Eaton Tripp Lite SmartPro 3000VA 2250W 120V Line-Interactive Sine Wave UPS

Model Number: SMART3000RM2ULN

Highlights

Lithium UPS provides 3kVA capacity power protection for critical network components.
LiFePO4 battery backup lasts longer and weighs less than equivalent lead acid battery.
Pure sine wave output ensures maximum stability and compatibility with equipment.
Automatic voltage regulation corrects abnormal voltage conditions without using the battery.
Preinstalled WEBCARDLXE allows full remote control of UPS and access to advanced features.

Package Includes

3000VA 2250W 120V Line-Interactive UPS
WEBCARDLXE network interface
USB cable
DB9 cable
EPO cable
Rack-mounting hardware
Owner's manual

Features

This SmartPro® line-interactive UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage valuable IT equipment. The SMART3000RM2ULN is ideal for delivering regulated sine wave output to large and small network devices, high-end workstations, storage and security equipment in labs, server rooms and data centers.

Reliable LiFePO4 Battery Backup Offers Longer Life and Less Weight than Lead Acid Battery

This lithium battery UPS system features a state-of-the-art lithium iron phosphate (LiFePO4) internal battery with longer life, more cycles, and faster recharge. It more than doubles the service life of an equivalent lead acid battery and offers up to three times more charge/discharge cycles. It recharges to 100% capacity in less than three hours, making the lithium UPS system an ideal backup in case of power outage. The LiFePO4 battery has 60% the weight of an equivalent lead acid battery, which reduces the overall UPS weight.

Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions

Built-in AVR corrects abnormal voltage conditions without using the battery. The SMART3000RM2ULN maintains regulated 120V nominal output during brownouts and overvoltages from 83V to 145V while keeping the battery fully charged and ready to take over in case of power failure.

Preinstalled WEBCARDLXE Network Interface Allows Remote Control and Access 24/7

The WEBCARDLXE with PowerAlert Device Manager software enables full remote configuration and management, including load shedding, reboots of connected equipment, and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices when a loss of connectivity is detected. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring and control options.

9 Outlets Protect Your Connected Components

One NEMA L5-30R and eight NEMA 5-15/20R outlets are protected by 570 joules of surge protection to fight off damaging power surges and spikes. Two outlets are split into single-outlet load banks that are switchable via network interface. These outlets let you power connected equipment on and off remotely to reset or reboot connected equipment or to shed less significant loads to extend battery runtime for more critical equipment.

Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better

The SMART3000RM2ULN filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

High Efficiency Helps the Environment and Your Cash Flow

Operating with a high 98% line-mode efficiency, the SMART3000RM2ULN can save BTU heat output and energy costs.

Intuitive Front-Panel Interface for Convenient UPS Operation and Monitoring

The front-panel LCD information and configuration screen displays detailed UPS and site power status and operating data, as well as input and output voltage, operating mode, alarm function, and additional options. An alarm sounds to warn you of power failure, low battery, overload, UPS fault, and remote shutdown conditions. The LCD rotates to accommodate both rack-mount and tower configurations.

Advanced Communications Ports Allow for Automatic Saves and Shutdowns

RS-232 and USB ports connect to a device for a variety of communication options (cables are included). The EPO (Emergency Power Off) port permits emergency shutdown of connected equipment.

Versatile Installation Options

Hardware is included for mounting the SMART3000RM2ULN in 2U of space in an EIA-standard 19-inch 4-post rack. Use the 2POSTRMKITWM (sold separately) for 2-post rack mounting or wall mounting or the UPSHDEARKIT (sold separately) for 2-post front-mount installation. Use the 2-9USTAND (sold separately) for mounting in an upright tower position. A 10-foot (3.1-meter) power cord with NEMA L5-30P plug connects the SMART3000RM2ULN to a compatible AC power source.

