Instruction Manual for BLAUPUNKT models including: AHDC1.1, AHDC1.1 Reverse Camera, Reverse Camera, Camera
AHDC1.1 - Blaupunkt
REVERSE CAMERA AHDC-1.1
4 3 21
Operating and Installation Instructions
CAUTIONS
Safety Notes
· Unit does not record video.
This vehicle security system has been manufactured according to established safety guidelines. However, dangers may still occur if the safety notes in this manual is not observed. This manual is intended to familiarize the user with the reverse camera important functions. Read this carefully, prior to using the reverse camera. Keep this manual in an easily accessible location. In addition, do observe the instructions of the devices used in conjunction with this reverse camera.
Attentions
· Assign a mounting location that will not obstruct driver in any circumstances. Or cause injuries to drives and passengers in case of emergency brake or accidents.
· Ensure all wires are connected properly, and that the unit is functioning well before
· Any unauthorized installation, disassembly
· Avoid automatic car wash or high-pressure water to prevent water and pressure from damaging the camera or causing
· Do not install this unit near heater outlet.
This manual may be updated from time to time without any notice.
Disclaimer In no event shall Blaupunkt be liable for any direct, indirect, punitive, incidental, special consequential damages to property or life and whatsoever arising out of or connected with the use or misuse of our products. USA & CANADA: This product is not intended for sale in the United States and Canada. If purchased in the U.S. or Canada, this product is purchased on as-is basis. No warranty, whether expressed or implied is provided in the U.S. or Canada.
the unit and void warranty of the unit. -
· Always use only the parts that are includ ed with the units only.
· Do not damage vehicle components when drilling holes for the mount.
· provided here. Consult an authorized Blaupunkt dealer or vehicle's manufacturer if the information provided here does not
· This unit is applicable for front and reverse camera use. Consult an authorized Blaupunkt dealer during installation.
1
SPECIFICATION
Features CMOS Image Sensor PAL TV System E ective Pixels 750TVL Image Resolution 25 Frame Per Second Exposure & Gain Control 1/60~1/100000sec Elctronic Shutter Auto White Balance Illumination Min. Horizontal View Vertical View Diagonal View DC12V Voltage Current DC9-16V Operanting Voltage Range Operating Temperature Storage Temperature Protection Grade RCA/6 PIN DIN Night Vision Colour Camera Sensing Area Lens
AHDC-1.1
1280 (H) x 720 (V)
0.1 Lux/F 140°H 100°V 150°D 160mA-180mA -20~+70°C -30~+75°C IP69K 3.5952(mm) x 2.0272(mm) 4 glasses
2
INSTALLATION DIAGRAM
INSTALLATION LOCATION
Attentions · Remove protective lm from camera lens before use. · Take extra precautions when setting up the connection near petrol tank and wires. · Connect Red Wire with reverse light.
3
INSTALLATION LOCATION
4
FRONT/REVERSE CAMERA LOCATION
5
TROUBLESHOOTING
If any of the following problem occur, please resort to Troubleshooting for the possible solutions. Consult Blaupunkt authorized dealer if problem persist.
Problem Display monitor / car radio does not show reverse view when reversing. Reverse view does not show even after restarting the display monitor/ car radio. Reverse view does not show even though power supplies of the reverse light or the rear car plate light is properly connected.
Solution Restart the display monitor / car radio.
Examine if the power supplies of the reverse light or the rear car plate light is properly connected. Examine if the power supply cables of the reverse light or the rear car plate light is damaged. Repair/replace if the cables are damaged.
6
Blaupunkt Car Entertainment - Asia Paci c Competence Centre 1 331 23 017 32 01
Adobe PDF library 17.00 Adobe Illustrator 28.0 (Windows)