Edifier S3000MKII Active Speaker System - User Manual

1. What's in the Box?

The package includes the following items:

• Active speaker (L)
• Active speaker (R)
• Remote control
• 2 x AAA batteries
• 2 x Power cables
• USB connecting cable
• 3.5mm – RCA audio cable
• RCA – RCA audio cable
• Fiber optic audio cable
• Quick start guide
• Important safety instruction

Note: Images are for illustrative purposes only and may differ from the actual product. The bundled USB connecting cable is for audio streaming only; do not use it for device charging. Information and specifications may differ slightly from the actual product due to ongoing technical improvements and system upgrades. The actual product prevails in case of any difference.

2. Functional Operation

Initial Setup:

1. Connect audio source devices and speakers to the power source using the provided power cables.
2. Turn on the power switch. The display window on the active speaker (R) will show the current audio source. Use the remote control to select the desired audio source.

Manually Re-pair Left and Right Speakers

The two speakers are paired at the factory before shipment. They will automatically reconnect upon power-on, indicated by a solid red light on the left speaker (L). If the wireless connection fails to resume, follow these steps to re-pair:

1. Power on the right speaker (R) and press and hold the "Pair" button on its rear panel. The "PAIRING" icon will blink rapidly on the display.
2. Press and hold the "Pair" button on the rear panel of the left speaker (L). The red indicator on the left speaker (L) will blink rapidly.
3. Wait until the red indicator on the left speaker (L) is lit constantly. Pairing is complete, and the wireless connection is established.

Note: If the red indicator on the left speaker (L) blinks in a breathing pattern, it indicates that the two speakers are not connected. Repeat the above steps.

3. Speaker Controls and Features

Active Speaker (R) Controls:

• 1. Volume control/input selection: Press to cycle through inputs (Bluetooth → Line In → XLR → Optical → Coaxial → USB). Press and hold to enter standby mode or wake the speaker.
• 2. Treble control
• 3. Bass control
• 4. Active speaker pairing button
• 5. Power switch
• 6. XLR (balanced) input
• 7. Line In input
• 8. USB type-B connector (used for USB digital audio input)
• 9. Optical input
• 10. Coaxial input
• 11. Power cable connector

Active Speaker (L) Features:

• 12. Power switch
• 13. Power cable connector
• 14. Active speaker pairing button
• 15. Status indicator
• 16. OLED display window

4. Remote Control

Point the remote control towards the speaker's remote receiving window. The optimal operational distance is 7 meters. The display window will alert or blink when the system receives a command.

Remote Control Buttons:

• 1. Standby/wake: Effective only when the speaker is turned on.
• 2. Remote control indicator
• 3. Custom sound effect
• 4. Monitor sound effect
• 5. Dynamic sound effect
• 6. Previous track/next track: For Bluetooth/USB mode.
• 7. Volume up/volume down
• 8. Pause/play: For Bluetooth/USB mode. In other modes, press to mute/unmute.
• 9. Classic sound effect
• 10. Vocal sound effect
• 11. USB input
• 12. Bluetooth input
• 13. Optical/coaxial input
• 14. Line In/XLR (balanced) input

Five Sound Effects:

• CLASSIC: Reproduces a classic HIFI sound.
• MONITOR: Features a flat audio response curve for sound with no coloration.
• DYNAMIC: Provides more punch and dynamism.
• VOCAL: Emphasizes human voice, making the singer's position seem closer to the listener.
• CUSTOM: Allows customization of sound effects via the Edifier ConneX App. Scan the QR code on the manual cover to download and install the app.

Battery Replacement:

1. Press the remote control battery cover downwards with your thumb and follow the arrow direction to remove it. Use two AAA batteries, noting the '+' and '-' polarity.
2. Battery life is typically around 6 months. Replace batteries when the remote control becomes less sensitive or the control distance shortens.
3. Never use old and new batteries together.

Note: Do not place the remote control in hot or humid locations. Do not charge the batteries. Remove batteries when unused for extended periods to prevent leakage. Batteries should not be exposed to excessive heat like direct sun or fire. Danger of explosion if batteries are replaced incorrectly; replace only with the same or equivalent type.

5. Cable Connection

Connect audio source devices and speakers to the power source using power cables.

Turn the power switch on. The display window on the active speaker (R) will show the current audio source. Select the correct audio source using the remote control.

Diagram Description: The diagram shows the connection of active speakers (L and R) to an audio source and power supply via cables. It also illustrates the pairing buttons on both speakers.

6. Audio Inputs

The S3000MKII offers multiple audio input options:

XLR (balanced) input

1. Connect your audio source (e.g., CD player, decoder) to the balanced input port on the rear panel of the active speaker (R) using an XLR balanced audio cable (not included). Pay attention to color matching.

2. Press the "Volume/Input" dial on the rear panel of the active speaker (R), or press the "LINE/XLR" button on the remote control until the display window shows "XLR".

