ROTHENBERGER's SUPERTRONIC 4SE offers fast and steady threading, cutting and de-burring up to 4 inches. The powerful, 2-speed, 1-1/2 hp. motor provides strong ...
Steel Pipe Equipment Hand Threaders Portable Power Threaders Accessories for Hand and Power Threaders Power Drives Compact Threading Machines COLLINS® High Performance Threading Machines Threading Accessories Machine Die Heads and Dies Roll Grooving Production Cutting Machines 26 27 28 29 30 31 34 3 35 39 39, 40 41 45 46 47 Whether on-site or in the shop, ROTHENBERGER machines make cutting, threading, and grooving in the gas, plumbing, and heating industries a snap! Cutting and threading up to 6" diameter steel pipe is no problem. No matter the application or size of the job, ROTHENBERGER has the right machine! 800.545.7698 www.rothenberger-usa.com 25 Hand Threaders SUPER CUT Ratchet Threader Quick Change Die Heads l Positive octagonal universal drive: Secure hold 3 l Long pipe guide Perfect centering Product Profile FEATURES l Convenient, lockable ratchet direction reversal l Secure hold with locking retainer: Simple insertion and removal of die heads l Slim, compact shape with excellent overall size; angle requirements of 22.5°: For difficult to reach positions l Offset lever: High leverage l Fits all ROTHENBERGER hand and electric threaders TECHNICAL DATA Precision thread cutting to approved standards · NPT dia. 1/4" 2" Precision Dies l High-quality tempered steel: Extremely long life l Optimized cutting geometry: Easy to start cut, excellent chip discharge SUPER CUT Deluxe Threading Kit 70905X Set includes ratchet handle, die heads, plastic case Description lb No. SUPER CUT Set, 1/2", 3/4", 1" NPT SUPER CUT Set, 1/2", 3/4", 1", 1-1/4" NPT SUPER CUT Set, 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" NPT SUPER CUT Set, 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" NPT for plastic-coated pipe Ratchet handle No. 1 1/4" - 1-1/4" Ratchet handle No. 2 1-1/2" - 2" Die Head Adapter for die heads up to 1-1/4" RONOL® Cutting Fluid, 6.7 oz (200 ml) 9.3 70903X 15.0 70901X 20.0 70905X 20.0 P70905C 4.0 70840X 4.0 71272 2.0 71273 0.8 65018 70614 Set includes SUPER CUT Ratchet Threader 1-1/4" (70840X), Quick Change die heads NPT (1/2" 70912X, 3/4" 70913X, 1" 70914X), SUPER 1-1/4" Steel pipe cutter (70040), Water Pump pliers 10" (70522), 14" Heavy Duty Pipe Wrench (70153), Teflon tape , plastic case Description SUPER CUT Deluxe Threading Kit lb 21.0 No. 70614 800.545.7698 www.rothenberger-usa.com 26 SUPERTRONIC 1000 Portable Compact Threader Lightweight yet durable, this portable power threader quickly produces 1/2", 3/4" or 1" threads. l Cutting head and motor are one unit: Compact size l Small head and die: Ideal for narrow spaces Portable Power Threaders l Ergonomic handle grip: Easy to hold 3 l Strong, fiberglassreinforced aluminum housing: Sturdy and lightweight l Direct seating with locking of tension ring: Die heads are held firmly in place Product Profile l Fast and steady productioFnEtAhTreUaRdEinSg up to 1" l Fast and steady production threading up to 1" l Electronic push-button forward/reverse control l Compact dimensions l Small head l Lightweight, easy to handle l Durable l Fiberglass-reinforced aluminum motor housing TECHNICAL DATA · NPT Diameter: · Motor: 1/2", 3/4", 1" 34 rpm, 5 axle 800.545.7698 www.rothenberger-usa.com Standard supply: SUPERTRONIC 1000, forged pipe clamp, precision dieheads, plastic case Description SUPERTRONIC 1000, 1/2", 3/4", 1" NPT RONOL® Cutting Fluid, 6.7 oz (200 ml) Forged Pipe Clamp, max. 1-1/4" lb 9.4 0.8 3.5 No. 71351 65018 71279 27 Portable Power Threaders SUPERTRONIC 2000 / SUPERTRONIC 2000 Economy Power Threader 3 l Hardened teeth and jaws on support arm: Secure grip in both turning directions l Large mechanism for switching direction: Reverses direction when thread is complete l Offset die head mounting: Allows threading close to walls Product Profile FEATURES l Quick and effortless production of safe precision threaded joints to approved standards l Compact dimensions: Allow for use in difficult to reach positions l Dust tight casing with sealed lubrication: Long lifespan, low maintenance l High reduction gears with spur wheel teeth; 7 parallel gear shafts, each ball bearing mounted: High, consistent power transmission level when fully loaded l Optimized gearing: High performance output with minimal energy consumption · Motor: · Threading Speed: TECHNICAL DATA 1010 W Universal, double insulated with VDE and CEE, interference free 15-25 rpm, 60 rpm rapid reverse l Direct seating with locking of tension ring: Die heads are held firmly in place Inserting the die heads Fits into tight spaces Gearing l Compact gear housing with excellent overall size: Ideal for difficult to reach positions (corners, shafts) Use with ROGROOVER SUPERTRONIC 2000 Set 1/2" 2" Set includes SUPERTRONIC 2000, forged pipe clamp (71280), ROFIX Adapter (71271), Precision Die Heads, plastic case SUPERTRONIC 2000 Economy Set 1/2" 1-1/4" Set includes SUPERTRONIC 2000 Economy, forged pipe clamp (71280), Precision Die Heads, plastic case Description lb No. SUPERTRONIC 2000 Economy Set 32.0 1/2", 3/4", 1", 1-1/4" NPT SUPERTRONIC 2000 Set 42.1 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" NPT SUPERTRONIC 2000 Set for plastic-coated pipe 42.1 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" NPT Mounting Kit for ROGROOVER 8.5 RONOL® Cutting Fluid, 6.7 oz (200 ml) 0.8 Forged Pipe Clamp, max. 2" 3.8 71021 71259L P71259C 56514 65018 71280 28 71259L 71021 800.545.7698 www.rothenberger-usa.com