L Hopper Tank
ITEM NO. PART NUMBER
1
GA4903105
2
GA4901044
3
GA5003333
4
GA5004547
5
GA5051230
6
GA5003983
7
GA5003975
8
GA5009841
9
GA5004707
10 F70275A
11 GA5000587
12 GA5000559
13 GA5012461
14 GA5018321
15 GA5020355
16 GA5070150 17 GA5001491 18 GA5007071 19 GA5012981 20 GA4903111-2 21 GA4903111-1 22 GA5000469 23 2502021 24 GA5012375 25 GA5070110
DESCRIPTION Valve assembly, Induction hopper bottom, Suit 40, 60, 70L hopper Tank, Induction hopper 40L, Round, Green, without lid Lid suit GA4901044 Induction hopper 40L, Round, Green 70mm ZP butt hinge CSCS M5 x 16 Countersink SS A2-70 Washer 5mm Flat SS Nut M5 Nyloc SS Handle, Black, Heavy duty, Polyethylene SHCS M8 x 20 ZP GR12.9 Hopper level indicator 40L Washer 12mm Flat ZP Heavy Duty Nut M12 Hex ZP Nut M12 Nyloc ZP Valve, Ball, 1/4" female thread inlet / outlet, Lever handle, SS Hose barb, Brass, Elbow, 90 degree, 1/4" male thread x 1/2" hose, No shoulder Tee 13mm x1/2" female branch Chain 2mm x 20 SS 316 Latch, Adjustable, Induction Hopper Lid Pinchweld, Side bulb, Induction hopper seal Rinse Assembly Hopper 40l Cam Lock Assembly suit 40l Hopper Hose clamp, 1/2", SS, 12-20/9W3 Long Thread Nipple 1/2" Nut brass & tail 1/2" Nut 1/2" BSPT Hex Lock Brass
QTY. 1 1 1 2 23 23 23 1 2 1 4 2 2 1
1
1 2 2 1 1 1 4 1 1 1
58 - Special Evolution MY13 Parts Manual - Rev 2
3
4
5
6
DESCRIPTION
QTY.
Hopper Rinse Induction hopper rinse nozzle
1
Push down valve
1
Nozzle
Sub
Assembly
Tank Rinsing Nozzle 1/2" F thread 1
A
Hose Barb Elbow 1/2
1
INDUC HOP Stainless Piping suit 40L
1
3
B
2
1
C
5
4
APPL DATE
1-3 MORANG CR
GOLDACRES
MITCHELL PARK 3352 PH: 03 53426399
FAX: 03 53426308
GA4903111-2
Rinse Nozzle Sub AssemblTyRITLinE:se nozzle sub assem 40L hopper
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS
DATE CREATED:
9/08/2012
DEBUR ALL EDGES
DRAWN:
ITEM NO. DATE EDITED: PART NUMBER
DESCRIPTDGIWOAG4N9NO0:3111-2
A4
1 L071A 20/02/2013
Matt
MATERIAL:
Induction hopper rinse nozzle (two parts)
DO NOT SCALE DRAWING
SCALE:1:4
SHEET 1 OF 1
2
510100
Valve, Drum & container rinsing nozzle, ARAG
3
510110
Nozzle, Drum & container rinsing, ARAG
4
HB050-90
Hose barb, Elbow, 90 degree, 1/2" male thread x 1/2" hose
5
GA4653590
Induction Hopper, Stainless Piping suit 40L
QTY. 1 1 1 1 1
Chapter 8 - Induction Hopper - 59
A
3
HB075-90
4
L057A
5
SL100-90
6
HB100-90
7
UV150FP
Elbow male 3/4"
1
Hopper jet tapered 7mm
1
Street Elbow 1" Poly
1
Hose barb 90 degree 1" Banjo
1
Ball Valve Banjo 1 1/2"
1
Hopper Bottom
B
7
1
6
5
4
C
2 3
D
REV NO
1
GA4903105
Hopper Bottom
ITEM NO. PART NUMBER
1
L056A
2 3 4 CHAN5GE 6
7
GA5018315 HB075-90 L057A SL100-90 HB100-90 2
UV150FP
DESCRIPTION
QTY.
Induction hopper bottom, 1 1/2" hose barb x 1 1/2" BSPT male x 1" BSPT female x 3/4" BSPT female.
1
Valve, Ball, 20mm male & female thread, Black Butterfly handle
1
Hose
barb, Elbow, 90
degree, 3/4" mUNaLEleSS tOhTrHeERaWdISxE S3PE/C4IF"IEhDo: se DIMENSIONS ARE IN MILLIMETERS
D1AT9E:/02/20131
Venturi, 9mm outlet, Suit inductionDhEoBUpRpAeLLrEDGES
DRAWN:
1
PART QUANTITY:
Street elbowA,P9P0L dDeAgTrEee, 1" male x 1" female, Banjo
A. McAndrew
MATERIAL:
1
Hose barb, Elbow, 90 degree, 1" male x 1" hose, Banjo
1
DO NOT SCALE DRAWING
Valve, Ball, 1 1/2" female thread inlet / outlet, Full port, Lever handle, Banjo
1
60 - Special Evolution MY13 Parts Manual - Rev 2
3
4
5
6
7
DESCRIPTION
QTY.
e-assembled 60L hopper frame suit EF
1
60L Induction Hopper -assembled 60L (rectangle) hopper tank
1
Washer 8mm HD
6
M8 Spring washer SS
6
M8x20 bolt
6
2
8 A
B
C
D
1
3 45
GA4904220
60L Induction Hopper
REV NO CHANGE
DATE ECN NO.
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399 FAX: 03 53426308
TITLE:
Hopper 60L Frame and Tank Prairie
3
ITEM NO. 1 2
PART NUMBER DESCRIPTION UNTOL. DIMENSIONS
OPEN DIM
± 0.20
ONE DEC. PL. ± 0.10
GA4903049-65-EF Frame, Pre assembled, Induction hopper, 60L, Suit EF TWO DEC. PL. ± 0.05
GA4903113 Induction hopper tank, 65L, Pre assembled ANGULAR
± 0°30'
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 31/08/2012
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Name
DATE EDITED:
MATERIAL:
20/02/2013
Matt
DO NOT SCALE DRAWING
DWG NO.
GA4904220
SCALE:1:8
3
GA5004883
Washer 8mm Flat ZP Heavy Duty
4
GA5004919
Washer 8mm Spring SS
5
GA5004085
Bolt M8 x 20 ZP GR8.8
QTY. A3 1
1 SHEET 1 OF 1
6
6
6
Chapter 8 - Induction Hopper - 61
ADV DV ADV 08 Adv
8.8
ed 8.8 per x2
GR8.8 2011 V old pper
Cap Short ated
duty
S 5 e m
QTY. 1 1 1 1 2 1 2 4
8 2
4
1 1 1 1
4
4 4 1 1 2 1 4 4 4 1 1
64 0L Hopper F5 rame
6
7
8
A
2 17 18
20 21 21 22 13 19
7998
14
15
27
11
4
B
1
23 24 25
C
16
10 9 11 11 9 8
7998
26 6 5
D
10 9 11 11 9
12 5
18 17 3
GA4903049-65-EF Hopper Frame 60L
ITEM NO. 1 2 3 4 5 6 7 8 9 10 11
4 12 13 14 15 16
PART NUMBER DESCRIPTION
QTY.
GA4653420 GA4653440
Induction Hopper chassis Mount (A2D3V)(24)(25) put fasteners and w1ashers Induction Hopper arm Upper ADaVside in a bag to be fitted to m1achine
GA4653445 GA4656855
Induction Hopper arm Lower ADV
01
Latch pin changed
Induction Hopper tank support 60L suit EF range
-
Roll pin added
1
21/11/12
1
-
16/09/10 -
GA5000559
Nut M12 Hex ZP
REV NO
CHANGE
D2ATE ECN NO.
GA5050330
SHCS M12 x 20 ZP GR12.9
GA5000855
Bolt M16 x 110 ZP GR8.8
GA5001029(s2e6c)oCnudtlNidpuottwoMnf1itt6oinNyloc ZP
TITLE:
1-31MORANG CR
GOLDACRES MITCHELL PARK 3352 PH2: 03 53426399 FAX: 03 53426308 4
GA5001009end of soWcaksehterh1e6amdmscFlraetwZP Heavy DPurtey-assembled 60L hopper frame suit E8F
GA50008U7N9LESS
OTHERWISBE oSPlEtCMIFIE1D6
x 180 ZP DATE CREATED: 19/07/2004
GR8.8
DWG NO.
GA45222DD9IEM4BUENRSAIOLLNESDAGREESMIN oMIuLLnIMtiEnTEgRSpDSlRacAWotNte: t ,StDowoeuble inductioGnAh4o9p0p3e0r49sp-6r5in-EgF
DATE EDITED:
MATERIAL:
GA500032M20a/70tt2/2013
Set Screw M12 x 45 ZP GR8.8
DO NOT SCALE DRAWING
SCALE:1:10
GA4699435
Handle, Induction Hopper Latch arm
2
4
A3
1
SHEET 3 OF 3
1
GA4653490
Induction Hopper latch ADV
1
GA5007329
Spring compression, 76.2mm x 25.4 x 3.15mm, gold
1
GA5007073
Spring,Tension, 38.2 OD x 284.3 long x 3.55mm
4
Continued over page
62 - Special Evolution MY13 Parts Manual - Rev 2
60L Hopper Frame
ITEM NO. PART NUMBER DESCRIPTION
QTY.
17 GA5003783
End cap, Insert, Black, Plastic, 50 x 50 mm
4
18 GA5012203
Grease nipple, Short, 1/4" UNF
4
19 GA5075130
Roll pin M8 x 30mm coated
1
20 GA5011139
Bolt M10 x 100 ZP GR4.6
1
21 GA5000117
Washer 10mm Flat SS Heavy Duty
2
22 GA5000141
Nut M10 Nyloc ZP
1
23 GA5000587
Washer 12mm Flat ZP Heavy Duty
4
24 GA5000575
Washer 12mm Spring SS
4
25 GA5000295
Set Screw M12 x 25 ZP GR8.8
4
26 GA5052905
Insert, suit 12mm Hole, Black, plastic
1
4
efault/
27
GA50485380
Pin, 11mm OD6 shaft, Spring Steel wire loo7p lock,Yellow zinc
81
QTY. 1
60L Hopper Tank
1
A
2
Upto Serial #200660
1
1
1
1
9
2
1
1
8
14
B
13 12 11
2
23
23 23
1
6
6
6
6
7
3 11 12 13
C
17 16 15
1
10
5
D
11 12 13
4
GA4903113
Hopper Tank 60L
Continued over page
REV NO
TITLE:
Chapter 8 - Induction Hopper - 63
CHANGE
DATE ECN NO.
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399 FAX: 03 53426308
60L Hopper Tank
ITEM NO. PART NUMBER
1
GA5070040
2
GA5070045
3
GA5006661
4
GA4903105
5
GA4657115
6
GA4903113-1
7
HB050-90
8
GA4903113-2
9
GA4903113-3
10 GA5007071
11 GA5051230
12 GA5003983
13 GA5003975
14 GA4522296
15 GA5004883
16 GA5004919
17 GA5004085
18 GA5016473
DESCRIPTION Tank, Induction Hopper, 60L with 1 1/2" BSPT thread,Tank & lid Hopper lid - 07 Advance 65L Hinge, Butt, 70 long x 50 wide x 1.5mm, SS Valve assembly, Induction hopper bottom, Suit 40, 60, 70L hopper Anti vortex cross, Suit induction hopper bottom Drum Rinse Hopper Assembly Hose barb, Elbow, 90 degree, 1/2" male thread x 1/2" hose Hopper Rinse assembly Water inlet Hopper assembly Latch, Adjustable, Induction Hopper Lid CSCS M5 x 16 Countersink SS A2-70 Washer 5mm Flat SS Nut M5 Nyloc SS Level indicator, 60L induction hopper Washer 8mm Flat ZP Heavy Duty Washer 8mm Spring SS Bolt M8 x 20 ZP GR8.8 Tape PM foam 6.4 x 18mm L/Density
QTY. 1 1 2 1 1 1 1 1 1 2 23 23 23 1 6 6 6
64 - Special Evolution MY13 Parts Manual - Rev 2
1
2
3
60L Hopper Tank with Flange
A
From Serial #200661
14 15 16
17
2 B
4
19 18
16 24 25 22
21
15
4
20
6
C
9
3
E
23
17
87 13
D
1
F 6
5
11
E
10
12
5
6
ITEM NO. PART NUMB
1 GA5071208
2 GA5070045 3 GA5006661 4 HB050-075-9 5 GA5007071 6 GA5051230 7 GA5003983 8 GA5003975 9 GA4522296 10 FC220 11 200G 12 GA4906645 13 GA5016473 14 HB050-90 15 GA5020615 16 SL050-90 17 TF050 18 B55270-34-18 19 RN075050 20 HB050 21 EL050-90 22 510110 23 T12T 24 NIP-050-SH 25 510100
Hopper Tank - GA4906520
ITEM NO. PART NUMBER
F
1
GA5071208
2
REV NO
13
4
GA5070045 GACH5A0N0G6E661 2
HB050-075-90
5
GA5007071
6
GA5051230
7
GA5003983
8
GA5003975
9
GA4522296
10
FC220
DESCRIPTION
QTY.
Tank, Induction Hopper, 60L UNLESS with Flange OTHERWISE SPECIFIED to suit DIMENSIONS ABRaE njoUNT2OL2. D0IMVENaSlIOvNeS
IN MILLIMETRES
OPEN DIM
± 1.00
Hopper lid - 07 Advance 65L THIS DRAWING REMAINS THE PROPERTY
HingNeA, MBuE/tDt,A7TE0
lEoCnNg3NxO.50
OF GOLDACRES TRADING PTY LTD AND IS
wide x 1.5mm, SUBJECT OF COPYRIGHT SS 4
ANGULAR
± 0.50°
UNLESS OTHERWISE
TOLERANCED
DEBUR ALL EDGES
Hose barb, Elbow, 90 degree, 1/2" male thread x 3/4" hose
1 Material:
1 Surface Finish: 2 DRG. STANDARD
/PRACTICE AS 1100
1
Latch, Adjustable, Induction Hopper Lid
2
CSCS M5 x 16 Countersink SS A2-70
23
Washer 5mm Flat SS
23
Nut M5 Nyloc SS
23
Level indicator, 60L induction hopper
1
2" Full Port Worm Screw Clamp
1 Continued over page
Drawn By:
Luke
Drawing Checked
Approved
DATE EDITED:
David
Chapter 8 - Induction Hopper - 65
ITEM NO. PART NUMBER DESCRIPTION
11
200G
Seal, EPDM, Suit 2" flange fitting, Banjo
12
GA4906645
Pre-assembled 60L Hopper Bottom 2" Flanged
13
GA5016473
Tape PM foam 6.4 x 18mm L/Density
14
HB050-90
Hose barb, Elbow, 90 degree, 1/2" male thread x 1/2" hose,
15
GA5020615
Valve, Ball, 12mm male, female thread inlet, outlet, Butterfly handle, SS
16
SL050-90
Street elbow, 90 degree, 1/2" female thread x 1/2" male thread
17
TF050
1/2" Poly Tank Flange
18
B55270-3/4-18 Nozzle,Tank rinsing, 3/4" BSPT female inlet,Teejet
19
RN075050
Reducing nipple, 3/4" male thread x 1/2" male thread, Banjo
20
HB050
Hose barb, Straight, 1/2" male thread x 1/2" hose, Banjo
21
EL050-90
1/2" Poly Pipe Elbow 90 Degree
22
510110
Nozzle, Drum & container rinsing, ARAG
23
T12T
Tee,Threaded, 1/2" male x 1/2" hose
24
NIP050-SH
Nipple, Short, 1/2" male thread x 1/2" male thread, Banjo
DESCRIPTI2ON
2Q5 TY. 53 10100
Valv4e, Drum & container rin5 sing nozzle, ARAG 6
Hopper Bottom 2" Street Elbow 1" Poly
Hop11per Tank 60L Flange - Bottom
Elbow male 3/4"
1
e barb 90 degree 1" Banjo
1
Valve Male / Female TEE 3/4"
1
opper jet tapered 7mm
1
alve, 2" Full Port Flange
1
Full Port Worm Screw Clamp
1
al, EPDM, Suit 2" flange fitting, Banjo
1
4
A
7 8 9
5
B
3
2
6
C
1
QTY. 1 1 1 1
2
2 2 1 1 1 1 1 1 1 1
Hopper Bottom 2" Flanged - GA4906645
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1 2
GA4552240 SL100-90
Hopper Bottom Street elbow, 90
Vdeengtruerei , H1"omuGsainOleg LxwD1itA"h fC2em"RFaElalSen,1MPFgBA-He3ITXa:CM0:nMH30Oj3Eo5YRL35LA143PN244A62G36R93CK90R38352
1 1
TITLE:
3
HB075-90 Hose barb, Elbow, 90 degree, 3/4" male thread x 3/4" hose UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
DATE CREATED:
6/08/2013
Pre-assembled 60L Hopper Bottom 2" Flanged
1
E
2
4
APPL DATE
5
HB100-90 DEBUR ALL EDGES DATE EDITED:
GA5018315 16/09/2014 CoenTurner
Hose DRAWN:
Dave
barb,
Elbow,
90DWdGeNOg: ree, GA4906645
1"
male
x
1"
hose,
Banjo
A4
Valve, MATERIAL: Ball, 20mm male & female thread, Black Butterfly handle
DO NOT SCALE DRAWING
SCALE:1:4
SHEET 1 OF 1
1 1
6
L057A
Venturi, 9mm outlet, Suit induction hopper
1
7
MVS220CF
Ball valve, 2" Full port , 4 Bolt Flanged, short, Banjo
1
8
FC220
2" Full Port Worm Screw Clamp
1
9
200G
Seal, EPDM, Suit 2" flange fitting, Banjo
1
66 - Special Evolution MY13 Parts Manual - Rev 2
Chapter 9
FOAM MARKER TANK
NOTE: Details of the foam marker compressor can be found in the Right Hand Pod chapter
100 Litre Foam Marker Tank
ITEM NO. 1 2 3 4 5 6 7
PART NUMBER
DESCRIPTION
QTY.
GA5018487
Tank, 100L, Exacta foam marker, Purchased
1
HB050-90
Hose barb, Elbow, 90 degree, 1/2" male thread x 1/2" hose
3
GA5009157 GA5048310 GA5018309 EL1214 HB050-075
Cap, Suit Exacta foam tank, O-ring not included
1
Nipple, 1/2" thread x 1/2" thread, Brass
2
Valve, Ball, 12mm female thread inlet/outlet, Lever handle, SS 2
Hose barb, Elbow, 90 degree, 1/2" male thread x 1/4" hose
1
Hose barb, 1/2" male thread x 3/4" hose, Banjo
1
GA5009187
O-ring, 60 x 5.5mm, suits Exacta tank cap
1
Chapter 9 - Foam Marker Tank - 67
Foam Concentrate Bottle
ITEM NO. 1
PART NUMBER F70609A
DESCRIPTION
QTY.
Direct injection bottle mount plate 10mm FMS
1
2
GA4901038
Tank 25 litre round ball suit foam
1
3
F70622A
Direct inject bottle strap
1
4
GA5010085 Hollow section rectangular rubber
1
5
GA5004883 Washer 8mm Flat ZP Heavy Duty
2
6
GA5004749 Bolt M8 x 80 ZP GR8.8
1
7
GA5004917 Nut M8 Nyloc ZP
1
8
GA5009157 Cap, Suit Exacta foam tank, O-ring not included
1
9
GA5009187 O-ring, 60 x 5.5mm, suits Exacta tank cap
1
10
EL1214
Hose barb, Elbow, 90 degree, 1/2" male thread x 1/4" hose
1
11
GA4903077 Pre-assembly filter and ball valve for direct foam injection
1
12
HB050-90
Hose barb, Elbow, 90 degree, 1/2" male thread x 1/2" hose, Banjo
2
13
RB100050
Reducer bush, 1" male thread x 1/2" female thread, Banjo
1
68 - Special Evolution MY13 Parts Manual - Rev 2
Foam Generator
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
FGEN
Foam Generator nozzle sub assembly (3 parts nozzle & body & lock nut)
1
2
GA5066950
Barb elbow brass 1/4" x 1/8"
1
3
GA5002497
Washer, Flat, 3/4" x 1 1/8", Copper
1
4
GA4948390
Filter screen, circle, Suit foam generator, SS 316, 200 mesh
1
5
NIP100-SH
Nipple, Short, 1" male thread x 1" male thread, Banjo
1
6
GA5007621
Hose barb, Straight, 1" BSP female thread with grip tabs x 19mm
hose tail
1
Foam Generator Mounting
ITEM NO. 1 2 3 4 5
PART NUMBER FGEN-COM F70239A GA5004437 GA5004097 GA5048115
DESCRIPTION Foam marker, Foam generator assembly Bracket, Foam generator clamp Washer 6mm Flat SS Bolt M6 x 60 ZP GR8.8 Nut M6 Nyloc ZP
QTY.
1 2 4 2 2
Chapter 9 - Foam Marker Tank - 69
1
2
3
4
5
6
ITEM NO. PART NUMBER
DESCRIPTION
QTY.
1
GA5008491
Exacta Accumulator Bare
1
A
2
Elbow HB075-90
hose barb elbow 3/4" thread 3/4" barb
1
Foam Accumulator Assembly
B
2 1
C
ITEM
D
NO.
PART NUMBER
DESCRIPTION
1
GA5008491
Accumulator, Foam marker, Exacta, Green
QTY. 1
2
HB075-90
Hose barb, Elbow, 90 degree, 3/4" male thread x 3/4" hose
1
Filter
and
Ball
Valve
E
F
1
2
3
GA4903077 Complete Assembly
4
UNLESS OTHERWISE SPECIFIED
DATE CREATED:
3/03/2011
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DATE EDITED:
MATERIAL:
19/02/2013
Matt
DO NOT SCAL
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA5012259 Reducing nipple, 1/2" male thread x 1/4" male thread, Brass
1
2
GA5018323
Valve, Ball, 1/4" male / female thread inlet / outlet, SS, Lever
1
handle
3
CP1321
Nozzle body, Single, 1/4" NPT male inlet, Brass,Teejet
1
4
8079-PP-200
Filter screen, Nozzle tip, Orange 200 mesh, Polypropylene & SS, Teejet
1
5
CP4928
Adapter, Brass, 4908
1
6
CP1325
Nozzle cap, Brass, CP1325,Teejet
1
7
GA5066935
Nipple brass 1/8" x 1/8"
1
8
GA5018147
Check valve inline 1/8" NPT Female
1
9
GA5050210
Pneumatic fitting, Nipple, 1/8 BSPP male x 6mm push type
1
70 - Special Evolution MY13 Parts Manual - Rev 2
Foam M1arker Filt2er
A
7
3
1
4
2
B
3
4
5
C
6
5
6
ITEM NO.
PART NUMBER
1
AAB126ML-3-200
2
RB075025
3
GA5048305
4
GA5013809
5
GA5018147
6
GA5050210
7
HB075/050-90
D
E
REV
TITLE
Filt
ITEF M NO. PART NUMBER DESCRIPTION
DATE CREATED:
QTY. UNLESS OTHERWISE SPECIFIED 25/10/2012
DIMENSIONS ARE IN MILLIMETERS DRAWN: DEBUR ALL EDGES
DWG
GA
1
Filter, 3/4" female thread inlet / outlet, Orange 200 mesh
1AAB126ML-3-200 2
3
4
DATE EDITED:
1 8/11/2013
Matt
screen, Teejet
MATERIAL:
DO NOT SCALE DRAWING
S
2
RB075025
Reducing bush, 3/4" male thread x 1/4" female thread
1
3
GA5048305
Elbow, 90 degree, 1/4" BSP male x 1/4" BSP female, Brass
1
4
GA5013809
Reducing Nipple 1/4" x 1/8"
1
5
GA5018147
Check valve inline 1/8" NPT Female
1
6
GA5050210
Pneumatic fitting, Nipple, 1/8" BSPP male x 6mm push type
1
7
HB075/050-90
Hose barb, Elbow, 90 degree, 3/4" male thread x 1/2" hose, Banjo
1
Chapter 9 - Foam Marker Tank - 71
72 - Special Evolution MY13 Parts Manual - Rev 2
TRANSCAL
Chapter 10
4
5
6
QTY. Transcal Bottle
ATE 1
1
1
r
1
1
2
1
7665
1
2
x
1
1
2
1 1
9
2
2
2
2
1
1
t
1
11
1
7
8
A
8 3
19
10
B
21 18
9
13 12 12 14
17 16 15
C
17 16 15
4
1
D
20
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
F70608A
45l Transcal mount plate 10mm FMS
1
2
GA4901047
Tank, 45L, Natural, Suit Transcal
1
3 4
F70623A GA5010085
Transcal bottle Hollow section
srtercatpaYneglulolawrRErZV-uiNbnObcePrla1oCt/nH4esAdbigNahGrtbEtuubseedteaes
restrictor
1
15/02/13
DATE
ECN1NO.
