SG5KTL-MT/SG6KTL-MT/SG8KTL-M

SG5KTL-MT/SG6KTL-MT/SG8KTL-M 9 ( 9 V N DC1 DC Switch DC Bus L1 Inverter Cir cuit (DC/AC) PE AC Filter AC Relays AC EMI Filter L2 L3 V DC ACSPD

PDF Sg5ktl-mt/Sg6ktl-mt/Sg8ktl-m

PDF preview unavailable. Download the PDF instead.

3001200083 Sungrow SG8KTL-M-V13 Datasheet EN
SG5KTL-MT/SG6KTL-MT/SG8KTL-M
Multi-MPPT String Inverter for 1000 Vdc System

High Yield
Max. efficiency 98.6%, European efficiency 98.0% 1.1 overload capacity, 10% more yield under high irradiance Adapt to complex power grid, extend the grid-connected generation time
Safe and Reliable
High power quality, no interference for electrical equipment Low radiation, compliance with household equipment standards High anti-corrosion with aluminum alloy die casting Built-in surge arresters and residual current protection

Easy O&M
20kg, easy O&M Plug and play design, easy installation String current monitoring function for fast trouble shooting Fast commissioning, easy local and on-line monitoring

Circuit Diagram

Efficiency Curve

DC1 DC2

DC EMI Filter
DC DC SPD Switch

MPPT (Boost1)
MPPT (Boost2)

AC Filter
DC Bus Inverter Circuit (DC/AC)

AC Relays

L1

AC EMI

Filter

L2

L3

N

AC SPD PE

E ciency

100%
95% 92%
90%
80% 0%

Vdc=850 V Vdc=600 V Vdc=380V

20%

40%

60%

80%

100%

Normalized Output Power

© 2018 Sungrow Power Supply Co., Ltd. All rights reserved. Subject to change without notice. Version 1.0

SG5KTL-MT/SG6KTL-MT/SG8KTL-M

Input (DC)
Max. PV input voltage Min. PV input voltage / Start-up input voltage Nominal PV input voltage MPP voltage range MPP voltage range for nominal power No. of independent MPP inputs Max. number of PV strings per MPPT Max. PV input current Max. current for input connector Max. DC short-circuit current

SG5KTL-MT
1100 V 200 V / 250 V 600 V 200 ­ 1000 V 240 ­ 850 V 2 1 22A (11A / 11A) 15 A 30 A (15A / 15A )

SG6KTL-MT 290 ­ 850 V

SG8KTL-M 380 ­ 850 V

Output (AC)

AC output power Max. AC output current Nominal AC voltage AC voltage range Nominal grid frequency / Grid frequency range THD DC current injection Power factor at nominal power / Ajustable power factor Feed-in phases / connection phases

5.5 kVA @ 35  / 5.0 kVA @ 45  6.6 kVA @ 35  / 6.0 kVA @ 45 

8.5 A

10.0 A

3 / N / PE, 230 / 400 V

270 ­ 480 V

50 Hz / 45 ­ 55 Hz, 60 Hz / 55 ­ 65 Hz

< 3 % (at nominal power)

< 0.5 % In

>0.99 / 0.8 leading ­ 0.8 lagging

3 / 3

8.8 kVA @ 35  / 8.0 kVA @ 45  13.3 A

Efficiency Max. efficiency / European efficiency

98.2% / 97.6%

98.4% / 97.7%

98.6% / 98.0%

Protection
DC reverse connection protection AC short-circuit protection Leakage current protection Grid monitoring DC switch / AC switch PV string current monitoring Overvoltage protection

Yes Yes Yes Yes Yes* / No Yes DC Type II / AC Type II

General Data

Dimensions (W*H*D)

370*485*160 mm

Weight

20 kg

Isolation method

Transformerless

Degree of protection

IP65

Night power consumption

< 1 W

Operating ambient temperature range

-25 to 60  (> 45  derating)

Allowable relative humidity range (non-condensing) 0 ­ 100 %

Cooling method

Natural cooling

Max. operating altitude

4000 m (> 3000 m derating)

Display / Communication

LED, Bluetooth + APP / RS485, (WiFi, E-Net optional)

DC connection type

MC4 (Max. 6 mm² )

AC connection type

Plug and play connector (Max. 6 mm² )

Compliance

EN62109-1, EN62109-2,

EN62109-1, EN62109-2,

IEC 61727, IEC 62116,

IEC 61727, IEC 62116,

VDE 0126-1-1/4105, AS 4777.2, VDE 0126-1-1/4105,

EN 50438:2013, C10/11, G59/3 EN 50438:2013, C10/11, G59/3

Grid Support Type designation

Active & reactive power control and power ramp rate control

SG5KTL-MT-10

SG6KTL-MT-10

EN62109-1, EN62109-2, IEC 61727, IEC 62116, VDE 0126-1-1/4105, UTE C15-712-1, VFR-2014, CEI 0-21, EN 50438:2013, C10/11, G59/3
SG8KTL-M-10

*:Devices for Australia are not equipped with DC switches

© 2018 Sungrow Power Supply Co., Ltd. All rights reserved. Subject to change without notice. Version 1.0


Adobe InDesign CS6 (Windows) Adobe PDF Library 10.0.1