Accessories for Hand and Power Threaders Precision Die Heads and Dies For SUPERTRONIC 1000, 2000, 2000 Ecomony and SUPER CUT models. Feature enlarged shaving discharge chambers for faster threading, strengthened locking plate and precise die seating. Size 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" NPT 70907X 70908X 70912X 70913X 70914X 70915X 70849X 70850X For Plastic-coated pipe, NPT P70912C P70913C P70914C P70915C P70849C P70850C lb 1.3 1.3 1.5 1.5 2.0 2.3 3 5.5 6.0 71280 71279 71271 71273 800.545.7698 www.rothenberger-usa.com Precision Threading Dies Precision Dies Gentle first cut, extreme long life, 4 pieces/pack. Achieve optimal results with Original ROTHENBERGER threading fluid! Description 1/4" NPT 3/8" NPT 1/2" NPT 3/4" NPT 1" NPT 1-1/4" NPT 1-1/2" NPT 2" NPT RONOL® Threading Oil, 20.3 oz. (600 ml) lb 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.4 1.7 No. 70916X 70917X 70918X 70919X 70920X 70921X 70945X 70946X 65008 Forged Pipe Clamp For SUPERTRONIC 2000, SUPERTRONIC 2000 Economy, SUPERTRONIC 1000 Secure grip in both turning directions, prism toothed, and hardened. Description Clamp up to max. 2" Clamp up to max. 1-1/4" lb 3.8 3.5 No. 71280 71279 Adapters For SUPERTRONIC 2000 Fits small external octagonal die heads from 1/4" to 1-1/4". Model Monoblock adapter ROFIX Adapter with locking ring lb 2.0 2.3 No. 71273 71271 29 Power Drives MINI-COLLINS® Puts power back into power threading thread up to 2" pipe or conduit, 1" bolt or rod, in seconds! 00074 3 PNEUMATIC MINI-COLLINS® ROTHENBERGER's Pneumatic MINI-COLLINS weighs only 27 pounds and is the most portable air-powered threader available! l For complete safety in hazardous environments such as petroleum and chemical plants, mines or tunnels. l Reversible, non-sparking air motor develops 500 foot-pounds of torque in either direction l Cannot be damaged by overload, even when operated to point of stall 00078 00077 13158 30 00117 Product Profile FEATURES l Lightweight and engineered to go anywhere requires only 1-3/4" clearance for working in trenches, overhead, and in tight quarters where only hand tools could be used before l Convenient maintenance built-in fill plug eliminates disassembly of gearbox for oiling l Has the muscle to make any turning job easy tightens nuts, drives cable pullers, turns hoists and jacks, opens and closes valves, or drives up to 6" geared threaders l Shock-resistant handle and durable construction provide years of safe, dependable operation Threading Range: · Pipe or conduit · Bolt or rod · With adapters and geared threader Dimensions: · Overall length · Cord length · Motor Switches · On/Off · Directional TECHNICAL DATA MINI-COLLINS® PNEUMATIC MINI-COLLINS® 1/8" to 2" 1/4" to 1" 1/8" to 2" 1/4" to 1" 2-1/2" to 6" 2-1/2" to 6" 28" 80" 115V, 15 amp or 230V, 9 amp, universal AC-DC reversible, 50-60 Hz 27" -- Reversible air motor develops 500 ft/lbs, forward and reverse; requires 90-120 PSI (at 60-80 CFM) input pressure Deadman Forward, reverse Safety lever throttle (shuts off when released) Forward, reverse MINI-COLLINS® Power Drives and Accessories Description MINI-COLLINS® Drive, 115V Pneumatic Mini-COLLINS® Drive MINI-COLLINS® Drive, 230V Steel carrying case Safevise lb 27.0 29.0 27.0 5.0 5.0 No. 00074 00078 13950 00119 00077 Drop Head Adapters to drive ROTHENBERGER SUPER CUT (enclosed) RIDGID®* 00-R RIDGID®* 111-R RIDGID®* 12-R Square shaft 7/8" Square shaft 1" (for geared threader) Square shaft 1-1/4" lb No. 3.0 13158 3.5 00110 3.0 00111 No adapter needed 3.0 00116 4.5 00117 3.0 00118 800.545.7698 www.rothenberger-usa.com SUPERTRONIC 1SE Portable Compact Threader Product Profile FEATURES l For lighter jobs up to 1", the 1SE machine is the perfect solution for cutting, threading and deburring. With automatic die head and through-the-head oiling, the 1SE is the easy-to-use job site threader. · NPT · Motor Strength · Speed · Dimensions TECHNICAL DATA dia. 1/2" 1" 350 Watts, 1/2HP 52 rpm (No load) 15-3/4" x 12-1/2" x 12-5/8" (L x W x H) l Smooth action impact hammer chuck Pipes don't slip l Rear centering chuck: For axial alignment of the pipe l Spindle supported by sealed ball bearings: Low-wear and precise guiding l Dual-sided tool guide: Precise guiding Compact Threading Machines 3 l Automatic die head with through-the-head oiling: Easy to use l Ball detent dies: Quick and easy to change l Interior deburrer, snap in, 3-blade Burr-free work l Sturdy oil pump with high flow power and adjustable fluid quantities, filter system, integrated oil feed: Optimal lubrication and cooling l Large shavings collection trough: Easy to clean Die Head & Die Selection Chart Die Head Die Head Type Size Automatic 1/2" 1" No. 52091 NPT Die Size 1/2" 3/4" 1" Manual 1/4" 3/8" 89109 1/4" 3/8" Alloy No. 89120 89121 89119 Standard supply: 1SE machine with Automatic die head 1/2"-1" (52091), alloy dies (1/2"-3/4" NPT 89120 and 1" NPT 89121), safety foot switch Description SUPERTRONIC 1SE with Automatic die head / dies 1/2" 1" NPT Cutter Wheel lb No. 97.0 63002 0.5 04510 800.545.7698 www.rothenberger-usa.com 31 Compact Threading Machines SUPERTRONIC 2SE / ROPOWER 50R Portable Compact Threaders ROTHENBERGER's portable 2" threading machines offer fast and steady, precision threading, cutting, de-burring, and grooving. The powerful 750-watt (1 HP) motor provides strong turning power with consistent torque for swift, effortless production of accurate, standard pipe and bolt threads. The optional foldable, wheeled workbench makes transport easy, whether on site or in the workshop. Replacing the dies is fast and easy due to unique ball-detent feature. Impact hammer chuck with switchable jaws provides a firm grip through flexible adjustment and broad support. l Smooth action impact hammer chuck Pipes don't slip 3 l Rear centering chuck: For axial alignment of the pipe l Automatic die head with through-the-head oiling: Easy to use Automatic die head with quick adjustment of thread size, automatic thread lengths; finely adjustable thread depths without recentering. l Work spindle with closed bearings on both sides: Low-wear and precise guiding l Dual-sided tool guide: Precise guiding 3-cut internal reamer Low-wear, precise working spindle driven by enclosed ball bearings on both sides. 