5
GA5004731
Set Screw M8 x 50 ZP GR8.8
1-3 MORANG1CR
6
GA5003651
Washer 8mm Flat SS
GOLDACRES MITCHELL PARK 3352 PFAHX: 0: 30353543246223693908
7
GA5004917
Nut M8 Nyloc ZP
TITLE:
1
Pre-assembled transcal bottle suit Special and Prairie
8
GA4903050
Cap, Pre-assembled with rinse nozzle, Suit Transcal and DCI
1
9
HB1U0N0LE-S9S 0OTHERWISE
SPECHIFIEoDse
barb, Elbow, DATE CREATED:
19/05/2004
90
degrDeWeG,
1NO". male
x
1"
hose,
Banjo
10
T12T Tee,Threaded, 1/2" male x 1/2" hose DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Scott Stowe
DATE EDITED:
MATERIAL:
GA4903108
2
A3
1
8/11/2013
4
Coen
DO NOT SCALE DRAWING
SCALE:1:10
CSHEoETn1 tOiFn1ued over page
Chapter 10 - Transcal - 73
ITEM NO. 11 12 13 14 15 16 17 18 19 20 21
PART NUMBER HB050-90 GA5017673 GA5011239 GA5012461 GA5000577 GA5000575 GA5011227 HBT050-050 GA5020695 GA4903108-1 GA5020540
DESCRIPTION Hose barb, Elbow, 90 degree, 1/2" male thread x 1/2" hose Washer 1/2" High Tensile Bolt, M12 x 50, ZP GR 8.8 Nut M12 Nyloc ZP Washer 12mm Flat SS Heavy Duty Washer 12mm Spring SS Bolt M12 x 20 ZP GR8.8 Tee, Hose barb, 1/2", Banjo Hosetail (brass) 1/4" x 1/8" Male Thread Tap Assembly,Transcal Special Hose barb, Straight, 1/4" male thread x 1/4" hose, Brass
QTY. 1 2 1 1 2 2 2 1 1 1 1
Rinse Nozzle & Cap
GA4903050 Complete Assembly
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
L055A
Cap / Lid, 80 OD, 1/2" BSPP female thread in top, Suit Transcal
1
2
2502021
3
510110
4
GA5009187
5
006330
Long thread nipple 1/2"
1
Nozzle, Drum & container rinsing, ARAG
1
O-ring, 60 x 5.5mm, suits Exacta tan k cap
1
Hose barb, Brass, 13mm hose x flynutend, ARAG
1
74 - Special Evolution MY13 Parts Manual - Rev 2
3
4
5
DESCRIPTION
QTY.
arb 90 degree 1" Banjo
1
ttom load ball valve 1"
1
Adaptor MaTleraThnresacdal Bo1ttle Tap
6 A
B
1 2 3
C
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
HB100-90
Hose barb, Elbow, 90 degree, 1" male x 1" hose, Banjo
1
Valve, Ball, 3 way, 1" female thread inlet / outlet, Bottom port,
2
V100BL
1
Butterfly handle, Banjo
3
GOLDACRES
Enviro coupling & hose
100F
Cam lever, 1" male coupling x 1" male thread, Ban1j-o3 MORANG CR 1
MITCHELL PARK 3352 PH: 03 53426399 FAX: 03 53426308
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS DEBUR ALL EDGES
DATE
DATE EDITED:
8/11/2013
DATE CREATED:
27/11/2012
DRAWN:
C.Turner
MATERIAL:
TITLE:
Pre-assembled transcal bottle suit Special and Prairie Tap Sub Asm
DGWAG4N9O0: 3108-1
A4
Matt
DO NOT SCALE DRAWING
SCALE:1:3
SHEET 1 OF 1
ITEM NO. 1 2 3 4 5
PART NUMBER GA5018803 100E GA5001681 HOS25PVC HB100
DESCRIPTION Micromatic drum valve coupling, 3 pin,Viton seals Cam lever, 1" male coupling x 1" hose barb, Banjo Hose Clamp, 1" SS (20-32/12W) Hose, Suction, PVC, 25mm, Black (suit enviro chem probe) Hose barb, Straight, 1" male thread x 1" hose, Banjo
QTY. 1
1 2 1 1
Chapter 10 - Transcal - 75
76 - Special Evolution MY13 Parts Manual - Rev 2
MAIN TANK
Chapter 11
1 3000L Tan2 k Assembl3y
4
5
6
7
A
7
6 23
4
5
11
9
B
10
8 1
12
C
13
D
14
12
18
E
19
21
15
17
16
22
20
ITEM NO. PART NUMBER DESCRIPTION
1
GA5061115 Tank, 3000L EF, Bare, Suit Special
QTY. 1
REV NO CHA
G
TITLE:
2
GA4903098 Tank induction hopper inlet, Pre-assembled
1
F
UNLESS OTHERWISE SPECIFIED
DATE CREATED:
11/02/2010
DWG NO.
3
GA4903086
Venturi
filler,
Pre-assembled,
Mounted
in
top
of
tank
DIMENSIONS ARE IN MILLIMETERS DEBUR ALL EDGES
1 DRAWN:
Luke M
Tank with all
DATE EDITED:
MATERIAL:
1
4
GA42903136 Tank inlet3, 2" tank fill, Pre-assemb4led
9/10/2013 Matt
1
DO NOT SCALE DRAWING
SCALE:1:15
5
GA4901285-1 Tank flushing nozzle (elbow) cam adaptor
1
6
GA4901285-2 Tank rinsing nozzle, Assembly with tee cam adaptor
1
7
352040
Lid, With breather, Medium, Diameter 355
1
8
GA4672885 Bar,Tank lid opening support, Suit EF tanks
1 Continued over page
Chapter 11 - Main Tank - 77
3000L Tank Assembly
ITEM NO. PART NUMBER DESCRIPTION
9
GA5000557 Washer 12mm Flat ZP Large OD
10 GA5000559 Nut M12 Hex ZP
11 300120
Filter, Basket type, Diameter 305 x 245 deep, Suit main spray tank
12 HB050-90
Hose barb, Elbow, 90 degree, 1/2" male thread x 1/2" hose, Banjo
13 HOS12SIGHT Hose, Clear, 12mm, Sight tube
14 GA4903096 Super mix agitator, Pre-assembled
15 HB050/075-90 Hose barb, Elbow, 90 degree, 1/2" male thread x 3/4" hose, Banjo
16 GA4903097 Pre-assembled sump drain suit 5000L & 6500L Trailing
17 HOS20P
Hose, Pressure, 20mm, Black 250psi
18
HB150-200
Hose barb, Straight, 1 1/2" male thread x 2" hose, Banjo
19 HOS51S
Hose, Suction, 51mm,Wire reinforced
20 HB200-90
Hose barb, Elbow, 90 degree, 2" male thread x 2" hose, Banjo
21 HB200
Hose barb, Straight, 2" male thread x 2" hose, Banjo
22 V200
2" FPT x 1 1/2" port poly valve
1 4/5000L2 Tank 3
4
5
6
QTY. 4 4 1 2 1 1 1 1 1 1 1 1 1 1
7
A
21
3
4
6
7
22
2
5
24
25
B
1
23
C
18
12
20
D
19
12
E
18
13
16 11
14
10
15
9
8 27 26 17
F
78 - S1 pecial Evolution MY2 13 Parts Manual - R3 ev 2
4
REV NO CHANGE
GOLDACRE
TITLE:
Continued over page
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 8/10/2013
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Name
DATE EDITED:
MATERIAL:
8/10/2013
Matt
DO NOT SCALE DRAWING
DWG NO.
5000L special tank assembly, MY
SCALE:1:15
4/5000L Tank
ITEM NO.
1
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
PART NUMBER GA5070030 GA5070200 GA4901285-2 GA4902146 GA4903086 GA4903098 GA4903136 GA4901285-1 VSFMT300 300D HB300-90 HB200 PLUG100 HB100-90 HB050/075-90 HOS20P GA4903097 GA4903550 HB050-90 HOS12SIGHT GA4903096 352040 300120 GA4672885 GA5000581 GA5000557 GA5002601 GA5017623
DESCRIPTION Tank, 5000L, Prairie Advance EF, Bare Tank, 4000L, Prairie Advance EF, Bare Tank rinsing nozzle, Assembly with tee cam adaptor Dry sight tube, Base Bom, Priairie and Special, MY14 Venturi filler, Pre-assembled, Mounted in top of tank Tank induction hopper inlet, Pre-assembled Tank inlet, 2" tank fill, Pre-assembled Tank flushing nozzle (elbow) cam adaptor 3" NPT male x 3" male adaptor, long handle Cam lever, 3" female coupling x 3" NSPT female thread Hose barb, Elbow, 90 degree, 3" male thread x 3" hose, Banjo Hose barb, Straight, 2" male thread x 2" hose, Banjo Plug, 1" male thread, Banjo Hose barb, Elbow, 90 degree, 1" male x 1" hose, Banjo Hose barb, Elbow, 90 degree, 1/2" male thread x 3/4" hose, Banjo Hose, Pressure, 20mm, Black 250psi Pre-assembled sump drain, suit 5000L & 6500L Trailing Remote tank drain handle Hose barb, Elbow, 90 degree, 1/2" male thread x 1/2" hose, Banjo Hose, Clear, 12mm, Sight tube Super mix agitator, Pre-assembled Lid, With breather, Medium, Diameter 355 Filter, Basket type, Diameter 305 x 245 deep, Suit main spray tank Bar,Tank lid opening support, Suit EF tanks Nut M12 Hex SS Washer 12mm Flat ZP Large OD Bolt 3/8"UNC x 1" ZP Yellow GR8 Washer 3/8" Flat ZP Heavy Duty
QTY. 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 2 1 1 1 1 1 4 4 1 1
Chapter 11 - Main Tank - 79
1
2
3
4
5
ITEM NO. PART NUMBER
1
GA5018309
2
HB050/075-90
A
3
F70565A
Sump
Drain Valve 4
GA5001739
5
HB050-075
6
GA5002077
Upto Serial #200660 5
B
DESCRIPTION 12mm Ball valve 90' Poly Hose Barb Elbow 1/2 x
3/4 Sump drain mounting plate M20 Heavy Duty Flat Washer
1/2"Male Thd X 3/4" Hose barb 25mm Key Ring S/S
QTY. 1
1
1 2 1 1
4 6 3 4 1 2
C
GA4903097 Sump Drain Valve
ITEM NO. PART NUMBER DESCRIPTION
1
GA5018309
D
Valve, Ball, 12mm female thread inlet / outlet, Lever handle, SS
2
HB050/075-90
Hose barb, Elbow, 90 degree, 1/2" male thread x 3/4" hose, Banjo UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS
DATE CREATED:
15/02/2010
DEBUR ALL EDGES
DRAWN:
3
F7RE0V5N6O5A CHANGE Sump drain mountinAgPPpL lDaAtTeE
DATE EDITED:
3/12/2012
Luke M
MATERIAL:
4
GA50101739
Washer 220mm Flat Heavy Duty SSMatt
DO NOT SCALE DRAWING
5
HB0510-075
Hose barb2 , 1/2" male thread x 3/43 " hose, Banjo
6
GITEAM510N0O20. 7G7PAAR5T01N8UK3Me0y9BrEinRg,
25mm,
SS
DESCRIPTION 12mm Ball valve
2 GA5001741
M20 Heavy Duty Flat Washer
Sump Drain Valve A
3 4
GA4504980
Sump Drain Mounting Plate Bent
HB050/075-90 90' Poly Hose Barb Elbow 1/2 x 3/4
5 HB050-075
1/2"Male Thd X 3/4" Hose barb
4
QTY. 1 2 1 1 1
From Serial #200661
5
3 2 2 1
B
4
QTYG. OLDACRES
1-3 MO MITCH PH: 03
1
TITLE:
FAX: 0
1 Pre-assembled sump drain all models
1 DWG NO:
GA4903097
2 SCALE:1:2
SHEET 1 OF 1
1
5
1
C
GA4905600 Sump Drain Valve
ITEM NO. PART NUMBER
1
GA5018309
2 D GA5001741
3
GA4504980
4
HREBV0N5O0/07C5H-A9N0GE
5
HB0510-075
DESCRIPTION
Valve, Ball, 12mm female thread inlet / outlet, Lever handle, SS
Washer 20mm Flat SS Heavy Duty
Mounting Plate Bent Sump Drain UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS
DATE CREATED:
15/02/2010
DEBUR ALL EDGES
DRAWN:
Hose
barb,
Elbow,
90AdPPeL gDrAeTEe,
1/2"
male thread DATE EDITED:
22/04/2015
x
3/C4o"enhose, MATERIAL:
Banjo
Hose barb2, 1/2" male thread x 3/4"Dhaovidse, Banjo DO NOT SCALE DRAWING
QTY.
1-
1
GOLDACRES
M PH
2
FA
TITLE:
1 Pre-assembled sump drain all models MY
1 DWG NO:
GA4905600
1 SCALE:1:2
SHEET 1 O
80 - Special Evolution MY13 Parts Manual - Rev 2
Tank Rinse Tee
GA4901285-2 Tank Rinse Tee
ITEM NO. PART NUMBER DESCRIPTION
1
3
DESCRIPTION
2
ank rinse adaptor with cam
lock
3
3/4" X ose barb
6" Poly elbow
3N/i4p"ptlheread4
3/4" barb Tank rinse nozzle 3/4 BSP
5
emale Coupler 3/4 female
Thread
75D 4
QTY.GA4572015 1 T34T 1 NIP075-6
1
1 B55270-3/4-18
1
Cam lever, 3/4" female coupling x 3/4" hose barb, Banjo
5
6
7
8
Tank rinse adaptor with cam lock
Hose barb,Tee, 3/4" hose barb x 3/4" hose barb x 3/4" male thread
Nipple, 6" long, 3/4" male thread, Banjo
Nozzle,Tank rinsing, 3/4" BSPT female inlet,Teejet
Tank Rinse Elbow
QTY.
1
1
1
A
1
1
B
4
1 5
2
C
3
D
ITEM NO. 1 2 3 4 5
PART NUMBER GA4572015 NIP075-6 HB075-90 B55270-3/4-18 75D
3
4
GA4901285-1 Tank Rinse Elbow
DESCRIPTION
QTY.
Tank rinse adaptor with cam lock
1
Nipple, 6" long, 3/4" male thread, BanRjoEV NO CHANGE
DATE
1ECN NO.
1-3 MORANG CR
Hose
barb,
Elbow,
90
degree,
3/4"
male
GOLDACRES thread
x
3/4"
hose,
Banjo 1 MITCHELL PARK 3352 PH: 03 53426399
FAX: 03 53426308
Nozzle,Tank rinsing, 3/4" BSPT femaleTITLiEn: let,Teejet
1
Tank flushing nozzle (elbow) cam adaptor
Cam lever, 3/4" female coupling x 3/4" hose barb, Banjo
1
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 11/02/2010
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DATE EDITED:
MATERIAL:
9/10/2013
Coen
DO NOT SCALE DRAWING
DWG NO.
GA4901285-1
SCALE:1:2
A3
Chapter SHEET 1 OF 1 11 - Main Tank - 81
Supermix Agitator
Please note: Agitator fitted with 3mm jet
GA4903096 Supermix Agitator
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
502054
Agitator, Super mix, 3mm jet, Arag
1
2
HB075-100
Hose barb, Straight, 3/4" male thread x 1" hose barb, Banjo
1
3
GA5012375
Nut brass & tail 1/2"
1
4
PLUG050
Plug, 1/2" male thread, Banjo
1
006100
Seal, Rubber, 11.8 ID x 18 OD x 2mm
1
82 - Special Evolution MY13 Parts Manual - Rev 2
Venturi Filler
Note: Not all parts supplied with kit 500232 are used in this assembly GA4903086 Pre-assembled venturi filler
ITEM NO. PART NUMBER
1
500232
DESCRIPTION Venturi,Top of tank, 32 OD outlet, Arag
QTY.
1
2
106625
Hose barb, Straight, 1 1/2" fly nut end x 1" hose barb, Udor
1
3
MACH0022
4
HBF075
Jet for Arag venturi
Hose barb, Straight, 3/4" female x 3/4" hose, Banjo
1 1
5
RB075050
Reducing bush,3/4" male thread x 1/2"femalethread, Banjo
1
6
GA5050205
Hose Lay flat 32mm Blue
1
7
G10061
O-ring, 30 x 3mm
1
GA5007235
Cobra Clamp 36.0/91.4310 (Not Shown)
1
Chapter 11 - Main Tank - 83
Hopper Tank Inlet
GA4903098 Hopper Tank Inlet
ITEM NO. PART NUMBER DESCRIPTION
1
L026A
Barb to suit tank fill top
2
SE200
Elbow 2" street, 2" male to 2" female
3
HB200-150 Hose barb, Straight, 2" male thread x 1 1/2" hose, Banjo
4
GA5000527 Screw, Pan head, 12G x 25mm, SS
5
HOS50PVC Hose, PVC, 50mm, Black
GA5003325 Hose clamp, 2" SS, (40-60/12W) (not shown)
2" Tank Fill
QTY. 1 1 1 4 1
2
GA4903136 2"Tank Fill Assembly
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
2
3
4
L026A SE200
Barb to suit tank fill top
Elbow2"street,2"male to 2" female
HB200
Hose
barb,
Straight,
2" male
thread
x
2"
hose,
Banjo
GA5000527 Screw, Pan head, 12Gx25mm, SS
1
1
1
4
5
HOS50PVC
Hose, PVC, 50mm, Black
1
GA5003325
Hose clamp, 2" SS, (40-60/12W) (not shown)
2
84 - Special Evolution MY13 Parts Manual - Rev 2
Remote Tan k Drain 4/5000L
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA4653657 Sump ball valve inter drive shaft EF
1
2
GA4653656 Drive flange to suit Sump ball valve EF
1
3
GA4653658 Sump ball valve drive shaft EF
1
4
GA5004883 Washer 8mm Flat ZP Heavy Duty
16
5
GA5004917 Nut M8 Nyloc ZP
7
6
GA5065455 Bolt M10 x 30 ZP GR8.8
2
7
GA5000141 Nut M10 Nyloc ZP
2
8
GA5000117 Washer 10mm Flat SS Heavy Duty
4
9
GA4513440
Plate, uni rod aligning & sump hosehanger
1
10
F70661A
11
F70662A
Uni rod hanger plate Uni rod clamping plate 5mm FMS
1 1
12
GA5004711 Bolt M8 x 25 ZP GR8.8
8
13
GA5004919 Washer 8mm Spring SS
3
14
GA5003645 Washer,
5/16" ID
x
1
1/4"
OD, FlatSS
15
GA5001893W asher1"x 17/8" x 14G
16
GA5011465
Bolt M8 x 16 ZP GR8.8
1
1
2
Chapter 11 - Main Tank - 85
Dry Sight Tube Kit
2
3
4
DESCRIPTION
QTY.
9x19x1.6 SS RHS cut 2150mm
1
Dry sight tube tank float
1
Dry Sight Tube Fasteners & Fittings - Suit Prairie
1
EF sight tube 38x44x2000mm clear polycarbonate tube
1
Sight Tube Locating Plate
1
Sight Tube Locating Cap Assembly
1
9 x 19 Square tube Insert Black 1
M8 x 35mm BHCS SS
1
Nut M8 Nyloc S/S 316
1
Washer 8mm SS HD
2
Cable - Sight Tube Float
1
Pre-assembled dry sight tube base
1
crew 10G x 5/8 Pan Head SS
2
5
7 13 6
11
1
12
6
5 4
7
3
8 A
B
C
D
13 2
9
10 8
REV NO CHANGE
DATE ECN NO.
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399 FAX: 03 53426308
TITLE:
Dry sight tube tank float and guide kit suit Evo no light
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 22/10/2004
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke
DWG NO.
GA4902146
A3
DATE EDITED:
MATERIAL:
9/10/2013
2
3 ITEM NO. PART4NUMBER DESDCavRid IPTION
DO NOT SCALE DRAWING
SCALE:1:7.5
SHEET 1 OF 1
QTY.
1
GA5046955
RHS, 19 x 19 x 1.6mm, SS
1
2
GA4922090
Float assembly, In tank, Suit Dry sight tube
1
3
GA4903094
Pre-assembled Sight Tube parts Prairie Advance
1
4
GA5002979
Sight tube, Clear, 38 ID x 44 OD x 2000mm long, Polycarbonate
1
5
F70668A
Sight tube locating plate
1
6
GA4902148
Locating cap assembly, Dry sight tube
1
7
GA5001101
19 x 19mm Square tube Insert Black
1
8
GA5051370
BHCS M8 x 35 SS GR8.8
1
9
GA5052590
Nut M8 Nyloc SS
1
10 GA5003643 Washer 8mm Flat SS Heavy Duty
2
11 GA4902149 Cable, Sight Tube Float
1
12 GA4932020-02 Pre-assembled dry sight tube base
1
13 GA5014817 Screw 10G x 5/8" Pan Head SS
2
86 - Special Evolution MY13 Parts Manual - Rev 2
ITEM NO.
PART NUMBER
1
MACH0308
2
GA5015221
3
GA5014817
4
GA5004437
Dry Sight Tube Locating Cap
3
2
1 4
DESCRIPTION FLOAT TUBE LOCATING CAP
Sight tube cable roller Screw 10G x 5/8 Pan Head SS Screw 12G x 1 XR STS Pan SS
QTY.
1
1
A
2
6
B
C
ITEM NO. PART NUMBER DESCRIPTION
1
MACH0308
Float tube locating cap (Blk Poly)
2
GA5015221
Pulley, Upright, 19mm, Suit sight tube cable roller
3
3
GA54 014817
Screw 10G x 5/8" Pan Head SS 5
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETER6S
DATE CREATED:
29/05/2012
DEBUR ALL EDGES
DRAWN:
7
DESCRIPTION
EVDrNy sOight tube floCatHmAouNntGbEracket
4
GA5004437 Washer 6mm Flat SS QTY. 1
APPL DATE
DATE EDITED:
UNTOL. DIMENSIONS Name
10/10/2013 OPEN DIM
± 0.20 MATERIAL:
6" ball float
1
Washer 8mm HD M8 Spring washer SS
1
Coen
Dry S11 i2ght Tube Float
ONE DEC. PL. ± 0.10
TWO DEC. PL. ± 0.05
ANGULAR
± 0°30' DO NOT SCALE DRAWING
5-16 whitworth x 3-4" SS set screw
1
GOLDACRES QTY.
1
1-3 MORANG CR MITCHELL PARK 3352 PH: 03 53426399 FAX: 03 53426308
1 TITLE:
Sight Tube Locating Cap Assembly
8
2
DWG NO:
GA4902148
6
A4
SCALE:1:2.5
A SHEET 2 OF 2
B
2
C
345
1
D
ITEM NO. PART NUMBER
1
GA4523045
2
GA5008835
3
GA5003643
4
GA5004919
5
GA5048485
DESCRIPTION
QTY.
Mount bracket to suit dry sight tube float
1
Float, Black, Plastic, 6" OD
1
Washer 8mm Flat SS Heavy Duty
1
Washer 8mm Spring SS
1
Set Screw, 5/16" BSW x 3/4", SS GR8REV NO
CHANGE
1 DATE ECN NO. 1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399
FAX: 03 53426308
TITLE:
Dry sight tube tank float
Chapter 11 - Main Tank - 87
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 6/11/2009
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DWG NO.
GA4922090
A3
DATE EDITED:
MATERIAL:
10/10/2013
3
4
Coen
DO NOT SCALE DRAWING
SCALE:1:2
SHEET 2 OF 2
2
MACH0316
A
3
GA5004447
4
GA5004041
5
GA5004437
Tube End Cap with Light Attachment
1
M6 Spring washer SS
2
M6x12 bolt
2
M6 SS Washer
2
Dry Sight Tube Base
B
4 3 5
C
1
2
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
F70669A
Sight tube base mounting plate
1
2
MACH0316
Tube End Cap with Light Attachment
3
GA5004447
Washer, 6mm, Spring, SS
1
2
GO
D 41
GA5004041
Bo2lt M6 x 16 ZP GR8.8
3
4
2
TITLE:
5
5
GA5004437
Washer 6mm Flat SS
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS
DATE CREATED:
4/04/2013
2
Pre-assembled IdTrEy
A
Tank Stops REV NO
CHANGE
1
APPL DATE
DEBUR ALL EDGES
DATE EDITED:
10/10/2013
DRAWN:
Name
MATERIAL:
DWG NO:
GA4932020-02
2
Matt
DO NOT SCALE DRAWING
SCALE:1:2
3
B
4
2
4
5
1
C
ITEM NO. PART NUMBER DESCRIPTION
1
GA4522510 Front tank stop Left Hand Side
2
GA4522515 Front tank stop Right Hand Side
3
GA5011239 Bolt, M12 x 50, ZP GR 8.8
D
4
GA5000557 Washer 12mm Flat ZP Large OD
5
GA5012461 Nut M12 Nyloc ZP
88 - Special Evolution MY13 Parts Manual - Rev 2
QTY. 1 1 4 8 4
1
2
3
4
Tank Straps & Brackets
5 4 3 1 3 2
5
6
ITEM NO.
PART NUMBER
1
F70127A
2
GA5011239
3
GA5000557
4
GA5012461
5
GA5003859
5 Wa
50
ITEM NO. PART NUMBER
1
F70127A
2
GA5011239
3
GA5000557
4
GA5012461
5
GA5003859
DESCRIPTION Bracket,Tank strap, 50mm Bolt, M12 x 50, ZP GR 8.8 Washer 12mm Flat ZP Large OD Nut M12 Nyloc ZP Strap,Tank, 50mm, Goldacres branded, (price is per meter)
QTY. 1 1 2 1 1
REV NO
TITLE:
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 15/02/2010
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DWG NO.
Tank_Str
DATE EDITED:
MATERIAL:
11/10/2013
1
2
3
4
Matt
DO NOT SCALE DRAWING
SCALE:1:7.5
Chapter 11 - Main Tank - 89
90 - Special Evolution MY13 Parts Manual - Rev 2
Chapter 12 WHEELS, AXLES & mUDGUARDS
Axle Suit 3000L
ITEM NO. 1 2
3
4 5 6 7 8 9 10
PART NUMBER GA4657800 GA4657845 GA4657820 GA4657815 GA4657825 GA4632050 GA5000933 GA5001043 GA5001029 GA5006149 GA5012439 GA5017659
DESCRIPTION 3000L EF Chassis to suit Paralift Fixed Axle Carrier to suit 3000L 1.6m Axle to suit 3000L Axle, 1.8m, 8 stud, to suit 3000L (Standard Fitment) 2.0m Axle to suit 3000L Suspension narrow retainer (32mm FMS) Set Screw M16 x 50 ZP GR8.8 Washer 16mm Flat SS HD Nut M16 Nyloc ZP Bolt 1" UNC x 4 1/2" ZP GR8 Nut, Nyloc, 1" UNC, ZP Washer, 1", Flat, ZP, Heavy duty (5mm thick)
QTY. 1 2 1 1 1 2 12 24 12 8 8 16
Chapter 12 - Wheels, Axles & Mudguards - 91
Rigid Axle
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA4652986
Axle carrier suit EF chassis
2
GA4656921
2
GA4656926 GA4656931
GA4656936
3
GA4632050
4
GA5017659
Axle EF Rigid 2000mm 10 Stud
Axle EF Rigid 2050mm 10 Stud Axle EF Rigid 2100mm 10 Stud
1
Axle EF Rigid 3000mm 10 Stud (with stiffener plates)
Suspension narrow retainer (32mm FMS)
2
Washer, 1", Flat, ZP, Heavy duty (5mm thick)
16
5
GA5012439
Nut, Nyloc, 1" UNC, ZP
8
6
GA5006031
Bolt, 1"UNC x 5" ZP GR8
8
7
GA5001009
Washer 16mm Flat ZP Heavy Duty
32
8 GA5000931
Bolt M16 x 50 ZP GR8.8
16
9
GA5001029
Nut M16 Nyloc ZP
16
10 GA5075080
Hex nut protection cap suit M16, Black
16
92 - Special Evolution MY13 Parts Manual - Rev 2
5/6500L 10 stud V EF
stud
hers ncludes sher P ner
Duty t Duty S/steel 14mm 14mm GR2 grp 2
0mm w
) ed
M16 black t plate
4 Air Bag Axl5e 4/5/6500lt 6
7
8
QTY.
1
1
7885
10
A
2
2
2
26
22 21 20 28
2
24
2
35 36 1 23
27
28
25
13
4
11
1
34
30
1
34
6
B
13
4
37
6
18
2
16
19
8
38
8
8
4
16 15 15 17
8
C
4
4
4
32 3
29 12 11 11 13
4
31
2
Bolt supplied with bush
2 2
2
GA5066455
2
5
D
2
4 1
33
1
14
2
56 28 ITEM NO. PART NUMBER DESCRIPTION
QTY.
