User Manual for Rayrun models including: HCB10-20 DALI Bus Controller, HCB10-20, DALI Bus Controller, Bus Controller, Controller
CASAMBI to dali converter
Casambi Ready DALI bus controller Model No: HCB10/20 (-S) DALI Dali bus ready 90-265V AC Power Smart Control Full Protection Compact Size Waterproof Option AC 90-265V input Built-in Dali power Single color / CCT Full protection Introduction The HCB10/20 DALI bus controller is designed to work with the Casambi app, it receives the Casambi app command and converts it to Dali bus format, then drives the standard Dali bus controlled single color or CCT LED drivers and fixtures. The power input accepts AC 90-265V international power, and the controller has a built-in Dali power supply which can drive Dali LED driver directly without the need of an external Dali power supply. For waterproof, IP68 level is available on -S version and IP63 for standard version. The controller also has strong protection feature and a compact housing for easy and secure installation and ensure the reliability and durability of the application. Dimension & Terminal 81mm 26mm 1 32 1. Power supply input Connect to AC power supply. The controller accepts international power voltage from AC 90V to 265V. Please make sure the power is in this range and make sure the AC power is shutdown before connecting the cables. Please make sure the power cable is well insulated before power on. For waterproof application, extra waterproof treatment must be applied to the cable connections. 2. Dali bus output Connect to Dali bus input of the driver or fixtures. The Dali output data format is in IEC 60929 fromat and all compatible drivers or fixtures connected to the Dali bus can response. Please be noted that this controller is not compatible to an existing Dali network and do not install it to an existing Dali network. 3. Work status indicator This indicator is hidden in the housing and it will light up with green color when the controller is working properly. 4. Wiring diagram To AC power 90-265V Dali bus Dali LED Driver Lighting Fixture 5. Protection function The controller has protection function against wrong wiring, it can protect from damage when the Dali output is accidently connected to AC power. The controller will not be damaged but may generate excess heat in this case. Please cut down the AC power and check the cable wiring if this occurs. 6. Waterproof The -S version controller has IP-68 waterproof feature with glue injection finish. For overall waterproof performance, the cables must be waterproof treated separately. Wireless signal degrade : The wireless communication ability could degrade when using at wet environment, please be aware that the wireless control distance will be shortened in such case. 7. Change model & function The controller can be configured to single color or CCT model by Casambi app. The model can only be changed on unpaired controller, please tap on the unpaired controller icon on the start page of Casambi app and select the 'Change profile' to switch to the desired model. Specification Working voltage Output Dali output voltage Dali power output current Standby power Wireless connection Working temperature (Ta) Dimension AC 90-265V Dali bus DC 12-17V 50mA <0.5W CASAMBI protocol, @ 2.4GHz ISM band -20°C~+55°C 81x26x20mmCorel PDF Engine Version 18.1.0.661 CorelDRAW X8