Specifications

Category	Details
UPC Code	037332297655
UPS Type	Line-Interactive
Input Phase	Single-Phase
Rated Input Current (Maximum Load)	24A (120V)
Nominal Input Voltage(s) Supported	110V AC; 115V AC; 120V AC
UPS Input Connection Type	L5-30P
UPS Input Cord Length (ft.)	10
UPS Input Cord Length (m)	3.1
Recommended Electrical Service	30A 120V
Maximum Input Amps	24
Output Capacity (VA)	3000
Output Capacity (kVA)	3
Output Capacity (Watts)	2250
Output Capacity (kW)	2.25
Power Factor	0.75
Nominal Voltage Details	120v nominal output in battery mode
Frequency Compatibility	60 Hz
Output Voltage Regulation (Line Mode)	-14%, +6%
Output Voltage Regulation (Battery Mode)	+/- 5%
Load Management Receptacles	Two switchable single-outlet load banks
Output AC Waveform (AC Mode)	Pure Sine wave
Output (Watts)	1920
Output AC Waveform (Battery Mode)	Pure Sine wave
Nominal Output Voltage(s) Supported	110V; 115V; 120V
Output Receptacles	(8) 5-15/20R; (1) L5-30R
Individually Controllable Load Banks	Yes
Battery Type	Lithium-ion (LiFePO4)
Runtime Full Load (min.)	3.5 min. (2250W)
Runtime Half Load (min.)	9.5 min. (1125W)
Expandable Runtime	No
DC System Voltage (VDC)	48
Battery Recharge Rate (Included Batteries)	1.7 hours from 10% to 90% (typical, full load discharge)
Voltage Regulation Description	Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
Overvoltage Correction	Input voltages between 127 and 145 are reduced by 12%
Undervoltage Correction	Input voltages between 108 and 96 are boosted by 12%
Severe Undervoltage Correction	Input voltages between 83 and 95 are boosted by 24%
Front Panel LCD Display	Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
Switches	3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
Alarm Cancel Operation	Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available
Audible Alarm	Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
EMI / RFI AC Noise Suppression	Yes
AC Suppression Joule Rating	570
AC Suppression Response Time	Instantaneous
Primary Form Factor	Rackmount
Rack Height	2U
Cooling Method	Fan
Installation Form Factors Supported with Included Accessories	2 post rackmount; 2-4 post front rail rackmount; 4 post rackmount short-depth; Tower; Wallmount
Installation Form Factors Supported with Optional Accessories	2 post rackmount; Wall-mount; 4 post short-depth racks; 2 or 4-post racks using front vertical rails only
Minimum Required Rack Depth (cm)	63.50
Minimum Required Rack Depth (inches)	25
Optional Mounting Accessory Notes	2-9USTAND enables upright tower UPS placement; 2POSTRMKITWM enables wall-mount and 2-post rackmount installation; 4POSTRAILKITWM enables installation in 4-post short-depth racks from 14.5 to 23.5 inches; UPSHDEARKIT enables installation in 2 or 4-post racks using front vertical rails only, without rear support.
Primary UPS Depth (mm)	494
Primary UPS Height (mm)	87
Primary UPS Width (mm)	440
Shipping Dimensions (hwd / in.)	8.40 x 23.80 x 21.70
Shipping Weight (kg)	35.83
UPS Housing Material	Steel
UPS Power Module Dimensions (hwd, in.)	3.43 x 17.32 x 19.46
UPS Power Module Weight (kg)	22.72
UPS Power Module Weight (lbs.)	50.1
Unit Dimensions (hwd / in.)	3.430 x 17.320 x 19.460
Unit Weight (lbs.)	50.100
Unit Weight (kg)	22.72
Mounting Details	Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm)
Operating Temperature Range	32° to 104°F (0° to 40°C)
Storage Temperature Range	5° to 122°F (-15° to 50°C)
Relative Humidity	0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load)	189
AC Mode Efficiency Rating (100% Load)	98%
Audible Noise	50.3 dBA maximum, front side 1m
Network Management Cards	WEBCARDLXE
Network Monitoring Port Description	Supports detailed monitoring of UPS and site power conditions
PowerAlert Software	Available via free download from https://tripplite.eaton.com/products/power-alert
Communications Cable	USB, DB9 and EPO cabling included
WatchDog Compatibility	Supports Watchdog application, OS and hard-reboot restart options for remote applications
Network UPS Tools (NUT) Compatibility	NUT compatible. See a full list of NUT compatible Tripp Lite UPS systems at https://networkupstools.org/stable-hcl.html?manufacturer=Tripp%20Lite
Network Management Card Description	Network management card optional
Communications Interface	DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled)
Transfer Time	5 milliseconds (AC to battery mode), 1 millisecond (Battery to AC mode)
Low Voltage Transfer to Battery Power (Setpoint)	83
High Voltage Transfer to Battery Power (Setpoint)	145
Cold Start (Startup in Battery Mode During a Power Failure)	Cold-start operation supported
High Availability UPS Features	Auto Probe Monitoring and Reboot (included); Automatic Voltage Regulation (AVR); Remote management; Surge/noise protection
Green Energy-Saving Features	Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
Grounding Details	Back panel grounding lug
UPS Applications	Large Network
Product Certifications	CSA (Canada); UL 1778
Product Compliance	RoHS; FCC Part 15 Class A (USA)
Product Warranty Period (Worldwide)	5-year limited warranty
Connected Equipment Insurance (U.S., Canada & Puerto Rico)	$250,000 Ultimate Lifetime Insurance

