Singsation Rhapsody Quick Start Guide

Step 1: Unpack

Make sure the following items came in this package:

• Singsation Rhapsody All-In-One Karaoke System
• Microphone with Cable
• Charging Cable
• Remote Control

Step 2: Charge the Speaker

Plug one end of the charging cable into the [DC 5V jack] on the front of the speaker. Plug the other end into a USB charging adapter (not included).

The indicator light next to the [ECHO dial] turns red while the speaker is charging.

Diagram description: The front panel of the speaker shows various ports and controls, including the [DC 5V jack] and the [ECHO dial] with an indicator light.

Step 3: Plug In the Mic

Plug the microphone cable into the [MIC jack] on the front of the speaker.

Diagram description: The front panel of the speaker highlights the [MIC jack].

Step 4: Remove the Remote Battery Tab

Pull the battery tab out of the bottom of the remote. The battery will start powering the remote.

Diagram description: A remote control is shown with a numeric keypad and an arrow pointing to the battery tab at the bottom, indicating it should be pulled out.

Step 5: Turn On the Speaker

Turn the [ON-OFF/Volume dial] on the front of the speaker to the ON position to turn it on. This dial also adjusts the speaker's volume.

The speaker announces "Pairing."

Note: When the [ON-OFF dial] is in the ON position, the [Power button] on the remote can be used to turn the speaker on and off.

Diagram description: The front panel of the speaker shows the [ON-OFF/Volume dial].

Step 6: Pair With the Speaker

Ensure your phone's Bluetooth is turned on. Select "Singsation SPKA24" from the available devices to pair with the speaker.

The speaker announces "Device connected" when pairing and connection are complete.

Note: The process for enabling Bluetooth and connecting varies by device. Refer to your device's owner's manual for specific instructions.

Diagram description: A smartphone screen displays Bluetooth settings, with the Bluetooth toggle switched ON and "Singsation SPKA24" listed as a device.

If a phone or other Bluetooth device was previously paired, the Rhapsody will automatically attempt to reconnect. To pair a new device, turn off Bluetooth on the already paired device. The speaker will announce "Pairing."

Step 7: Start Playing Music

Turn your phone's volume up to 75%.

Start playing music on your phone.

Diagram description: A smartphone screen shows a volume slider adjusted to a high level.

Step 8: Turn On the Mic and Sing Along!

Move the microphone's ON/OFF switch to the ON position and start singing.

To adjust music volume: Use your phone's volume controls.

To adjust music AND voice volume: Turn the [ON-OFF/Volume dial] on the speaker or use the remote's [VOL-] and [VOL+] buttons.

To play/pause music: Press the [/TWS button] on the speaker or the [Play/Pause button] on the remote.

To skip to the next/previous track: Press the [<< button] or [>> button] on the speaker or remote.

Diagram description: A microphone with an ON/OFF switch. The front panel of the speaker showing various buttons. The remote control showing playback and volume buttons.

Using Two Singsation Rhapsody Speakers Together (TWS Mode)

If you have two Singsation Rhapsody speakers, you can set them up for True Wireless Stereo (TWS) playback.

To set up True Wireless Stereo:

1. Ensure both speakers are powered ON.
2. Quickly double-press the [/TWS button] on one Singsation Rhapsody speaker. The speaker will emit a sound indicating it's ready for TWS pairing.
3. Press and hold the [/TWS button] on the same speaker until it emits a second sound. The speakers are now in TWS mode.

To return to single-speaker mode: Turn one speaker OFF or press and hold the [/TWS button] on that speaker. Speakers will return to TWS mode when turned on again.

Using the Light Show

The Singsation Rhapsody includes a light show that activates by default when the speaker is ON.

To turn the speaker's light show ON/OFF: Press and hold the [M/ button] on the front of the speaker.

Diagram description: The front panel of the speaker highlights the [M/ button].

Using Other Audio Sources

Besides Bluetooth audio, the Singsation Rhapsody supports four other audio sources: FM radio, USB memory, SD card, and an auxiliary input.

To use FM radio: Press the [M/ button] on the front of the speaker. For the first use of FM radio, press the [>> button] on the front to scan available stations (this may take a few minutes). Then use the [<< button] or [>> button] to navigate between radio stations.

Diagram description: The front panel of the speaker shows controls relevant to FM radio scanning.

To use a USB memory stick or SD card: Insert the USB memory stick or SD card into the [USB port] or [TF CARD slot] on the front of the speaker. If MP3 music files are present in the top directory, the speaker will play them automatically.

Note: The speaker offers additional functions for music playback from an SD card or USB memory stick. Press the [EQ button] on the remote to cycle through EQ settings (names appear on the display). Press the [RPT button] to repeat a track. These functions are only available for USB memory stick or SD card.

To use an auxiliary audio source: Connect your auxiliary audio source to the [AUX input] on the front of the speaker using a 3.5mm audio cable (not included). The speaker will automatically switch to the auxiliary input.

To return to Bluetooth audio: Press and hold the [M/ button] on the front of the speaker until the display shows "BLUE."

Tour of the Singsation Rhapsody