User Guide for novasina models including: nLink Plus AS differential Pressure IP and EC Transmitter, AS differential Pressure IP and EC Transmitter, Pressure IP and EC Transmitter, IP and EC Transmitter, EC Transmitter

Manuel Vigini

Kurzanleitung

nLink EC Analog (Differenzdruck) - Novasina AG


File Info : application/pdf, 5 Pages, 231.15KB

PDF preview unavailable. Download the PDF instead.

007516.01 QuickGuide-nlink-AS-dP
Quick - Guide nLink+ AS differential pressure
IP & EC Transmitter
English page 2&3: Thank you for buying the nlink+ dP transmitter. You obtained a reliable transmitter for differential pressure probes providing 2 analog signals for your control system. As the transmitters have passed quality assurance testing you can use them out of the box.
Deutsch Seite 3&4: Vielen Dank für den Erwerb des nlink+ DP Messumformer. Sie erhalten damit einen zuverlässigen und robusten Differenzdruck Messumformer, der 2 analoge Signale mit freier Konfiguration für Ihre Steuerung zur Verfügung stellt.
Novasina AG, Neuheimstrasse 12, 8853 Lachen, Switzerland Telephone +41 55 642 67 67, sales@novasina.ch, www.novasina.com

English

Deutsch

English

Read the instruction manual (available on the website) for detailed instructions and safe handling
Quick Guide:
Connect the power supply and signal cable according to the wiring diagram and connect the tubes.

Default settings:
nLink+ dP +/-25Pa Signal loop Parameter AO1: 4-20mA Differential pressure AO2: 4-20mA Atmospheric pressure
nLink+ dP +/-250Pa Signal loop Parameter AO1: 4-20mA Differential pressure AO2: 4-20mA Atmospheric pressure

Low range High range -25.00Pa +25.00Pa 260.00hpa 1260.00hpa
Low range High range -250.00Pa +250.00Pa 260.00hpa 1260.00hpa

Dok Nr. 007516.01

2/ 5

nLink+ dP +/-5000Pa

Signal loop AO1: 4-20mA

Parameter
Differential pressure

AO2: 4-20mA Atmospheric

pressure

Low range High range -5000.00Pa +5000.00Pa
-260.00hpa 1260.00hpa

Use nlink-USB cable (Art-No 2601818) and configuration software nSoft-ACT-T to change these settings anytime.

Technical information and other information subject to change without notice

Beachten Sie das Benutzerhandbuch (verfügbar auf unserer Webseite) für weitere Anweisungen und Hinweise zur sicheren Handhabung des Bauteiles.
Quick Guide:
Schliessen Sie Stromversorgungs- und Signalkabel gemäss dem Schaltplan an und stecken Sie die Schläuche ein.

Deutsch

Dok Nr. 007516.01

3/ 5

Deutsch

Werkseinstellungen
nLink+ DP +/-25Pa Signal loop Parameter AO1: 4-20mA Differenzdruck AO2: 4-20mA Atmosphärendruck

Low range High range -25.00Pa +25.00Pa 260.00hpa 1260.00hpa

nLink+ DP +/-250Pa
Signal loop Parameter AO1: 4-20mA Differenzdruck AO2: 4-20mA Atmosphären-
druck

Low range High range -250.00Pa +250.00Pa 260.00hpa 1260.00hpa

nLink+ DP +/-5000Pa
Signal loop Parameter AO1: 4-20mA Differenzdruck AO2: 4-20mA Atmosphären-
druck

Low range High range -5000.00Pa +5000.00Pa 260.00hpa 1260.00hpa

Verwenden Sie das nlink-USB Kabel (Art-No 2601818) und Konfigurationssoftware nSoft-ACT-T zur Änderung der Einstellungen.
Technische Änderungen, Irrtümer und Druckfehler vorbehalten

Dok Nr. 007516.01

4/ 5

For further information, please get in touch with your sales representative.
Check our website www.novasina.ch for the instruction manual, software download and distributor contact information.
Für weitere Informationen stehen Ihnen unsere Verkaufsberater jederzeit gerne zur Verfügung.
Besuchen Sie unsere Webseite www.novasina.ch für Handbücher, Software Download sowie Kontaktinformationen unserer Distributoren.

Dok Nr. 007516.01

5/ 5



References

Microsoft Word für Microsoft 365