User Guide for SCIWIL models including: SW-K618 Bike Display LCD Manufacturer, SW-K618, Bike Display LCD Manufacturer, Display LCD Manufacturer, LCD Manufacturer
LCD Display SW-K618 - Sciwil
File Info : application/pdf, 14 Pages, 625.08KB
DocumentDocumentXSW-J-05-0014-2024 USERS GUIDE SW-K618 E-Bike Display ModelSW-K618 ProtocolUART 2.0 VersionV6.01 Scan QR Code to Download PDF Changzhou Sciwil E-Mobility Technology Co., Ltd. Wechat Website 1 Contents . Safety Notes............................................................................................. 3 . Overview....................................................................................................... 4 1. Product Name and Model ...........................................................................4 2. Product Introduction..................................................................................... 4 3. Specifications................................................................................................... 4 4. Function..............................................................................................................4 5. Size.......................................................................................................................5 6. Assembly............................................................................................................5 7. Serial Code........................................................................................................6 . Operation......................................................................................................6 1. Display Interface................................................................................. 6 1.1 Riding Interface.................................................................................... 6 1.2 Setting Interface.................................................................................. 7 1.3 Error Interface.......................................................................................8 2. Key Pad......................................................................................................... 8 3. Key Operation......................................................................................... 9 3.1 On/Off....................................................................................................... 9 3.2 Assist Level............................................................................................. 9 3.3 Toggle Displays..................................................................................... 9 3.4 Light On/Off............................................................................................9 3.5 Walk Assist Mode................................................................................. 9 4. Settings....................................................................................................... 10 5. Error Code.................................................................................................12 6. Connection.................................................................................................12 IV. Warranty......................................................................................................13 V. Version............................................................................................................ 14 -2 - . Safety Notes PLEASE TAKE CAUTION WHEN USEDO NOT PLUG OR UNPLUG THE DISPLAY WHILE YOUR E-BIKE IS POWERED ON. AVOID CLASHES OR BUMPS TO THE DISPLAY. AVOID USING IN HEAVY RAINS, SNOWS OR LONG EXPOSURE TO STRONG SUNLIGHT. DO NOT TEAR THE WATER-PROOF FILM ON THE SURFACE OF THE SCREEN, OTHERWISE THE WATER-TIGHT PERFORMANCE OF THE PRODUCT MAY BE DEGRADED. DO NOT PLUG OR UNPLUG THE DISPLAY WHILE THE SYSTEM IS POWERED ON. UNAUTHORIZED ADJUSTMENT TO DEFAULT SETTINGS IS NOT SUGGESTED, OTHERWISE NORMAL USE OF YOUR E-BIKE CAN NOT BE GUARANTEED. WHEN THE DISPLAY PRODUCT DOES NOT WORK PROPERLY, PLEASE SEND THE IT FOR AUTHORIZED REPAIR IN TIME. -3 - . Overview 1. Product Name and Model Product Name: E-Bike Display Product Model: SW-K618 2. Product Introduction SW-K618 features high-brightness anti-glare color LCD and minimalist interface, working as an ideal HMI solution for EN15194 electric bikes. 