28
1
GA4652810 Axle airbag frame EF 1.8m to 3m
1
28
GA4656920 Axle EF Airbag 2000mm 10 Stud
2
GA4656925 Axle EF Airbag 2050mm 10 Stud
2
GA4656930
Axle EF Airbag 2100mm 10 SRtEuVdNO CHANGE
DATE
1
ECN NO.
3
GA4656935 GA5071010
GOLDACRES Axle EF Airbag 3000mm 10 stud (with stiffener plates)
Bi-functional Bush,Trailing Airbag Suspension Frame, Includes
1-3 MORANG CR MITCHELL PARK 3352 PH: 03 53426399
FAX: 03 523426308
Bolt, Nut and Sleeve
TITLE:
4
GA5015139 Shock Absorber, Double eye, 19mm eye, 82mm OD, Black
2
5
6
4
7
GA5004738 Bolt M8 x 70 ZP GR8.8 UNLESS OTHERWISE SPECIFIED
DATE CREATED:
9/10/2006
DWG NO.
DIMENSIONS ARE IN
GA50D0EB5U3R 1AL1L EDGES
MILLIMETERS DRAWN:
Air springLu,kHe MT230
single
air
sEtuvdo
2013
air
bag
assem
DATE EDITED:
MATERIAL:
GA501M20a/1t4t1/9201137
Nut M8 Nyloc ZP DO NOT SCALE DRAWING
SCALE:1:15
SHEET 1 OF 3
2
A3
2 2
8
GA5003643 Washer 8mm Flat SS Heavy Duty
4
9
GA5001045 Washer, 3/4", Flat ZP
1
10
GA5010868 Ride height valve, 1/4" connecting rods
1
11
GA5001739 Washer 20mm Flat Heavy Duty SS
13
12
GA5049490 Bolt 3/4" UNC x 4" ZP GR8
4
13
GA5048430 Nut, Nyloc, 3/4" UNC, ZP
6
Chapter 12 - Wheels, Axles & Mudguards - 93
Air Bag Axle
ITEM NO. 14 15
16
17
18 19 20 21 22 23 24 25 26 27
28
29 30
31
32
33
34 35 36 37 38
PART NUMBER GA4632050 GA5017659 GA5006031 GA5006151 GA5012439 GA5012445 GA5017673 GA5068715 GA5017623 GA5002599 RCS-14J RCD-14J RCD-2PT RCS-2PT GA5004447 GA5011405
S49-0404
GA5051366 GA5011425
S50-040404
GA5069335
GA5018323
GA5001009 GA5000931 GA5075080 GA5001029 GA4524630
DESCRIPTION Suspension narrow retainer (32mm FMS) Washer, 1", Flat, ZP, Heavy duty (5mm thick) Bolt, 1"UNC x 5" ZP GR8 (2050mm Axles) Bolt 1"UNF x 8" x12 TPI ZP GR8 (3000mm Axles) Nut, 1" UNC, Nyloc ZP (2050mm Axles) Nut, 1" UNF 14 tpi Nyloc ZP (3000mm Axles) Washer 1/2" High Tensile Bolt, 1/2"UNC x 1 1/2" GR8.8 ZP Washer 3/8" Flat ZP Heavy Duty Set screw, 3/8"UNC x 1 1/4", SS Single Clamp Jaws PP Gr3 14mm Double Clamp Jaws PP Gr 2 14mm Double Clamp Plate Top GR2 Single Clamp Top Plate grp 2 Washer, 6mm, Spring, SS Bolt M6 x 35 ZP GR8.8 Hydraulic coupling, Elbow, 90 degree, 1/4" BSPT male x 1/4" BSPT male End cap, 63.5 mm round, 1.25 - 2.0mm wall, black plastic SHCS M6 x 35 SS GR304 Hydraulic adaptor,Tee, 1/4" BSP male x 1/4" BSP male x 1/4" BSP male Plug, 1/4" BSPT male thread, Brass Valve, Ball, 1/4" male / female thread inlet / outlet, SS, Lever handle Washer 16mm Flat ZP Heavy Duty Bolt M16 x 50 ZP GR8.8 Hex nut protection cap suit M16, Black Nut M16 Nyloc ZP Plate Alignment Eccentric Air bag
Note: Rubber tee suit ride height levelling valve - GA5014651
QTY. 2 16
8
8
8 8 4 4 4 4 2 2 2 2
5
2 4
1
1
2
56 28 28 28 2
94 - Special Evolution MY13 Parts Manual - Rev 2
Mudguards Suit 3000L
ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12
PART NUMBER GA4657865 GA5003453 GA5020450 GA5011949 GA4502725 GA5000931 GA5001043 GA5001029 GA5065455 GA5006055 GA5002627 GA5011131
DESCRIPTION Mudguard Bracket to suit 3000L EF Mudguard 470W x R900 Bracket, Plastic, Black, Mudguard mounting, BK-P300BK1 Mudflap Goldacres green /gold 450 old style Stiffner for mudguard flaps Bolt M16 x 50 ZP GR8.8 Washer 16mm Flat SS HD Nut M16 Nyloc ZP Bolt M10 x 30 ZP GR8.8 Bolt M10 x 40 ZP GR8.8 Washer, 3/8" ID x 1 1/8" OD, High Tensile Nut M10 Dome nut Chrome
QTY. 2 2 8 2 2 8 16 8 4 6 20 10
Chapter 12 - Wheels, Axles & Mudguards - 95
4
QTY.
16
8 8
2
2
16
8
8
m
6
10
2
12
g
1
38" 1
5
6
Mudguards Suit 4/5000L
12
7
8
A
13
11 10
9
B
2 1
C
1 3
5 4 8667
38"P&ar4t 2N"uWmhITbeEeeMrlsN, SOt.eePriAnRgTaDNxeUlesMc(BnriEpoRttioshnoDwEnSC) RIPTIONQTY
GA4900591-EF1-S
GAF5u0ll0m10u4d3 guardWkitasher 16mm 1Flat SS HD
GA4655247 2 3
MGuAd5g00u0a9r3d9 brackeBtolat dMj16 x 60 6Black GR8.8
GA5001029
Nut M16 Nyloc ZP
GA5001029 4 MGudA5g0u1a19rd49500W xMRu1d0fl0a0p Goldac2res green /gold 450 old style
GA5003825 5
GA5000941 GA5001043
6
GA5075070 7
8
GAM501765x07600mm bBorlatcket, Mud g1ua8rd anti sail, Black
GA5M106012m65m6N5ywloacshNeuWrt asher, 3/8" ID1386x 1" OD, Flat SS
AntGi sAa5i0l 1m11u3d3guard bNruatcMk1e0t Dom2e nut SS
GA5006145
Bolt M10 x 30 SS A2-70
GA5011949 9
GGAo50ld0a39c2r5es mudfElnadpcap, 45 mm2round, Black plastic
QTY.
16
D
8
8
2
2
16
8
8
6
GA506616210 GA5011133
GMA15006x692756mm SS Mboudltguard Dun1lo2flex 510W x R1010 (R51.265) NGuAt5M0014026d3ome nuMtuSdSguard 630W 20 x R1000 REV NO CHANGE
DATE 2 ECN NO.
1-3 MORANG CR
11 GA5002665
12
GOLDACRES GA5066977
Mudguard Bracket Dunloflex suit 48.3mm pipe (H50.660)
Washer 3/8 x 1" flat SS
40
MITC1H2ELL PARK 3352
PH: 03 53426399
FAX: 013 53426308
ForGwAid5e00w6h1e45e1ls3
use
RefeMr 1to0txab3le0s SoSvebroplatge for 12x spacer GA4535575
mudgu8ard
bracket
pTIaTLrEt:
numbers
1
and change M16x60mm bolts to M16x90 (GA5011297)
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 2/03/2011
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DWG NO.
Evo 2013 mudguard assem
A3
DATE EDITED:
MATERIAL:
16/11/2012
4
Matt
DO NOT SCALE DRAWING
SCALE:1:25
SHEET 1 OF 1
96 - Special Evolution MY13 Parts Manual - Rev 2
Continued over page
Mudguards
32" Wheels, Air Bag Axle Part No GA4900591-EF-NS-32 GA4655078 GA4655079
38" Wheels, Air Bag Axle Part No GA4900591-EF-NS-38 GA4655078 GA4655079
Description Mudguards kit 32" to suit airbag suspension Mudguard bkt 38" RH EF rigid Mudguard bkt 38" LH EF rigid
Description Mudguards kit 38" to suit EF with airbag suspension Mudguard bkt 38" RH EF airbag Mudguard bkt 38" LH EF airbag
38" Wheels, Rigid Axle Part No GA4900591-P-EF-R GA4655082 GA4655083
42" Wheels, Air Bag Axle Part No GA4900591-EF-NS-42 GA4655076 GA4655077
42" Wheels, Rigid Axle Part No GA4900591-P-EF-R-42 GA4655088 GA4655089
Description Mudguards kit 38" to suit EF with rigid axle Mudguard bkt 38" RH EF non airbag Mudguard bkt 38" LH EF non airbag
Description Mudguards kit 42" to suit EF with airbag suspension Mudguard bkt 42" RH EF airbag Mudguard bkt 42" LH EF airbag
Description Mudguards kit 42" to suit EF with rigid axle Mudguard bkt 42" RH EF non airbag Mudguard bkt 42" LH EF non airbag
Chapter 12 - Wheels, Axles & Mudguards - 97
Wheel Speed Sensor
0630171152 Wheel speed sensor kit
ITEM NUMBER A B C D E F G H I
PART NUMBER 0630171149 0630159402 0630159403 0630159483 1070159472 3131000016 3121001031 3121001043 3131000028
DESCRIPTION
QTY.
Sensor,Wheel Drive Speed with 7 1/2' Cable, Raven
1
Magnet, Red North Pole Speed Sensor Assembly, Raven
2
Magnet, Black South Pole Speed Sensor Assembly, Raven
2
Sensor,Turret Assembly Speed Sensor, Raven
2
Rod, Speed Sensor, Raven
1
Washer 1/4" lock split zinc
2
Nut 1/4" - 20 hexZP
2
Nut 1/2" - 13 hex ZP
1/2" lock washer
4
ITEM
NUMBER PART NUMBER
DESCRIPTION
QTY.
1
0630171152
Sensor, Speed 4 Pole Wheel Drive with 7 1/2' Cable Kit,
1
Raven
2
GA4534520
Speed Sensor Tab Bolt On
1
3
GA5004883
Washer 8mm Flat ZP Heavy Duty
4
4
GA5004711
Bolt M8 x 25 ZP GR8.8
2
5
GA5004917
Nut M8 Nyloc ZP
2
6
GA5001009
Washer 16mm Flat ZP Heavy Duty
4
7
GA5000931
Bolt M16 x 50 ZP GR8.8
2
8
GA5001029
Nut M16 Nyloc ZP
2
9
GA5017615
Washer 1/2" Flat ZP Heavy Duty
4
98 - Special Evolution MY13 Parts Manual - Rev 2
fi
fl
fl
Wheels
2
Please note wheels are fitted as a left and right hand
pair. So when ordering complete wheel and tyre
unit, please note on the order which side is required.
Rims are supplied painted and with speed sensor
1
holes.
16.9 x 34 wheels Item 1 2
18.4 x 38 wheels
Item
1
fi fifl
2
20.8 x 42 wheels Item 1 2
24.5 x 32 wheels Item 1 2
20.8 x 42 wheels Item 1 2
20.8 x 42 wheels Item 1 2
Wheel Nuts Part number GA5018892 GA5018900
Part number GA5020685 GA5016337
Part number
fl
G flAfl 5018820
G A5001108
Description
Wheel DW15 x 34", 8 studs on 275 Zero Offset
Tyre 16.9 x 34 10PR tyre & tube
fi
fifi fl
fi fi fl fi
fi fi fl fi
Description
Wheel DW 15 x 38", 10fi Stud 0 offset
Tyre 18.4 x 38 (16 fl Ply )
Part number GA5020340 GA5020830
Description Wheel DW18 x 42", 10 Stud on 335 0 offset Tyre, 20.8 x 42 (16 Ply ) TLR
Part number GA5018814 GA5001837
Description Wheel DW 21 x 32", 10 Stud on 335 0 offset Tyre 24.5 x 32 (16 Ply)
Part number GA5020340 GA5020831
Description Wheel DW18 x 42", 10 Stud on 335 0 offset Tyre, 20.8 x 42 Radial 520/85
Part number GA5020340 GA5050381
Description Wheel DW18 x 42", 10 Stud on 335 0 offset Tyre 580 /70R x 42 Radial
Description Wheel nut, M22 x 1.5mm, ZP Tapered spring Washers suit M22 wheel stud (329F003)
Chapter 12 - Wheels, Axles & Mudguards - 99
Hub - 90 Series
Complete 90 Series Hubs/Stub Axles Available Part No GA5018119
4
TO DETERMINE SIZE/SERIES, MEASURE CROSS SECTION.
90mm
6
3 5
5
2 1
ITEM NO. 1 2 3 4 5 6
PART NUMBER GA5052120 GA5052190 GA5052165 GA5052205 GA5052200 GA5052195
DESCRIPTION Cap kit, Suit 90 series stub axle, ADR Crown Nut Kit 80/90 Series ADR Wheel nut kit, Suit 90 / 110 series stub axle, ADR Stud Wheel Kit t/s 90 Series ADR (set of 10) Bearing kit, Suit 90 Series stub axle 90 Series ADR Seal Kit
QTY. 1 1 1 1 1 1
100 - Special Evolution MY13 Parts Manual - Rev 2
Hub - 70 Series
4 5
70mm
1 2
2 3 6
ITEM NO. 1 2 3 4 5 6
PART NUMBER GA5066406 GA5052105 GA5052115 GA5018894 GA5018891 GA5052110
DESCRIPTION Seal, Heavy duty, Suit 70 series axle, ADR 70 Series ADR Bearing Kit 70 Series ADR Crown Nut Kit Wheel stud, Suit 60, 70 & 80 series axles Wheel nut, Suit 60, 70 & 80 series axles 70 Series ADR Cap kit
QTY. 1 1 1 1 1 1
Chapter 12 - Wheels, Axles & Mudguards - 101
102 - Special Evolution MY13 Parts Manual - Rev 2
boom centre
Chapter 13
Default/ QTY. 1
1
1
1 2 2 2 2 2 2 2 2 6 2
2
4 10 16 n 2
20 8 8 2 2
4
6 6 4 2 8 4 2 4 2 2
4
2
4
5
6
7
8
Delta Boom Centre Assembly
A
5
12
21 20 20 13
31 22 22 32
7
15 37
36 2
17 4
27 26 20 25 20
B
21
20
25
20
14
C
9
27
8
26
1 13 19
16
20 6
29 30
D
20 22 23 24 11 35
21
33 3
33
10
18
18 28
17
34
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA4658110 Delta centre 2012 18 to 24m
1
REV NO CHANGE
DATE ECN NO.
2
GA4658116 Delta centre tilt arm Left Hand 2012 18 to 24m
1 1-3 MORANG CR
3
GA4658115
GOLDACRES Delta centre tilt arm Right Hand 2012 18 to 24m
1
MITCHELL PARK 3352 PH: 03 53426399
4
GA4654122 Paralift rear suit 24m delta 2012
1 FAX: 03 53426308
TITLE:
5
GA4656240 Delta link, Long
18 to 24m Centre Section with Paralift R2ear and Tilt Arms 2012
Continued over page
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 20/10/2011
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Coen
DATE EDITED:
MATERIAL:
DWG NO.
GA4905670
A3
Chapter 13 - Boom Centre - 103
18/10/2013
4
Matt
DO NOT SCALE DRAWING
SCALE:1:20
SHEET 1 OF 1
Delta Boom Centre Assembly
ITEM NO.
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
36
37
PART NUMBER
GA5015899
GA4656245
GA5010793
GA5075150 GA4656195 GA4502515 GA5015143 GA5006149 GA5006033 GA4658375 GA5075190 GA5052590 GA5003643 GA5075215 GA5017659 GA5012439 GA5001009 GA5001029 GA5009637 GA4656260 GA5000557 GA5012461 GA5001223 L002A GA5011475 GA5069145 GA5000939 GA5000117 GA5000141 GA5006071
GA4572040
GA4572200
DESCRIPTION Shock absorber, Eye & pin, 16mm eye, Pin 70mm long M8, 45mm OD, Black Delta link, short, standard duty Spring, tension, 70 OD x 329 long x 12mm, large, suit delta boom yaw / cable Eye Bolt 12mm x 100mm Short Rose end, Bolt on, Suit 12 - 24m boom Pivot pin suit delta centre 2011 Shock absorber, Eye & Pin, Eye 15mm, Pin 73mm long M10 Bolt 1" UNC x 4 1/2" ZP GR8 Bolt 1" UNC x 6" ZP GR8 Mount, Boom cable spring, Suit 18 - 24 meter Delta boom, 2012 Wear plate Delta tilt arm suit 2012 centre Nut M8 Nyloc SS Washer 8mm Flat SS Heavy Duty Black PVC shocker cover clip on suit SC2914 Washer, 1", Flat, ZP, Heavy duty (5mm thick) Nut, Nyloc, 1" UNC, ZP Washer 16mm Flat ZP Heavy Duty Nut M16 Nyloc ZP Grease nipple, Elbow, 90 degree, 1/4" UNF male Adjuster bolt, Delta link hanger Washer 12mm Flat ZP Large OD Nut M12 Nyloc ZP Circlip, 19mm, E type, zinc plated Pin, 1" x 180mm, Double circlip groove Bolt M8 x 30 ZP GR8.8 Nut M16 x 1.5 pitch Nyloc ZP Bolt M16 x 60 Black GR8.8 Washer 10mm Flat SS Heavy Duty Nut M10 Nyloc ZP Bolt M10 x 40 ZP GR10.9 Pin, 1" diameter x 84mm long, Suits cylinder clevis end, Comes with circlips Pin, 1" diameter x 132.4mm long, With shoulder and circlip groove
QTY.
2
2
2
2 2 2 2 6 2 2 4 10 16 2 20 8 8 2 2 4 6 6 4 2 8 4 2 4 2 2
4
2
104 - Special Evolution MY13 Parts Manual - Rev 2
Del1ta Boom 2Paralift A3ssembly -4 3000L 5
6
7
A
14
9
8
B
1
10
7
11
12
3
C
13
3
6
8
D
15
16
14
11 5
10
8
2
9
14
E
REV NO CHANGE
4
GOLD
ITEM NO. PART NUMBER DESCRIPTION
QTY.
TITLE:
Paralift Special 3000
F
1
GA4657850
Top Short Paralift Arm
UNLESS OTHERWISE SPECIFIED
1 DATE CREATED:
5/10/2009
DWG NO.
2
GA4657855
Bottom Short Paralift Arm
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
DATE EDITED:
1 Coen
MATERIAL:
GA4903835
17/10/2013
1
2
Hydraulic
3
cylinder,
2.5"
bore,
2"
4
rod,
20"
stroke
disMpaltat cement
pin
DO NOT SCALE DRAWING
SCALE:1:15
3
GA5070075
2
eye
4
GA5050355
End cap, 76.1 mm round, suit 65 NB pipe, Black plastic
4
5
GA5066655
Pin with retaining plate, 28.575 OD x 180 long
6
6
GA5066645
Pin with retaining plate, 1" x 280mm long, Paralift chassis ram
2
7
GA5066675
Pin with retaining plate, Stepped, 294mm Long
2
8
MACH0152
Bush with shoulder, 12.3 ID x 25 OD x 21mm long
10
9
GA5066985
SHCS M10 x 40 ZP GR12.9
10
10
GA5000141
Nut M10 Nyloc ZP
10
11
MACH0134
Bush, Stepped, Paralift, 40mm OD, 38.5mm long
16
12
GA4572135
Spacer bush, 40 OD x 25.8 ID x 9mm thick, Paralift arm spacer
2
13
GA4562190
Spacer bush, 40 OD x 26 ID x 17.5mm long, Paralift arms
2
14
GA5067885
Pin cover, Black, clip on, plastic
10
15
GA4903058
Pre-assembled accumulator manifold
1
16
GA5007787
Accumulator, Hydraulic, 1L, precharged to 70 bar
2
Chapter 13 - Boom Centre - 105
am and arm
2
/8" x 1" long
16
assis Ram
2
it para lift pins
10
er bush
4
D 26ID 17.5 long d)
2
B
le 6mm
8
plastic 5NB Tube
D10elta Boom Paralift Assembly - 4/5000L 6
BSP- 3/4" UNO
2
aulic 1/2" FF
2
19 18 2
brako
10
nut Z/P
11
lator Manifold
1
recharge 70 Ba 2
m Hydraulic Hose 4
Heavy duty
8
c Nut
8
20 21 22 9 3
16 8 17
C
12
1
7
D
2 11 10 14 13 15
2564
REV NO CHANGE
DATE ECN NO.
ITEM NO. PART NUMBER
1
GA5070082
1-3 MORANG CR
DESCRIPTION
GOLDACRES QTY. MITCHELL PARK 3352 PH: 03 53426399
Hydraulic cylinder - 2.5" bore, 2" rod, 21" Stroke
2
FAX: 03 53426308
2
GA5066655
TITLE:
Pin with retaining plate, 28.575 OD x 180Pmarma llioftnSgpecial 4000L 5000L 20613
3
GA4659305
Top Paralift Arm MY12
1
4 5
GA4659310 GA5066675
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 21/01/2010
Bottom Paralift Arm MY12 DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Coen
Pin with retaining plate, Stepped, 294mm Long DATEEDITED:
MATERIAL:
DWG NO.
GA4903836
1 2
A3
16/10/2013
3
6 4 GA5065486
MatGt lacier bush 1 1/8" x 1" long DO NOT SCALE DRAWING
SCALE:1:20
16 SHEET 1 OF 1
7
GA5066645
Pin with retaining plate, 1" x 280mm long, Paralift chassis ram
2
8
MACH0152
Bush with shoulder, 12.3 ID x 25 OD x 21mm long
10
9
GA4572135
Spacer bush, 40 OD x 25.8 ID x 9mm thick, Paralift arm spacer
4
10
GA4562190
Spacer bush, 40 OD x 26 ID x 17.5mm long, Paralift arms
2
11
GA5050450
Grease nipple M6
8
12
GA5067885
Pin cover, Black, clip on, plastic
10
13
GA5050355
End cap, 76.1 mm round, suit 65 NB pipe, Black plastic
6
14
S89-0812
Hydraulic adaptor, 90' Elbow 1/2" BSP- 3/4" UNO
2
15
GA5000835
Valve, Ball, Hydraulic, 1/2" female thread inlet / outlet
2
16
GA5051470
SHCS M12 x 50 ZP GR12.9
10
17
GA5012461
Nut M12 Nyloc ZP
11
18
GA4903058
Pre-assembled accumulator manifold
1
19
GA5007787
Accumulator, Hydraulic, 1L, precharged to 70 bar
2
20
GA5070905
U bolt M10 x 118L x 115mm round top ZP
4
21
GA5000117
Washer 10mm Flat SS Heavy Duty
8
22
GA5000141
Nut M10 Nyloc ZP
8
106 - Special Evolution MY13 Parts Manual - Rev 2
GA4572110 S44-0808
Prairie Hyd fitting suit accumulator
1
-
2
Accumulator Manifold
4 3 1
5 2
ITEM NO. PART NUMBER
1
S167-080808
2
GA5001045
3
S83-3
4
GA4572110
5
GAS99-603
DESCRIPTION Hydraulic adapter,Tee, 1/2" male BSP x 1/2" male BSP x 1/2" female swivel Washer, 3/4", Flat ZP Hydraulic adapter,Tee, 1/2" female swivel x 1/2" male x 1/2" female swivel Hydraulic adaptor, Fitting to suit accumulator, 1/2" BSPT male x 1/2" BSPT female Hydraulic adaptor, Bulkhead nipple, 1/2" BSP male x 1/2" BSP male
QTY. 2 4 1
1
2
Chapter 13 - Boom Centre - 107
De3lta Centre - Ad4 justable Tilt L5inks
DESCRIPTION
QTY.
stable link with clevis ends 2
1" HD Washer ZP
16
1" Nyloc Nut UNC ZP
4
olt 1 x 4 1/2 UNC ZP GR8
4
6 A
B
1
1
C
3
2 4
APPL DATE
ITEM NO. PART NUMBER DESCRIPTION
1-3 MORANG CR QTY.
1
GA5075225
2
GA5017659
Adjustable
link
with
clevis
enGds O(noLtDraAchCet RramES)
MITCHELL PARK 3352 PH: 03 53426399
2
Washer, 1", Flat, ZP, Heavy duty (5mm thick) FAX: 03 53426308 16
3
GA5012439
Nut, 1" UNC, NyloT1IcTL8E:ZtoP24m Centre Section with Solid Links 2012
4 GA5006149 Bolt 1"UNC x 4 1/2" ZP GR8 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS
DATE CREATED:
6/07/2012
DEBUR ALL EDGES
DRAWN:
DWG NO:
DATE EDITED:
Coen
GA4905685
16/10/2013
MATERIAL:
4
4 A4
Matt
DO NOT SCALE DRAWING
SCALE:1:15
SHEET 1 OF 1
108 - Special Evolution MY13 Parts Manual - Rev 2
3
4
5
DESCRIPTION
QTY.
der 18 to 24m Centre ection ASM 2012
2
Delta Centre - Hydraulic Tilt
6 A
B
1
C
ITEM NO. PART NUMBER
1
GA4905675
DESCRIPTION Tilt Cylinder 18 to 24 Centre Section ASM 2012
QTY. 2
1
2
3
4
5
6
Delta Centre ITEM NO.
PART NUMBER
-
Hydraulic DESCRIPTION TQiTYl.t
Cylinder
1
GA4572040
A
2
GA5001223
Tilt Ram pin suit 3.5 inch cylinder C/W retainers
19mm E type circlip
GOLDACRES 2
1-3 MORANG CR MITCHELL PARK 3352
4
PH: 03 53426399 A
3
GA5065054
Cylinder tilt 2.5" x 5" stroke 1" 3/8 rod
suit 2012 Delta
TITLE:
1
FAX: 03 53426308
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS
DATE CREATED:
6/07/2012
18 to 24m Centre Section with Tilt Cylinders 2012 2
ATE
DEBUR ALL EDGES
DATE EDITED:
11/11/2013
B
Matt
DRAWN:
Coen
MATERIAL:
DO NOT SCALE DRAWING
DWG NO:
GA4905680
1
3
SCALE:1:20
SHEET 1 OF 1
A4
B
2
2
1
C
C
2
NOTE: Pins are supplied with the ram
D
REV NO 1
ITEM NO.
