Vulcan V1FT36 Cocina de servicio pesado, 36"W, base modular, tapa fran – Restaurant World
Item # HEAVY DUTY COOKING
C.S.I. Section 11420
HEAVY DUTY GAS RANGE
RADIAL FIN FRENCH TOP / 36" WIDE GAS RANGE
Model V1FT36S shown on a standard oven base
SPECIFICATIONS
36" wide heavy duty gas range, Vulcan model No. V1FT36 (modular), V1FT36B (cabinet base), V1FT36S (standard oven base) or V1FT36C (convection oven base). Modular construction for ease of installation. Stainless steel front, plate ledge, front top ledge with pull-out condiment rails, sides, base, stub back and 6" adjustable legs on all "B", "S", & "C" models. Stainless steel extra deep crumb tray. Three cast ring burners totaling 45,000 BTU/hr. Individual pilots and controls for each burner. Heavy polished cast iron French plate. Standard Oven: 50,000 BTU/hr. with porcelain oven bottom, sides, and interior door panel. Convection Oven: 32,000 BTU/hr. with porcelain oven bottom, sides, and interior door panel (115v-1 phase blower motor, 4 amps, 6' cord & plug). Ovens measure 27"w x 27"d x 13"h. Standard oven thermostats adjust from 150° 550°F. Convection oven adjusts from 175° 550°F and the optional finishing oven for standard ovens adjusts from 300° 650°F. Standard oven supplied with one rack, convection oven with two. Both ovens allow for three rack positions. Oven door is heavy duty with counter weight door hinges. 11/4" diameter front manifold and 11/4" rear gas connection, capped. Total input 45,000 BTU/hr.
Exterior Dimensions: 363/4"d x 36"w x 36"h on 6" adjustable legs
V1FT36 V1FT36B V1FT36S V1FT36C
Radial Fin French Top / Modular Radial Fin French Top / Cabinet Base Radial Fin French Top / Standard Oven Radial Fin French Top / Convection Oven
STANDARD FEATURES
Stainless steel front, front top ledge, burner box, sides, base and stub back
11/4" diameter front gas manifold with 11/4" rear gas connection (capped)
45,000 BTU/hr. burners (3 ring burner) 50,000 BTU/hr. standard oven burner 32,000 BTU/hr. convection oven burner Porcelain oven cavity Individual pilots and controls for each burner Polished cast iron French Top 4" stainless steel stub riser 6" adjustable stainless steel legs for "S", "C", & "B" models
(no legs for modular model) Stainless steel cabinet base doors One year limited parts and labor warranty
OPTIONAL FEATURES (Factory Installed)
Cap and cover front manifold Stainless steel oven cavity 650°F oven thermostat and steel hearth. ("S" models) Fan cooling package ("C" models) 4" adjustable flanged feet for modular models Less legs for dolly mounting of "S", "C", & "B" models 3" high toe base for curb mounting
ACCESSORIES (Packaged & Sold Separately)
3/4", 1", or 11/4" gas pressure regulator (specify gas type pack loose) Set of 4 casters, 6" high (two locking) 6" adjustable flanged feet for "S", "C", & "B" models Extra removable shelves for use with Universal rack guides (cabinet base) Banking strip Common condiment type, telescoping plate rails (starting at 24" length) 10", 22", or 34" high back risers (no shelf) 22" single deck solid or flo-thru high shelf risers 34" double deck solid or flo-thru high shelf risers Dolly frames Flexible gas hose with quick disconnect & restraining device
a division of ITW Food Equipment Group LLC
P.O. Box 696 Louisville, KY 40201 Toll-free: 1-800-814-2028 Local: 502-778-2791 Quote & Order Fax: 1-800-444-0602
F37442 (08/11)
HEAVY DUTY COOKING
HEAVY DUTY GAS RANGE
RADIAL FIN FRENCH TOP / 36" WIDE GAS RANGE
INSTALLATION INSTRUCTIONS
1. A properly sized gas pressure regulator suitable for battery or single unit application must be furnished and installed. Natural gas 6.0" W.C., propane gas 10.0" W.C.
2. An adequate ventilation system is required for commercial cooking equipment. Information may be obtained by writing to the National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02269, www.NFPA.org. When writing, refer to NFPA No. 96.
3. These units are manufactured for installation in accordance with ANSZ223.1A (latest edition), National Fuel Gas Code. Copies may be obtained from The American Gas Association, 400 N Capitol St. NW, Washington, DC 20001, www.AGA.org.
4. Clearances Combustible Non-combustible
Rear 10" 0"
Sides 10" 0"
5. For proper combustion, install equipment on adjustable legs or casters. On curb or platform, allow 31/2" front overhang. Toe base with leveling bolts are required for curb installation. Specify when ordering.
6. Cannot be batteried with GH series equipment. 7. This appliance is manufactured for commercial installation only
and is not intended for home use.
NOTE:In line with its policy to continually improve its product, Vulcan reserves the right to change materials and specifications without notice.
Specify type of gas when ordering. Specify altitude when above 2,000 feet.
TOP CONFIGURATION
MODEL NUMBER V1FT36
V1FT36B
V1FT36S
V1FT36C
DESCRIPTION Radial Fin French Top / Modular Radial Fin French Top / Cabinet Base Radial Fin French Top / Standard Oven Base Radial Fin French Top / Convection Oven Base
TOTAL INPUT BTU / HR 45,000
45,000
95,000
77,000
SHIPPING WEIGHT LBS / KG 404 / 183
504 / 229
685 / 311
763 / 346
This appliance is manufactured for commercial use only and is not intended for home use.
a division of ITW Food Equipment Group LLC
P.O. Box 696 Louisville, KY 40201 Toll-free: 1-800-814-2028 Local: 502-778-2791 Quote & Order Fax: 1-800-444-0602
F37442 (08/11)
NOTE: In line with its policy to continually improve its products, Vulcan reserves the right to change materials and specifications without notice.
Adobe InDesign CS5 (7.0.4) Adobe PDF Library 9.9