	Tripp Lite AVR550U 550VA 300W UPS: Features, Specifications, and Overview Detailed overview of the Tripp Lite AVR550U 550VA 300W Line-Interactive UPS, featuring 8 NEMA 5-15R outlets, AVR protection, USB connectivity, and compact desktop/wall-mount design for home and office.
	Tripp Lite SMART1000LCDTNC 1000VA 600W Line-Interactive UPS - Submittal Drawing and Specifications Detailed submittal drawing and dimensional specifications for the Tripp Lite SMART1000LCDTNC, a 1000VA 600W line-interactive UPS with cloud connectivity and remote monitoring. Includes front, top, side, rear, and bottom views with measurements.
	Tripp Lite SU3000RTXL2U SmartOnline UPS: 3kVA 2.7kW On-Line Double-Conversion Detailed specifications and features of the Tripp Lite SU3000RTXL2U SmartOnline 120V 3kVA 2.7kW On-Line Double-Conversion UPS, designed for mission-critical equipment protection, with expandable runtime and network management capabilities.
	Tripp Lite INTERNET600U Internet Office 120V 600VA 300W Standby UPS - Ultra-Compact Desktop with USB Detailed overview of the Tripp Lite INTERNET600U, a 600VA/300W ultra-compact standby UPS. Features include USB monitoring, TEL/DSL surge protection, 8 NEMA 5-15R outlets, ENERGY STAR qualification, and comprehensive specifications for power, battery, environmental, and warranty details.
	How to Replace the Battery in a 1U UPS System Technical training guide from Tripp Lite on how to safely replace the battery in a 1U UPS system, including important precautions and step-by-step procedures.
	Tripp Lite OMNIVSX850 850VA 480W Line-Interactive UPS with 6 C13 Outlets The Tripp Lite OMNIVSX850 is an 850VA/480W line-interactive UPS providing reliable battery backup and AC power protection for PCs, home theaters, and digital signage. It features AVR, 6 C13 outlets, an LCD touchscreen, and USB connectivity for automatic saves and shutdowns.
	Tripp Lite SMART2200RM2U SmartPro 2200VA UPS - Sine Wave, Line-Interactive Detailed specifications and features of the Tripp Lite SMART2200RM2U SmartPro Line-Interactive Sine Wave UPS. This 2U rack/tower UPS offers 2200VA/1920W capacity, automatic voltage regulation, multiple output receptacles, and advanced network management options.
	Tripp Lite AVR-Series UPS Systems Owner's Manual Comprehensive owner's manual for Tripp Lite AVR-Series UPS systems (AVR550U, AVR650UM, AVR700U, AVR750U, AVR900U), covering safety, installation, operation, features, and maintenance.