TP-Link Quick Installation Guide

Plug and Play

This guide demonstrates the setup process using the TL-WPA7517 KIT (European version). Images may differ from actual products.

1. Step 1: Connect the Adapter

   Plug the adapter into a power outlet and connect it to your router's LAN port using an Ethernet cable.

   Diagram Description: A router is shown connected via an Ethernet cable to a TP-Link TL-PA7017 Powerline adapter, which is plugged into a wall outlet.

2. Step 2: Connect the Extender

   Plug the extender into a power outlet on the same electrical circuit. Wait until the extender's Powerline LED turns on.

   Note: If the LED is off, refer to FAQ > Q2.

   Diagram Description: The TL-PA7017 adapter is shown connected to a router. A TP-Link TL-WPA7517 extender is plugged into a different wall outlet. An indicator light on the extender is labeled 'On'.

3. Step 3: Enjoy!

   Connect your devices to the internet using the default SSID (network name) and password found on the label at the top of the extender.

   Tip: To unify or personalize your network, refer to the back page for instructions.

   Diagram Description: A smartphone and a laptop are shown connecting wirelessly to the TL-WPA7517 extender. The extender has labels for SSID, Wireless Password, and a QR code for downloading the tpPLC app.

Unify Your Wi-Fi Networks via WPS

Copy the SSID and password from your router via WPS to create a unified Wi-Fi network throughout your home.

Note: If your router lacks a WPS button, manually change the extender's Wi-Fi settings using the tpPLC app, tpPLC Utility, or web interface.

1. Plug in the extender in the same room as your router. Wait until the extender's Wi-Fi LED turns on.
2. Press your router's WPS button. Within 2 minutes, press the extender's Wi-Fi button for 1 second. The extender's Wi-Fi LED will blink. When it stays on, Wi-Fi settings have been copied.

   Note: If Wi-Fi settings are not copied within 2 minutes, manually change the extender's Wi-Fi settings.

3. Relocate the extender and enjoy the internet using your router's SSID and password.

Diagram Description: A sequence of diagrams illustrates the WPS process: a wireless router, an extender, and arrows indicating the WPS button press on the router and then the extender's Wi-Fi button. Status indicators for blinking and 'On' are shown.

Create a Secure Powerline Network by Pairing

Note: Pair only two devices at a time. It is recommended to plug in the powerline devices near each other during pairing.

1. Press the Pair button on the adapter for 1 second. Its Power LED should start blinking.

   Note: If the Power LED does not blink, press the Pair button again.

2. Within 2 minutes, press the extender's Pair button for 1 second. Its Power LED should start blinking.
3. When the extender's Powerline LED turns on, a powerline network has been successfully created.

Diagram Description: Diagrams show the pairing process: pressing the Pair button on the adapter (TL-PA7017), then pressing the Pair button on the extender (TL-WPA7517). LED status indicators for blinking and 'On' are shown for both devices.

Sync Wi-Fi Settings to More Extenders

If you have additional extenders, plug in and pair each one with the existing adapter to join the network. The Wi-Fi settings will automatically sync from the existing extender to the new ones.

Physical Appearance

Diagram Description: Illustrations of the TP-Link Powerline adapter and extender showing the location of the Power LED, Powerline LED, Ethernet Port, and Pair/Reset Button. A Wi-Fi LED is also shown on the extender.

LED Status Descriptions

* If the device connected to TL-PA7017 is turned off or inactive for more than 5 minutes, TL-PA7017 will automatically switch to Power-Saving Mode.

Button Descriptions

Personalize Your Network

tpPLC App

For easy management via your smartphone or tablet, download the app from the App Store or Google Play, or scan the QR code.

Diagram Description: A QR code is displayed for downloading the tpPLC app.

tpPLC Utility

For easy management via your computer, download the utility from the product's Support page at https://www.tp-link.com/support/download/.

Note: For detailed instructions, refer to the utility manual on the product's Support page.

Web Interface

To access all settings, connect to an extender wirelessly and visit http://tplinkplc.net.

Note: For detailed instructions, refer to the product manual on the product's Support page.

Frequently Asked Questions

Q1. How do I reset my adapter and extender to factory default settings?

A: Press and hold the Pair button for at least 6 seconds. Release the button and all LEDs turn off. When the LEDs turn back on, the reset process is complete.

Q2. What should I do if the Powerline LED is off?

1. Try another wall socket and ensure all powerline devices are on the same electrical circuit.
2. Attempt to set up a powerline network by pairing. Refer to the pairing instructions above.
3. If the problem persists, contact TP-Link Technical Support.

Q3. What should I do if there is no internet connection in my powerline network?

1. Ensure all powerline adapters and extenders are on the same electrical circuit.
2. Verify that the Powerline LEDs are lit on all devices. If not, pair all devices again.
3. Confirm that all devices are correctly and securely connected.
4. Test your internet connection by connecting a computer directly to the modem or router.

Q4. What should I do if a successfully-paired extender does not reconnect after relocation?

1. Ensure all powerline adapters and extenders are on the same electrical circuit.
2. Try pairing the extender again, and confirm the Powerline LED is on.
3. Check for potential interference from appliances like washing machines or air conditioners that might be too close to a powerline device. If your powerline device has an integrated electrical socket, plug the interfering appliance into it to mitigate electrical noise.

Support and Information

For technical support, replacement services, user guides, and other information, please visit https://www.tp-link.com/support, or scan the QR code.

To connect with TP-Link users or engineers, join the TP-Link Community at https://community.tp-link.com.

For suggestions or needs regarding product guides, email techwriter@tp-link.com.cn.

Declaration of Conformity

TP-Link hereby declares that this device complies with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863. The original EU declaration of conformity can be found at https://www.tp-link.com/en/ce.

Safety Information

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device. For service, contact TP-Link.
• Do not use the device where wireless devices are not permitted.
• The socket-outlet should be installed near the equipment and be easily accessible.
• Plug powerline devices directly into wall outlets, not power strips.

Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that accidents or damage will not occur due to improper use. Use this product with care and at your own risk.