2SE Die Head & Die Selection Chart Die Head Die Head Type Size Automatic 1/2" 2" No. 52500 NPT Die Size 1/2" 3/4" 1" 2" Manual 1/4" 3/8" 00121 1/2" 2" 20162 1/4" 3/8" 1/2" 3/4" 1" 2" Alloy No. 89101 89102 89100 89101 89102 32 SUPERTRONIC 2SE The SUPERTRONIC 2SE uses quick-change dies with a ball-detent feature that makes aligning replacement dies in the die head fast and easy. The 2SE die head and dies are compatible with the SUPERTRONIC 4SE threading machine. Standard supply: 2SE machine with automatic die head 1/2"-2" (56265), alloy dies (1/2"-3/4" NPT 89101 and 1"-2" NPT 89102), safety foot switch, set of 4 legs, 1 gallon ROCOOL® oil (01922) Description SUPERTRONIC 2SE with automatic die head 1/2" 2" NPT Wheeled stand Mounting Kit for ROGROOVER Cutter Wheel lb No. 97.0 63004 70.0 56051 4.0 56511 04510 800.545.7698 www.rothenberger-usa.com l Ball detent dies: Quick and easy to change l Interior deburrer, snap in, 3-blade Burr-free work Compact Threading Machines Product Profile FEATURES l Motor double insulated: Work safer l Stable high torque motor: Constant power l Offset spindle lubrication: Easy to maintain l Geared oil pump with filter system and adjustable fluid level: Constant oil flow l Large plastic chip collection tray: Easy to clean l Machine slightly angled: Reduced oil consumption, oil moistening in pipe interior is avoided 3 TECHNICAL DATA · NPT: · Motor Strength: · Speed: · Dimensions: dia. 1/4" - 2" 750 watts (1 HP) 40 rpm (No load) 21" x 17" x 13" (L x W x H) l Sturdy oil pump with high flow power and adjustable fluid quantities, filter system, integrated oil feed: Optimal lubrication and cooling Optional l Wheeled folding stand (56051) Can be used anywhere; provides storage l Large plastic shavings collection trough: Easy to clean ROPOWER 50R The ROPOWER 50R uses RIDGID®*-compatible dies with the new quick-change ball detent feature. While other manufacturers' RIDGID®* style dies may be used in the 50R die head (56265), only ROTHENBERGER's dies snap into position. 50R Die Head & Die Selection Chart Die Head Die Head Type Size No. RIDGID® Compatible Dies NPT Die Alloy High Speed Stainless Size No. Steel No. Steel Automatic 1/2" 2" 56265 1/2" 3/4" 89162 00125 1" 2" 89163 00126 00218 00219 Manual 1/4" 3/8" 00121 1/4" 3/8" 56383 Standard Supply: ROPOWER 50R, Automatic die head 1/2"-2" (56265), alloy NPT dies (1/2"-3/4" 89162 and 1"-2" 86163, set of 4 legs, safety foot switch, 1 gallon ROCOOL® oil (01922) Description lb No. ROPOWER 50R with Automatic die head with NPT Alloy dies 1/2"-2" Wheeled folding stand Mounting kit for ROGROOVER Cutter Wheel 97.0 63005 70.0 56051 4.0 56511 04510 800.545.7698 www.rothenberger-usa.com 33 Compact Threading Machines SUPERTRONIC 4SE 4" Threading Machine Threading Head l Automatic die head: Ensures proper thread length and depth l Automatic oil feed: Provides ideal lubrication and cooling to maximize die life 3 l Self-centering pipe cutter: Quickly cuts pipe to length l Snap-lock internal, triple de-burring blade: Removes sharp edges l Oil-resistant power cable: Long life Product Profile FEATURES ROTHENBERGER's SUPERTRONIC 4SE offers fast and steady threading, cutting and de-burring up to 4 inches. The powerful, 2-speed, 1-1/2 hp. motor provides strong turning power with consistent torque for swift, consistent production of accurate pipe threads either on site or in the shop. Replacing the dies is fast and easy with the unique ball detent feature. The machine includes 2 automatic die heads, 3 sets of dies, safety foot switch, and set of 4 legs. l Easy access to all components: For quick repair l Ball detent feature: Allows quick and easy replacement of dies without removing the die head l Chuck jaws are quick and easy to change l Robust oil pump with flow adjustment and filter system: Keeps oil free of impurities TECHNICAL DATA · Dimensions 31" x 21" x 19" (L x W x H) · Weight: 232 lb. · Machine Capacity Pipe 1/2"-4" Bolt 3/8"-2" · Motor 1-1/2 hp, Universal Single Phase, 115 volt, 1140 Watt · Threading Speed 48/18 rpm (2 speed) 34 l Ball detent dies: Quick and easy to change l Large, plastic chip tray: Catches chips and is easy to clean Additional Features l Rear centering chuck: For correct axial alignment l Smooth action impact hammer chuck: Powerful, no-slip grip l Dual tool/feed slide with geared indexing l Strong, precise work spindle is guided on both sides by enclosed ball bearings l Safety foot switch: Stops motor in case of emergency Description SUPERTRONIC 4SE 1/2"- 4" Automatic die head 1/2"- 2" Automatic die head 2-1/2"- 4" Alloy Die Set 1/2"-3/4" NPT Alloy Die Set 1"- 2" NPT Alloy Die Set for Die Head 64350 only 2-1/2"- 4" NPT ROCOOL Thread Cutting Oil 1 gallon SUPERJACK Pipe Stand for 1/2"- 8" pipe ROGROOVER Mounting Kit for 4SE Cutter wheel Enclosed, wheeled cabinet Open wheeled stand (with tool tray) lb No. 232.0 18.0 18.0 2.0 2.0 3.0 63006 52500 