MORRIS MFT-16253 / MFT-16254 Table Fan

Safety Instructions

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons. Please adhere to the following:

1. To prevent fire or shock hazard, DO NOT expose this appliance to rain or moisture.
2. Dangerous high voltages are present inside this enclosure. To avoid electric shock, DO NOT open the cabinet. Refer servicing to qualified personnel only.
3. This appliance is intended for household use only and not for commercial, industrial, or outdoor use. Other use not recommended may cause fire, electric shock, or injury.
4. Ensure the fan is not placed near drapes, curtains, or any objects that may be drawn into the fan.
5. To protect against fire, electrical shock, and injury to persons, do not immerse the unit, plug, or cord in water or spray it with liquids.
6. The apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the product.
7. No naked flame sources, such as candles, should be placed on the product.
8. Ventilation should not be impeded by covering the ventilation openings. Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating.
9. Care is required with the use of this apparatus in tropical climates. Do not use the appliance in temperatures over 40 °C.
10. Place the fan on a stable, level, and dry surface when operating to avoid overturning.
11. Only connect to a suitably AC 220-240V~50Hz mains socket.
12. Do not operate the fan in the presence of explosive and/or flammable fumes. Do not place the fan or any parts near an open flame, cooking, or other heating appliance.
13. Do not operate the fan with a damaged cord or plug, after a malfunction, or if it is dropped or damaged in any manner.
14. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
15. Do not operate the fan without the fan grilles properly in place.
16. Do not place the fan close to an open window. Rain splashing on the fan could cause an electric shock hazard.
17. Do not let the power cord hang over the edge of a table or counter or let it touch any hot surfaces.
18. Do not insert or allow foreign objects to enter the grille openings, as this may cause damage to the appliance.
19. Do not use the fan if the grille becomes damaged or loose.
20. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
21. Children of less than 3 years should be kept away unless continuously supervised. Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate, and clean the appliance or perform user maintenance.
22. Switch the fan OFF and unplug it from the outlet when it is not in use, when moving the fan from one location to another, and before cleaning.
23. To disconnect, grip the plug and pull it from the wall outlet. Never pull by the cord.
24. Do not attempt to repair, disassemble, or modify the appliance. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.

Product Description and Assembly

1. Description

The table fan consists of the following parts:

• 1. Fan blade
• 2. Axis
• 3. Grille ring
• 4. Base
• 5. Rear grille
• 6. Oscillation button
• 7. Motor housing
• 8. Support tilt
• 9. Axis tilt
• 10. Body
• 11. Front grille
• 12. Nut blade
• 13. Speed control
• 14. LED indicator

Diagram Description: A front view and side view of the table fan are shown, with numbered components corresponding to the list above. The side view highlights the tilt mechanism and oscillation.

2. Assembly

Follow these steps for assembly:

1. Please, check that the fan is unplugged and the speed control is set to position 0.
2. Insert the rear grille onto the motor axis and place the supplied nut to secure the rear grille.
3. Place the fan blade on the axis and secure it with the corresponding nut. Manually check if the blade rotates normally.
4. Place the front grille and install the plastic ring around the grilles. Tighten the screw of the ring to secure the assembly.

Diagram Description: A series of illustrations show the fan components being assembled: attaching the rear grille, then the fan blade, and finally the front grille with the securing ring.

Operation

To operate the table fan:

1. Place the fan in the desired location on a firm, level surface. Ensure the speed control is set to position 0.
2. Connect the fan to the power supply (AC 220-240V~50Hz).
3. Select the desired speed by turning the speed control knob. Options include: OFF, SILENT, LOW, MEDIUM, TURBO.
4. When the fan is operating, the LED light on the knob illuminates.

Diagram Description: A close-up of the speed control knob is shown, illustrating the different speed settings (Silent, Low, Medium, Turbo) and the OFF position. An indicator light is also shown. Another diagram shows the fan's motor housing with the wheel and tilt mechanism.

Oscillation Function:

• To activate oscillation, press the oscillation button (6).
• To stop oscillation, pull up the oscillation button (6). Pull carefully to avoid damage.

Cleaning and Maintenance

To maintain the appliance safely, follow these instructions:

• Always turn off the fan and remove the plug from the socket-outlet before cleaning.
• Clean the external surfaces of the fan with a soft, damp (not dripping wet) cloth.
• WARNING:
  • Do not immerse the fan in water.
  • Do not use any cleaning chemicals such as detergents and abrasives.
  • Do not allow the interior (especially the PCB) to get wet, as this could create a hazardous situation.
• It is recommended to clean the blades and grilles once a month (when in use). To dismount, follow the reverse process of the assembly instructions.
• Clean the blades and grilles with running water and dry them thoroughly before reassembling.
• When the unit is not in use, ensure it is unplugged from the wall socket. Store the fan in its original carton in a cool and dry place until later use.
• In case of malfunction or doubt, do not attempt to repair the fan yourself; it may result in a fire hazard or electric shock. Refer all servicing to qualified service personnel.

Recycling and Declaration of Conformity

Notice About Recycling

Your product is designed and manufactured with high-quality materials and components that can be recycled and reused. The symbol ♻️ indicates that electrical and electronic equipment, at their end-of-life, should be disposed of separately from household waste. Please dispose of this equipment at your local community waste collection/recycling centre. In the European Union, there are separate collection systems for used electrical and electronic products. Please help us conserve the environment we live in!

Declaration of Conformity

This product complies with the requirements of the following directives:

• EMC-Directive: 2014 / 30 / EU
• Low Voltage Directive: 2014 / 35 / EU
• ErP Directive: 2009 / 125 / EC
• CE Marking: 93 / 68 / EEC
• RoHS Directive: 2011 / 65 / EU & 2015 / 863 / EU

The CE marking (CE) indicates compliance.

The detailed declaration of conformity can be found at www.morris.gr.

Manufacturer Information

Kalliopi Karyda & Co Lp

87A, 17is Noemvriou str.
55535, Pylea, Thessaloniki
Greece

Tel: +30 2316 006600
Fax: +30 2316 006650

Website: www.morris.gr