Sharper Image Rearview Bicycle Camera
Item No. 208843
Instruction Manual
This section provides a visual guide to the installation of the rearview bicycle camera.
Diagram: An illustration shows the rearview camera monitor mounted on a bracket, with the text "Instruction manual" overlaid.
Installation Steps
Step 1: Remove Nut
Diagram: An exploded view shows a nut being loosened and removed from the monitor's mounting bracket.
Step 2: Assemble Nut
Diagram: An exploded view illustrates assembling the nut into the base bracket, ensuring it is tightened between the monitor and the base.
Step 3: Install Monitor on Handlebar
Diagram: A diagram shows the monitor being attached to a bicycle handlebar. It indicates adjusting screws and then tightening a main screw to stabilize the monitor.
Step 4: Camera Installation
Diagram: A diagram shows the camera unit with its mounting arm, indicating a rotational adjustment capability for positioning.
Step 5: Cable Placement
Diagram: This diagram illustrates the routing of the camera's signal cable along the bicycle frame. It shows using velcro straps to secure the cable to the frame and plugging the 3.5mm cable into the monitor.
Final Look
Diagram: An illustration depicts the fully installed rearview camera system on a bicycle, showing the monitor attached to the handlebars and the camera mounted on the seat post, with the cable neatly routed.
Parts
- 1. Monitor
- 2. Nut
- 3. Monitor base
- 4. Camera signal cable
- 5. Camera base
- 6. Velcro tape
- 7. Storage triangle bag
Bike Rear View Camera Specifications
| Screen Size | 4.3" AHD 1080P |
| Aspect Ratio | 16:9 |
| Resolution | IPS800(H)*480(V) |
| Input Voltage | 5V |
| Brightness | 1000cd/m2 |
| Battery Capacity | 5000mAh |
| Solutions | 1/2.9" 2053 |
| Image Format | AHD |
| Effective Pixel | 1920H×1080V |
| Angle | 130° |
| Power supply | 5V |
| Waterproof Grade | IP68 |