64350 89101 89102 59912 8.0 01922 25.0 10640 9.0 56512 0.5 04510 16.5 E-239 56.0 00548A 800.545.7698 www.rothenberger-usa.com COLLINS® High Performance Threading Machines PANTHER® 300 1/8" to 2" Threading Machine This machine packs a real punch on the construction site! Quick, effortless production of precise, quality pipe and bolt threads. Drive Motor l Universal, 2-brush motor with powerful forward and reverse l 1/2 HP, 15 amp, 115 V, 60 Hz l Powerful reverse mode l Left & right hand optional l Easy to service No-Load Spindle Speed l 43 rpm Chucking System l Smooth-action impact hammer chuck, with replaceable jaw inserts, for a powerful no-slip grip l Self-centering rear chuck ensures correct alignment Pipe Cutter and Reamer l Self-centering pipe cutter l 5-blade conical reamer Die Heads & Dies l Uniquad® for pipe and bolt threading is standard on PANTHER® 300 and PANTHER®. l Snap-O-Matic® die head is optional for PANTHER® 300. l Right hand threading range: Pipe 1/8" to 2" Pipe with geared threader 6" maximum Bolt 3/8" to 2" l High speed steel precision dies are standard supply providing long life with excellent threading results Roll Grooving l Complete with rollers for steel pipe possessing a capacity 3 to groove l Optional brackets for ROTHENBERGER ROGROOVER and RIDGID® 916 Roll Groover Safety All units come with safety foot switch. Dimensions 41-1/4" x 16-1/4" x 42-5/8" (on tri-stand) Stands l Portable tri-stand is standard. l Foldable wheeled stand also available Oiling and Lubrication l Built-in, no-drip tray is easy to remove. l Rugged pump l Automatic oil feed for optimal lubrication and cooling of dies l Hand oiler option available Carriage Removable carriage assembly with extendable lever Description lb 115 V 50/60 Hz PANTHER® 300 with Snap-O-Matic® Die Head and Automatic oiler on collapsible wheel stand PANTHER® 300 with Uniquad® Die Head and hand oiler on Tri-stand PANTHER® 300 with Uniquad® Die Head and Automatic oiler on Tri-Stand PANTHER® 300 with Snap-O-Matic® Die Head and Automatic oiler on Tri-Stand PANTHER® Power Drive only (no cutter, carriage, reamer, oiling, oil tray, stand, die head or dies) Pneumatic PANTHER® Power Drive Heavy duty collapsible stand RIDGID®* style die head Uses RIDGID®-compatible dies Brackets for RIDGID®* 916 Roll Groover Mounting kit for ROGROOVER 248.0 198.0 215.0 222.0 105.0 105.0 75.0 10.0 4.0 4.0 05470 05450 05400 05410 05100 05405 05610 05600 22140 45003 05410 800.545.7698 www.rothenberger-usa.com 35 COLLINS® High Performance Threading Machines COLLINS® CLASSIC 22A This top-of-the-range threading machine is suitable for the most demanding pipework applications, on-site threading, prefabrication work, or even production applications. Completely versatile handles even difficult make-on or breakdown of fittings. High performance output in every way, the result from over 40 years producing the tried and tested COLLINS® pipe threaders. Drive Motor l Heavy duty, 115 V, universal AC/DC, 50/60 Hz. Develops up to 2.3/4 HP l 6 brush motor for higher torque l Easy to service l Left and right hand optional l 84db on A scale noise level 3 Pipe Cutter and Reamer l Precision pipe cutter with dual guide for accurate pipe cutting l 5-Blade conical reamer No-Load Spindle Speed l 72 rpm l Optional 54 and 100 rpm Die Heads l Snap-O-Matic® die heads (2) are standard l Simple, quick change of dies without time consuming adjustments l All controls are clearly marked. l Automatically adjusted thread length l Adjustable thread depth l Threading range: Pipe or conduit 1/8" to 2" Bolt or rod 1/4" to 2 1/4" l Uniquad® head optional HSS Precision Dies l Long operating life l Optimum cutting geometry and excellent chip discharge l Can be resharpened Pipe Chuck l COLLINS® SUPER GRIP chucking system l R/L chucking l 4 heavy duty jaws at both front and rear of machine ensure that pipe is automatically gripped and centered. l Easy to replace jaws for both metal and plastic-coated pipe l Optional jaws for plastic-coated pipe. Oiling and Lubrication l Rugged and proven oil pump l Automatic oil feed for optimum cooling l Large, easy-to-empty, chip tray l 1 gallon oil reservoir l Use ROCOOL® cutting oil, a special blend of sulfo-chlorinated mineral oil to ensure superior quality threads and long die life. Safety l All units come with a safety foot switch. Dimensions l 37-1/2" x 13-1/8" x 18-1/2" (L x W x H) l Carriage travel 11" Optional Stands l Open wheeled stand with tool tray l Closed wheeled stand with locking tool cabinet E-239 00579 on 00045 stand Standard Supply: Threading machine with built-in pipe cutter and reamer, foot-operated safety switch, die heads & dies, 1 gallon oil. Description COLLINS® CLASSIC 22A with Snap-O-Matic® die heads/dies, 115V Snap-O-Matic® die heads/dies, 100 rpm, 115V Snap-O-Matic® die heads/dies, 230V UNIQUAD® die heads/dies, 115V Automatic die heads/dies, 115V RIDGID® compatible automatic die heads/dies Automatic ball-detent die head/dies Basic 22A unit without die head/dies Replacement jaws (set 8) Low indent jaws for plastic-coated pipe (set 8) Reamer, 1/8"-2" conical, 5-blade Spare cutter wheel (1) Spare cutter wheel (6) Cutter assembly, wheel type Oil sump baffle Open wheeled stand with tool tray Threader storage cabinet with wheels Waterproof cover Mounting Kit for ROGROOVER Switch Assembly Switch Handle lb No. 240.0 240.0 240.0 240.0 240.0 240.0 240.0 220.0 5.5 5.5 6.0 0.3 1.0 11.0 4.0 54.0 165.0 5.0 7.0 10.0 0.3 00579 00587 00592 00596 00597 00575 00575A 00585 01623 20533 00160 00157 00158 00159 00155 00045 E-239 00154 45001 