Hyundai HYAIRCO75LA Evaporative Cooler (7.5L, White)

Safety Warnings and Precautions

• Please read all instructions carefully before using this product.
• Before use, check that the operating voltage matches the voltage on the unit's label.
• This appliance can be used by children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning safe use and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Regularly check the power supply cord. If damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• Do not place the power supply cord under objects or cover it. Place the power supply cord properly to avoid tripping.
• Place the air conditioning fan on a flat and secure floor before use.
• When the fan is not in use, unplug the power supply cord. Hold the plug, do not pull the cord.
• Ensure the fan does not touch any obstructions while running.
• When the fan is running, do not put fingers or other objects into the air inlet and outlet. Pay extra attention if children are nearby to prevent them from playing with the fan.
• When the fan is running, do not place soft objects like hair and curtains close to the fan to avoid them getting caught.
• If the power cord or plug is damaged, or the fan is damaged due to falling, stop using the product.
• Do not use this fan outdoors. This product is for indoor use only.
• Do not use this fan in a humid place, such as a bathroom.
• Do not use this fan near a window or in direct sunlight.
• Do not use this fan with other semi-conductors.
• The fan cannot be used without its base and must be placed horizontally.
• Do not use this fan where gasoline, paint, or other flammable materials are stored.
• Unplug the power supply cord before cleaning, repairing, or moving the product.
• When the fan is not in use, unplug the power plug.
• Use this fan according to the User's Guide instructions.
• Do not disassemble the fan without permission. For repair, return it to the service center.
• The product should be kept clean and regularly maintained.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by a person responsible for their safety.
• To protect against electrical shock, do not immerse the unit, cord, or plug in water or other liquid.
• The appliance is only intended for the purpose described in the user manual. Do not use the appliance or any part of it outside its intended use to avoid risk.
• The use of attachments not recommended or sold by the manufacturer may cause injury.
• Unplug the appliance during filling and cleaning.
• Do not use an extension cord.

Features

1. Four speed levels: Silent, low, medium, high.
2. Working modes: normal wind, natural wind, and sleep wind.
3. Four timer settings: 1h, 2h, 4h, 8h.
4. Water shortage protection function.
5. Air outlet 0-65° swing.
6. The function status is indicated by an illuminated LED light, which darkens after one minute without operation.
7. Ultra-thin IR remote control (maximum 6m, left/right 30°).
8. Dry wind function.
9. Power failure memory function.
10. Touch button control function.
11. The product automatically shuts down after 15 hours of continuous operation.

Functions and Names of Product Components

Product overview

A diagram shows the components of the evaporative cooler. The numbered components are:

• 01: Top cover
• 02: Display panel
• 03: Remote control receiving window
• 04: Decorative ring
• 05: Outlet grille
• 06: Front shell
• 07: Casters
• 08: Remote control
• 09: Rear case
• 10: Rear screen
• 11: Winding frame
• 12: Water tank
• 13: Power supply cord

Operation panel

A diagram illustrates the operation panel with buttons for:

• ON/OFF: Power on/off
• TIMER: Timer settings (1h, 2h, 4h, 8h)
• COOLER HUMIDIFIER: Humidify function
• SWING: Swing function
• MODE: Mode selection (Normal wind, natural wind, sleep wind)
• SPEED: Wind speed control (High, medium, low, silent)

Product Installation and Usage

Installation method

1. Unpack the product and check for all instructions and accessories.
2. The unit can be used immediately after unpacking.

Use of function buttons

1. When the power is turned on, all indicators are off. The buzzer beeps twice, the air outlet rotates to 0°, and the system enters standby. If no button is pressed for 1 minute, the indicator light dims. Pressing a button again turns the indicator light on.
2. The unit can be operated via the control panel buttons:
   • On/off control: Pressing the “On/Off” button the first time activates normal wind mode and the air outlet extends. Pressing it again shuts down the fan, retracts the air outlet, and the fan enters standby. To completely turn off, remove the power plug. (Note: For product longevity, completely power off after use.)
   • Wind speed selection: After powering on, the fan defaults to normal wind mode. Press the “Speed” button to cycle through speeds: High → Medium → Low → Silent. The corresponding LED indicator lights up. (Note: When selecting low speed, the motor briefly runs at medium speed before settling to low.)
   • Wind mode selection: Press the “Mode” button to select normal wind, natural wind, or sleep wind. The corresponding LED indicator lights up.
3. Natural mode: The fan automatically adjusts to the air conditioner's settings. Wind speed changes periodically, distributing cool air evenly. (Note: In natural mode, the speed button is invalid, and the speed indicator will not light up.)
4. Sleep wind: The fan uses a soft air supply program adapted for sleep. Wind speed changes at intervals for a comfortable sleeping environment. High, medium, and low speeds are also available in sleep wind mode.
5. Timer setting: Press the “Timer” button to select 1, 2, 4, or 8 hours. If the LED is off, the timer is not set. After selection, the LED displays the set time, and the unit will automatically shut down after the elapsed time.
6. Swing function: Press the “Swing” button to make the fan swing left and right. Press again to stop the swing.
7. When the fan is in standby, all functions except timer and sleep wind retain their memory settings.

Repair and Maintenance

• Before cleaning, repairing, or maintaining, turn off the power and remove the plug.
• If excessive foreign matter or dust adheres to the rear mesh cover and air inlet wind wheels, the wind effect will be reduced. It is recommended to clean at least once every other month.
• Cleaning the unit:
  1. Turn off the power and remove the power cord. Unplugging the cord is crucial to prevent electric shock or mechanical damage during cleaning.
  2. Use ordinary detergent and a soft brush for cleaning. Do not use chemical agents.
• Cleaning the surface:
  1. Wipe the surface with a damp cloth. Do not rinse directly with water.
  2. Do not use corrosive detergents or solvents.
  3. Ensure the power switch is off and the power cord is unplugged before cleaning the body to prevent electric shock.
• Maintenance:
  1. If the product will not be used for an extended period, remove the power plug, package the product, and prevent dust from entering.
  2. Store in a dry and ventilated place after packaging.

Technical Parameters

Environmental Protection

☑ This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.