1
2
CHANGE
3
PART NUMBER
GA4572040
GA5001223 APPL DATE
GA2 5065054
1-3 MORANG CR
DESCRIPTION
GOLDACRES
MITCHELL PARK 3352
QTY. PH: 03 53426399
FAX: 03 53426308
Pin,
1"
diameter
x
84mm
long,
Suits
cylinder clevis end TITLE: Tilt Cylinder 18 to 24m Centre Section ASM 2012
2
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS
DATE CREATED:
6/07/2012
Circlip, 19mm, E type, zinc plated DEBUR ALL EDGES DATE EDITED:
DRAWN:
Coen
DWG NO:
GA4905675
A44
Cylin1M7ad/1tt0e/2r013tilt
2.5"
MATERIAL:
x 5"
stroke
1
3/8"
rod
suit
2012
Delta
1
DO NOT SCALE DRAWING
SCALE:1:10
SHEET 1 OF 1
Chapter 13 - Boom Centre - 109
1
MACH0029
2
L006A
3
GA5020320
4
GA5003643
5
GA5048655
6
GA5052590
eccentric bush for 18m centre section
1
Boom cable bolt
1
Cable Adjuster 20mm Threaded
1
Washer 8mm SS HD
3
M8x40 bolt
3
Nut M8 Nyloc S/S 316
3
9
GA5001709
10
GA5001043
11
GA5000939
12
GA5001029
13
GA5075230
14
GA5065020
7 GA5048125 Delta Boom M20 Nyloc nCut able A2djuster
8
GA5001741
M20 Heavy Duty Flat Washer
2
78
289
3
Nut M20 Coarse Zinc
1
M16 SS washer
2
M16x60 bolt
1
M16 Nyloc nut
1
Bow Shackle 13mm WLL 3.25T Black 1
Chain link 11mm
4
11
10 14
13
10 12 5 1
4
7
6
REV NO CHANGE
GOLDA
TITLE:
Right side shown. Left side is a mirrored version of the above.
UNLESS OTHERWISE SPECIFIED
DATE CREATED:
17/10/2013
DWG NO.
ITEM NO. PART NUMBER DESCRIPTION
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Name
QTY.boom cable adjuster - D
DATE EDITED:
MATERIAL:
1
21
MACH0029 3
Bush, Eccentric h4 ole, Suit 18 - 24m D1M8a/e1tt0lt/2a013centre section DO NOT SCALE DRAWING 1 SCALE:1:5
2
L006A
Bolt, M20, Anchor Pivot, Suit cable adjuster
1
3
GA5020320
Cable Adjuster, threaded, M20
1
4
GA5003643
Washer 8mm Flat SS Heavy Duty
3
5
GA5048655
Bolt M8 x 40 ZP GR8.8
3
6
GA5052590
Nut M8 Nyloc SS 316
3
7
GA5048125
Nut M20 Nyloc Coarse ZP
2
8
GA5001741
Washer 20mm Flat SS Heavy Duty
2
9
GA5001709
Nut M20 Coarse Hex ZP
1
10
GA5001043
Washer 16mm Flat SS HD
2
11
GA5000939
Bolt M16 x 60 Black GR8.8
1
12
GA5001029
Nut M16 Nyloc ZP
1
13
GA5075230
Bow Shackle 13mm WLL 3.25T Black
1
14
GA5065020
Chain 11mm Long link grade 100 rated 3 tonne
4
NOTE: All quantities shown above are for one side only.
110 - Special Evolution MY13 Parts Manual - Rev 2
NUMBER 129
290
643 080 117 455 141 161
DESCRIPTION
QTY.
Narva Boom Height Limit Switch 1
Prairie EF Boom Height adjustment bracket
1
Delta Boom Height Limit Switch Washer 8mm HD
2
M8 x 20mm Plastic Knob Bolt
2
Washer 10mm SS Heavy duty
4
Bolt Gr8.8 M10x30
2
M10 Nyloc Nut
2
Paralift switch bracket
1
7
5 2
5 6
8
1
34
Mounting bolts etc included with GA5012129
ITEM NO. 1 2 3 4 5 6 7 8
PART NUMBER GA5012129 GA4522290 GA5003643 GA5067080 GA5000117 GA5065455 GA5000141 GA4654161
DESCRIPTION Limit switch, Flexible arm, Micro, IP65, 10 Amp Prairie EF Boom Height adjustment bracket Washer 8mm Flat SS Heavy Duty Knob Bolt M8 x 20 Washer 10mm Flat SS Heavy Duty Bolt M10 x 30 ZP GR8.8 Nut M10 Nyloc ZP Bracket mount Paralift Switch
QTY. 1 1 2 2 4 2 2 1
Chapter 13 - Boom Centre - 111
1
2
3
4
A
Delta Centre Oversize Sign
B
5
ITEM NO.
6
PART NUMBER
1
GA4658150
2
GA5000577
3
GA5000307
4
GA5012461
5
GA5009613
6
GA5003645
7
GA5003643
8
GA5004711
9
GA5052590
C
4
D
2
8
6
7
9
3
2
1
5
E
ITEM NO. PART NUMBER DESCRIPTION
QTY.
REV
1
GA4658150
Bracket, Oversize sign mount arm, Bolt on, 2011 centre
2
2
GA5000577
3
GA5000311
Washer 12mm Flat SS Heavy Duty Set screw, M12 x 35, ZP GR 8.8
8
TITLE
4
F
4
GA5012461
Nut M12 Nyloc ZP
4 UNLESS OTHERWISE SPECIFIED
DATE CREATED:
18/10/2013
DWG
5
GA5009613
Oversize sign,Yellow, Reflective with folded edges
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
1 Name
Ov
DATE EDITED:
MATERIAL:
1
6
GA50032 631
Washer 53/16" Flat SS
4
18/10/2013 Matt
4
DO NOT SCALE DRAWING
SC
7
GA5003643
Washer 8mm Flat SS Heavy Duty
8
8
GA5004713
Bolt M8 x 25 SS A2-70
4
9
GA5052590
Nut M8 Nyloc SS
4
112 - Special Evolution MY13 Parts Manual - Rev 2
QTY. 1 1
4
2 1 1 4
4
2
2
1
1
4
1
1
2 8 12 4 4 8 8 8 4 2 4 4 2 4 4 2
1
1
4
5
6
7
TriTech Boom Centre Assembly
8 A
32
12
5
1
14
26 27
2
31
20
17
24
B
19
17
24
19 17 17 20
16
10
33
C
13
29 3
25 18
13
7
28
D
23
11
15
22 21 4
9
8 30 6
29
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA4658120
Centre Section,Tritech, MY11 on
1
2
GA4658145
Spray bar suit 2011 center section
1
3
GA5075090
Wear pad, 380 x 74 x 12mm, Polystone
4
4
GA4572365
Tilt pin suit MY11 centre section
2
5
GA4658125
6
GA4658130
7
GA4502280
8
GA5075060
9
GA4653316
Tilt arm suit 2011 center RightREhVanNdO CHANGE
DATE1 ECN NO.
Tilt arm suit 2011 center Left hand Pin retainer
GOLDACRES 1M-3ITC1MHOERLLAPNAGRCK R3352 PFAHX:40: 3035354324623693908
Glacier bush 60mm ID x 50mmTITLEl:ong
4
Boom centre 2011 24m fold rBaomommocuenntt1re" 2in0c1h1 Base assembly
2
10
GA457UN2L2ES0S 0OTHERWISE
SPPECinIF,1IED"
diameter x DATE CREATED: 23/03/2010
132.4mm
lonDWg,GwNiOth.
shoulder
and
circlip
groove
2
11
DIMENSIONS ARE IN DEBUR ALL EDGES
GA5018542 DATE EDITED:
MHILyLIMdrETaEuRSlicDLRuACWkNe: yMliynedrser,
MATERIAL:
External
phGaAsin4g9,232.12955"
-bmorye1x3
1.25"
rod
x
18"
1
A3
2/08/2012
stroke
4
Matt
DO NOT SCALE DRAWING
SCALE:1:20
SHEET 1 OF 1
12
GA5018538
Hydraulic cylinder, 3" bore x 1.25" rod x 18" stroke, external phasing (single phase only)
1
13
L003A
Pin, 1 1/8" x 170mm, with circlip groove
4
14
GA4656200
Rose end, Bolt on, Right Hand, Suit 24 - 36m boom
1
15
GA4656201
Rose end, Bolt on, Left Hand, Suit 24 - 36m boom
1
Continued over page
Chapter 13 - Boom Centre - 113
TriTech Boom Centre Assembly
ITEM NO. 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
PART NUMBER GA5001029 GA5017659 GA5000905 GA5006151 GA5012445 GA5000587 GA5000575 GA5000297 GA5001009 GA5075125 GA5000117 GA5006113 GA5001223 GA5001883 GA5012203 GA5003783 GA4922220 GA4922225
DESCRIPTION Nut M16 Nyloc ZP Washer, 1", Flat, ZP, Heavy duty (5mm thick) SHCS M16 x 25 ZP GR8.8 Bolt 1"UNF x 8" x12 TPI ZP GR8 Nut 1"UNF 14 tpi Nyloc ZP Washer 12mm Flat ZP Heavy Duty Washer 12mm Spring SS SHCS M12 x 25 ZP GR12.9 Washer 16mm Flat ZP Heavy Duty Bolt M16 x 325, 60 mm of thread, GR4.4 ZP Washer 10mm Flat SS Heavy Duty Bolt M10 x 20 ZP GR8.8 Circlip, 19mm, E type, zinc plated Circlip, E type, 24mm, zinc plated Grease nipple, Short, 1/4" UNF End cap, Insert, Black, Plastic, 50 x 50 mm Cable Mount Rear, angle fold, Right, 24-36m MY13 Cable Mount Rear, angle fold, Left, 24-36m MY13
SHIMS AVAILABLE Fold Ram Mount Shims GA4513041 Boom Pivot Shims GA4535360 GA4535355 GA4535285
Shim,Tritech Fold ram, 20mm, Suit 4 bolt
Shim, 5mm, Delta boom rose joint Shim, 3mm, Delta boom rose joint Shim, 1mm, Lower rose end, Delta boom
QTY. 2 8 12 4 4 8 8 8 4 2 4 4 2 4 4 2 1 1
114 - Special Evolution MY13 Parts Manual - Rev 2
4
5
6
7
QTY.
st 24+ 1 TriTech Cable Mount - Rear LH
4
UNF
1
S
4
w
4
ed
2
1 1
AL E/E
1
MY13
1
tainer
1
13
asher
2
12
2
11
9
3
7
10
6
5
4
12
2
13
1
6
8
8 A B C D
ITEM NO 1 2 3 4 5 6 7 8 9 10 11 12
4 13
PART NUMBER DESCRIPTION
QTY.
GA4656255
Slide plate, Boom cable adjuster, Left side, Prairie Tritech boom 1
GA5000587
Washer 12mm Flat ZP Heavy Duty
4
GA5009639
Grease nipple, Long, 1/4" UNF thread, 1 1/8" long
1
GA5000575
Washer 12mm Spring SS
4
GA5000311
Set screw, M12 x 35, ZP GR 8.8
4
GA5001009 GA5000939 GA5001029
Washer 16mm Flat ZP Heavy DuRtyEV NO Bolt M16 x 60 Black GR8.8 Nut M16 Nyloc ZP
CHANGE
2DATE
ECN NO.
GOLDACRES1
1-3 MORANG CR MITCHELL PARK 3352
PH: 03 53426399
1 FAX: 03 53426308
GA5017061
Turnbuckle, Eye ends, M22 thread RT&ITeLEla:orcckanbulte, Gmaolvuanntis2e4d-36m LH MY131
GA4572510
Pivot pin, Boom cable MY13
1
GGAA455070215713DUDDA59TNIEEMEBDLITEUEEDSNR:SSAIOOLTLNHESEDRABWGWRoEEISSaoIENsSmhMPEeILCcLrIIFaMI2EbED0TlEemRSrmeMDD2LARAu1ATtTEEW/kRaCN0IeAR:FE6Li:AnM/TlE2Dae:0t1r2,HPievaovtypDinuMtyYSDG1SW3AG4N9O2. 2225
2/08/2012
GA504812M5att
Nut M20 NyloDcO Coar NOT SCALE se ZP DRAWING
SCALE:1:5
1
A3
2
2 SHEET 1 OF 1
Chapter 13 - Boom Centre - 115
3
4
5
6
7
DESCRIPTION
QTY.
e tension adjust 24+ RH
1
asher Zink coated
M16x60 bolt 16 Nyloc nut
M12 WASHER Spring washer SS
35mm Set Screw nipple long 1/4" UNF able pivot pin MY13
TriT2 ech Cable Mount - Rear RH 1 1
4 4
4 1 1
pivot pin retainer MY13 1
vy Duty Flat Washer
2
20 Nyloc nut
2
FRG COMM GAL E/E mm with nut
1
8 A
B
12 11
3
8
7
2
6
10 13
C
9 1
5
11
12
D
2
4
ITEM NO PART NUMBER DESCRIPTION
QTY.
1
GA4656250
Slide plate, Boom cable adjuster, Right side, Prairie Tritech boom
1
2
GA5001009
Washer 16mm Flat ZP Heavy RDEVuNtyO CHANGE
2 DATE ECN NO.
3
GA5000939
Bolt M16 x 60 Black GR8.8
GOLDACRES 1 1-3 MORANG CR MITCHELL PARK 3352 PH: 03 53426399
4
GA5001029
Nut M16 Nyloc ZP
1 FAX: 03 53426308
TITLE:
5
GA5000587
Washer 12mm Flat ZP Heavy RDeuatrycable mount 24-36m RH MY13
4
6
GA5000575
Washer 12mm Spring DATECREATED: SS
UNLESS OTHERWISE SPECIFIED 21/06/2012
DWG NO.
7
GA5000311
Set screw, M12 x 35, ZP GR 8.8 DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
GA4922220
4 4 A3
DATE EDITED:
MATERIAL:
3
84
GA5009639
2/08/2012 Matt
Grease nippleD,OLNoOTnSCgAL,E 1/4" DRAWING UNF mSaCAlLeE:1:4thread, 1 1/8" long
SHEET 1 OF 1
1
9
GA4572510
Pivot pin, Boom cable MY13
1
10
GA4572515
Boom cable retainer, Pivot pin MY13
1
11
GA5001739
Washer 20mm Flat Heavy Duty SS
2
12
GA5048125
Nut M20 Nyloc Coarse ZP
2
13
GA5017061
Turnbuckle, Eye ends, M22 thread & lock nut, Galvanised
1
116 - Special Evolution MY13 Parts Manual - Rev 2
4
5
6
7
8
QTY.
1 4
Flow Meter Assembly
A
2
6
6
2
4
4
4
1
2
4
B
5
3
987
6
C
ITEM NO. 1 2 3 4 5 6 7 8 9
PART NUMBER 0630171793
Flow meter 063-0171-793 Parts DESCRI1PT0I6O-N0159-514 Body only Flowmet0e6r,3R-F0M16701P,-6Ra6v9enSensor only
QTY.
D
1
M200CPG
Plumbing coupling, Straight, 2" flange x 2" flange x 4 1/2" long
4
M200125BRB90 Hose barb, Elbow, 90 degree, 2" flange x 1 1/4" hose, Banjo
2
GA5009335
Seal, 41.5 ID x 55 OD x 6.5mm thick, EPDM, suit 1 1/2" flange 6
FC200
Clamp,Worm screw, Use with 2" standard flange port, Banjo
6
GA5006689
Clamp Exhaust 2 5/8" (C12)
2
GA4552080
Crush tube, 10.2 ID x 15 OD x 5mm long
4
GA5003643
Washer 8mm Flat SS Heavy Duty
4
GA5052590
Nut M8 Nyloc SS
4
063-0171-793 106-0159-514 063-0171-669
REV NO CHANGE
DATE ECN NO.
FLOW METER PARTS Flow meter assembly
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399 FAX: 03 53426308
Flow meter Body onlyTITLE: Flow meter sensor onFlylow meter assembly
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 9/03/2010
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DWG NO.
GA4903084-PA
A3
DATE EDITED:
MATERIAL:
17/08/2012
4
Matt
DO NOT SCALE DRAWING
SCALE:1:15
SHEET 1 OF 1
Chapter 13 - Boom Centre - 117
TriTech Centre With Tilt Replacement Links
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA4922195
Boom centre 2011 Base assembly
1
2
GA5075135
Tilt cylinder replacement adjustable top link (black)
2
3
GA4572135
Spacer bush, 40 OD x 25.8 ID x 9mm thick, Paralift arm spacer
4
4
DB-ADJ-02
Bush, Short, 40 OD x 25.5 ID x 23.75mm long
4
TriTech Centre With Tilt Cylinders
ITEM NO. 1
2
PART NUMBER GA4922195
GA5065051
DESCRIPTION Boom centre 2011 Base assembly Hydraulic cylinder, 3.5" OD x 1.75" rod x 5" stroke,TriTech tilt cylinder
118 - Special Evolution MY13 Parts Manual - Rev 2
QTY. 1
2
4
5
6
7
QTY. 1
TriTech Paralift & Paralift Arms
2 6 16
2
10
4
17
8
A
16
2
8 10 6 2 2 10 11 1 2
2 1 1
t shown.
1 19 18
7
15
5
B
10
9
8
3
12
11
C
13
20
4
2
3
6
14
D
10
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA4658135
Paralift Rear, Suit MY11 Center
1
2
GA5066675
Pin with retaining plate, Stepped, 294mm Long
2
3
GA5066655
Pin with retaining plate, 28.575 OD x 180mm long
6
4
GA5065486
Glacier bush 1 1/8" x 1" long
16
5
GA5066645
Pin with retaining plate, 1" x 280mm long, Paralift chassis ram
2
6
MACH0152
Bush with shoulder, 12.3 IDRExV 2N5O ODCHxAN2G1Emm long
DATE E1C0N NO.
7 8
GA4572135 GA4562190
GOLDACRES Spacer bush, 40 OD x 25.8 ID x 9mm thick, Paralift arm space1Mr-3ITCMHOERLLAP4NAGRCK R3352
Spacer bush, 40 OD x 26 ID x 17.5mm long, Paralift arms PFAHX: 0: 30353543224623693908
9
GA5050450
Grease nipple M6
TITLE:
Para lift + para arms 2013
8
10
GA5067885
Pin cover, Black, clip on, plastic
10
11
DATE CREATED:
GA5050355 End cap, 76.1 mm UNLESS OTHERWISE SPECIFIED 21/01/2010 DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
round,
sDGuWiAtG46N95O2. N22B06p-0ip1e,
Black
plastic
12
S89-0812 DATE EDITED:
Hydraulic MATERIAL: adaptor, 90 Degree Elbow 1/2" BSP- 3/4" UNO
6 A3 2
31/07/2012
4
13
GA5M0at0t 0835
Valve, BDaOlNlO, THSCyALdE DrRaAWuINlGic, 1/2" femSCaALlEe:1:20thread inlet / outlet
SHEET 1 OF 1
2
14
GA5051470
SHCS M12 x 50 ZP GR12.9
10
15
GA5012461
Nut M12 Nyloc ZP
11
16
GA4903058
Pre-assembled accumulator manifold
1
17
GA5007787
Accumulator, Hydraulic, 1L, precharged to 70 bar
2
18
GA5070082
Hydraulic cylinder - 2.5" bore, 2" rod, 21" Stroke
2
19
GA4659305
Top Paralift Arm MY12
1
20
GA4659310
Bottom Paralift Arm MY12
1
Chapter 13 - Boom Centre - 119
QTY. 2
1
1
r
4
4
1
4
2
4
7
1
2
4
4 4
16
8
6
4
8
4
r
8
rt
4
2
p
1
4 TriTech Co5 mplete Cen6tre & Paralif7t
4
9 18
4 16 15 15 23
8 A
1
15 16 17
3
24
15 17
15 16
8 5
9
11
B
20
19
6
2 22
7
C
6 14 21 21 13
12 19 19 20
16 15 15 17
D
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA4656240
Delta link, Long
2
2
GA5067855
Delta link, short, heavy duty
1
3
DELTA-LINKSA Delta link, short, heavy duty, adjustable
1
4
GA4656260
Adjuster bolt, Delta link hanger
4
5
GA5006537
Bump stop, Rubber, 150mm with hole
4
6
GA4658140
Shocker mount pivot suit 2011 centre
4
7
GA5015139
Shock Absorber, Double eye, 19mm eye, 82mm OD, Black
2
8
GA4572315
Bump stop,Travel limiter, SuiRtEcVeNnOter sCeHcAtiNoGnE
DATE 4ECN NO.
1-3 MORANG CR
9
GA5000587
GOLDACRES Washer 12mm Flat ZP Heavy Duty
MITCHEL7L PARK 3352
PH: 03 53426399
10
GA5011239
Bolt, M12 x 50, ZP GR 8.8
FAX: 03 513426308
TITLE:
11
GA5000271
Bolt M12 x 140 ZP GR8.8 complete center + para lift
2
12
GA5001029
Nut M16 Nyloc ZP
13
GA5049490 Bolt 3/4" UNC x 4" ZP GR8 DATECREATED:
UNLESS OTHERWISE SPECIFIED 21/01/2010
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DWG NO.
GA4922205-02
14
GA5048430 DATE EDITED:
Nut, Nyloc, MATERIAL: 3/4" UNC, ZP
4/12/2012
4
15
GA5M0at1t 7659
Washer,DO1N"O,TFSClAaLtE,DZRAWPI,NGHeavy dutSyCA(LE5:1:m20 m thick)
4
4 A3
4
SHEET 1 OF 1
16
16
GA5012445
Nut 1" UNF 14 tpi Nyloc ZP
8
17
GA5006043
Bolt 1" UNF x 6" x 14 TPI ZP GR8
6
18
GA5012461
Nut M12 Nyloc ZP
4
19
GA5001009
Washer 16mm Flat ZP Heavy Duty
8
Continued over page
120 - Special Evolution MY13 Parts Manual - Rev 2
ITEM NO. 20 21 22 23 24
PART NUMBER GA5000855 GA5001739 GA5012203 GA 4683145 GA4922185
DESCRIPTION
Bolt M16 x 110 ZP GR8.8
Washer 20mm Flat Heavy Duty SS
Grease nipple, Short, 1/4" UNF
Bolt, 1" UNC x 6", cut down from 7
Adjustable delta link lock up assembly (delta link not included)
Lower Limit Switch
QTY. 4 8 4 2 1
Mountingboltsetc included withGA5012129
ITEM NO. 1 2 3 4 5 6 7
PART NUMBER GA4523965 GA4654161 GA5067080 GA5012129 GA5000117 GA5065455 GA5000141
DESCRIPTION EF Evo 2011 Boom Height Adjustment Bracket Bracket mount Paralift Switch Knob Bolt M8 x 20 Limit switch, Flexible arm, Micro, IP65, 10 Amp Washer 10mm Flat SS Heavy Duty Bolt M10 x 30 ZP GR8.8 Nut M10 Nyloc ZP
QTY.
1
1
2
1
4
2
2
Chapter 13 - Boom Centre - 121
TriTech Spring Yaw Kit
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA5075095 Spring,Tension, 95 OD x 330 long x 14mm, suits boom yaw from 2011 2
2
GA4572385 Pin, 25 OD x 195.6mm long, Suit chock absorber and spring mount 4
3
GA5001223 Circlip, 19mm, E type, zinc plated
8
4
GA5075150 Eye Bolt 12mm x 100mm Short
4
5
GA5000587 Washer 12mm Flat ZP Heavy Duty
4
6
GA5012461 Nut M12 Nyloc ZP
4
7
GA5075115
Shock absorber, Heavy duty, Eye ends 15 ID, Suit TriTech spring yaw2
8
GA5001009
Washer 16mm Flat ZP HeavyDuty
4
9
GA5001029 Nut M16 Nyloc ZP
4
122 - Special Evolution MY13 Parts Manual - Rev 2
5
6
TriTech Hydraulic Yaw
7
8
11
A
Located on chassis
12
14 7 15
5 B
9
8 10
8
6 3224
13 15
C
4223
ITEM NO. 1 2 3 4 5 6
7 8 9 10 11 12 13 14 15
PART NUMBER GA5060817 GA5017659 GA5006043 GA5012446 S93-0409 S24-0804
S82-0404 GA5001739 GA5007787 S160-080816 S82-0808 S167-080808 GA4906726 GA4906727 GAS99-603
DESCRIPTION
QTY.
Hydraulic cylinder, 2" bore x 1 1/4" shaft x 117.5mm stroke, Spherical bearing ends
2
Washer, 1", Flat, ZP, Heavy duty (5mm thick)
8
Bolt 1" UNF x 6" x 14 TPI ZP GR8
4
Nut 1" UNF 12 tpi Nyloc ZP
4
Hydraulic adapter, Nipple, 1/4" BSPT x 9/16" UN o-ring
8
Hydraulic adaptor, Reducing bush, 1/2" BSPT male x 1/4" BSPT
D
female
2
Hydraulic adapter, Elbow, 90 degree, 1/4" BSP male x 1/4" BSP female swivel
4
Washer 20mm Flat Heavy Duty SS
4
Accumulator, Hydraulic, 1L, precharged to 70 bar
2
Hydraulic adaptor, Inline test point, 1/2" BSP female swivel x 1/2" BSP male x M16 x 2.0 test port
2
Hydraulic adapter, Elbow, 90 degree, 1/2" male x 1/2" female swivel 2
Hydraulic adapter,Tee, 1/2" male BSP x 1/2" male BSP x 1/2" female swivel
1
Yaw Control Valve Assembly
1
Pressure Reducer Valve Assembly, Crop Cruiser & Prairie
1
Hydraulic adaptor, BulkheRaEdVniNppOle, 1/2C"HBASPNmGaEle x 1/2" BSP male
2DATE ECN NO.
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 Chapter 13 - Boom CPeHn:t0re3 -51342236399 FAX: 03 53426308
TITLE:
Hydraulic yaw kit suit non spool valves 2011
A
B Yaw Pressure Reducing Valve
1 GA5047708 2 GA5007060 3 S27-0804
4 S75-0806
P
Check V Hydraulic a Hydraulic ada
5 S82-0808
Hydraulic adap
6 GA5011419
7 GA5004437
8 GA5004447
9 GA5000835
B
C
9 4
8 7
6
D
4
1
4
5
2
9
E
3
REV
ITEM NO. PART NUMBER DESCRIPTION
TITL
QTY.
Hy
F
1
GA5047708 Valve, Pressure reducing, Hydraulic, 10 - 140bar
1 UNLESS OTHERWISE SPECIFIED
DATE CREATED:
15/05/2012
DW
2
1
GA5007060 2
DIMENSIONS ARE IN MILLIMETERS DRAWN:
Valve, Check, Hydraulic, 1/2" BSPP female inlet & outlet, 45DELBU/RmALinL EDGES
DATE EDITED:
flow, Maximum3 320bar
4
12/11/2013 Matt
Name
1
MATERIAL:
DO NOT SCALE DRAWING
GA
S
3
S27-0804
Hydraulic adaptor, Nipple, 1/2" BSP x 1/4" BSP
1
4
S75-0806
Hydraulic adaptor, Nipple, 1/2"BSP male x 3/8" BSP male with o-ring 3
5
S82-0808
Hydraulic adapter, Elbow, 90 degree, 1/2" male x 1/2" female swivel 1
6
GA5011419 Bolt M6 x 50 SS
2
7
GA5004437 Washer 6mm Flat SS
2
8
GA5004447 Washer, 6mm, Spring, SS
2
9
GA5000835 Valve, Ball, Hydraulic, 1/2" female thread inlet / outlet
2
124 - Special Evolution MY13 Parts Manual - Rev 2
1
2
3
4
5
6
7
8
ITEM NO.