01297 1221-H 800.545.7698 www.rothenberger-usa.com 36 COLLINS® High Performance Threading Machines RHINO® 1/2" to 4" Threading Machine This is a top-quality threading machine for standard use by plumbing and electrical contractors. Drive Motor Automatic Die Heads Safety l Heavy Duty, 115 V, AC/DC 50/60 Hz. l Automatic 2-1/2" to 4" l All units come with safety foot switch. Develops up to 3 HP l Optional 1/2" to 2" automatic die head, l Cut-off switch to limit carriage travel l 6-Brush motor for higher torque small die head adapter and reamer l High speed threading 25 rpm l Easy to maintain and service l 85db max. noise level No Load Spindle Speed l 25 rpm l Automatically adjusted thread length l Threading range with optional package: Pipe or conduit 1/2" to 4" Bolt or rod 5/8" to 2-1/4" Optional Stands l Open wheeled stand with tool tray l Closed wheeled stand with locking tool cabinet Alloy Precision Dies l Superjack Pipe Stand with adjustable height and 2000 lb. capacity 3 l Long operating life Pipe Cutter and Reamer l Optimum cutting geometry and excellent l Precision pipe cutter with dual guide for chip discharge accurate pipe cutting and control for exact length required Oiling and Lubrication l 5-Blade conical reamer for 1/8" to 2" l Optional blade reamer for 2-1/2" to 4" l "Quick Shot" lubricating system l 2-gallon oil reservoir l Use ROCOOL® Cutting Oil, a special blend of Pipe Chuck sulf-chlorinated mineral oil assures long die l COLLINS® SUPER GRIP chucking system life and superior quality threads. l R/L chucking l 4 heavy duty jaws at both front and rear of machine ensure that pipe is automatically gripped and centered Standard Supply: threading machine with built-in pipe cutter, reamer, foot operated safety switch, 2-1/2"- 4" die heads & dies. Description lb No. RHINO® complete machine with 2-1/2" - 4" automatic die heads & dies RHINO® complete machine with 2-1/2" - 4" automatic die heads & dies for plastic-coated pipe RHINO® optional 1/2" - 2" package with 1/2" - 2" automatic die heads and dies with 1/2" - 2" conical reamer Reamer 1/8" to 2" conical, 5-blade reamer assembly 1/8" to 2" reamer cone only 2-1/2" to 4" twin-edged blade 2-1/2" to 4" reamer assembly Cutter assembly Spare cutter wheel (one only) Spare Cutter Wheel, 3 pk. Open wheel stand (with tool tray) Threader storage cabinet with wheels Mounting kit for ROGROOVER 340.0 340.0 27.0 5.5 5.5 5.0 5.0 40.0 1.0 1.0 56.0 165.0 14.0 00550 P00551C 00561 00097 01894 00107 00551 00106 00104 00105 00548A E-239 45004 Contact Factory for Special Voltages, Configurations, and Accessories. 800.545.7698 www.rothenberger-usa.com E-239 37 COLLINS® High Performance Threading Machines Product Profile TECHNICAL DATA · Range Pipe or conduit 1/2"-4" Bolt or rod 16-76 mm, 5/8"-3" · Dimensions 50" x 23" x 29" (L x W x H) Carriage travel 10" · Motor 3 Phase, Dual speed, 3 HP · Spindle speed 1/2" 2" 40 rpm while threading 2-1/2" 4" 16 rpm · Switches 3 · Starter Drum-type (high-low-off-release) Optional drum-type (right hand-left hand off) Manual with thermal overload · Oil Reservoir 5 gallon capacity 33A 4" THREAD-O-MATIC® Standard unit with three Dual (1/2"-3/4", 2 1/2"-3", and 3 1/2"-4") and one Quad (1"-2") Snap-O-Matic® die heads and NPT High Speed dies. Includes small die head adapter and 1/2"-2" cone reamer assembly. The motor and controls are above-the-base for mounting the machine on a workbench or an OPTIONAL welded steel stand. Description 33A Thread-O-Matic® Stationary stand with cabinet lb 680.0 175.0 No. 00068 00170 Product Profile TECHNICAL DATA · Range Pipe or conduit 1/2"- 4" Bolt or rod 19-76 mm, 5/8"- 3" · Dimensions 60" x 30" x 44-1/2" (L x W x H) Height to center line of spindle 35-1/2" Carriage travel 13" · Motor 5 H.P, 230/460V 3 phase, 50-60 Hz 1170 rpm (instant reversing) Optional 5 H.P, 230/460V 1 phase, 50-60 Hz 1170 rpm Optional 10 HP, 230/460V, 3 phase, 50-60 Hz, 1800 rpm · Spindle speed while threading 1/2"-1" 1-1/4"-2" 2-1/2"-3" 3-1/2"-4" 48 rpm 26 rpm 16 rpm 12 rpm · Switches Three-station push button switch (forward-stop-release) Optional toggle type (right hand-left hand) · Starter Magnetic with thermal overload · Oil Reservoir 5 gallon capacity 44A 4" THREAD-O-MATIC® Top-of-the-line high production unit with three Dual (1/2"-3/4", 2-1/2"-3", and 3-1/2"-4") and one Quad (1"-2") Snap-O-Matic® die heads and NPT High Speed dies. Includes small die head adapter and 1/2"-2" cone reamer assembly. The 44A's heavy duty construction includes welded steel plate frame and base. Description 44A Thread-O-Matic® 38 lb 1212.0 No. 00039 800.545.7698 www.rothenberger-usa.com COLLINS® High Performance Threading Machines 66A 6" THREAD-O-MATIC® Standard unit with one Quad (1"-2"), two Dual (2-1/2"-3", 3-1/2"-4", and two Mono (5"-6") Snap-O-Matic® die heads and NPT High Speed dies. Includes small die head adapter, 1/2"-2" cone reamer assembly, and 1/2"2" wheel-type cutter assembly. Engineered with the same heavy duty construction as the 44A, the 66A features a welded steel plate frame and base. Product Profile TECHNICAL DATA · Range Pipe or conduit 1" 6" Bolt or rod 32-90 mm, 1-1/4" 4" · Dimensions 48-3/8" x 30" x 45-3/4" (L x W x H) Height to center line of spindle 36-3/4" Carriage travel 10" · Motor 5 HP, 230/460V 3 phase, dual-speed, 50-60 Hz 1170 rpm (instant reversing) · Spindle speed 1/2" 2" 62 rpm while threading 2-1/2" 3" 32 rpm 3-1/2" 4" 16 rpm 5" 6" 11 rpm 3 · Switches Three-station push button switch (forward-stop-release) Optional toggle type (right hand-left hand) · Starter Magnetic with thermal overload · Oil