How to Set Up Steel Base Frame for Box Spring
Full / Queen / King / Cal King
About Alwyn Home
Alwyn Home is a global design company committed to bringing delight & ease to your every day by creating fine quality home furnishing essentials. They are user-centric in principle, innovative in function, conscious in sourcing, and approachable in prices.
Whether you're a fresh graduate, a couple combining homes, a work-from-homer, or someone who views their home exclusively for rest, Alwyn Home focuses on making your moments at home just right.
They travel the world searching for ingenious industry experts and fine quality materials to bring you thoughtfully-designed and consciously-made products essential for a mellow lifestyle.
Home Designs Made Easy
- ? Free Shipping Always
- ⚙️ Ready & Easy to Set Up
- ? Accessible Price Range
Designs Made With You In Mind
- ? Human-Centered Design
- ? Functions That Delight
- ? Safe Sourcing Practices
Parts List
Team assembly recommended ?.
| Part | Description | Quantity |
|---|---|---|
| A | Long frame pieces | 2 pcs |
| B | Corner connectors | 4 pcs |
| C | Mid-frame support pieces | 3 pcs |
| D | Mounting brackets | 1 set |
| Screws | Assembly screws | (Various quantities implied by steps) |
Note: Specific screw quantities are detailed in the assembly steps.
Assembly Instructions
Step 1: Unfold two Part A pieces. [Diagram: Two long bars (A) are shown partially unfolded, with arrows indicating outward motion.]
Step 2: Connect Part B (corner connector) to the end of a Part A piece. Ensure it clicks into place. Insert and tighten screws. [Diagram: A square tube connector (B) slides onto the end of a bar (A). A small inset shows two screws being tightened with a checkmark ✔️.]
Step 3: Connect another Part A piece to the other side of Part B. Ensure it clicks into place. Insert and tighten screws. [Diagram: Another bar (A) connects to the other side of the corner connector (B). A small inset shows two screws being tightened with a checkmark ✔️.]
Step 4: Unfold three Part C pieces. [Diagram: Three sets of bars (C) are shown partially unfolded, with arrows indicating outward motion.]
Step 5: Connect a Part C piece to the designated slot on Part A. Ensure it clicks into place. Insert and tighten screws. [Diagram: A bar (C) connects to a slot on the assembled A-B-A structure. A small inset shows three screws being tightened with checkmarks ✔️.]
Step 6: Connect another Part C piece to the designated slot on Part A. Ensure it clicks into place. Insert and tighten screws. [Diagram: Another bar (C) connects to the assembled structure. A small inset shows three screws being tightened with checkmarks ✔️.]
Step 7: Attach Part D (mounting brackets) to the frame using screws. [Diagram: A bracket (D) is shown being attached to the frame with screws. A small inset shows the bracket being secured with two screws and checkmarks ✔️.]
Step 8: Place the box spring and then the mattress onto the assembled steel base frame. [Diagram: A box spring is shown resting on the assembled metal frame, followed by a mattress placed on top of the box spring.]
Safety Warnings
⚠️ WARNING: Remove mattress and all other objects while moving the assembled unit.
?? CHOKING HAZARD: Small parts. Not intended for children.
✋ PREVENT HAND INJURIES: Please use caution when assembling. Avoid placing fingers between frame structure while unfolding.