PART NUMBER
DESCRIPTION
MY13 Plus/QTY.
Yaw Control Valve Assembly A
1
RL20-0404
2
S50-040404
Ball valve 1/4" BSP
2
S50-040404
3
A
3
S26-0404
Hydraulic adapter, Socket, 1/4" female BSP x 1/4" female BSP
2
4
RG01-250
pressure guage 250 BAR
2
5
GA5049800
M4 x 40 SHCS
2
6
GA5020510
M4 Washer Heavy duty SS
4
7
GA5049025
Nut M4 Nyloc SS
2
B
8
S25-0404
Elbow 90deg 1/4"M x 1/4"F
1
B
4
3
C
C
5 6
D
D
8
2
6
1
2 7
1
E
2
3
4
REV NO CHANGE
DATE ECN NO.
ITEM NO. PART NUMBER DESCRIPTION
1
RL20-0404
Valve, Ball, Hydraulic, 1/4" BSP female thread inlet / outlet
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399
TITLE:
QTY.
FAX: 03 53426308
Yaw Control Valve Assembly
2
F 1
2
S50-040404
2
3
Hydraulic adaptor,Tee, 1/4" BSP male x 1/4" BSP male x 1/4" BSP DATECREATED:
UNLESS OTHERWISE SPECIFIED 12/09/2012
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Name
DWG NO.
GA4906726
male
4
DATE EDITED:
12/11/2013 Matt
MATERIAL: DO NOT SCALE DRAWING
SCALE:1:2
3
SHEET 1 OF 1
A3
3
S26-0404
Hydraulic adapter, Socket, 1/4" female BSP x 1/4" female BSP
2
4
RG01-250
Gauge, Pressure, 250 bar
2
5
GA5049800 SHCS M4 x 40 ZP GR12.9
2
6
GA5020510 Washer 4mm Flat SS
4
7
GA5049025 Nut M4 Nyloc SS
2
8
S25-0404
Hydraulic adaptor, Elbow, 90 degree, 1/4" BSPT male x 1/4" BSPT female
1
Chapter 13 - Boom Centre - 125
Oversize Sign Mount
ITEM NO. PART NUMBER
1
GA4658150
2
GA5009613
3
GA5075160
4
GA5000587
5
GA5012461
6
GA5004883
7
GA5052590
8
GA5003645
9
GA5004713
DESCRIPTION
QTY.
Bracket, Oversize sign mount arm, Bolt on, 2011 centre
2
Oversize sign,Yellow, Reflective with folded edges
1
U bolt, Square top M12 x 76 x 80mm
2
Washer 12mm Flat ZP Heavy Duty
4
Nut M12 Nyloc ZP
4
Washer 8mm Flat ZP Heavy Duty
4
Nut M8 Nyloc SS
4
Washer, 5/16" ID x 1 1/4" OD, Flat SS Bolt M8 x 25 SS
4
4
126 - Special Evolution MY13 Parts Manual - Rev 2
3
Delta4 Link Locki5ng Plate 6
TION
uit adjustable nk RT U Bolts S/S 316
Washer
QTY.
1
1 2 2
7
3 4 1
8 A
B
C
2
ITEM NO. 1 2 3 4
PART NUMBER GA4524140 GA5018245 GA5052590 GA5003643
DESCRIPTION Locking plate suit adjustable delta link SS U Bolt M8 x 50 x 60 Round Top Nut M8 Nyloc SS Washer 8mm Flat SS Heavy Duty
D
QTY. 1 1 2 2
rom rotating at one end
of the centre adjuster o it may not have to be moved pending on length of the link
3
4
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 4/08/2011
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DATE EDITED:
MATERIAL:
4/12/2012
Matt
DO NOT SCALE DRAWING
REV NO CHANGE
DATE ECN NO.
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399 FAX: 03 53426308
TITLE:
Adjustable delta link lock up assembly 2011
DWG NO.
GA4922185
A3
SCALE:1:2
SHEET 1 OF 1
Chapter 13 - Boom Centre - 127
Valve nts/QTY.
A
Boom Valve Assembly
1
B
5
11
9
2
7
2
10
12
12
4
C
36 7
8
8
D
oom oom oom oom oom oom
4
ITEM NO 1 2 3 4 5 6 7 8 9 10 11 12
PART NUMBER GA5065515 GA5065810 GA5065800 GA5065680 GA5065620 GA5065805 GA5004883 GA5011499 GA5004711 GA5004917 41214 GA5012507
DESCRIPTION
QTY.
Boom valve, Single, AS24, 3 wire, 3 pin AMP connector, Altek
3
End cap, Altek boom valve
2
Altek boom valve mounting bracket
2
Plug, AS40 male, Altek
1
Hose barb, Elbow, 90 degree, AS40 x 33mm hose barb, Altek
1
Connecting rod suit 3 bank (303 SS)
2
Washer 8mm Flat ZP Heavy Duty
12
Nut M8 Hex ZP Bolt M8 x 25 ZP GR8.8 Nut M8 Nyloc ZP O-Ring 42.0 x 3.0 O-Ring 55.25 x 2.62
REV NO CHANGE
8DATE ECN NO.
GOLDACRES4
1-3 MORANG CR MITCHELL PARK 3352
4 PH: 03 53426399
FAX: 03 53426308
TITLE:
2
Boom valves assem
2
GA5065805
UNLE3SSSOecTHtiEoRnWIcSoE nSPnEeCcIFtIiEnDg
rodDATE CREATED: 9/10/2009
GA4562055 DDIEMBUE4NRSSAIeOLcLNtESioDAGnREEcSIoNnMnIeLLcIMtinETgERrSodDBRoAWoN:m valves assem
GA50D6W5G7N4O0. 3 Section Boom Valves GA5036S5e74c1tion 4BoSoecmtioVnaBlovoems Valves
A3
GA4562125
5 Section DATE EDITED:
17/11/2014
connecting
MATERIAL:
rod
GA5065704 5 Section Boom Valves
David
DO NOT SCALE DRAWING
GA4562050 6 Section connecting rod
GA5065SC7A0LE5:1:5
6 Section Boom Valves
SHEET 1 OF 3
GA4562045 7 Section connecting rod
GA5065706 7 Section Boom Valves
GA4562040 8 Section connecting rod
GA5065710 8 Section Boom Valves
Note: Boom valve assemblies do not come with plumbing fittings.
128 - Special Evolution MY13 Parts Manual - Rev 2
Boom Valves
ITEM NO. PART NUMBER
1
80364
2
GA5065515
3
GA5053510
4
GA5065830
5
80376
6
37621
7
GA5065695
8
47825
9
80014
10
80323
11
80004
12
80414
13
80005
14
80322
15
GA5065825
16
GA5065701
17
GA5065835
18
37628
19
GA5065640
DESCRIPTION
Valve body
Tee body
O-ring 30 x 2 fmp 75
O-ring 30 x 4 fmp 75
Plug
O-ring 18 x 2.5 fmp 75
AS24 Safety Pin
Safety pin
C-clip
Washer
Disk seal fpm 90
O-ring 8 x 2 fmp 75
Disk spring locator
Spring 25mm
Manifold
Safety pin AS30
Plug in hose tail AS30/AS24
O-ring 18 x 2.5 fmp 75
Female Hose AS24/20
QTY.
1
1
1
2
1
1
2
1
2
2
2
2
2
1
1
2
1
1
1
Chapter 13 - Boom Centre - 129
130 - Special Evolution MY13 Parts Manual - Rev 2
MBER er Pivot
a boom em a boom t assem
DESCRIPTION
QTY. 1
1
1
10
Washer 10mm SS Heavy duty
20
Bolt M10x40 GR10.9 ZP
10
M10 Nyloc Nut
10
boom wing M16x60 bolt
1
Nut ZP M16
1
2
3
4
Cable Drum - Delta
1
Chapter 14
5
6
7
2
4 3
57
6 98
ITEM NO. PART NUMBER DESCRIPTION
1
GA4657745
12-21m Outer Pivot Assy (Left Hand)
2
-
12-21m delta boom top pivot Assembly
3
-
12-21m delta boom lower pivot Assembly
4
F70771A
Shim, 1mm, Cable drum pivot, 12 - 21m Delta boom
5
GA5000117
Washer 10mm Flat SS Heavy Duty
6
GA5006071
Bolt M10 x 40 ZP GR10.9
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 12/10/2009
7
GA5000141
Nut M10 Nyloc ZP
DIMENSIONS ARE IN MILLIMETERS DRAWN: DEBUR ALL EDGES
DATE EDITED:
MATERIAL:
2
8
GA53000939
Bolt M164 x 60
Black
GR8.8
23/10/2013 Matt
DO NOT SCALE DRAWING
9
GA5012385
Nut M16 Hex ZP
QTY.
1
1 REV NO CHANGE
DAT
1
1-3
GOLDACRES
MI PH
10
FA
TITLE:
20
10 DWG NO. Cable1_0Drum_Pivot_Assembly
1 SCALE:1:5 1
SHEET 1 OF 1
Chapter 14 - Boom Wing - 131
6
GA5012203
7
GA5000117
8
GA5020115
9
GA5006041
10
GA5000137
11
GA5017659
12
GA5012446
Grease Nipple 1/4" UNF Short
1
Washer 10mm SS Heavy duty
4
M10 x 30 Unbrako
4
Bolt, 1" x 5 1/2" UNF
1
Washer 10mm Spring S/S
4
Washer 1" Flat HD ZP
2
Nut 1 UNF 12 tpi Nyloc ZP
1
Cable Drum Top Pivot - Delta
9 11 3 5
2
8
1
10 7
6
4
11
12
ITEM NO. PART NUMBER
1
MACH0123
2
GA5015659
3
MACH0119
4
DB-ADJ-02
5
GA5010573
6
GA5012203
7
GA5000117
8
GA5020115
9
GA5006041
10 GA5000137
11 GA5017659
12 GA5012446
DESCRIPTION 12-24m boom hinge block (Bolt on) Bearing, Spherical bush, 34.925 ID x 55.663 OD x 30.150mm thick, GEZ34ES2RS Short centre pivot bushs (40mm bright) Bush, Short, 40 OD x 25.5 ID x 23.75mm long Circlip, Internal, 59 OD unsprung, Suit 55mm bore Grease nipple, Short, 1/4" UNF Washer 10mm Flat SS Heavy Duty SHCS M10 x 30 ZP GR12.9 Bolt 1" UNF x 5 1/2" ZP GR8 Washer 10mm Spring SS Washer, 1", Flat, ZP, Heavy duty (5mm thick) Nut 1" UNF 12 tpi Nyloc ZP
QTY. 1
1
1 1 1 1 4 4 1 4 2 1
132 - Special Evolution MY13 Parts Manual - Rev 2
4
GA5010573
5
GA5012203
6
GA5000117
7
GA5020115
8
GA5006039
9
GA5000137
10
GA5017659
11
GA5012446
55mm internal circlip
1
Grease Nipple 1/4" UNF Short
1
Washer 10mm SS Heavy duty
4
M10 x 30 Unbrako
4
Bolt 1 x 4 1/2 UNF 12 tpi ZP GR8
1
Washer 10mm Spring S/S
4
Washer 1" Flat HD ZP
2
Nut 1 UNF 12 tpi Nyloc ZP
1
Cable Drum Lower Pivot - Delta
8 10 3
4
2
7
9
6
1
5
3 10
11
ITEM NO. 1
2
3 4 5 6 7 8 9 10 11
PART NUMBER MACH0123
GA5015659
DB-ADJ-02 GA5010573 GA5012203 GA5000117 GA5020115 GA5006039 GA5000137 GA5017659 GA5012446
DESCRIPTION 12-24m boom hinge block (Bolt on) Bearing, Spherical bush, 34.925 ID x 55.663 OD x 30.150mm thick, GEZ34ES2RS Bush, Short, 40 OD x 25.5 ID x 23.75mm long Circlip, Internal, 59 OD unsprung, Suit 55mm bore Grease nipple, Short, 1/4" UNF Washer 10mm Flat SS Heavy Duty SHCS M10 x 30 ZP GR12.9 Bolt 1" UNF x 4 1/2" ZP GR8 Washer 10mm Spring SS Washer, 1", Flat, ZP, Heavy duty (5mm thick) Nut 1" UNF 12 tpi Nyloc ZP
QTY. 1
1
2 1 1 4 4 1 4 2 1
Chapter 14 - Boom Wing - 133
1
2
3
4
A Boom Fold Adjuster - Delta
4
7
6
6
B
5
5
1
C
3 9 2
10
D
10 12
E
5
ITEM NO.
6
PART NUMBER
1
24mk4DB005LAS
2
FAB0201
3
24mk4DB006MACH
4
GA5008519
5
GA5017659
6
GA5006043
7
GA5006039
8
GA5001223
9
GA5010991
10
GA5012445
11
GA4572200
12
2.5X16-B
11 8
F
ITEM NO. PART NUMBER DESCRIPTION
1
24mk4DB005 Adjuster plate, Fold ram,Tritech boom
QTY.
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 24/10/2013
2 DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Name
DATE EDITED:
MATERIAL:
12
FAB0201
2
Adjusting bolt, 1" 3x 280 long thread, Bush4 one end, Fold ram2M4aa/1tdt0/j2u01s3ter,
1
DO NOT SCALE DRAWING
suit up to 24m boom
3
24mk4DB006 Bush / pin, Fold ram adjuster nut and bolt retainer
1
4
GA5008519 Circlip, External, 25mm
2
5
GA5017659 Washer, 1", Flat, ZP, Heavy duty (5mm thick)
19
6
GA5006043 Bolt 1" UNF x 6" x 14 TPI ZP GR8
2
7
GA5006039 Bolt 1" UNF x 4 1/2" ZP GR8
1
8
GA5001223 Circlip, 19mm, E type, zinc plated
2
9
GA5010991 Nut 1" UNF 12 tpi ZP
4
10 GA5012445 Nut 1" UNF 14 tpi Nyloc ZP
3
11 GA4572200 Pin, 1" diameter x 132.4 long,With shoulder and circlip groove
1
GA5018555 Hydraulic cylinder SLPSP (tld) 2 1/2" x 18" stroke
1
12
GA5018557 Hydraulic cylinder SLPSP 2 3/4" bore 18" stroke
Note: Right hand side shown, all quantites shown are for one side only.
134 - Special Evolution MY13 Parts Manual - Rev 2
CRIPTION
QTY.
le Spring Shocker uit 2012 delta
1
A
RG COMM GAL E/E m with nut
1
vy Spring
2
dual spring mount
2
ckle (Now use 5075230)
1
SS washer
2
6x60 bolt Nyloc nut
Boo22 m Cable Spring - Delta
her Zink coated
2
B
5 2
6
C
7
7
8
D
4
9
3
1
8
REV NO CHANGE
DATE ECN NO.
ITEM NO. 1 2
PART NUMBER GA4658375 GA5017061
DESCRIPTION
GOLDACRESQTY. 1-3 MORANG CR MITCHELL PARK 3352 PH: 03 53426399
Mount, Boom cable spring, Suit 18 - 24 meter Delta boom, 2012
1FAX: 03 53426308
TITLE:
Turnbuckle, Eye ends, M22 thread & lock nut, GalvaniSsueidt Delta MY12 cente1r
Spring, tension, 70 OD x 329 long x 12mm, large, suit delta boom
3
GA5010793
DATE CREATED:
yaw / cable UNLESS OTHERWISE SPECIFIED 14/06/2013
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DWG NO.
2
Boom front spring mount Assem 2013
A3
4
GA4522755
Mount for Delta boom dual spring DATEEDITED: 24/10/2013
MATERIAL:
3
4
Matt
DO NOT SCALE DRAWING
SCALE:1:5
2
SHEET 1 OF 1
5
GA5075230 Bow Shackle 13mm WLL 3.25T Black
1
6
GA5001043 Washer 16mm Flat SS HD
2
7
GA5000939 Bolt M16 x 60 Black GR8.8
2
8
GA5001029 Nut M16 Nyloc ZP
2
9
GA5001009 Washer 16mm Flat ZP Heavy Duty
2
Chapter 14 - Boom Wing - 135
C
Steel Inner Wings - Delta
D
Part Number Description GA4657720 18-24m Delta wing Heavy RH (5001mm long) GA4657725 18-24m Delta wing Heavy LH (5001mm long)
E
1
2
3
Steel Outer Wings - Delta
F
A
1
2
3
4
4
5
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 15/01/2003 DIMENSIONS ARE IN MILLIMETERS DRAWN: DEBUR ALL EDGES
DATE EDITED:
22/10/2013
MATERIAL:
Coen
DO NOT SCALE DRAW
B
C
D
X
Part Number GA4655920
GA GA4655925 EGA4655928 GA4655930
Description 18m Delta Mk2.0 steel outer wing (1508mm long) 12m Delta Mk2 steel outer wing (2313mm long) 18m Delta Mk2 steel outer wing (2948mm long) 20m Delta Mk2.0 steel outer wing (3948mm long) 21m Delta Mk2.0 steel outer wing (4448mm long)
136 - Special Evolution MY13 Parts Manual - Rev 2
F
UNLESS OTHERWISE SPECIFIE DIMENSIONS ARE IN MILLIME
1 Aluminium2 Outer Wi3ngs - Delta 4
5
6
A
B
C
D
X
Part Number Description
GA4656057 Delta 18m aluminium outer wing suit breakaway (1150mm long)
GA4656056 Delta 21m aluminium outer wing suit breakaway (2362mm long)
E
GA4656055 Delta 24m aluminium outer wing suit breakaway (3862mm long)
GA4657770 Delta 18m aluminium outer wing (4450mm long)
GA4655935 Delta 24m aluminium outer wing (5950mm long)
RE
TITL
Bo
F
UNLESS OTHERWISE SPECIFIED
DATE CREATED:
19/09/2011
DW
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
T.Watts
GA
DATE EDITED:
MATERIAL:
22/10/2013
1
2
3
4
Coen
DO NOT SCALE DRAWING
Chapter 14 - Boom Wing - 137
1
2
3
4
A
Flip Over Ends
4 1
B
2
5
ITEM NO. 1
2 3 4
5 6
C
3
6
6
5
6
2
3
4
MBER
DESCRIPTION
QTY.
5
4
MountinIgTEPMlatNeO. PART N1UMBER DESCRIPTION
0D 1
RHSM-1520xN5y0lox3ccnuut1t1Z0/P0 SCGA465611110
Flip over end bracket only
7 Washer M12 Flat ZP H2eavy DGutAy50661910
3
50x50mm 0.8-2.5 In3sert CaGp A50111175
Bolt M10 x 160 ZP GR8.8 Bolt M10 x 60 ZP GR8.8
4
GA5000141
Nut M10 Nyloc ZP
5
GA5012459
Nut M10 Hex ZP
6
GA5000115
Washer 10mm Flat SS
E
Flip Over End Saddle
5
2
1
6
7
QTY. 1 1 2 3 2 10
4
3
F
1
2
3
4
ITEM NO. PART NUMBER DESCRIPTION
1
FOE-005LAS Mounting plate
2
GA4656310
Boom flipover saddle suit 50mm top cord
3
GA5012461
Nut M12 Nyloc ZP
4
GA5000577
Washer 12mm Flat SS Heavy Duty
5
GA5003783
End cap, Insert, Black, Plastic, 50 x 50 mm
138 - Special Evolution MY13 Parts Manual - Rev 2
UNLESS OTHERWISE SPECIFIE DIMENSIONS ARE IN MILLIM DEBUR ALL EDGES
DATE EDITED:
11/11/2013 Matt
QTY. 1 1 1 1 1
REV NO CHANGE
GOLDACRES
TITLE:
Rubber Bump Stop
ITEM NO. 1 2 3 4
PART NUMBER GA5006225 GA5004437 GA5004103 GA5048115
DESCRIPTION Boom stopper, Rubber, 143mm bumper, Suits 50 x 50mm RHS Washer 6mm Flat SS Bolt M6 x 70 ZP GR8.8 Nut M6 Nyloc ZP
QTY. 1 4 2 2
Bump Stop Extension Bracket
ITEM NO. 1 2 3 4
PART NUMBER GA4522995 GA5004103 GA5048115 GA5004437
DESCRIPTION Extension bracket Rubber bump stop Bolt M6 x 70 ZP GR8.8 Nut M6 Nyloc ZP Washer 6mm Flat SS
QTY. 1 3 3 6
Chapter 14 - Boom Wing - 139
Boom Protector - Inner - Delta
ITEM NO. PART NUMBER DESCRIPTION
QTY.
F70799A
Protector, Outer wing, Suit 50 x 50 RHS, 600 long, 2mm SS
1
F70287A
Protector, Outer wing, Suit 50 x 50 RHS, 400 long, 2mm SS
1
F70294A
Protector, Outer wing, Suit 50 x 50 RHS, 200 long, 2mm SS
2
GA5004437
Washer 6mm Flat SS
4
3
GA5004103
Bolt M6 x 70 ZP GR8.8
2
4
GA5048115
Nut M6 Nyloc ZP
2
Boom Protector - Outer - Delta
ITEM NO. 1 2 3 4
PART NUMBER GA4656284 GA5011251 GA5012461 GA5000577
DESCRIPTION Delta boom fold saddle suit 50mm top cord U Bolt M12 x 52mm x 80mm Square Top Nut M12 Nyloc ZP Washer 12mm Flat SS Heavy Duty
140 - Special Evolution MY13 Parts Manual - Rev 2
QTY. 2 4 8 8
4
5
6
7
8
QTY.
Tritech
1
A
sembly pivot
1 Cable Drum - TriTech
6
4
1
1 2
Optional boom weights
9 8 8 11 16
40
GR8.8
10
10
20
17 B 9 8 8 11
ed
6
outer
1
7445
19 18 1 3
2
3
20
um small 1 12
um 1.8kg 1
C
unf 12 TPI 1
15
F
1
1
te MY13
1
21 6447
9 8 8 11
D
32
14 12 12 15
13
10 8 8 11
10 8 8 11
ITEM NO.
1
2
3
4
5
6
4
7
8
9
10
11
12
13
14
15
PART NUMBER GA4932342 DB-ADJ-16LAS
DESCRIPTION
REV NO CHANGE
DAQTETY. ECN NO.
1-3 MORANG CR
GOLDACRES See next page for cable drum part numbers
MIT-CHELL PARK 3352
PH: 03 53426399
Bearing pivot kit, Upper, Suit Tritech cable drum hinge
FAX1: 03 53426308
Shim, cable drum pivot, SS, 1mm TITLE:
6
GA5017681 Washer 1" x 2" x 7g Flat Thin SS
4
GA50061UDNI5ML1EESNSSIOOTNHSERABWREoISIENltSMP1EILC"LIIFUMIEENDTERFS
GA5006039 DEBUR DATE EDITED:
ALL
EDGBEoS lt
1"
UNF
DATE CREATED:
x23/802"/2x0111 2 TPI ZP
DRAWN:
x 4 1/2" ZP GR8 Luke M
MATERIAL:
GRD8WG NO.
Cable drum
suit
2013
Evo
1
A3
1
31/07/2012
GA5012M4a4t6t
Nut 1" UNF 12 tpi Nyloc ZP DO NOT SCALE DRAWING
SCALE:1:10
2 SHEET 1 OF 1
GA5000577 Washer 12mm Flat SS Heavy Duty
40
GA5000327 Set Screw M12 x 45 ZP GR8.8
10
GA5012461 Nut M12 Nyloc ZP
20
GA5001009 Washer 16mm Flat ZP Heavy Duty
6
GA4932343 Bearing pivot kit, Lower Tritech cable drum hinge
1
GA4522725 Boom hose mount plate outer
1
GA5000935 SHCS M16 x 50 ZP GR12.9
2
GA5001029 Nut M16 Nyloc ZP
3 Continued over page
Chapter 14 - Boom Wing - 141
Cable Drum - TriTech
ITEM NO. 16 17 18 19 20 21 22
PART NUMBER GA5011239 GA4504535 GA4504530 GA4572495 GA5010991 GA5011269 GA4524690
DESCRIPTION Bolt, M12 x 50, ZP GR 8.8 Boom weight, Cable drum disc, 0.806 kg Boom weight, Cable drum disc, 1.792 kg Bolt 1" UNF 12 TPI Boom drum stopper Nut 1" UNF 12 tpi ZP Bolt M16 x 100 ZP GR8.8 Wear plate Upper boom top MY13 SS
Cable Drum - TriTech
Part No
Description
GA4659580
Cable drum, Boom hinge, Right side,TriTech, MY13
GA4659585
Cable drum, Boom hinge, Left side,TriTech, MY13
GA4659600 Boom drum hinge OFFSE T 24+ RH MY13
GA4659605 Boom drum hinge OFFSET 24+ LH MY13
Cable Drum Top Pivot - TriTech
QTY. 10 1 1 1 1 1 1
Qty
1
1
1
1
ITEM NO. 1
2
3 4 5
GA4932342 Upper pivot assembly
PART NUMBER GA4656190
GA5015659
DB-ADJ-13 GA5010573 GA5012203
DESCRIPTION
QTY.
Boom hinge bearing Mount 24+
1
Bearing, Spherical bush, 34.925 ID x 55.663 OD x 30.150mm thick, GEZ34ES2RS
Bush, Stepped, 25.5 ID x 40 OD x 69.75mm long
1
2
Circlip, Internal, 59 OD unsprung, Suit 55mm bore
1
Grease nipple, Shor t, 1/4" UNF
1
142 - Special Evolution MY13 Parts Manual - Rev 2
Cable Drum Lower Pivot - TriTech
GA4932343 Lower pivot assembly
ITEM NO. 1
2
3 4 5
PART NUMBER GA4656190
GA5015659
DB-ADJ-02 GA5010573 GA5012203
DESCRIPTION
QTY.
