Wyze Scale S Quick Start Guide

Setup

1. Before first use, remove the plastic strip from the battery compartment.
2. Download the Wyze app from the App Store or Google Play and sign in or create an account.
3. In the Wyze app, tap the '+' sign, then 'Add Device' > 'Lifestyle' > 'Wyze Scale S'. Follow the in-app instructions to complete setup. Enable your phone's Bluetooth and tap the scale's surface to activate it.
4. After connection, place the scale on a hard, flat surface. Step onto the scale with bare feet, ensuring your feet touch the 4 electrodes for accurate measurements.

In the Box

• Wyze Scale S × 1
• 1.5V AAA Batteries × 3
• Quick Start Guide × 1

Tips for Accurate Measurements

• Place the scale on a hard, flat surface.
• Do not wear socks.
• Do not let your knees touch while standing on the scale.

Units

On the back of your Wyze Scale S, find the UNIT/RESET button. Press it to change units between pounds (lb) and kilograms (kg).

Notes

• Share your Wyze Scale S with family members via the Wyze app.
• Calibrate your scale by placing it on a hard, flat surface and stepping on/off to return it to "0.0 lb".
• Consider using Athlete Mode if you exercise more than 8 hours/week and have a resting heart rate below 60 bpm.
• Ensure your age, sex, and height are correctly entered in the app for accurate results.
• Connect to the Wyze app before measuring to ensure data is recorded on the correct profile.
• If users have similar weights, connect to the specific user's app profile to avoid data mix-ups.
• Individuals under 18 or over 65, pregnant women, or those with osteoporosis, edema, or on dialysis should use the scale as a reference only, as body fat measurements may be inaccurate due to deviations from standard averages.

LED Display

The LED display shows status indicators:

• LO: Suspected error. Clean the scale with a damp cloth and try again with bare feet.
• BAT: Batteries are low. Replace batteries.
• BAT (flashing): Batteries are critically low. Replace batteries.
• Er 1: Weight is outside the supported range. Please measure again.

Explanation of Symbols

• Warning Symbol (A with circle): Indicates a warning. Please recycle electronic products responsibly where facilities exist, following local authority or retailer advice.
• Keep Dry Symbol: Indicates the device should be kept dry.

Caution

Do not use this product with medical electronic devices such as pacemakers, artificial life support systems, or portable medical devices like electrocardiographs.

Pregnant women should consult their healthcare provider before use, as physical conditions can affect hydration levels and measurement accuracy.

General Safety & Precautions

1. Do not stand on the edge of the scale to avoid falling or inaccurate measurements.
2. Avoid using the scale on tiled or wet floors to prevent slips.
3. Ensure the scale surface is clean before use to prevent slippage.
4. Handle the scale with care; do not drop or jump on it, as this can damage sensors and affect accuracy.
5. Avoid using the scale near strong magnetic fields (e.g., microwave ovens).
6. This device complies with FCC Rules Part 15, subject to conditions of no harmful interference and acceptance of received interference.
7. Unauthorized modifications may void the user's authority to operate the equipment.
8. This device complies with Innovation, Science and Economic Development Canada's licence-exempt RSS standards.
9. This equipment complies with IC RSS-102 radiation exposure limits for uncontrolled environments.
10. Bluetooth® is a registered trademark of Bluetooth SIG, Inc.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Care & Maintenance

1. Avoid high temperatures and direct irradiation.
2. If stored near freezing temperatures, allow the scale to acclimate to room temperature before use.
3. Remove batteries if the scale will not be used for 3 months or longer.
4. Clean the scale with a soft, damp cloth. Do not use abrasive cleaners or immerse in water.
5. The scale is designed to maintain safety and performance for at least 10,000 measurements.

Warranty Information

Wyze Scale S is warranted against defects in materials and workmanship for 1 year from the purchase date when used as instructed. This warranty applies to the original retail purchaser. Wyze will, at its option, repair or replace defective products free of charge.

Specifications

• Product Name: Wyze Scale S
• Model: WSCALS
• Product Size: 278 mm x 278 mm x 26 mm
• Product Weight: 4.07 lbs / 1.85 kg
• Power: 3 x 1.5V AAA batteries (included)
• Display Units: lb/kg
• Compatibility: Android 5.0+, iOS 9.0+
• Measurement Range (Weight): 11-400 lbs / 5-180 kg
• Operating Temperature: 41°F - 104°F (5°C - 40°C)
• Operating Humidity: 20 - 85% RH
• Storage/Transport Humidity: ≤90% RH
• Storage/Transport Temperature: -4°F - 131°F (-20°C - 55°C)

FCC Compliance Statements

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Compliance Statements

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Ce matériel est conforme aux limites de dose d'exposition aux rayonnements IC RSS-102 énoncées pour un autre environnement. Cet émetteur ne doit pas être situées ou opérant conjointement avec toute autre antenne ou l'émetteur.

Need Help?

Contact our Support Team: https://wyze.com/support

Join the Community: https://wyze.com/community