3. Play music on the connected device and adjust settings to your desired level.

Line In input

1. Connect your audio source (e.g., mobile phone, tablet) to the Line In input port on the rear panel of the active speaker (R) using a 3.5mm-RCA audio cable or an RCA-RCA audio cable. Pay attention to color matching.

2. Press the "Volume/Input" dial on the rear panel of the active speaker (R), or press the "LINE/XLR" button on the remote control until the display window shows "LINE".

3. Play music on the connected device and adjust settings to your desired level.

Optical/Coaxial input

1. Connect your audio source (e.g., Set Top Box, Blu-ray player) to the optical or coaxial input port on the rear panel of the active speaker (R) using a fiber optic audio cable or a coaxial cable (coaxial cable not included).

2. Press the "Volume/Input" dial on the rear panel of the active speaker (R), or press the "OPT/COAX" button on the remote control until the display window shows "OPTICAL" or "COAXIAL".

3. Play music on the connected device and adjust settings to your desired level.

USB digital audio input

The S3000MKII utilizes an XMOS USB interface chip, commonly found in high-end audio equipment. When connected to a PC, it extracts and plays digital audio signals directly, similar to a "USB external audio streaming" device. This method avoids sound degradation and dynamic range compression associated with standard PC audio output, ensuring original sound quality restoration.

1. Connect the USB Type-A port on your PC to the USB Type-B input port on the rear panel of the active speaker (R) using a USB A-to-B data cable.

2. Press the "Volume/Input" dial on the rear panel of the active speaker (R), or press the "USB" button on the remote control until the display window shows "USB".

3. Play music on the connected device and adjust settings to your desired level.

Note: The S3000MKII's USB interface is based on USB Audio Class 2.0, supporting high-resolution audio up to 192kHz. For Windows users, a driver must be installed. Download it from www.edifier.com by searching for "S3000MKII" and navigating to the support section. For driver software details, visit: https://www.xmos.com/support/usb-audio-driver-support. Ensure S3000MKII is set as the audio output device: Windows: Control Panel → Sound → Playback → Set "XMOS USB Audio" as default. Mac: System Preferences → Sound → Output → Select "EDIFIER S3000MKII". Supported sample rates in USB mode: 44.1kHz, 48kHz, 96kHz, and 192kHz. Playback control in USB mode may vary by application. Volume levels are not synchronized between the S3000MKII and your device; adjust them separately.

Bluetooth input

1. Press the "Volume/Input" dial on the rear panel of the active speaker (R), or press the Bluetooth button (symbol not specified in OCR, represented as ' ' ) on the remote control until the display window shows the Bluetooth indicator.

2. Select "EDIFIER S3000MKII" in your device's (mobile phone, tablet, etc.) Bluetooth settings to connect.

Note: You can search for and connect to S3000MKII in any mode on your Bluetooth device. The S3000MKII will attempt to connect to the last paired device upon power-on. Audio playback via Bluetooth is only possible when the S3000MKII is in Bluetooth mode. The PIN code for connection, if required, is "0000". Ensure your audio source device supports A2DP and AVRCP profiles for full Bluetooth functionality. To disconnect from the current Bluetooth device, press and hold the "Volume/Input" knob on the right speaker (R) or the Bluetooth button on the remote control for over 2 seconds.

7. Specifications

• Total output power (RMS): L/R (Treble): 8W+8W; L/R (Mid-range and bass): 120W+120W
• Frequency response: 38Hz-40kHz
• Audio inputs: Bluetooth, Line In, XLR, Optical, Coaxial, USB

EU Declaration:

• Frequency Band (Bluetooth): 2.402GHz ~ 2.480GHz
• Frequency Band (5.8G): 5.725GHz ~ 5.848GHz
• RF Power Output (Bluetooth): ≤10 dBm (EIRP)
• RF Power Output (5.8G): ≤14 dBm (EIRP)
• There are no restrictions on use.

8. Troubleshooting

No sound

• Check if the speaker is ON.
• Try increasing the volume using the volume control or remote control.
• Ensure all audio cables are firmly connected and the correct input is selected on the speaker.
• Check if there is a signal output from the audio source.

Cannot connect via Bluetooth

• Disconnect from any existing Bluetooth devices by pressing and holding the Bluetooth button on the remote control for over 2 seconds, then try connecting again.
• Ensure you are within the effective Bluetooth transmission range of 10 meters.
• Try connecting with a different Bluetooth device.

The S3000MK does not turn on

• Check if the main power cable is connected and if the wall outlet is switched on.

Noise coming from speakers

Edifier speakers are designed to produce minimal noise. If you experience excessive background noise, it may be due to the audio source device. Unplug the audio cables and turn the volume up. If no sound is heard at 1 meter from the speaker with no audio input, the product is functioning correctly.

Further Information

For more information about Edifier, please visit www.edifier.com.

For Edifier warranty queries, visit the relevant country page on www.edifier.com and review the "Warranty Terms" section.

Contact Information:

• USA and Canada: service@edifier.ca
• South America: Visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local contact information.