Boom hinge bearing Mount 24+
1
Bearing, Spherical bush, 34.925 ID x 55.663 OD x 30.150mm thick, GEZ34ES2RS
1
Bush, Short, 40 OD x 25.5 ID x 23.75mm long
2
Circlip, Internal, 59 OD unsprung, Suit 55mm bore
Grease nipple, Short, 1/4" UNF
1
1
Chapter 14 - Boom Wing - 143
d ram adjuster nut mounting 1
Nut 1" x 12 TPI ZP UNF
4
Washer 1" Flat HD ZP
15
Nut nyloc 1" UNF
3
Bolt 1" x 6" UNF
2
1" x 4.5" UNF Bolt
1
nbuckle FRG COMM GAL E/E 22mm with nut
1
13mm Bow ShaBcokleom Fold2 Adjuster - TriTech
Chain link 11mm
4
Circlip external 25mm
2
oom fold adjuster HD MY13
1
6m Cable Spring Mounting MY13
1
2 3
10
11
6 4
9
4
1
74 12 5 5
9 8 13
STANDARD 5xGA5017659 (1" WASHER) ABOVE RAM 2xGA5017659 (1" WASHER) BELOW RAM
CHANGES AS PER BOOM SIZE
ITEM NO. 1 2 3 4 5 6 7
38 9 10 11 12 13
-
PART NUMBER 24mk4DB005 24mk4DB006 GA5010991 GA5017659 GA5012445 GA5006043 GA5006039 GA5017061 4 GA5000669 GA5065020 GA5008519 GA5070775 GA4905665 GA4535360 GA4535355 GA4535285
DESCRIPTION
Adjuster plate, Fold ram,TriTech boom
Bush / pin, Fold ram adjuster nut and bolt retainer
Nut 1" UNF 12 tpi ZP
Washer, 1", Flat, ZP, Heavy duty (5mm thick)
Nut 1" UNF 14 tpi Nyloc ZP
DATE CREATED:
Bolt
1"
UNF
x
6"
x
1UD4NIMTLEEPSNSISIOZOTNPHSEGRAWRREIS8IENSMPEILCLIIFMIEEDTERS
17/02/2011
DRAWN:
DEBUR ALL EDGES
Luke M
Bolt 1" UNF x 4 1/2" ZP DATE EDITED: GR8
MATERIAL:
1/08/2012
Turnbuckle, Eye endsM, aMtt22 thread & lock nut, Galvanised DO NOT SCALE DRAWING
Bow shackle, 13mm, Galvanised
Chain 11mm Long link grade 100 rated 3 tonne
Circlip, External, 25mm
Boom fold adjuster eyelet bolt, HD MY13
Cable Spring Mount 36m MY13
Shim, 5mm, Delta boom rose joint
Shim, 3mm, Delta boom rose joint
Shim, 1mm, Lower rose end, Delta boom
QRETVYN. O 2 1
CHANGE
GOLDA
4 TITLE: 15
3
DWG NO.
Ev2o 2013 boom fold adju
1
1SCALE:1:15
2
4
2
1
1
*
*
*
144 - Special Evolution MY13 Parts Manual - Rev 2
Boom Cables - TriTech
ITEM NO. PART NUMBER
DESCRIPTION
QTY.
GA5000073
Cable - Lengths:
2
TriTech 24-30mt - 12450mm
TriTech 24-30mt Bi Fold- 10420mm
TriTech 36mt - 15370mm
GA5000215
TriTech 36mt Bi Fold - 13360mm Cable End Eyelet
GA5005391
Cable Ferrule
Boom Cable Spring - Suit 24m TriTech
4
4
GA4903057 Twin spring assembly
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA4656230
Mount, Boom cable spring, Suit 24 - 33 meter TriTech boom
1
2
F70057A
3 spring mounting plate suit delta boom
2
Spring, tension, 70 OD x 329 long x 12mm, large, suit delta boom
3
GA5010793
2
yaw / cable
4
GA5001009
Washer 16mm Flat ZP Heavy Duty
4
5
GA5000939
Bolt M16 x 60 Black GR8.8
2
6
GA5001029
Nut M16 Nyloc ZP
2
Chapter 14 - Boom Wing - 145
Boom Cable Spring - Suit 28-30m TriTech
Inner Steel Wings
Part Number
Description
GA4903067GA465T6r7ip8l0e cable sp2r8in-3g0aMsseBmoboBlimy-FoinldneRrH
ITEM NO. GAP4A6R56T7N85UMBER
1
GA4656230
2D8E-3S0CMRIBPoToIOmNinner Mount, BooBim-FocldabLleH spring, Suit 24 - 33 meter TriTech boom
2 GAF476050657790A
363MsprBiongommBoini-unFneotrlidngRHplate suit delta boom
QTY. 1 2
3
GAG4A6556071905793
36SMprinBgo,otemnsinionne,r70 OD x 329 long x 12mm, large, suit delta boom yaw / cableBi-Fold LH
3
4 GAG4A6559020610009
Wash4e2rM16Bmoomm FInlanteZr RPHHeavy Duty
4
5
GA5000939 Bolt M16 x 60 Black GR8.8
2
6 GAG4A6559020615029
Nut M4126M BNoyolomcInZnPer LH
2
Steel Inner Wings - TriTech
Part Number Description
GA4656780 24-30M Boom inner Bi-Fold RH
GA4656785 24-30M Boom inner Bi-Fold LH
GA4656790 36M Boom inner Bi-Fold RH
GA4656795 36M Boom inner Bi-Fold LH
146 - Special Evolution MY13 Parts Manual - Rev 2
Aluminium Outer Wings - TriTech
X
Part Number GA4656054 GA4656051 GA4656061 GA4656066 GA4656071 GA4656076 GA4659280 GA4659285
Outer Aluminium Wings Description
24m Outer boom section(2239mm Long) 24m Outer boom section(3749mm Long) 28m Outer boom section(4264mm Long) 30m Outer boom section(5265mm Long) 33m Outer boom section(5764mm Long) 36m Outer boom section(6805mm Long) 42m Outer Boom Inner Section (6252mm Long) 42mOuter Boom Outer Section (2053mm Long)
Part Number Description
1
G2 A4656054 24m3 Outer boom section4 (2239mm Long) 5
6
7
8
GA4656051 24m Outer boom section(3749mm Long)
GA4656061 28m Outer boom section(4264mm Long)
GA4656066 30m Outer boom section(5265mm Long)
GA4656071 33m Outer boom section(5764mm Long)
Aluminium Break Away Tip
X
Part Number GA4656122 GA4656120 GA4656121
Description Boom breakaway end - 1750mm Boom breakaway end - 2000mm Boom breakaway end - 2500mm
REV NO CHANGE
DATE
1-3 MO
Continued
over
pGageOLDACRES
MITCH PH: 03 FAX: 0
TITLE:
Boom breakaway end in Aluminium 2m
Chapter 14 - Boom Wing - 147 DATE CREATED:
UNLESS OTHERWISE SPECIFIED 17/09/2003
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
A. McAndrew
DWG NO.
GA4656120
DATE EDITED:
MATERIAL:
5/12/2011
1
2
3
4
Luke
DO NOT SCALE DRAWING
SCALE:1:20
SHEET 1 OF 1
GA5011251
GA5000587 GA5012461
M12 x 52mm x 80mm Square Top U Bolt
2
M12 WASHER
4
M12 Nyloc nut Z/P
4
Boom Protector Assembly - Outer - TriTech
254
6
7 8 1 3
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA5004437
Washer 6mm Flat SS
2
GA5004107
Bolt M6 x 70 ZP GR8.8
3
GA5048115
Nut M6 Nyloc ZP
4
GA4656277
Support bracket, Folded boom wing,TriTech
REV NO
TITLE:
4
2 CHANGE
DATE E 1-3 MORA
GOLDACRES 2
MITCHELL PH: 03 534
FAX: 03 53
1
5
F70294A
Boom wing protector Suit 50 x 50, 200mm long (2mm SS)
1
DATE CREATED:
6
GA5011251
U Bolt M12 x 52mm x 80mm Square Top UNLESS OTHERWISE SPECIFIED 22/02/2010
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DWG NO.
2 Bump Stop Extension Assem
DATE EDITED:
MATERIAL:
1
27
GA500053 87
Washer 124 mm
Flat
ZP
Heavy Duty 31/07/2012 Matt
DO NOT SCALE DRAWING
4
SCALE:1:10
SHEET 1 OF 1
8 1 GA50124612
Nut M123 Nyloc ZP 4
5
ITEM NO.
6
PART NUMBER
BAoom
Protector
Assembly
-
Inner
- TriTech 1
F70799A
2
GA4505005
3
GA5004437
4
GA5004107
5
GA5048115
47
DESCRIPTION
8
QTY.
Al Outer Wing Protector suit 50 x 50 600mm long (2mm S/S)
1
A
Boom Slide Protector SS 2013
1
M6 SS Washer
10
M6 x 70mm bolt
5
Nut nyloc M6
5
4
B
B
1
3
5
C
C
D
D
E
ITEM NO. PART NUMBER
1
F70799A
2
GA4505005
3 F
GA5004437
4
GA5004107
1
2
5
GA5048115
3 4
5 2
DESCRIPTION
Protector, Outer wing, Suit 50 x 50 RHS, 600 long, 2mm SS
Boom Slide Protector SS with cutout 2013
Washer 6mm Flat SS
Bolt M6 x 70 ZP GR8.8
3
4
Nut M6 Nyloc ZP
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 31/07/2012
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Name
DATE EDITED:
MATERIAL:
31/07/2012
Matt
DO NOT SCALE DRAWING
REV NO TITLE:
QTY.
CHANGE
DATE ECN NO.
G1OLDACRES 1-3 MORANG CR MITCHELL PARK 3352 PH: 03 53426399 FAX: 03 53426308 1
10
DWG NO.
5 Boom Protector - inner EVO 2013
A3
SCALE:1:7.5
5
SHEET 1 OF 1
148 - Special Evolution MY13 Parts Manual - Rev 2
RIPTION Protector (RH)
Default/ QTY. 1
yloc Nut
4
r rubber (black)
1
Washer
4
yloc M6
2
0mm bolt
2
p stop extension acket 8mm SS HD
Fe16nce Line End Protector - Standard
5 Bolt SS
7
loc S/S 316
3
ZP Washer
8
9 11 11 2
6445
7
A
B
9 8 8 10 Mounts on inner wing
C
3
D
1
GA4901385 Boom end protector kit per pair
ITEM NGBoOAlt.4k9iP0tA1to3R8Ts5u-Nibt GoUlAtMk4iBt9E0R1385DaEsSsCeRmIPbTlyION
GA4656314
Boom end protector, Right Hand
1
GA4656315
Boom end protector, Left Hand
REV NO
TITLE:
CHANGE
DATE ECN NO.
1-3QMTOYRA. NG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399
1 FAX: 03 53426308
2
GA5004917
Nut M8 Nyloc ZP
4
3
GA5006225
Boom stopper, Rubber, 143mm bumper, Suits 50 x 50mm RHS DATE CREATED:
UNLESS OTHERWISE SPECIFIED 13/10/2009 DIMENSIONS ARE IN MILLIMETERS DRAWN: DEBUR ALL EDGES
DWG NO.
Boom Protector assembly
1
A3
GA5006226
Boom DATEEDITED: stopper, RubbMeATErRI,AL:210mm bumper, Suits 50 x 50mm RHS
19/11/2012
3
4 4 GA5004437
Washer 6mm Flat SS Matt
DO NOT SCALE DRAWING
SCALE:1:10
SHEET 1 OF 1
4
5
GA5048115
Nut M6 Nyloc ZP
2
6
GA5004107
Bolt M6 x 70 ZP GR8.8
2
7
GA4522995
Extension bracket Rubber bump stop
1
8
GA5048115
Nut M6 Nyloc ZP
6
9
GA5052600
Bolt M8 x 75 SS
7
10 GA5052590
Nut M8 Nyloc SS
3
11 GA5003643
Washer 8mm Flat SS Heavy Duty
8
Chapter 14 - Boom Wing - 149
DESCRIPTION
Default/ QTY.
m End Protector easy fit My13
1
M8 Nyloc Nut
3
stopper rubber (black)
1
M6 SS Washer
4
Nut nyloc M6
2
M6 x 70mm bolt
2
Fence er bump stop extension bracket
1
Washer 8mm SS HD
12
Line
End
Protector
-
Quick
Fit
M8x75 Bolt SS
6
M8 Nyloc S/S 316
3
9882
5446 7
A
B
9 8 8 10 Mounts on inner wing
C
3
D
1
er pair assembly
3
ITEM NO. PART NUMBER
GA4656316 1
GA4656317
2
GA5004917
G4 A5006225 3
GA5006226
4
GA5004437
5
GA5048115
6
GA5004107
7
GA4522995
8
GA5003643
9
GA5052600
10 GA5052590
REV NO CHANGE
DATE ECN NO.
DESCRIPTION
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399
TITLE:
FAX: 0Q3 5T34Y26. 308
Boom End Protector easy fit Right Hand
Boom End Protector easy fit Left Hand UNLESS OTHERWISE SPECIFIED
DATE CREATED:
13/10/2009
DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
Nut M8 Nyloc ZP DEBUR ALL EDGES DATE EDITED:
MATERIAL:
Boom Protector assembly quick fit
31/07/2012
BMoattom stopper, Rubber, 143mm DO NOT SCALE DRAWING bumpeSrC,ASLE:u1:10its 50 x 50mm RHS SHEET 1 OF 1
Boom stopper, Rubber, 210mm bumper, Suits 50 x 50mm RHS
1
A3
3
1
Washer 6mm Flat SS
4
Nut M6 Nyloc ZP
2
Bolt M6 x 70 ZP GR8.8
2
Extension bracket Rubber bump stop
1
Washer 8mm Flat SS Heavy Duty
12
Bolt M8 x 75 SS
6
Nut M8 Nyloc SS
3
150 - Special Evolution MY13 Parts Manual - Rev 2
A
A
18 15
10
1
2
3
4
5
6
7
8
11 1
A
A
Three Dimensional Breakaway
B B
B
8
16
B
7
20
C
C
C
11 2
1C 25 13
D
3
E
F
D
D
5
6
7
8
D
11
E
18 15
10 21
14
27 23 10
26 24 8
11 12 5
9
6
22
A
29 3
14
REV NO CHANGE
DATE ECN NO.
1-3 MORANG CR
GOLDACRES 24 MITCHELL PARK 3352 PH: 03 53426399
7
FAX: 03 53426308
TITLE:
7
8
Breakaway hinge 2006 complete
F
E
1
2
8
16 7
25 24 11
F 1
2
11 2
1
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 27/02/2006 DIMENSIONS ARE IN MILLIMETERS DRAWN: DEBUR ALL EDGES
DWG NO.
breakaway mk3 - Parts manual assembly - 2011 A3
DATE EDITED:
MATERIAL:
3
4
11/04/2012 Matt
DO NOT SCALE DRAWING
SCALE:1:7.5
11
SHEET 2 OF 2
17
18
15
10 21 B
10
9
11 12
19 20
3
1
8
225
13
30
3
16
7
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 27/02/2006 DIMENSIONS ARE IN MILLIMETERS DRAWN: DEBUR ALL EDGES
4
17
DATE EDITED:
11/04/2012 Matt
MATERIAL:
DA
UDNIMLEESNSSIOODTONHNSEORAT WSRCEIASLIEENDSRMPAEWILCINLIIGFMIEEDTERS
2
DR
DEBUR ALL EDGES
C
DATE EDITED:
11/04/2012
M
4
Matt
D
19 20
25 48
6
11 2
25 1
25
D
29 3
14 24 7
6 5
13
30 25 4
8 6
GA4902061 Three Dimensional Breakaway
25
REV NO
TITLE:
29 3
CHANGE
14 DATE CEChNapNtOer. 14 - Boom Wing - 151
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352
24 PFAHX: 70: 3035354324623693908
5
6
Three Dimensional Breakaway
ITEM NO PART NUMBER DESCRIPTION
1
GA4552070 Crush Tube, 16.2 ID, 20.5 OD, 9.5mm long
2
GA5000949 Bolt M16 x 70 ZP GR8.8
3
GA5001029 Nut M16 Nyloc ZP
4
GA4902060-3 Rod end assembly, Breakaway MK3
5
GA5011183 SHCS M10 x 45 GR 12.9
6
GA4552080 Crush tube, 10.2 ID x 15 OD x 5mm long
7
GA4552075 Crush tube, 10.2 ID x 15 OD x 15mm long
8
GA5000141 Nut M10 Nyloc ZP
9
GA5008545 Eye bolt, Bolt M12 x 100, Eye 63mm x 18mm
10 GA5000587 Washer 12mm Flat ZP Heavy Duty
11 GA5012461 Nut M12 Nyloc ZP
12 GA5016605 Spring, tension, 51.5 OD x 260 Long x 8mm, Breakaway
13 GA5011489 Bolt M8 x 60 ZP GR8.8
14 GA5004917 Nut M8 Nyloc ZP
15 -
Boom breakaway locking mechanism
16 GA4532565 Plate, Breakaway spring, MK3
17 GA5006141 SHCS M10 x 40 ZP GR12.9
18 GA5011251 U Bolt M12 x 52mm x 80mm Square Top
19 GA4532590 Plate, Breakaway turnbuckle, MK3
20 GA5066930 Turnbuckle, female clevis, stainless steel, M8
21 GA5000559 Nut M12 Hex ZP
22 GA5014469 Rod end, Ball 16 ID, M16 female thread
23 GA5000931 Bolt M16 x 50 ZP GR8.8
24 GA4502105 Bracket, Lower hinge, Breakaway MK3
25 GA5000311 Set screw, M12 x 35, ZP GR 8.8
26 GA4522485 Plate, Rose end locking, Breakaway Mk3
27 GA5004717 SHCS M8 x 30 ZP
28 GA5004883 Washer 8mm Flat ZP Heavy Duty
29 GA4502095 Bracket, Rod end clevis, Breakaway MK3
30 GA4502100 Bracket,Turnbuckle clevis, Breakaway MK3
QTY 2 1 1 1 2 2 2 3 1 6 13 1 1 2 1 1 1 2 1 1 1 1 1 2 8 1 1 1 1 1
152 - Special Evolution MY13 Parts Manual - Rev 2
Boom Line Plumbing
ITEM NO PART NUMBER
DESCRIPTION
1 GA5018273
Boom line, Poly, 3/4", 1600 long, No holes
GA5018275
Boom line, Poly, 3/4", 2100 long, No holes
GA5018279
Boom line, Poly, 3/4", 2600 long, No holes
GA5018281
Boom line, Poly, 3/4", 3100 long, No holes
2 QJ17560A-3/4-NYB Nozzle body, Single, 3/4",Teejet
3 HBF075
Hose barb, Straight, 3/4" female x 3/4" hose, Banjo
4 400278
Adapter, Boom flush, 3/4" female quick fitting
5 19843-NYR
Nozzle shut off cap & washer, 19843-NYR,Teejet
6 GA5052595
Bolt, M8 x 20, SS
7 GA5070710
Nut with flange, Plastic, M8 x 1.25
GA5004917
Nut M8 Nyloc ZP
8 GA5018315
Valve, Ball, 20mm male & female thread, Black Butterfly handle
9 HBF075-90
Hose barb, Elbow, 90 degree, 3/4" female thread x 3/4" hose
* Quantities will vary depending on boom size and number of sections.
QTY * * * * * * * * * * * *
Continued over page
Chapter 14 - Boom Wing - 153
Manual Fence Line Nozzle
ITEM NO. 1 2 3 4 5
PART NUMBER 58140-NYB
QJ4676-90-1/4-NYR
CP19438-EPR B1/4XP10L B1/4XP10R CP38936-NYB
DESCRIPTION Chemsaver, Manual shutoff, Maximum 150psi pressure,Teejet Nozzle cap & washer, 90 degree cap, 1/4" NPT female outlet, Teejet Seat washer, Rubber Nozzle, Fence line, Orange, Polymer, Left side, 1/4" BSPT,Teejet Nozzle, Fence line, Orange, Polymer, Right side, 1/4" BSPT,Teejet Hose barb suit nozzle body, Single 1/2", Nylon,Teejet
QTY. 1
1
1 1 1 1
154 - Special Evolution MY13 Parts Manual - Rev 2
Solenoid Operated Fence Line Nozzle
ITEM NO. PART NUMBER
1
58140-NYB
2
CP38936-NYB
3
ECS17560A-3/4-NYB
4
CP19438-EPR
5
QJ4676-90-1/4-NYR
B1/4XP10L 6
B1/4XP10R
DESCRIPTION Chemsaver, Manual shutoff, Maximum 150psi pressure,Teejet Hose barb suit nozzle body, Single 1/2", Nylon,Teejet Nozzle body, Solenoid fence line, Electric shut off, 3/4,"Teejet Seat washer, Rubber Nozzle cap & washer, 90 degree cap, 1/4" NPT female outlet, Teejet Nozzle, Fence line, Orange, Polymer, Left side, 1/4" BSPT, Teejet Nozzle, Fence line, Orange, Polymer, Right side, 1/4" BSPT, Teejet
QTY. 1 1 1 1 1
1
1
Chapter 14 - Boom Wing - 155
Adjustable Nozzle Brackets
Note:
Use when extension required: GA5052595 M8x20 SS bolt GA5004917 M8 nyloc nut
GA5003645 5/16" x 1 1/4" washer
ITEM NO PART NUMBER DESCRIPTION
QTY
1
GA5018259 Nozzle bracket, plastic, U shape
1
GA5018257 Nozzle bracket, plastic, L shape, short
2
1
GA5018258 Nozzle bracket, plastic, L shape, long
3
GA5066965 Spacer, square, plastic, 21 x 24 x 50mm, suits nozzle brackets
1
4
GA5018255 Bracket, Nozzle extension, Plastic
1
5
GA5004741 Bolt M8 x 75 ZP GR8.8
1
6
GA5004917 Nut M8 Nyloc ZP
1
7
GA5003645 Washer, 5/16" ID x 1 1/4" OD, Flat SS
2
Pre Packaged Kits
ITEM NO PART NO
1
GA4948675
2
GA4948695
3
GA4948685
DESCRIPTION Nozzle bracket kit, Single line, Suit 50mm RHS Nozzle bracket kit, Single line with extension, Suit 50mm RHS Nozzle bracket kit, Dual line, Suit 50mm RHS
156 - Special Evolution MY13 Parts Manual - Rev 2
3
GA2000511 Boom line, Poly, 3/4, 600 long, 3 holes, 250mm spacing
1
B
600mm Boom Poly
1
C
2
1
2
3
4
5
6
ITEM NO. PART NUMBER DESCRIPTION
QTY.
A
1
GA5018269 3 Boom line, Poly, 3/4, 1100 long
1
2
GA2000506
Boom line, Poly, 3/4, 1100 long, 3 holes, 500mm spacing
1
D
3
GA2000507
Boom line, Poly, 3/4, 1100 long, 5 holes, 250mm spacing
1
ITEM NO PART NUMBER DESCRIPTION
1 GA5018287
Boom line, Poly, 3/4", 600 long, No holes
2 GA2000510
Boom line, Poly, 3/4", 600 long, 2 holes, 500mm spacing
B
3 GA2000511
Boom line, Poly, 3/4", 600 long, 3 holes, 250mm spacing
7
8
A
QTY
1
1
1
B
E
F
REV NO
1100mm Boom Poly
C
1
1-3 MORANG CR
GOLDACRES MITCCHELL PARK 33 PH: 03 53426399 FAX: 03 53426308
TITLE:
600mm Boom Poly Config
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE UNTOL. DIMENSIONS
Material:
2
CHANGE
NAME/DATE ECN NO.
IN MILLIMETRES
THIS DRAWING REMAINS THE PROPERTY OF GOLDACRES TRADING PTY LTD AND IS SUBJECT OF COPYRIGHT
OPEN DIM ONE DEC. PL. TWO DEC. PL. ANGULAR
± 0.20 ± 0.10 ± 0.05 ± 0.50°
Surface Finish: -
DRG. STANDARD
1 D
3
2
3
4
DEBUR ALL EDGES
/PRACTICE AS 1100
1
2
3
4
5
ITEM NO. PART NUMBER DESCRIPTION
QTY.
A
1 ITEMGA5N018O271 BPoAomRlTine,NPoUly, M3/4B, 1E20R0 longD, NEo ShoClesRIPTION
1
2
GA2000515 Boom line, Poly, 3/4, 1200 long, 3 holes plus fenceline, 500mm spacing
1
1
GA5018269 Boom line, Poly, 3/4", 1100 long, No holes
Drawn By: Name Drawing Checked:
Approved DATE EDITED: David
17/04/2015 DWG NO.
-
600mm Boom line, Poly configs
REV
00
A
-
SHEET 1 OF
22/04/2015 SCALE:1:3
DO NOT SCALE DRAWING
FINISHED WEIGHT: Kg D
6
7
8
QTY
A
1
2
GA2000506 Boom line, Poly, 3/4", 1100 long, 3 holes, 500mm spacing
1
E
3
GA2000507 Boom line, Poly, 3/4", 1100 long, 5 holes, 250mm spacing
1
B
1200mm Boom Poly
F
C REV NO 1 1
CHANGE
2
NAME/DATE
ECN NO.
3
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETRES
THIS DRAWING REMAINS THE PROPERTY OF GOLDACRES TRADING PTY LTD AND IS SUBJECT OF COPYRIGHT
4
UNTOL. DIMENSIONS
OPEN DIM
± 0.20
ONE DEC. PL. ± 0.10
TWO DEC. PL. ± 0.05
ANGULAR
± 0.50°
DEBUR ALL EDGES
Material:
Surface Finish: DRG. STANDARD /PRACTICE AS 1100
B
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399 FAX: 03 53426308 TITLE: 1100mm boom poly config
Drawn By: Name Drawing Checked:
Approved DATE EDITED: David
17/04/2015 DWG NO.
-
1100mm Boom line, Poly configs
-
REV
00
A3
C
SHEET 1 OF 1
22/04/2015 SCALE:1:3.5
DO NOT SCALE DRAWING
FINISHED WEIGHT: Kg
2
ITEM NO PART NUMBER DESCRIPTION
D
1
GA5018271
Boom line, Poly, 3/4", 1200 long, No holes
2
GA2000515
Boom line, Poly, 3/4", 1200 long, 3 holes plus fenceline, 500mm spacing
QTY
D
1
1
E
F
REV NO
1
CHANGE
2
NAME/DATE
ECN NO.
3
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETRES
THIS DRAWING REMAINS THE PROPERTY OF GOLDACRES TRADING PTY LTD AND IS SUBJECT OF COPYRIGHT
4
UNTOL. DIMENSIONS
OPEN DIM
± 0.20
ONE DEC. PL. ± 0.10
TWO DEC. PL. ± 0.05
ANGULAR
± 0.50°
DEBUR ALL EDGES
Material:
Surface Finish: DRG. STANDARD /PRACTICE AS 1100
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399 FAX: 03 53426308
TITLE:
1200mm boom poly config
Drawn By: Name Drawing Checked:
Approved DATE EDITED: David
17/04/2015 DWG NO.
-
1200mm Boom line, Poly configs
REV 00
A3
-
SHEET 1 OF 1
22/04/2015 SCALE:1:3.5
DO NOT SCALE DRAWING
FINISHED WEIGHT: Kg
Chapter 14 - Boom Wing - 157
1
2
3
4
5
6
7
8
ITEM NO. PART NUMBER DESCRIPTION
QTY.