Reservoir 5 gallon capacity Description 66A THREAD-O-MATIC® lb 1700.0 No. 00174 Nipple Chucks 1/2" - 2" Nipple chucks convert unthreaded or short pipe lengths into useful close-threaded nipples For 1/2" - 2" pipe -- up to schedule 40 Faster and more economical to use than nipple chuck adapter systems 2-1/2" to 4" and 5" to 6" Patented mechanism expands and self-locks pipe from inside for work on short pipe lengths 2-1/2" - 4" pipe nipple chuck assembly 5" to 6" nipple chuck assembly can be used on both conduit and pipe 00072 00073 800.545.7698 www.rothenberger-usa.com Description lb No. For use with PANTHER, 1SE, 2SE, 50R, 4SE: NIPPLE MAX Set, 1/2" - 2", with case 16.0 For use with RHINO®, 22A, 33A, 44A, 66A: 20.0 NIPPLE MAX Set, 1/2" - 2", extension bar, carry case External Nipple Chuck, 1/2" - 2" Sch. 80 pipe 15.0 For use with 33A, 44A, 66A: Nipple Chuck Assembly for 2-1/2"- 4" pipe 43.0 Nipple Chuck Assembly for 2-1/2"- 4" conduit 50.0 For use with 66A: Nipple Chuck Assembly for 5"- 6" 50.0 Nipple Chuck, 1/2" 0.9 Nipple Chuck, 3/4" 1.2 Nipple Chuck, 1" 1.6 Nipple Chuck, 1-1/4" 2.2 Nipple Chuck, 1-1/2" 2.6 Nipple Chuck, 2" 4.3 00088 00089 01850 00072 00098 00073 00184 00185 00186 00187 00188 00189 39 Threading Accessories 3 65008 65013 RONOL® High-performance cutting oil l Mineral oil basis For threading of all materials, including stainless steel Mineral-based threading oils may not be permissible in drinking water installations -- Please check the pertinent standards in your area. Description Contents lb No. RONOL® Spray RONOL® Spray can 6.8 oz. (200 ml) 20.3 oz. (600 ml) 0.6 65018 1.7 65008 RONOL® SYN High-performance cutting fluid l No mineral oils, purely synthetic: Developed and approved for drinking water and plumbing installations. Description Contents RONOL® SYN Spray can 20.3 oz. (600 ml) lb No. 1.7 65013 ROCOOL® Cutting Oil Special blend of sulfo-chlorinated mineral oil assures long die life and superior quality threads. ROCOOL® cutting oil and automatic through-the-die-head oil flow makes it impossible to cut a dry thread. 10640 40 10641 Ball Transfer Head Description lbs No. ROCOOL® Cutting Oil (1 gallon) ROCOOL® Cutting Oil (six 1 gallon containers) ROCOOL® Cutting Oil (5 gallons) ROCOOL® Cutting Oil (55 gallons) 8.0 48.0 40.0 480.0 01922 00001 00002 00003 Safety Foot Switch For all ROTHENBERGER threading machines. Corresponds to industrial associations' safety and accident requirements, with oil-proof rubber cable and plug. Model 3 step, with emergency stop switch, 115V lb 5.0 No. 00161 SUPERJACK Pipe Stands Supports full lengths of pipe, 1/2"-8", when using pipe threading machines l Height capacity: 27"-50" l Weight capacity: 2,500 lb. max l Folding stand includes carrying handle Model lb No. SUPERJACK with V-Head 25.0 SUPERJACK with Ball Transfer Head 29.0 Folding SUPERJACK with V-Head 26.0 Folding SUPERJACK with Ball Transfer Head 30.0 10640 00101 10641 10642 800.545.7698 www.rothenberger-usa.com Machine Die Heads & Dies Product Profile FEATURES Die heads for PANTHER® 300, COLLINS® CLASSIC 22A, 1SE, 2SE, 50R, 33A, 44A, and 66A provide a unique combination of features resulting in top-of-the-line production machines for professionals. Pipe and bolt machine dies made of high-speed steel can be resharpened for longer die life. Expert die grinding ensures consistent high quality and long lasting dependability. · All Uniquad® and Snap-O-Matic® die heads feature automatic "through-the-head" oiling. · All die heads are Snap-O-Matic® (except Uniquad® die head #00022) an exclusive system that allows fast and consistent die settings in under three seconds. · No need to locate alignment markings simply move lever and pin from one slot to another sizing is automatic. PANTHER®, 00063 COLLINS® CLASSIC 22A Snap-O-Matic® Die Heads and Dies Snap-O-Matic® Die Head 3 Available in two-position or four-position settings up to 2". See following pages for the right part number for use with your machine. Description Die Head, NPT Dies, NPT Dies, NPT Stainless Die Head, NPSM Dies, NPSM Dies, Plastic 1/8" 00061 00029 00225 00202 00303 1/4" & 3/8" 00062 00030 00226 00201 00304 1/2" & 3/4" 00063 00031 00227 00200 00302 02265 1" & 1-1/4" 00064 00023 00053 1-1/2" & 2" 00065 00024 00054 1" - 2" 00066 00028 00203 00301 02391 lb 10.0 1.0 1.0 10.0 1.0 1.0 Automatic Opening Pipe Die Heads and Dies Description Die Head Dies, NPT Dies, NPSM 1/2" & 3/4" 00221 00027 00300 00221 Special die head cuts pipe thread lengths the same, time after time -- a hardened steel trip trigger automatically opens at the desired or standard thread length. Single-lever motion sizes and closes the die head. The trigger can be swiveled out of position for long-running threads. Available for die sizes 1/2" 3/4" or 1" 2". 