Whirlpool WTW4107SW Top Load Washer Dimension Guide

This document provides detailed planning dimensions and installation requirements for the Whirlpool WTW4107SW Top Load Washer.

Important Safety Warning

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS and INSTALLATION INSTRUCTIONS, located in your appliance's Product Guide, before installing and operating this appliance.

Electrical Requirements

Electrical Requirements for WTW4107SW 4.2-4.3 cu ft DOE (US) & 4.8-5.0 cu ft IEC (CAN)
Specification	Value
Minimum Circuit Amperage Rating	15 A
Operating Voltage	120 V AC only
Operating Frequency	60 Hz

Product Dimensions

The following tables detail the physical dimensions of the Whirlpool WTW4107SW Top Load Washer.

Main Unit Dimensions (Front View)

Diagram shows a front view of the washer with labels A, B, C, D indicating key dimensions.

Product Dimensions: WTW4107SW 4.2-4.3 cu ft DOE (US) & 4.8-5.0 cu ft IEC (CAN)
Label	Dimension	In (minimum)	mm (minimum)	In (maximum)	mm (maximum)
A	Height (with feet)	42⁵⁄₈	1083	43¹⁄₂	1105
B	Width	27¹⁄₈	689	-	-
C	Top of Lid Height (with feet)	38	965	38⁷⁄₈	987
D	Depth	26¹⁄₄	667	27¹⁄₈	689

Extended Dimensions (Side/Back View)

Diagram shows side and back views of the washer with labels E through M indicating various measurements related to lid, hoses, and power cord.

Product Dimensions: WTW4107SW 4.2-4.3 cu ft DOE (US) & 4.8-5.0 cu ft IEC (CAN)
Label	Dimension	In (minimum)	mm (minimum)	In (maximum)	mm (maximum)
E	Height with Lid Open	55³⁄₄	1416	56⁵⁄₈	1438
F	Height of Lid	18¹⁄₄	464	-	-
G	Width of Lid	23³⁄₈	594	-	-
H	Water Inlet Valves Height	38¹⁄₈	968	39	991
I	Water Inlet Valves from Side	4³⁄₄	121	-	-
J	Power Cord from Side	11	279	-	-
K	Power Cord Height	38¹⁄₈	968	39	991
L	Power Cord Length	61¹⁄₂	1562	-	-
M	Drain Hose Outlet Height	7¹⁄₈	181	8	203
	Drain Hose Outlet from Side	4¹⁄₄	108	-	-
	Drain Hose Length	55⁵⁄₈	1413	-	-
	Diameter of Drain Hose	1	25	-	-

Installation Clearances

Recessed Area or Closet Installation

Diagram illustrates recommended clearances for installing the washer in a recessed area or closet, including ventilation requirements for the enclosure door.

All washers should have 20" (508 mm) clearance. The dimensions shown represent recommended spacing, except for closet door ventilation openings, which are minimum required.

This washer has been tested for installation with 0" (0 mm) clearance on the sides. Consider allowing more space for ease of installation and servicing, as well as spacing for companion appliances and clearances for walls, doors, and floor moldings. Add an additional 1" (25 mm) spacing on all sides of the washer to reduce noise transfer.

If a closet door or louvered door is installed, top and bottom air openings in the door are required:

Top ventilation opening: 48 in² (310 cm²)
Bottom ventilation opening: 24 in² (155 cm²)

Minimum clearances for the enclosure:

Depth clearance behind washer: 20" (508 mm)
Height clearance above washer: 5" (126 mm)
Side clearance: 1" (25 mm) recommended (0" tested)
Front/Back enclosure clearance for ventilation: 3" (76 mm)

	Whirlpool Top Load Washer Dimension Guide Detailed planning dimensions and electrical requirements for Whirlpool Top Load Washers, including models WTW5015LW, WTW5010LW, WTW5057LW, 7MWTW5017MW, and 7MWTW5057MW. Includes information on installation spacing and product dimensions.
	Whirlpool Top Load Washer Dimension Guide This document provides detailed planning dimensions for Whirlpool Top Load Washers, including models WTW5015LW, WTW5010LW, WTW5057LW, 7MWTW5017MW, and 7MWTW5057MW. It includes electrical requirements and product dimensions in both inches and millimeters, as well as installation clearances for recessed or closet installations.
	Whirlpool Top Load Washer Dimension Guide This document provides detailed planning dimensions for Whirlpool Top Load Washers, including models WTW5015LW, WTW5010LW, WTW5057LW, 7MWTW5017MW, and 7MWTW5057MW. It includes electrical requirements and product dimensions in both inches and millimeters for various aspects of the appliance and installation clearances.
	Whirlpool Top Load Washer Dimension Guide This guide provides detailed dimension specifications for Whirlpool Top Load Washers, including electrical requirements and installation spacing recommendations for recessed areas or closets.
	Whirlpool Top Load Washer Dimension Guide Detailed planning dimensions and electrical requirements for Whirlpool Top Load Washers, including models WTW5015LW, WTW5010LW, WTW5057LW, 7MWTW5017MW, and 7MWTW5057MW.
	Whirlpool Top Load Washer Dimension Guide Detailed planning dimensions and electrical requirements for Whirlpool Top Load Washers, including models WTW5015LW, WTW5010LW, WTW5057LW, 7MWTW5017MW, 7MWTW5057MW, WTW5020SW, and WTW5025SW.
	Whirlpool Top Load Washer Dimension Guide Provides detailed planning and product dimensions for Whirlpool Top Load Washers, including models WTW5015LW, WTW5010LW, WTW5057LW, 7MWTW5017MW, 7MWTW5057MW, WTW5020SW, and WTW5025SW. Includes electrical requirements and installation clearances.
	Whirlpool Top Load Washer Dimension Guide Detailed planning dimensions, electrical requirements, and minimum closet clearances for Whirlpool Top Load Washers, including models WTW500CMW, WTW6150PB, WTW6150PW, WTW6157PB, and WTW6157PW.