A
1
GA5018273 Boom line, Poly, 3/4, 1600 long, No holes
1
A
2
GA2000500 Boom line, Poly, 3/4, 1600 long, 4 holes, 500mm spacing
1
3
GA2000501 Boom line, Poly, 3/4, 1600 long, 7 holes, 250mm spacing
1
4
GA2000520 Boom line, Poly, 3/4, 1600 long, 4 holes, 500mm spacing, Tee 175mm
1
5
GA2000521 Boom line, Poly, 3/4, 1600 long, 7 holes, 250mm spacing, Tee 175mm
1
B
B
1600mm Boom Poly
1
C
C
2
3
4
D
D
5
ITE1M NO PART 2NUMBER DE3 SCRIPTION 4
5
6
7
QTY8
1 GA5018273 Boom line, Poly, 3/4", 1600 long, No holes ITEM NO. PART NUMBER DESCRIPTION
1
GA5018275 Boom line, Poly, 3/4, 2100 long, No holes
QTY. 1
A
2
E
2 GA2000502 GA2000500 Boom line, Poly, 3/4, 2100 long, 5 Bhooleso, 5m00mlminspea,ciPngoly, 3/4", 16001 long, 4 holes, 500mm spacing
3
GA2000503 Boom line, Poly, 3/4, 2100 long, 9 holes, 250mm spacing
1
1
A
1
4 3 GA2000525 GA2000501 Boom line, Poly, 3/4, 1700 long, 4 Bhoolesopmlus felninceelin,eP, 5o00lmy,m3sp/a4c"in,g16001 long, 7 holes, 250mm spacing
1
5
GA2000526 Boom line, Poly, 3/4, 2100 long, 5 holes, 500mm spacing, Tee 175mm
1
6 7
4 GA2000520 Boom line, Poly, 3/4", 1600 long, 4 holes, 500mm spacing,Tee 1G7O5mLDmACRES1 GA2000527 Boom line, Poly, 3/4, 2100 long, 5 holes, 500mm spacing, Tee 925mm
1
GA2000530 Boom line, Poly, 3/4, 1700 long, 7 holes plus fenceline, 250mm spacing
1
1-3 MORANG CR MITCHELL PARK 3352 PH: 03 53426399 FAX: 03 53426308
B
8
5 GA2000531
GA2000521 Boom line, Poly, 3/4", 1600 Boom line, Poly, 3/4, 1950 long, 8 holes plus fenceline, 250mm spacing
1
long,
7
holes,
250mm
spacing,Tee 175mm TITLE: 1600mm boom poly config
1
B
9
GA2000532 Boom line, Poly, 3/4, 2100 long, 9 holes, 250mm spacing, Tee 425mm
1
F
2100mm Boom Poly 10 GA2000533
11 GA2000534 REV NO
Boom line, Poly, 3/4, 2100 long, 9 holes, 250mUNmLESSsOpTHaERcWiIINSnEMgSPIL,ELCIMTIFeEITEReDESD6IM7EN5SmIONmS ARE
Boom line, CHANGE
Poly,
3/4,
210N0AlMonE/gD,A9TEhoElCeNs,N2O5.0mTOSmHUFIBSGJDEsOCRpLATDaWOAFIcCNCGRiOnESRPgETYMRR,AAIGDTINHIeNSTGeTHPET9YP2RLOT5DPmEARNTmDY IS
1 UNTOL. DIMENSIONS
OPEN DIM
± 0.20
1 ONE DEC. PL. ± 0.10
TWO DEC. PL. ± 0.05
ANGULAR
± 0.50°
1
2
3
4
DEBUR ALL EDGES
Material:
Surface Finish: DRG. STANDARD /PRACTICE AS 1100
Drawn By: Name Drawing Checked:
Approved DATE EDITED: David
17/04/2015 DWG NO.
-
1600mm Boom line, Poly configs
REV 00
A3
-
SHEET 1 OF 1
22/04/2015 SCALE:1:4.5
DO NOT SCALE DRAWING
FINISHED WEIGHT: Kg
1
C
2
C
3
4
5
6
D
D
7
8
9
10
E
11
ITEM NO PART NUMBER DESCRIPTION 1 GA5018275 Boom line, Poly, 3/4", 2100 long, No holes
GOLDACREQS TY1-3 MORANG CR MITCHELL PARK 3352 PH: 03 53426399
FAX: 03 53426308
TITLE:
2100mm boom poly config
1
F
2
REV NO
3
1
4
GA2000502 Boom line, Poly, 3/4", 2100 long, 5 holes, 500mm spacing 1 CHANGE GA2000503 Boom line, Poly, 3/4", 2100 long, 9 holes, 250mm spacing 1 2
NAME/DATE
ECN NO.
3
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETRES
THIS DRAWING REMAINS THE PROPERTY OF GOLDACRES TRADING PTY LTD AND IS SUBJECT OF COPYRIGHT
4
UNTOL. DIMENSIONS
OPEN DIM
± 0.20
ONE DEC. PL. ± 0.10
TWO DEC. PL. ± 0.05
ANGULAR
± 0.50°
DEBUR ALL EDGES
Material:
Surface Finish: DRG. STANDARD /PRACTICE AS 1100
Drawn By: Name Drawing Checked:
Approved DATE EDITED: David
17/04/2015 DWG NO.
-
2100mm Boom line, Poly configs
REV 00
A3
-
SHEET 1 OF 1
22/04/2015 SCALE:1:6
DO NOT SCALE DRAWING
FINISHED WEIGHT: Kg
GA2000525 Boom line, Poly, 3/4", 1700 long, 4 holes plus fenceline, 500mm spacing 1
5 GA2000526 Boom line, Poly, 3/4", 2100 long, 5 holes, 500mm spacing,Tee 175mm 1
6 GA2000527 Boom line, Poly, 3/4", 2100 long, 5 holes, 500mm spacing,Tee 925mm 1
7 GA2000530 Boom line, Poly, 3/4", 1700 long, 7 holes plus fenceline, 250mm spacing 1
8 GA2000531 Boom line, Poly, 3/4", 1950 long, 8 holes plus fenceline, 250mm spacing 1
9 GA2000532 Boom line, Poly, 3/4", 2100 long, 9 holes, 250mm spacing,Tee 425mm 1
10 GA2000533 Boom line, Poly, 3/4", 2100 long, 9 holes, 250mm spacing,Tee 675mm 1
11 GA2000534 Boom line, Poly, 3/4", 2100 long, 9 holes, 250mm spacing,Tee 925mm 1
158 - Special Evolution MY13 Parts Manual - Rev 2
1
2
3
4
5
6
7
8
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA5018279
Boom line, Poly, 3/4, 2600 long, No holes
1
A
A
2
GA2000504
Boom line, Poly, 3/4, 2600 long, 6 holes, 500mm spacing
1
3
GA2000505
Boom line, Poly, 3/4, 2600 long, 11 holes, 250mm spacing
1
4
GA2000540
Boom line, Poly, 3/4, 2600 long, 6 holes, 500mm spacing, Tee 1175mm
1
5
GA2000541
Boom line, Poly, 3/4, 2350 long, 10 holes, 250mm spacing
1
6
GA2000542
Boom line, Poly, 3/4, 2600 long, 10 holes, 250mm spacing, Tee 175mm & 1925mm
1
7
GA2000543
Boom line, Poly, 3/4, 2600 long, 11 holes, 250mm spacing, Tee 175mm
1
8
GA2000544
Boom line, Poly, 3/4, 2600 long, 11 holes, 250mm spacing, Tee 675mm angled
1
B
B
9
GA2000545
Boom line, Poly, 3/4, 2600 long, 11 holes, 250mm spacing, Tee 1175mm
1
2600mm Boom Poly 10
GA2000546
Boom line, Poly, 3/4, 2600 long, 11 holes, 250mm spacing, Tee 175mm angled
1
1
C
2
C
3
4 5
6
D
7
D
8
9
10
E ITEM NO PART NUMBER DESCRIPTION
QTY
1 GA5018279 Boom line, Poly, 3/4", 2600 long, No holes
1
1-3 MORANG CR
2
GA2000504
Boom line, Poly, 3/4", 2600 long, 6 holes, 500mm spacing
GOLDACRES 1MITCHELL PARK 3352 PH: 03 53426399
FAX: 03 53426308
3
GA2000505
Boom
line,
Poly,
3/4",
2600
long,
11
holes,
250mm
spacing TITLE: 2600mm boom poly config
1
F
4
REV NO
51
GA2000540 Boom line, Poly, 3/4", 2600 long, 6 holes, 500mm spacing,Tee 1175mm 1 CHANGE GA2000541 Boom line, Poly, 3/4", 2350 long, 10 holes, 250mm spacing 1 2
NAME/DATE
ECN NO. 3
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETRES
THIS DRAWING REMAINS THE PROPERTY OF GOLDACRES TRADING PTY LTD AND IS SUBJECT OF COPYRIGHT
4
UNTOL. DIMENSIONS
OPEN DIM
± 0.20
ONE DEC. PL. ± 0.10
TWO DEC. PL. ± 0.05
ANGULAR
± 0.50°
DEBUR ALL EDGES
Material:
Surface Finish: DRG. STANDARD /PRACTICE AS 1100
Drawn By: Name Drawing Checked:
Approved DATE EDITED: David
17/04/2015 DWG NO.
-
2600mm Boom line, Poly configs
REV 00
A3
-
SHEET 1 OF 1
22/04/2015 SCALE:1:7
DO NOT SCALE DRAWING
FINISHED WEIGHT: Kg
6
GA2000542
Boom line, Poly, 3/4", 2600 long, 10 holes, 250mm spacing,Tee 175mm & 1925mm
1
1
ITEM NO.
7 PART NUMBER
DESCRG2IPTAIO2N000543
3 Boom line, Poly, 34 /4",Q2T6Y.00 long, 115 holes, 250mm s6pacing,Tee 175mm7
1
A
1 GA5018281 Boom line, Poly, 3/4, 3100 long, NBoohoolems line, Poly, 3/4", 21600 long, 11 holes, 250mm spacing,Tee 675mm
2
8 GA2000508 Boom GlineA, P2o0ly0, 30/54,431400 long, 7ahnolgelse, 5d00mm spacing
1
1
3
GA2000550
Boom line, Poly, 3/4, 2700 long, 6 holes, 500mm spacing
1
Boom line, Poly, 3/4", 2600 long, 11 holes, 250mm spacing,Tee
9 GA2000545
1
1175mm
8 A
Boom line, Poly, 3/4", 2600 long, 11 holes, 250mm spacing,Tee 175mm
10 GA2000546
1
B
angled
B
3100mm Boom Poly
C
C
1
2
3
D
ITEM NO PART NUMBER DESCRIPTION
QTY
D
1
GA5018281 Boom line, Poly, 3/4", 3100 long, No holes
1
2
GA2000508 Boom line, Poly, 3/4", 3100 long, 7 holes, 500mm spacing
1
3
GA2000550 Boom line, Poly, 3/4", 2700 long, 6 holes, 500mm spacing
1
E
F
REV NO
1
CHANGE
2
NAME/DATE
ECN NO.
3
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETRES
THIS DRAWING REMAINS THE PROPERTY OF GOLDACRES TRADING PTY LTD AND IS SUBJECT OF COPYRIGHT
4
UNTOL. DIMENSIONS
OPEN DIM
± 0.20
ONE DEC. PL. ± 0.10
TWO DEC. PL. ± 0.05
ANGULAR
± 0.50°
DEBUR ALL EDGES
Material:
Surface Finish: DRG. STANDARD /PRACTICE AS 1100
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399 FAX: 03 53426308
TITLE:
3100mm boom poly config
Drawn By: Name Drawing Checked:
Approved DATE EDITED: David
17/04/2015 DWG NO.
-
3100mm Boom line, Poly configs
REV
00
A3
-
SHEET 1 OF 1
22/04/2015 SCALE:1:7
DO NOT SCALE DRAWING
FINISHED WEIGHT: Kg
Chapter 14 - Boom Wing - 159
160 - Special Evolution MY13 Parts Manual - Rev 2
Electrics
Chapter 15
Boom LED Lights
ITEM NO. 1 2 3 4 5
PART NUMBER GA5060057 GA5060056 GA5051230 GA5003983 GA5003975
DESCRIPTION Clearance light with connector, Orange LED Clearance light with connector, Red LED CSCS M5 x 16 Countersink SS Washer 5mm Flat SS Nut M5 Nyloc SS
QTY. 1 1 4 4 4
Chapter 15 - Electrics - 161
Lights
PART NO GA5018786 GA5048975
DESCRIPTION Lamp, LED, 12V, Brake / tail light / indicator, 190 x 100mm Beacon, Rotating, Amber, DIN A pole mount, H1 globe
Electrical Components
2
3
4
5
1
6 A
B
2 3
C
ITEM PART NO
DESCRIPTION
1 GA5004477
Plug, 7 pin trailer type, Male, Plastic
2 GA5060350 3 GA5004479
Electrical harness, Adaptor, 7 pin female tr1-a3ilMeOrRpAlNuGgCtRo North American style
male trailer plug
GOLDACRES
MITCHELL PARK 3352 PH: 03 53426399
7 Pole Remote Base TITLE:
FAX: 03 53426308
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS
DATE CREATED:
22/11/2012
DEBUR ALL EDGES
DRAWN:
DATE EDITED:
Name
162
-
SpeciaAlPPELvDoATlEution
M2Y3/111/3201P2 arts
Manual MATERIAL: -
-
Rev
2
2
Matt
DO NOT SCALE DRAWING
DWG NO:
GA5004479
SCALE:1:1
SHEET 1 OF 1
A4
Raven (AMP) Electrical Connectors
ITEM 1 2 3 4 5 6
PART NO 4084001014 4084001015 4084001010 4084001016 4084001062 4084001063
DESCRIPTION Connector, 3 Pin kit, Flow Meter, Including Male Pins, Raven Connector, 3 Pin kit, Flow Meter, Including Female Pins, Raven Connector, 3 Pin Kit, Speed Sensor, including Male Pins, Raven Connector, 3 Pin kit, Speed Sensor, Including Female Pins, Raven Pin, 16-20 Gauge, Male, Suit Speed Sensor - Flow Meter, Raven Pin, 16-20 Gauge, Female, Suit Speed Sensor - Flow Meter, Raven
Chapter 15 - Electrics - 163
Raven (AMP) Electrical Connectors
ITEM 1 2 3 4 5
PART NO 4084001017 4084001018 GA5049175 GA5048905 GA5048900 GA5020785 GA5020780 GA5020560
DESCRIPTION Connector, 16 Pin AMP, Square Flange, Suit Male Pins, Raven Connector, 16 Pin AMP, Suit Female Pins, Raven Connector, Backing Shell, Suit 16 Pin AMP, Raven Pin, 14-18 Gauge Gold, Male, Suit 16 Pin AMP Pin, 14-18 Gauge Gold, Female, Suit 16 Pin AMP Connector, 37 Pin AMP, Male, Raven Connector, 37 Pin AMP, Female Connector, Backing Shell 23, Suit 37 Pin AMP, Standard size
164 - Special Evolution MY13 Parts Manual - Rev 2
Electrical Connectors
A
B
C
D
E
F
G
H
I
J
Chapter 15 - Electrics - 165
Electrical Connectors
K
L
M
ITEM NO A B C D E F G H I J K L M
PART NO GA5001351 GA5007381 GA5002211 GA5048550 GA5007385 GA5007383 GA5004009 GA5002663 GA5049000 GA5050805 GA5016619 GA5014857 GA5016617
DESCRIPTION Connector, Male, 2 Pin,Weather pack Connector, 2 pin, Female,Weather pack Connector, Male, 3 pin,Weather pack Connector, Female, 3 Pin,Weather pack Connector, Male, 4 pin,Weather pack Connector, Female, 4 pin, Flat,Weather pack Connector, Male, 6 pin,Weather pack Connector HD36-18-14SN Connector, Female, 4 pin, Square,Weather pack Connector, Male, 4 pin, Square,Weather pack Pin, Female, Sealed,Weather pack,Wire 1.0 - 2.0mm Seal, Green, Weather pack connector, Wire from 2.03 - 2.85mm Pin, Male, Sealed,Weather pack,Wire 1.0 - 2.0mm
166 - Special Evolution MY13 Parts Manual - Rev 2
Deutsch Electrical Connectors
Deutsch Part Number Breakdown
HD 34/36 - 18/24 - 14/24/47 -
PN/SN
Series 34- Jam Nut Type 36- Screw Type
Shell Size
Number of Pins
PN- Pins SN- Sockets
B
Item Part No
Description
A
A GA5061225 16GA Female Deutsch Socket
B GA5061270 12GA Female Deutsch Socket
B
Item Part No
Description
A
A GA5061240 16GA Male Deutsch Pin
B GA5061260 12GA Male Deutsch Pin
Chapter 15 - Electrics - 167
Deutsch Electrical Connectors
Item Part No
Description
A
GA5002671 HD34-18-14PN Connector
B
GA5002675 HD34-24-21PN Connector
A
B
Item Part No
Description
B
A
GA5002663 HD36-18-14SN Connector
A
B
GA5002655 HD36-24-21SN Connector
Part No GA5062635 GA5061225 GA5061260
Description HD34-24-47-PE Connector (47 Socket) Small Male Socket Large Male Socket
Part No GA5062640 GA5061210 GA5061230
Description HD36-24-47-SE-059 Connector (47 Pin) Small Female Pin Large Female Pin
Part No GA5021310
Description HD36-24-19SN-059 Connector (19 socket)
Part No GA5021315
Description HD34-24-19PN Connector (19 pin)
168 - Special Evolution MY13 Parts Manual - Rev 2
Deutsch Electrical Connectors
Part No GA5020920 GA5020910
Description Plug for size 24 Connector with External Thread on Plug Plug for size 18 Connector with External Thread on Plug
Part No GA5020925 GA5020915
Description Plug for size 24 Connector with External Thread on Connector Plug for size 18 Connector with External Thread on Connector
Item Part No
Description
B
A GA5012399 Connector Lock Nut suit 24 shell
GA5009887 Connector Lock Nut suit 18 shell
B
GA5017621 Connector Lock Washer suit 24 shell
A
GA5009893 Connector Lock Washer suit 18 shell
A
Item Part No A GA5013783 B GA5061240 C GA5050765
Description Housing (4 Pin) Pin Lock Wedge
B C
Chapter 15 - Electrics - 169
Console Mounting Kit
GA4903665 Complete console mounting kit
ITEM NO. 1 2 3 4 5 6 7 8
PART NUMBER GA5020825 GA4522930 GA4523475 GA4523935 GA5003976 GA5003983 GA5003975 GA5051230
DESCRIPTION
QTY.
RAM Mount, Universal, Adjustable kit 101U
1
Tractor controller ram mount bracket
1
Loom Support Plate Suit 440 and 4400
1
Control Box Dual Mounting Plate
1
Bolt M5 x 20 Pan Head SS
5
Washer 5mm Flat SS
8
Nut M5 Nyloc SS
8
CSCS M5 x 16 Countersink SS
3
170 - Special Evolution MY13 Parts Manual - Rev 2
schematics
3000L Plumbing
Chapter 16
Chapter 16 - Schematics - 171
3000L Plumbing with 260 pump
172 - Special Evolution MY13 Parts Manual - Rev 2
4/5000L Plumbing with 260 pump
Chapter 16 - Schematics - 173
Exacta Foam Marker Plumbing
174 - Special Evolution MY13 Parts Manual - Rev 2
Pneumatic Schematic
Chapter 16 - Schematics - 175
Hydraulic Schematic
176 - Special Evolution MY13 Parts Manual - Rev 2
Electrical Layout
Chapter 16 - Schematics - 177
178 - Special Evolution MY13 Parts Manual - Rev 2
decals
Chapter 17
1
GA5015991 R2 GA5015991 R2 GA5015991 R2 GA5015991 R2
GA208 EVO R2
FLUSH CHEMICAL FROM EQUIPMENT IMMEDIATELY AFTER USE INDUCTION EQUIPMENT WILL NOT OPERATE WITH A SYSTEM PRESSURE BELOW 80PSI
HOPPER RELEASE:
Use caution when lowering hopper
1. Support hopper. 2. Release hopper catch. 3. Gently lower hopper into working position.
NOT FOR USE WITH FLAMMABLE LIQUIDS
HOPPER MUST BE LOCKED INTO RAISED POSITION WHEN SPRAYER IS MOVING
GREASE GREASE GREASE GREASE GREASE
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GREASE GREASE GREASE GREASE GREASE
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
KEEP HANDS CLEAR KEEP HANDS CLEAR KEEP HANDS CLEAR KEEP HANDS CLEAR
GA071 R2
GA006 R2
GA207 R2
Aluminium - lighter, stronger, better chemical resistance
Spray pressure drain valve
DO NOT SUPPORT SPRAYER WITH JACK UNLESS MAIN SPRAY TANK IS EMPTY
MAXIMUM SPEED WITH TANK LOADED (20km) MAXIMUM SPEED WITH TANK EMPTY (40km)
MAXIMUM PUMP SPEED 540 RPM (To avoid pump damage) MAXIMUM PUMP SPEED 400 RPM (To avoid pulsation whilst spraying)
PTO SHAFT MAY NEED TO BE ALTERED TO SUIT INDIVIDUAL TRACTOR REQUIREMENTS
THE TARE WEIGHT OF THIS SPRAYER IS APPROXIMATELY ________________kg MAKE SURE THIS WEIGHT DOES NOT EXCEED THE TOWING CAPACITY OF THE VEHICLE TO WHICH THIS SPRAYER IS ATTACHED. MAKE SURE THE SPRAYER COMPLIES WITH ALL RELEVANT ROAD REGULATIONS FOR AGRICULTURAL MACHINERY.
DO NOT RUN PUMP DRY (To avoid pump seal damage) SET HYDRAULIC OIL FLOW ACCORDING TO TRACTOR HYDRAULIC SYSTEM (To avoid hydraulic seal damage) REFER TO OPERATORS MANUAL TO SET CORRECT HYDRAULIC OIL FLOW
GA5062430 R2
GA5062430 R2
GA006 R2
CHECK WHEEL NUTS CHECK WHEEL NUTS
GA5015971 R2
DRAIN ONLY
GREASE GREASE GREASE GREASE GREASE
GA222 R2
GA222 R2
GA222 R2
GREASE GREASE GREASE GREASE GREASE
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
KEEP ME OILED FOR SMOOTH OPERATION
17-18mm Vertical dimension to be 17-18mm
GREASE GREASE GREASE GREASE GREASE
GA222 R2
GA222 R2
GA222 R2
GREASE GREASE GREASE GREASE GREASE
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA5013 R2
STAND CLEAR
KEEP BYSTANDERS CLEAR OF BOOM OPERATING AREA
GA5015991 R2
KEEP ME OILED FOR SMOOTH OPERATION
17-18mm Vertical dimension to be 17-18mm
GREASE GREASE GREASE GREASE GREASE
GA222 R2
GA222 R2
GA222 R2
GREASE GREASE GREASE GREASE GREASE
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
STAND CLEAR
KEEP BYSTANDERS CLEAR OF BOOM OPERATING AREA
KEEP HANDS CLEAR
GA5013 R2
· NEVER WORK UNDER HYDRAULICALLY RAISED BOOM.
· CLOSE HYDRAULIC LIFTING CYLINDER TO MINIMUM HEIGHT POSITION BEFORE ATTEMPTING ANY BOOM MAINTENANCE.
· KEEP CLEAR OF OVERHEAD POWERLINES. CONTACT CAN CAUSE DEATH.
· MAKE SURE SPRAYER CAN SAFELY PASS UNDER ALL OVERHEAD OBSTRUCTIONS.
· NEVER WORK UNDER HYDRAULICALLY RAISED BOOM.
· CLOSE HYDRAULIC LIFTING CYLINDER TO MINIMUM HEIGHT POSITION BEFORE ATTEMPTING ANY BOOM MAINTENANCE.
· KEEP CLEAR OF OVERHEAD POWERLINES. CONTACT CAN CAUSE DEATH.
· MAKE SURE SPRAYER CAN SAFELY PASS UNDER ALL OVERHEAD OBSTRUCTIONS.
Main tank
Rinse nozzles
Transcal rinse
Pressure relief
Agitator
· DO NOT TRAVEL WITH THE BOOM IN THE FOLDED POSITION UNTIL THE BOOM IS LOWERED ONTO RESTS.
· BOOM MUST BE RAISED CLEAR
OF RESTS WHEN UNFOLDED
OR SERIOUS BOOM DAMAGE
MAY RESULT.
GA209 R2
· DO NOT TRAVEL WITH THE BOOM IN THE FOLDED POSITION UNTIL THE BOOM IS LOWERED ONTO RESTS.
· BOOM MUST BE RAISED CLEAR
OF RESTS WHEN UNFOLDED
OR SERIOUS BOOM DAMAGE
MAY RESULT.
GA209 R2
Fill manifold
Fresh water fill
Foam marker
fill
GA5062475 R2
Flush Water Only
GA5062485 R2
GA210 R2 GA5062095 R2
water
Foam Marker
concentrate
Bi-fold right Bi-fold right Bi-fold left
GA5015991 R2
Bi-fold left Product 1
KEEP HANDS CLEAR
Product 2
Bypass On
Note: Turn Valve off when using
chem probe or induction hopper.
Turn on when
spraying
Off
DO NOT STAND ON THIS PLATFORM OR STEPS
When the sprayer is in motion or the booms are being folded
or unfolded DO NOT ENTER TANK DO NOT CLIMB ON TANK
marker
GA5062470 R2
Vortex Induction
Pressure manifold
Hopper
Venturi
GA5062821
GA071 R2
Chemical Induction
KEEP ME OILED FOR SMOOTH OPERATION
Foa m
GA5062085 R2
KEEP ME OILED FOR SMOOTH OPERATION
GA5062995 R2
GA5062095 R2
GA5063370
GREASE GREASE GREASE GREASE GREASE
Boom over ride and speed control valve
GREASE GREASE GREASE GREASE GREASE
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GREASE GREASE GREASE GREASE GREASE
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA5063370
The nozzles supplied with this boom may not suit all chemical applications. Always ensure that the nozzles fitted match the recommended spray quality as stated on the chemical label.
The nozzles supplied with this boom may not suit all chemical applications. Always ensure that the nozzles fitted match the recommended spray quality as stated on the chemical label.