1" & 1-1/4" 00221 00023 00301 1-1/2" & 2" 00221 00024 1" - 2" 00221 00028 lb 10.0 1.0 1.0 Uniquad® Pipe Die Heads and Dies 00222 Uniquad® Die Head: Fully adjustable, truly versatile die head for up to 2" pipe and 2-1/4" bolt. Sizing is manual, but still a simple operation. For threading pipe Uniquad® heads use four sets of interchangeable high-speed steel dies: 1/8", 1/4" 3/8", 1/2" 3/4", or 1" 2" Description Die Head Dies, NPT Dies, NPT Stainless Dies, NPSM Dies, Plastic 1/8" 00222 00025 00050 00303 02581 1/4" & 3/8" 00222 00026 00051 00304 02582 1/2" & 3/4" 00222 00027 00052 00300 02583 1" & 1-1/4" 00222 00023 00053 1-1/2" & 2" 00222 00024 00054 1" - 2" 00222 00028 00301 02391 lb 10.0 1.0 1.0 1.0 1.0 800.545.7698 www.rothenberger-usa.com 41 Machine Die Heads & Dies PANTHER®, COLLINS® CLASSIC 22A, continued Uniquad® Bolt Die Heads and Dies Uniquad® Die Head: Fully adjustable, truly versatile die head for up to 2" pipe and 2-1/4" bolt. Sizing is manual, but still a simple operation. For threading bolt Uses either left-hand or right-hand dies to 2-1/4". Description Die Head Dies, UNC Dies, UNF Description 3 Die Head Dies, UNC Dies, UNF 1/4" 00222 00004 00340 5/16" 00222 00005 00341 3/8" 00222 00006 00342 7/16" 00222 00007 00343 1/2" 00222 00008 00344 9/16" 00222 00009 00345 5/8" 00222 00010 00346 3/4" 00222 00011 00347 7/8" 00222 00012 00348 1" 00222 00013 00349 1-1/8" 00222 00014 00350 1-1/4" 00222 00015 00351 1-3/8" 00222 00016 00352 1-1/2" 00222 00017 00353 1-5/8" 00222 00018 00354 1-3/4" 00222 00019 00355 1-7/8" 00222 00020 00356 2" 00222 00021 00357 2-1/4" 00222 00022 lb 10.0 1.0 1.0 lb 10.0 1.0 1.0 RHINO®, 4SE, 2SE, and 1SE Automatic Opening Pipe Die Heads and Dies Manual NPSM Pipe Die Heads and Dies. Manual die heads for parallel NPSM pipe threads from 1/2" - 3". 52500 High Performance Automatic die heads with quick Snap-O-Matic® type size selection open automatically at the desired or standard thread length. Depth of thread can be adjusted for individual sizes and moves the die head position for long-running threads. Description Die Head, NPT, Manual Dies, NPT, Alloy Die Head, NPT Die Head, NPT Dies, NPT, Alloy Die Head, NPT Dies, NPT, Alloy Die Head, NPSM, Manual Dies, NPSM, Alloy Use on 1SE 1SE 1SE 2SE, 4SE, RHINO® 2SE, 4SE, RHINO® 4SE, RHINO® 4SE, RHINO® 2SE, 4SE, RHINO 2SE, 4SE, RHINO Note: alloy dies are not resharpenable. 1/4" 20165 89100 3/8" 20165 89100 1/2" 89120 52091 89101 20171 89148 3/4" 89120 52091 89101 20171 89148 1" 89121 52091 52500 89102 20171 89149 1-1/4" 52091 52500 89102 20171 89149 1-1/2" 52091 52500 89102 20172 89150 2" 52091 52500 89102 20172 89150 2-1/2" 64350 59912 20172 89151 3" 64350 59912 20172 89151 4" lb 11.0 1.0 18.0 18.3 1.0 64350 20.8 59912 3.0 20.0 3.0 RIDGID®* Style Universal "R" Series Die Head Description Die Head, 50R Automatic Die Head, 50R Manual Die Head, PANTHER® Manual Dies, NPT, Alloy Dies, NPT, High Speed Steel Dies, NPT, Stainless 1/4" - 3/8" 00121 05600 56383 Universal "R" Series Die Head Will accept "R"-style dies from 1/8" 2" NPT for the PANTHER and ROPOWER 50R 1/2" - 3/4" 56265 05600 89162 00125 00218 1" - 2" 56265 05600 89163 00126 00219 lb 8.5 14.0 10.0 1.0 5.0 1.0 800.545.7698 www.rothenberger-usa.com 42 2SE and 50R for Bolt Threads Manual Opening Die Head and Dies Description Die Head Dies, UNC, Alloy 1/2" 20160 89016 5/8" 20160 89017 3/4" 20160 89018 Machine Die Heads & Dies Manual Die Head for bolt threading up to 1" on 2SE and ROPOWER 50R machines 7/8" 1" 1-1/8" - 1-1/4" 1-3/8" - 1-1/2" lb 20160 20160 20162 20162 8.5 89019 89020 89197 89198 1.0 33A and 44A Thread-O-Matic Snap-O-Matic® Pipe Die Heads and Dies 3 Large Snap-O-Matic® Die Head Available in two-position in 2-1/2" - 4" for 33A and 44A. 00066 Description Die Head, NPT Dies, NPT Dies, NPT Stainless Die Head, NPSM Dies, NPSM Dies, Plastic 1/2 & 3/4" 00063 00031 00227 00200 00302 02265 1" & 1-1/4" 00064 00023 00053 1-1/2" & 2" 00065 00024 00054 1" - 2" 00066 00028 00203 00301 02391 2-1/2" - 3" 00055 00041 00047 00205 00305 02364 3-1/2" - 4" 00057 00042 00048 00207 00306 06676 lb 35.0 5.0 5.0 35.0 5.0 5.0 Uniquad® & Snap-O-Matic® Bolt Die Heads & Dies Description Die Head Dies, UNC Dies, UNF Description Die Head Dies, UNC Dies, UNF Die Head Bolt Dies, UNC RH only 5/8" 00222 00010 00346 3/4" 00222 00011 00347 7/8" 00222 00012 00348 1" 00222 00013 00349 1-1/8" 00222 00014 00350 1-1/4" 00222 00015 00351 1-3/8" 00222 00016 00352 1-1/2" 00222 00017 00353 1-5/8" 00222 00018 00354 1-3/4" 00222 00019 00355 1-7/8" 00222 00020 00356 2" 00222 00021 00357 2-1/4" 00222 00022 2-1/2" 00223 00223 00330 2-3/4" 00223 00223 00331 3" 00223 00223 00332 lb 10.0 1.0 1.0 lb 10.0 1.0 1.0 10.0 1.0 800.545.7698 www.rothenberger-usa.com 43 Machine Die Heads & Dies 66A Thread-O-Matic Snap-O-Matic® Pipe Die Heads and Dies Large Snap-O-Matic® Die Head Available in two-position up to 4" and single position for 5" and 6" Description Die Head, NPT Dies, NPT Dies, NPT Stainless Die Head, NPT Dies, NPT 3 Dies, NPT Stainless Die Head, NPT Dies, NPT Dies, NPT Stainless Die Head, NPSM Dies, NPSM Die Head, NPSM Dies, NPSM Die Head, NPSM Dies, NPSM 00059 1" - 1-1/4" 00064 00023 00053 1-1/2" - 2" 00065 00024 00054 1' - 2" 00066 00028 00203 00301 2-1/2" - 3" 00056 00041 00047 00206 00305 3-1/2" - 4" 00058 00042 00048 00208 00306 5" 00059 00043 00049 00204 00307 6" 00060 00043 00228 00209 00307 lb 10.0 1.0 1.0 35.0 5.0 5.0 54.0 6.0 6.0 10.0 1.0 35.0 5.0 54.0 6.0 Uniquad® Pipe Die Heads & Dies 00222 Uniquad® Die Head Fully adjustable, truly versatile die head for up to 2" pipe and 2-1/4" bolt. Sizing is manual, but still a simple operation. For threading pipe Uniquad® head uses four sets of interchangeable high-speed steel dies: 1/8", 1/4" 3/8", 1/2" 3/4", 1" 2". Description Die Head Dies, NPT Dies, NPT Stainless Dies, NPSM 1" - 1-1/4" 00222 00023 00053 1-1/2" - 2" 00222 00024 00054 1" - 2" 00222 00028 00301 lb 10.0 1.0 1.0 1.0 Automatic Opening Pipe Die Heads & Dies Description Die Head Dies, NPT Dies, NPSM 1" - 1-1/4" 00221 00023 00221 Special die head cuts pipe thread lengths the same, time after time -- a hardened steel trip trigger automatically opens at the desired or standard thread length. Single-lever motion sizes and closes the die head. The trigger can be swiveled out of position for long-running threads. Available for die sizes 1/2" 3/4" or 1" 2". 