3. Specifications Working Voltage: DC 24V/36V/48V/52V/60V/72V Rated Working Current: 12mA Leakage current: <1uA Screen Size: 3.5"LCD Communication Type: UART (by default) / CAN (optional) Optional Functions: Bluetooth, NFC Working Temperature: -20°C ~ 60°C Storage Temperature: -30°C ~ 70°C Waterproof Rating: IP66 4. Function Boot password System unit switch (km/h or mph) Assist Level Control and Display Battery indication: battery level percentage, low voltage indication Speed display(in km/h or mph) real-time speed (SPEED), max speed (MAX), average speed (AVG) Distancesingle-trip distance (TRIP), total travel distance (ODO) Assist Mode Control and Display (3/5/9 levels) Walk assist mode -4 - Front light indication: front light status supported by controller. Error code indication Riding Info: Braking Status, Front Light Status, Cruise, Low Voltage. Turning Signals: This function works with controller. Dual Drive Control and Display: This function works with controller. Status of Double Battery Packs: optional, works with controller. NFC Function: optional. Bluetooth Connection: optional, support OTA upgrade via mobile phone. 5. Size 6. Assembly Open the holder ring/rubber spacer of the display and fix the display on the handlebar, adjust it to a proper facing angle. Use a M4 Hex Wrench to fix and tighten the screws. Standard fixing torque: 1N·m. *Damage due to excessive fixing torque is not covered by warranty. -5 - Open the holder ring/rubber spacer of the keypad and fix it on the handlebar, adjust it to a proper facing angle. Use a M3 Hex Wrench to fix and tighten the screws. Standard fixing torque: 1N·m. *Damage due to excessive fixing torque is not covered by warranty. Plug the 5-pin connector of the display to the coupling connector of the Controller. 7. Serial Code Example 111 22 333333 555 6666 36V Marked at the back of display 111Customer Code 22Protocol Code 333333P.O. Date YYMMDD) 555Order Receiving Number 6666: Production Date YYMM) . Operation 1. Display Interface 1.1 Riding Interface Status: Real-time Riding Status: Bluetooth, Front Light, Brake, Low Voltage, Turning, Cruise, Drive Status, etc. Battery Status: Residual Battery Percentage Multi-Function Section: ODO (total range), TRIP (single ride range), MAX (max. speed), AVG (average speed), TIME (riding time), VOL (battery voltage), Wh (motor power), CUR (current), etc. Assist Level Mode: 3/5/9 Levels available. -6 - 1.2 Setting Interface Settings P01 Parameter 02 In the above interface: Setting Item: P01, Parameter Value: 02 -7 - 1.3 Error Interface Error Mark Error Code In the above interface: Error Indicator: ERROR, Error Code: 06 2. Key Pad SWK2 Keypad Illustration: There are 5 keys on the SWK2 keypad, in the following instructions: is called Up Key M is called Mode Key is called Down Key -8 - 3. Key Operation Key operation guide as follows: Press and Hold: means press and hold the key(s) for more than 2s. Press: means press the key(s) for less than 0.5s. 3.1 On/Off Turn on the Display: When the display is off, press and hold the Mode Key to turn on the display, it will show boot interface and then enter riding interface. (If boot password is activated, enter the boot password at start). Turn off the Display: When the display is on, press and hold the Mode Key, the display will be turned off. If no operation is engaged for 10min (0km/h), the display will be auto-off. Auto-off time can be set in the Settings. 3.2 Assist Level Press the Up Key or Down Key to switch assist levels. There are 5 levels by default: 0/1/2/3/4/5. 0 means no assist power. 3.3 Toggle Displays When the display is on, press the Mode Key to toggle among ODO (total range), Trip (single trip range), TIME (riding time) etc. 3.4 Light On/Off Turn on the Front Light: when the front light is off, press and hold the Up Key to turn it on, and the light icon will be shown on the riding interface (to remove this functions, please reconfigure the controller). Turn off the Front Light: when the front light is on, press and hold the Up Key to turn it off, and the light icon will be off on the riding interface. 3.5 Walk Assist Mode Engage Walk Assist Mode: On the riding interface, press and hold the Down Key to enter walk assist mode. Hold the Down Key to engage walk assist mode, the walk mode icon will be shown on the riding interface, the -9 - real-time speed will be shown in the speed section. Disengage Walk Assist Mode: release the Down Key to disengage the walk assist mode, the icon will off on the riding interface. 