Installation Instructions for 2310301-MS Sensor Faucet

General Setup and Mode Switching

If the sensor window is not needed, follow below instructions to make the sensor faucet to normal faucet.

Step 1: Illustrates the faucet base with connections for hot water pipe (red), cold water pipe (blue), and outlet hose. Two '[cross mark]' symbols indicate areas not to be used.

Step 2: Shows how to disconnect the sensor box, inlet hose, and outlet hose. Then, connect the pull-down inlet hose to the quick connect hose of the faucet.

Sensor Mode vs. Non-Sensor Mode:

Sensor Mode: The control box is shown with 'IN' and 'OUT' ports, indicating active sensor functionality.
Non-Sensor Mode: A circular arrow '[rotate counter-clockwise]' indicates turning a switch to disable the sensor.

Operation when Battery is Dead: 1. When the battery is dead, please turn off the switch by twisting it counter-clock-wise. Use the faucet as a normal non-sensor faucet.

Product Specifications and Installation Overview

Flow Rate: 1.8 GPM (6.8 L/min)

Model Number: 2310301-MS

Sensor Type: Mobile infrared sensor [wireless signal]

Dimensions:

Overall Height: 15.3" (390 mm)
Spout Reach: 8.5" (215 mm)
Hose Dimensions: 10"x2.6"x0.4" (250x67x10 mm)
Faucet Base Diameter: Ø2" (52 mm)
Maximum Deck Thickness: 2" (50mm)

Connections: 3/8" standard pipe connection. G1/2" adapter included.

Installation Hole Sizes:

Faucet Base: Ø1.26" (32 mm)
Sensor Control Box Mounting: Ø1.4" (35 mm)

Sink Configuration Diagrams:

Diagram showing a single-hole sink configuration.
Diagram showing a 3-hole sink configuration.

Note: Dimensions are provided in inches (mm).

Aerator Components

The faucet head includes the following components:

Screened washer (pre-installed in the conical nut)
Washer
Ø18.2x10.2 aerator
M21x1 aerator house
M24 aerator key

Regulatory Compliance

This faucet, with a flow rate of 1.8 gpm, is compliant with California water efficiency regulations. It also complies with California Proposition 65 and the Federal Safe Drinking Water Act.

Battery Requirements

Not included: CR2450 batteries.

Not included: 4 pieces of AA batteries.

	Faucet Dimensions, Features, and Installation Overview Comprehensive guide detailing faucet dimensions, installation requirements (3-hole sink), included components (water supply hoses, pop-up drain), and key product features such as swivel spout, scratch resistance, rust resistance, stain resistance, spot resistance, and ADA compliance.
	Faucet Dimensions and Product Features Detailed specifications including dimensions, installation requirements, and key features for a 3-hole faucet. Highlights scratch resistance, stain resistance, rust resistance, ADA compliance, and includes a pop-up drain and water supply hoses.
	Three-Handle High-Arc Faucet: Dimensions and Specifications Technical specifications and dimensional drawing for a three-handle high-arc faucet, detailing spout height, reach, overall dimensions, handle spacing, mounting details, and water connections.
	Modern Black Faucet Dimensions and Specifications Detailed specifications and dimensions for a contemporary matte black basin faucet, including height, reach, and base measurements in both centimeters and inches for easy reference.
	SUS3 Black Faucet Components and Overview Detailed overview of the components included with the SUS3 black faucet, featuring a sleek black finish and functional design for kitchens or bathrooms.
	4-Inch Centerset Faucet Technical Specifications and Dimensions Comprehensive technical drawing detailing the dimensions, connections, and compatibility of a 4-inch centerset faucet, including single-handle and two-handle configurations, hose specifications, and drain assembly measurements.
	BF-FDI01-MB Matte Black Faucet Specifications and Dimensions Technical specifications and dimensional details for the BF-FDI01-MB matte black faucet, including supply line information, maximum deck thickness, required hole size, and water supply connection type.
	Modern White Swivel Faucet with Digital Temperature Display - Dimensions and Features Detailed dimensions for a modern white swivel faucet featuring a digital temperature display. Key measurements include a height of 7.87 inches and a spout reach of 7.87 inches, with a nozzle width of 3.54 inches. Ideal for contemporary kitchens and bathrooms.