1-1/2" - 2" 00221 00024 1" - 2" 00221 00028 00301 lb 10.0 1.0 1.0 800.545.7698 www.rothenberger-usa.com 44 66A Die Head & Dies, continued Uniquad® Bolt Die Heads & Dies 00222 Machine Die Heads & Dies Uniquad® Die Head Fully adjustable, truly versatile die head for up to 2" pipe and 2-1/4" bolt. Sizing is manual, but still a simple operation. For threading bolt Uses either left-hand or right-hand dies to 2-1/4". Description Die Head Dies, UNC Dies, UNF 1-1/4" 00222 00015 00351 1-3/8" 00222 00016 00352 1-1/2" 00222 00017 00353 1-5/8" 00222 00018 00354 1-3/4" 00222 00019 00355 1-7/8" 00222 00020 00356 2" 00222 00021 00357 2-1/4" 00222 00222 lb 10.0 1.0 1.0 Snap-O-Matic® Bolt Die Heads & Dies Description Die Head, Bolt 66A Dies, UNC Right Hand only 2-1/2" 00224 00330 2-3/4" 00224 00331 3" 00224 00332 3-1/4" 00224 00333 3-1/2" 00224 00334 3-3/4" 00224 00335 4" 00224 00336 3 lb 35.0 5.0 Grooving and Beveling Die Heads & Tools Size 3/4" - 2" 22A, 33A, 44A 1" - 2" All Units 2-1/2" - 3" 33A, 44A 2-1/2" - 3" 66A 3-1/2" - 4" 33A, 44A 3-1/2" - 4" 66A 5" - 6" 66A Head 00471 00470 00472 00475 00473 00476 00474 Centering Dies 00489 00488 00490 00490 00491 00491 00492 Grooving & Cutting Bit Cutting Only Double Bevel 45 00477 (Sch. 40 & 80) 00477 (Sch. 40 & 80) 00482 (Sch. 40 & 80) 00482 (Sch. 40 & 80) 00482 (Sch. 40 & 80) 00482 (Sch. 40 & 80) 00482 (Sch. 40 & 80) 00478 (Sch. 40 & 80) 00478 (Sch. 40 & 80) 00483 (Sch. 40, 80, 160) 00483 (Sch. 40, 80, 160) 00483 (Sch. 40, 80, 160) 00483 (Sch. 40, 80, 160) 00483 (Sch. 40, 80, 160) 00480 (Sch. 40 & 80) 00480 (Sch. 40 & 80) 00486 (Sch. 40) 00486 (Sch. 40) 00486 (Sch. 40) 00486 (Sch. 40) 00486 (Sch. 40) Double Bevel 37-1/2" 00479 (Sch. 40 & 80) 00479 (Sch. 40 & 80) 00484 + 00485 (Sch. 40) (Sch. 40 - 160) 00484 + 00485 (Sch. 40) (Sch. 40 - 160) 00484 + 00485 (Sch. 40) (Sch. 40 - 160) 00484 + 00485 (Sch. 40) (Sch. 40 - 160) 00484 + 00485 (Sch. 40) (Sch. 40 - 160) Saran Tools 00481 (Sch. 40) 00481 (Sch. 40) 00487 (Sch. 40) 00487 (Sch. 40) 00487 (Sch. 40) 00487 (Sch. 40) 00487 (Sch. 40) 800.545.7698 www.rothenberger-usa.com 45 Roll Grooving ROGROOVER 6" Portable rolling groover for standard and thin-walled steel pipes up to 6" (150 mm). Particularly suitable for installations, sprinkler systems, larger heating units, and in industrial use, as well as for quick connection of pipes anywhere welding is not allowed. Lightweight and compact design. l Ratchet drive R/L for adjusting the depth of standard-conforming groove: Convenient, easy and fast l Allen key mount: 3 Always on hand l Lightweight aluminum casing: Easy to transport l Spacer for standard groove depths: Adjustable and finely-controlled arrester for consistent groove depth l Easy assembly/dismantling of the case-hardened and knurled pressure and drive rollers: Long life For Model ROGROOVER, machine ONLY Please select correct mounting kit below: ROPOWER 50R and SUPERTRONIC 2SE SUPERTRONIC 2000 COLLINS® CLASSIC 22A RIDGID®* 300 PANTHER® RHINO® SUPERTRONIC 4SE lb 27.9 No. 8870922 8.5 56511 8.5 56514 8.5 45001 8.5 45002 8.5 45003 8.5 45004 9.0 56512 800.545.7698 www.rothenberger-usa.com 46 Production Cutting Machines COLLINS E-Z CUTTER® The fastest 100 pound machine you can buy! This fast, high-volume, production cutter makes quick work of 1/4"- 4" pipe and 5/8"- 4-1/2" tubing. The E-Z Cutter® is built to withstand everyday knocks and abuses yet light enough to set up anywhere. Product Profile FEATURES l Universal AC/DC motor provides a full 1/2 HP for all-day production needs l Gear-driven rollers turn the work for true perpendicular cutting l Ball-bearing assembled cutter wheel revolves freely for even wear 3 l High-speed tool-steel cutter wheels provides thousands of cuts with no external burr so clean that no further finishing is needed before applying fittings l Foot switch provides operator safety while freeing both hands for highvolume production demands TECHNICAL DATA · Range · Dimensions · Drive Type · Cutter Wheel · Motor Pipe 1/4"- 4" I.D. Tubing 5/8"- 4-1/2" O.D. 19" x 10" x 19" (L x W x H) Gear-driven rollers Heat-treated, high-speed tool steel 1/2 HP Universal AC/DC, 50-60 Hz Optional 230V motor Model C on optional stand (00037) All models include a heavy-duty footswitch and one pipe cutter wheel. Description lb No. E-Z CUTTER® Model A, 115V E-Z CUTTER® Model A, 230V 121.0 121.0 00032 00533 E-Z CUTTER® Model C, 115V 125.0 00033 E-Z CUTTER® Model C, 230V 125.0 00534 C versions include two heavy-duty rollers and two stationary supports Steel pipe cutter wheel 1.0 For galvanized, black, and stainless steel Copper tube cutter wheel 1.0 Soil pipe cutter wheel 1.0 Plastic pipe cutter wheel 1.0 Stationary support 3.0 E-Z CUTTER® stand 40.0 Roller bearing support 3.0 Pipe support fitting 1.0 Foot switch, 115V 8.0 Foot switch, 230V 8.0 00034 00035 00535 00536 00036 00037 00069 00071 00079 02350 Turn your E-Z CUTTER® into a complete production system with these timesaving accessories: FOR BENCH MOUNTING: l Stationary Support #00036 mounts your 1-1/4" support pipe to the workbench surface l Roller Bearing Support #00069 slides onto the support pipe and provides easy travel and rotation of work. FOR FLOOR MOUNTING: l E-Z CUTTER® Stand #00037 bolts to the floor for stationary support l Pipe Support fitting #00071 (with 1" pipe legs) mounts onto 1-1/4" pipe also using the Roller Bearing Support on support pipe l Pipe Jack with Ball-Bearing Transport Head #00101 replaces system of support pipe and fittings, providing a handy alternative for supporting the work. 800.545.7698 www.rothenberger-usa.com 47 Notes 3 800.545.7698 www.rothenberger-usa.com 48