4. Settings 4.1 Setting Operations Enter the Settings: when the display is on, press and hold the Plus Key and the Minus/Walk Assist Key together to enter the Settings. Available setting items include: system voltage, wheel size (inch), magnetic steel number for speed gauge, speed limit etc (please refer to 4.2 Setting Items). Adjust Settings: on the Settings interface, press the Plus Key or the Minus/Walk Assist Key to set values for items. The value will blink after change. Press the On/Off Key to save the set value and switch to next item. Save and Exit Settingspress and hold again the Plus Key and the Minus/Walk Assist Key together to exit the Settings and save the set value. The system will save and exit automatically if there's no operation for 10s. 4.2 Setting Items P00: Factory Reset: optional. P01: Backlight Brightness. 1: darkest; 3: brightest. P02: System Unit. 0: km (metric); 1: mile (imperial). P03:System Voltage: 24V/36V/48V/60V/72V. P04: Auto-Off Time 0: never, other value means auto-off time interval. Unit: minute P05: Pedal Assist Level 0-3 Level Mode1-3 Level Mode (no Level0) 0-5 Level Mode1-5 Level Mode (no Level0) 0-9 Level Mode1-9 Level Mode (no Level0) P06: Wheel Size. Unit: inch; Increment: 0.1. - 10 - P07: Motor Magnets Number for Speed Gauge. Range: 1-100 P08: Speed Limit. Range: 0-100km/, communications status (controllercontrolled). The max speed will be kept constant at the set value. Error Value: ±1km/h (applicable to both the PAS/throttle mode) Note: The above-mentioned values are measured by metric unit (km/h). When the system unit is set to imperial unit (mph), the speed displayed will be automatically switched to corresponding value in imperial unit, however the speed limit value in the imperial unit interface won't change accordingly. P09: Direct Start / Kick-to-Start 0: Direct Start (Throttle-on-demand); 1: Kick-to-Start P10: Drive Mode Setting 0: Pedal Assist The pedal assist level decides the motor power output. In this status the throttle does not work. 1: Electric Drive The e-bike is only controlled by the throttle. In this status the pedal assist does not work. 2: Pedal Assist + Electric Drive (electric drive does not work in directstart status) P11: Pedal Assist Sensitivity. Range: 1-24. P12: Pedal Assist Starting Intensity. Range: 0-5. P13: Magnets Number in Pedal Assist Sensor. 3 Types: 5/8/12pcs. P14: Current Limit Value. By default: 12A. Range: 1-20A. P15: Display Low Voltage Value. P16: ODO Clearance. Press and hold the Plus key for 5s and ODO value will be cleared. P17: Cruise. 0: cruise function deactivated, 1: cruise function activated. P18: Throttle Level Control. 0: throttle speed isn't divided into - 11 - different levels, 1: throttle speed is leveled as pedal assist levels. P19: Auto-Light. 0: auto-light deactivated, 1: auto-light activated. P20: Sensitivity of Light Sensor. Range: 20-100 P21: Boot Password. 4-Digit. P22: Password for Advanced Settings. 4-Digit. 5. Error Code Error Code (decimal) E00 E01 E02 E03 E04 E05 E06 E07 E08 E09 E10 E12 E13 Status Normal Reserved Brake Error PAS Sensor Error (Riding Mark) Walk Assist Mode Real-Time Cruise Low Voltage Protection Motor Error Throttle Error Controller Error Communications Error BMS Communications Error Front Light Error 6. Connection Note Not Realized - 12 - Display to Controller Controller to Display Controller Connector Pin No. 1 2 3 4 5 Wire Color RedVCC BlueK BlackGND GreenRX YellowTX Functions Display Power Wire Electric Lock Wire Display Ground Wire Display Data Receiving Wire Display Data Sending Wire Extended Functions- Front Light: Brown (DD): The power wire (+) of the light White (GND): The ground wire () of the light. Note: For waterproof connectors, wire sequences are concealed. IV. Warranty In compliance with local laws, Sciwil provides limited warranty period covering 24 months after the date of manufacturing (as indicated by the serial number), applies to quality issues during normal operations. The limited warranty shall not be transferred to a third party other than as specified in the agreement with Sciwil. Warranty Exclusions: 1. Sciwil products that have been opened, modified or repaired without authorization. 2. Damage on the connectors. 3. Damage to the surface after leaving factory, including shell, screen, buttons, or other appearance parts. 4. Damage to wiring and cables after leaving factory, including breaks and exterior scratch. 5. Damage or loss due to force majeure (e.g. fire or earthquake) or natural disaster (e.g. lightening). 6. Out of the warranty period. - 13 - V. Version This display user manual is in compliance with the general software version (A/0) of Changzhou Sciwil E-Mobility Technology Co., Ltd. There are chances that display products on some e-bikes may have a different software version, which is subject to the actual version in use. - 14 -WPS 文字