Transcal
Aluminium - lighter, stronger, better chemical resistance
GREASE GREASE GREASE GREASE GREASE
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GREASE GREASE GREASE GREASE GREASE
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA222 R2
GA5061885 EVO
GA5015991 R2
Goldacres Tri-Tech boom - Number 1 for stability
GA5061890 EVO
KEEP HANDS CLEAR GA212 EVO
Closed
Main Tank Drain Open
GA5062795
STANDARD VALVE VALVE CAL 2123
FULL FLOW TO BOOM
FULL BYPASS
Chapter 17 - Decals - 179
2
3
4
6
8 9
5 7
10
ITEM NO. 1 2 3 4 5 6 7 8 9 10
PART NUMBER GA208EVO GA5015991 GA222EVO GA5015971EVO GA207EVO GA5062430EVO GA5061900EVO GA5013EVO GA209
DESCRIPTION Special Evolution Sticker Kit Hopper warnings Keep hands clear Grease point Drain only General sprayer warnings 3D breakaway adjustment & lubrication Spray pressure drain valve Danger - stand clear of boom Danger/Caution - Boom
180 - Special Evolution MY13 Parts Manual - Rev 2
QTY. 1 1 8 57 1 1 2 2 2 2
11
12
13
14
15
17 16
ITEM NO. 11 12 13 14 15 16 17
PART NUMBER GA5062821 GA071 GA5062475 GA5062485 GA5062995 GA5062470
DESCRIPTION Spray pod decal Aluminium wing Flush water only Main spray pressure Foam marker concentrate Bypass valve Foam marker water
QTY. 1 2 1 1 1 1 1
Chapter 17 - Decals - 181
18
19
20
21
22
23
24 25
ITEM NO. 18 19 20 21 22 23 24 25
PART NUMBER GA210 GA5063370 GA212EVO GA5061890EVO
DESCRIPTION Warning - tank & platform Warning - nozzle suitability Keep me oiled Control Valve Main tank drain Valve cal TriTech boom stability Goldacres - Austrlias world class sprayers
182 - Special Evolution MY13 Parts Manual - Rev 2
QTY. 1 2 2 1 1 1 1 1
26 27 28
29
ITEM NO. 26 27 28
29
PART NUMBER GA5062095 GA5062085 GA5064735 GA5065130 GA5064920 GA5064730 GA5064910 GA5064925 GA5064970 GA5065125 GA5064755
DESCRIPTION Chemical induction Votex induction Transcal Tank decal 3018 Tank decal 3020 Tank decal 3021 Tank decal 3024 Tank decal 4024 Tank decal 4030 Tank decal 5024 Tank decal 5028 Tank decal 5030
QTY. 1 1 1
2
Chapter 17 - Decals - 183
184 - Special Evolution MY13 Parts Manual - Rev 2
hydraulics
Chapter 18
Boom Lower Solenoid
ITEM NO. PART NUMBER
1
GA5047344
2
S75-0806
3
GA5004437
4
GA5004447
5
GA5004081
6
GA5017393
7
S27-0808
DESCRIPTION Hydraulic Solenoid Boom Lower Limit Cartridge and Body Hydraulic adaptor, Nipple, 1/2" BSP male x 3/8" BSP male with o-ring Washer 6mm Flat SS Washer, 6mm, Spring, SS Bolt M6 x 40 ZP GR8.8 Valve speed control 1/2" offset Hydraulic adapter, Nipple, 1/2" BSP male x 1/2" BSP male
QTY. 1
2
4 2 2 1 1
Chapter 18 - Hydraulics - 185
Load Sense Turbo Valve
GA4902590 Complete Assembly
ITEM NO.
PART NUMBER GA5047677 R81-08M R81-08P
S75-0408
S50-080808 T202-0808 T202-0404
S75-0808
S77-0404
S24-0804
868AA012000WOORL GA5049695
DESCRIPTION Load sense turbo valve Quick connect fitting, 1/2" male tip x 1/2" female thread 08 BSPPF FQRC/Poppet/Psh.Pll Hydraulic adaptor, Nipple, 1/4" BSPT male x 1/2" BSPP o-ring male Hydraulic adaptor,Tee, 1/2" BSPT male x 1/2" BSPT male x 1/2" BSPT male Hydraulic coupling, 1/2" hose x 1/2" BSP female swivel Hydraulic coupling, Straight, 1/4" BSP female thread x 1/4" hose crimp Hydraulic adaptor, Nipple, 1/2" BSPT male x 1/2" BSPP male with o-ring Hydraulic adapter, Elbow, 90 degree, 1/4" BSPT male x 1/4" BSPT male o-ring Hydraulic adaptor, Reducing bush, 1/2" BSPT male x 1/4" BSPT female Hydraulic hose, 1/2", Flexor R2AT08 Hose, Hydraulic, 1/4", 2 wire, Black
QTY. 1 2 2 2
1 2 2
1
1
1 1 1
186 - Special Evolution MY13 Parts Manual - Rev 2
Quick Release Couplings
1/2" Hydraulic Lines
ITEM PART NO DESCRIPTION
1
R81-08M
Quick connect fitting, 1/2" male tip x 1/2" female thread
1/4" Hydraulic Lines
ITEM PART NO DESCRIPTION
1
R81-08M
Quick connect fitting, 1/2" male tip x 1/2" female thread
2
S27-0804
Hydraulic adaptor, Nipple, 1/2" BSP x 1/4" BSP
Hydraulic Pump Lines
ITEM PART NO DESCRIPTION
1
R81-08M
Quick connect fitting, 1/2" male tip x 1/2" female thread
2 36B-08 Ring Retaining BSPP 1/2"
3 RO-BP08 1/2" Hydraulic O-Ring
4 35B-08 1/2" BSPP Lock Nut
Note: Plastic Cover for when fittings are not in use is available Part No: GA5052365
Hydraulic Hoses
PART NO GA5067925 GA5067930 GA5067940 GA5067945
DESCRIPTION 1/4" Hydraulic Hose,Tractor to fold cylinders 1/2" Hydraulic Hose,Tractor to Boom Lower Solenoid 1/2" Hydraulic Hose, Accumulator manifold to lift cylinders 1/4" Hydraulic Hose,Tractor to tilt cylinders
Chapter 18 - Hydraulics - 187
Hose ID Tags
PART NO F71023A F71024A F71025A F70134A F70135A F71018A F71019A F71020A F71021A F71022A F71026A
DESCRIPTION ID Tag for Fold In ID Tag for Fold Out ID Tag for Boom Raise/Lower ID Tag for Left Hand Tilt ID Tag for Right Hand Tilt ID Tag for BiFold In ID Tag for BiFold Out ID Tag for Pressure ID Tag for Tank ID Tag for Load Sense ID Tag for Brakes
Hydraulic O-Rings and Retaining Washers
ITEM 1
2
PART NO 36B-04 36B-06 36B-08 36B-12 RO-BP04 RO-BP06 RO-BP08 RO-BP12
DESCRIPTION Ring Retaining 1/4" BSPP Ring Retaining BSPP 3/8" Ring Retaining BSPP 1/2" Retaining Ring BSPP 3/4" O-Ring BSPP 1/4" O-Ring 3/8" BSPP O-Ring BSPP 1/2" O-Ring BSPP 3/4"
188 - Special Evolution MY13 Parts Manual - Rev 2
1
2
3
4
5
6
7
8
ITEM NO.
PART NUMBER
DESCRIPTION
A
1
GA5018555
HYDRAULIC CYLINDER 2.5 bore 18 stroke
2
L068A
Restrictor Nipple 1/4 BSPT to 3/4 UNO 1.5mm orifice
3
RO-BP08
1/2" BSPP O-Ring
4
S93-0412
Delta Hydraulic Cylinder - Fold RH
Hydraulic adaptor, Nipple, 1/4" BSP male x 3/4" UNO male with o ring
B
4
1
3
C
2
D
1E
ITE2 M NO. PART NUM3 BER DESCRIPTIO4 N
5
6
.
PART NUMBER
GA5018557
L068A
1
DGESAC5R0IP1TI8O5N55
HydQraTuY.lic cylinder SLPSP (TLD) 2.5" x 18" Stroke
HYDRAULIC CYLINDER
2
L0s6tr8oAke
2.75
bore
18Reduc1ing
restrictor
nipple,
3/4"
UNO
x
1/4"
BSPT,
1.5mm
orifice
Restrictor Nipple 1/4 BSPT
3 UNOR1O.5-mBmP0o8rifice
to
3/4
O-Rin1g
BSPP
1/2"
RO-BP08 S93-0412
F
1
1/2" BSPP O-Ring
Hydra1ulic adaptor, Nipple, 1/4" BSP male x 3/4" UNO male with
Hmy4darlaeuxlic3/a4d"SUa9Np3Ot-o0rm,4Na1ilpe2pwleit,h1/o4r"inBgSPo-ring1
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 1/11/2013 DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Name
Delta Hydraulic Cylinder - Fold LH DATEEDITED:
1/11/2013
2
3
4
Matt
MATERIAL:
DO NOT SCALE DRAWING
Q7 TY.
8
1
1 REV NO CHANGE
DATE 1-3 MOR
GOLDACRES MITCHEL
1
PH: 03 53 FAX: 03 5
TITLE:
1
DWG NO.
Fold cylinder - RH - Special MY13 parts manu
SCALE:1:2.5
SHEET 1 OF 1
4
1
3 2
ITEM NO. PART NUMBER 1 GA5018557 2 L068A 3 RO-BP08 4 S93-0412
DESCRIPTION
Hydraulic cylinder SLPSP 2.75" bore 18" stroke
Reducing restrictor nipple, 3/4" UNO x 1/4" BSPT, 1.5mm orifice REV NO
O-Ring BSPP 1/2"
Hydraulic adaptor, Nipple, 1/4" BSP male x 3/4" UNO male with
o-ring
TITLE:
QTY.
1
1
CHANGE
DATE ECN N
1
1-3 MORANG C
GOLDACRES MITCHELL PARK
1
PH: 03 5342639 FAX: 03 534263
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 1/11/2013
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Name
DATE EDITED:
MATERIAL:
DWG NO.
ChapFoteldrcy1li8nd-erH- LyHd-rSapuelciciasl M-Y1138p9arts manual
1/11/2013
1
2
3
4
Matt
DO NOT SCALE DRAWING
SCALE:1:2.5
SHEET 1 OF 1
GA5012203 GA5000835
S89-0812
Grease Nipple 1/4" UNF Short
2
Ball valve hydraulic 1/2" FF
1
Elbow 90deg 1/2" BSP x 3/4" UNO
1
Delta Hydraulic Cylinder - Boom Lift
1 4 5 3 2
1
2
3
4
5
6
7
ITEM NO.
PART NUMBER
DESCRIP
A
ITEM NO. PART NUMBER DESCRIPTION
1
GA5065054 QTY.
Cylinder tilt 2.5" x 5" suit 2012 D
1
GA5070075
Hydraulic cylinder -2.5" bore, 2" rod, 20" stroke disp2lacemeS9n3t-0412 1
Hydraulic adaptor, male x 3/4" UNO m
pin eye
2
GA5065487
Glacier Bush 1" ID x 1" long
3
L068A
4
RO-BP08
4
Restrictor Nipple 1 UNO 1.5mm 1/2" BSPP O
3
GA5012203
Grease nipple, Short, 1/4" UNF
2
REV NO CHANGE
B
4
GA5000835
Valve, Ball, Hydraulic, 1/2" female thread inlet / outlet
1
5
S89-0812
Hydraulic adaptor, 90 Degree Elbow, 1/2" BSP - 3/4" UNO
1
GOLD
TITLE:
Delta Hydraulic Cylinder - Wing Tilt
Hydraulic cylinder - 2.
1
2
C
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 4/08/2003
DIMENSIONS ARE IN MILLIMETERS DRAWN:
3DEBUR ALL EDGES DATE EDITED:
Coen
MATERIAL:
DWG NO.
Boom lift ram assy - Pr
3
4
1
4
19/11/2012 Matt
DO NOT SCALE DRAWING
SCALE:1:5
2
D
E
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA5065054
Cylinder tilt 2.5" x 5" stroke 1 3/8" rod suit 2012 Delta
2
S93-0412
Hydraulic adaptor, Nipple, 1/4" BSP male x 3/4" UNO male with o-ring
1
REV NO CHANGE
1
GOLDA
3
L068A
Reducing restrictor nipple, 3/4" UNO x 1/4" BSPT, 1.5mm orifice
TITLE:
1
F
4
RO-BP08
O-Ring BSPP 1/2"
1
2
3
4
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 30/10/2013 DIMENSIONS ARE IN MILLIMETERS DRAWN:
1
DEBUR ALL EDGES
Name
DATE EDITED:
MATERIAL:
30/10/2013
Matt
DO NOT SCALE DRAWING
DWG NO.
Delta tilt cylinder - Spec
SCALE:1:2.5
190 - Special Evolution MY13 Parts Manual - Rev 2
203
Grease Nipple 1/4" UNF Short
2
835
Ball valve hydraulic 1/2" FF
1
2
Elbow 90deg 1/2" BSP x 3/4" UNO
1
TriTech Hydraulic Cylinder - Boom Lift
1
4
5
3
PART NUMBER
5065051-outer 5012203 5065051-pineye 2
8A
0412 BP08
22
3
4
5
DESCRIPTION
Default/ QTY.
1
Grease Nipple 1/4" UNF Short
2
1
Restrictor Nipple 1/4 BSPT to 3/4 UNO 1.5mm orifice
1
ITNEMippNleO1. /4PA" xRT3/N4"UcM/wBERO-RDINEGSCRIPTIO1 N
1 1/2G" ABS5P0P70O08-R2ing Hydraulic cy1linder - 2.5" bore, 2" rod, 21" Stroke
2 GA5065487 Glacier Bush 1" ID x 1" long
3 GA5012203 Grease nipple, Short, 1/4" UNF
4 GA5000835 Valve, Ball, Hydraulic, 1/2" female thread inlet / outlet
5 S89-0812
Hydraulic adaptor, 90 degree Elbow, 1/2" BSP- 3/4" UNO
TriTech Hydraulic Cylinder - Wing Tilt
6
7
QTY. 1 4 2 1 REV NO 1
CHANGE
GOLDA
TITLE:
Hydraulic cylinder - 2.5" b
2
3
1
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 4/08/2003
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Coen
DWG NO.
Boom lift ram assy - Prairie
DATE EDITED:
MATERIAL:
19/11/2012
2
3
4
Matt
DO NOT SCALE DRAWING
SCALE:1:5
6
5
4
ITEM NO. PART NUMBER DESCRIPTION
1
GA5065051 Hydraulic cylinder, 3.5" OD x 1.75" rod x 5" stroke
2
GA5012203 Grease nipple, Short, 1/4" UNF
QTY. 1 2
3
GA5065051 Hydraulic cylinder, 3.5" OD x 1.75" rod x 5" stroke
1
4
L068A
Reducing restrictor nipple, 3/4" UNO x 1/4" BSPT, 1.5mm orifice
1
5
S93-0412
Hydraulic adaptor, Nipple, 1/4" BSP male x 3/4" UNO male with o-ring 1
6
RO-BP08
O-Ring BSPP 1/2"
1
-
GA5052730 Seal kit, heavy duty suit 3 1/2" bore x 1.75" rod
-
REV NO CHANGE
GOL
TITLE:
Hydraulic cylinder
Chapter 18 - Hydraulics - 191 UNLESS OTHERWISE SPECIFIED
DATE CREATED:
14/05/2010
DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
RR
GA5065051
DATE EDITED:
MATERIAL:
5/12/2012
2
3
4
Matt
DO NOT SCALE DRAWING
SCALE:1:5
1
2
3
4
5
6
7
A
TriTech Hydraulic Cylinder - Fold RH
B
3
2
4
5
C
1 6
D
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1
GA5018538 Hydraulic cylinder, 3" bore x 1.25" rod x 18" stroke, external phasing
1
2
GA5021925 Small bearing bush, Suit screw on rose end
3
1
23
GA50676053 Bearing, suit scre4 w on rose end, GEG 530 ES 2RS
6
2
7
4
GA5067610 Circlip, suit bearing screw on rose end, RTW 55
2
E
5
GA5012203 Grease nipple, Short, 1/4" UNF
2
6
GA5021930 Large bearing bush, Suit screw on rose end
7
L068A
Reducing restrictor nipple, 3/4" UNO x 1/4" BSPT, 1.5mm orifice
1 REV NO CHANGE
1 GOLDACRES
-
GA5052680 Seal Kit, heavy duty, to suit 3" bore x 1.25" rod
- TITLE:
Phasing cylinder 3x18x1.25 (externa
F
TriTech Hydraulic Cylinder - Fold LH DATECREATED: UNLESS OTHERWISE SPECIFIED 29/09/2010 DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DWG NO.
GA5018538
DATE EDITED:
MATERIAL:
19/11/2012
1
2
3
3
2
4
David
DO NOT SCALE DRAWING
SCALE:1:5
SHE
4
1
7
5 6
ITEM NO. PART NUMBER DESCRIPTION
1
GA5018542 Hydraulic cylinder, external phasing, 3.25" bore x 1.25" rod x 18"stroke
2
GA5021925 Small bearing bush, Suit screw on rose end
3
GA5067605 Bearing, suit screw on rose end, GEG 30 ES 2RS
QTY. 1 3 2
4
GA5067610 Circlip, suit bearing screw on rose end, RTW 55
2
5
GA5012203 Grease nipple, Short, 1/4" UNF
2
6
GA5021930 Large bearing bush, Suit screw on rose end
1
7
GA5022423
Relief Valve, (folding Phasing Cylinders GA5018540 and GA5018542) - REV NO CHANGE
-
GA5052685 Seal Kit, heavy duty, to suit 3 1/4" bore x 1.25" rod
- GOLDACRE
TITLE:
Phasing cylinder 3x18x1.25 (exte
192 - Special Evolution MY13 Parts Manual - Rev 2
1
2
3
4
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 29/09/2010
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
Luke M
DATE EDITED:
MATERIAL:
19/11/2012
Matt
DO NOT SCALE DRAWING
DWG NO.
GA5018542
SCALE:1:5
1
2
3
4
TriTech Hydraulic Cylinder - Yaw
A
B
1
5
3 4
6 A
B
C
C
5 2
D
REV NO 1
ITEM NO. PART NUMBER
1
GA5060817
2 3 CHANGE
4
GA5067605
GA506761A0PPL DATE
2
GA5012203
5
GA5021925
-
GA5052745
DESCRIPTION
1-3 MORQANTGYC. R
Hydraulic cylinder, 2" bore x 1 1/4" shaft x 1G17O.5LmDmACstrRoEkSeMP, HIT:C0H3E5L3L4P2A63R9K93352
Spherical bearing ends
TITLE:
FAX: 03 53426308
Hydraulic yaw cylinder 2" bore
Bearing, suit screw on rose end, GEG 30 ES 2RS UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS DEBUR ALL EDGES
DATE CREATED:
21/04/2009
DRAWN:
DWG NO:
Circlip, suit bearing screw on rose end, RTW 55 DATEEDITED: 19/11/2012 David
UNTOL. DIMENSIONS T.Watts
OPEN DIM
± 0.20 MATERIAL:
ONE DEC. PL. ± 0.10
GA5060817
TWO DEC. PL. ± 0.05
2
A4
2
Grease nipple, Short, 1/4" UNF ANGULAR
± 0°30' DO NOT SCALE DRAWING
SCALE:1:2.5
SHEET 1 OF 1
2
Small bearing bush, Suit screw on rose end, Hypower, R-10424
4
Seal Kit, heavy duty, 2" bore x 1 1/4" shaft
-
Chapter 18 - Hydraulics - 193
194 - Special Evolution MY13 Parts Manual - Rev 2
Filtration
Chapter 19
3/4 BSP Filter with 200 mesh screen
ITEM NO. 1 2 3 4
PART NUMBER CPB50492-3/4-PP CPB50493-PP CP50494 CP16903-7-SSPP
DESCRIPTION AAB126 Filter body AAB126 filter bowl AAB126 Filter bowl o-ring (square) 200 Mesh Screen for foam marker (Orange)
QTY. 1 1 1 1
Chapter 19 - Filtration & Hose - 195
Pressure Filter Assembly
ITEM NO. 1
2
3 4 5 6 7 8 9
PART NUMBER AAB126ML-F75-80 CP15941-4-SSPP AAB126ML-F75-100
CP15941-5-SSPP
GA5009335 FC200 M200125BRB GA5004883 GA5011503 GA5004917 CP48656-EPR
DESCRIPTION Filter, 75 series flange inlet & outlet, 80 mesh (Blue screen),Teejet Filter screen, 80 mesh, Blue, SS & polypropylene,Teejet Filter, 75 series flange inlet & outlet, 100 mesh (Green screen) Filter screen, 100 mesh, Green, SS & polymer, Suits AA126 AA124-AL & AA124ML filters Seal, 41.5 ID x 55 OD x 6.5mm thick, EPDM, suit 1 1/2" flange Clamp,Worm screw, Use with 2" standard flange port, Banjo Hose barb, Flanged, Straight, 2" flange x 1 1/4" barb, Banjo Washer 8mm Flat ZP Heavy Duty Bolt M8 x 140 ZP GR8.8 Nut M8 Nyloc ZP Seal, 98 OD x 91 ID x 7mm thick, Suits AA126ML-5
QTY. 1 1 1
1
3 3 2 8 4 4 2
196 - Special Evolution MY13 Parts Manual - Rev 2
2" Fill Filter with 120 mesh screen
ITEM NO. PART NUMBER
1
C00002066
2
C00201031
3
3290003030
4
GA5001329
5
GA5012545
6
GA5000421
DESCRIPTION Body, suits 2" Geoline Geoline top cover & nut Filter screen, 50 mesh, Blue, SS & polypropylene, Arag Seal,Viton, Suit Geoline 2" fill filter GA5001333 O-ring, Suit Geoline 2" fill filter GA5001333 Filter screen, 50 mesh,White, Sock type, Suit SS filter screen on 2" fill filter
QTY. 1 1 1 2 1
1
Chapter 19 - Filtration & Hose - 197
3
4
5
6
7
8
DESCRIPTION
QTY.
m line filter mount plate bolt on
1
A
4 BSP filter with 200 Mesh screen
2
Washer 8mm SS HD
8
M8x90 Bolt
4
In Line Boom Filter M8 Nyloc Nut
4
2x50x50 Square Top U bolt
2
M12 WASHER
4
M12 Nyloc nut Z/P
4
se barb elbow 3/4" thread 3/4" barb
4
B
6
C
7
8
1
9
D
2
4
3
3 5
ITEM NO. PART NUMBER DESCRIPTION
REV NO CHANGE
DATE ECN NO.
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399 FAX: 03 53426308
TITLE:
In Line Boom Filter Bolt On AssemQTY.
1
GA4505205
Boom line filter mount plate bolt on UNLESS OTHERWISE SPECIFIED
DATE CREATED:
21/08/2012
DWG NO.
1
2
AAB126ML-3-200
DIMENSIONS ARE IN MILLIMETERS DRAWN:
Filter, 3/4" female thread inlet DEBUR ALL EDGES DATE EDITED:
Coen
MATERIAL:
/
outlet,
OraGngAe492006002m0 esh
screen
2
A3
4/09/2012
3
3
GA504 48115
Nut M6 Matt Nyloc ZP
DO NOT SCALE DRAWING
SCALE:1:2
8 SHEET 1 OF 1
4
GA5011495
Bolt M8 x 90 ZP GR8.8
4
5
GA5004917
Nut M8 Nyloc ZP
4
6
GA5011243
M12 x 50mm x 50mm Square Top U Bolts
2
7
GA5000587
Washer 12mm Flat ZP Heavy Duty
4
8
GA5012461
Nut M12 Nyloc ZP
4
9
HB075-90
Hose barb, Elbow, 90 degree, 3/4" male thread x 3/4" hose, Banjo
4
198 - Special Evolution MY13 Parts Manual - Rev 2
2" Suction Filter
ITEM NO. 1 2 3 4
PART NUMBER 316070.010 317000.020 316000.040 317002.030
DESCRIPTION Filter Body, 316 and 317, 2", Inlet Outlet thread 317 Suction Filter Bowl Nut, Plastic, Suit 316 suction filter, 8 Threads Screen 32 Mesh Filter (White)
QTY.
1 1 1 1
Air Filter
PART NO GA5005259 GA5049460
DESCRIPTION Air filter, 1" BSP male thread Filter element, For filter body GA5005259, Suit foam marker compressor
Chapter 19 - Filtration & Hose - 199
Hose Clamps
PART NUMBER GA5004865 GA5000469 GA5000999 GA5001681 GA5002783 GA5002873 GA5003325 GA5016815 GA5004241
DESCRIPTION 8-16mm Hose Clamp 12-20mm Hose Clamp 16-25mm Hose Clamp 20-32mm Hose Clamp 30-45mm Hose Clamp 32-50mm Hose Clamp 40-60mm Hose Clamp 50-70mm Hose Clamp 60-80mm Hose Clamp
Cable Ties
PART NUMBER GA5002173 GA5003517 GA5004455
GA5000685
GA5000687 GA5021235
DESCRIPTION Cable Tie, Black, 100x2.5mm Cable Tie, Black, 140x3.5mm Cable Tie, Black, 190x4.5mm
Cable Tie, Black, 320x7.5mm
Cable Tie, Black, 360x4.5mm Cable Tie, Black, 540x7.5mm
QTY 1000 1000 1000
100
100 100
200 - Special Evolution MY13 Parts Manual - Rev 2
1
2
3
4
5
6
7
8
A
A
Hoses
B
B
C
C
A (ID) B (OD)
D
D
Suction Hose
Part No HOS20S
E
HOS25S HOS32S
HOS38S
Description 20mm Suction Hose 25mm Suction Hose 32mm Suction Hose
38mm Suction Hose
Internal Diameter (A) 20mm 25mm 32mm
38mm
Outside Diameter (B)
32mm
35mm 45mm 48mm
REV NO TITLE:
CHANGE
DATE ECN NO.
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352 PH: 03 53426399 FAX: 03 53426308
HOF S51S HOS63S 1 HOS75S
51mm Suction Hose 63mm Suc2 tion Hose 3 75mm Suction Hose
51mm 4 63mm
75mm
UNLESS OTHERWISE SPECIFIED
63mm DATE CREATED:
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES
DATE EDITED:
76mm MATERIAL:
DO NOT SCALE DRAWING
93mm
Suction hose can be defined by its external green stripe and wire reinforcement
Pressure Hose
DWG NO. SCALE:1:3
SHEET 1 OF 1
A3
Part No HOS7P HOS13P HOS20P
Description 7mm Pressure Hose 13mm Pressure Hose 20mm Pressure Hose
Internal Diameter (A) 7mm 13mm 20mm
Outside Diameter (B) 12.5mm 20mm 28mm
HOS25P
25mm Pressure Hose
25mm
34mm
HOS32P
32mm Pressure Hose
HOS38P
38mm Pressure Hose
Pressure hose can be defined by its blue internal layer
32mm 38mm
43mm 48mm
PVC Hose
Part No HOS25PVC HOS40PVC HOS50PVC
Description 25mm PVC Hose 40mm PVC Hose 50mm PVC Hose
Internal Diameter (A) Outside Diameter (B)
25mm
32mm
40mm
50mm
50mm
58mm
PVC Hose can be defined by its ribbed outside finish
Sight Tube Hose
Part No
Description
Internal Diameter (A) Outside Diameter (B)
HOS12SIGHT 12mm Clear Sight Tube Hose
HOS12WSIGHT 12mm Clear Sight Tube Hose with wire
Lay Flat Hose
Part No
Description
GA5021395 50mm Blue Lay flat Hose
Internal Diameter (A) Outside Diameter (B)
Chapter 19 - Filtration & Hose - 201
www.goldacres.com.au
Adobe PDF Library 10.0.1 Adobe InDesign CS6 (Windows)