NuPhy Halo65 Quick Guide

1. System Selection / 系统选择 / モード選択 / OS 선택

Select your system mode:

• Win mode: Press Fn + X + S
• Mac mode: Press Fn + X + A

Note: Wired mode requires a data cable connection. Wireless mode requires pairing.

2. Connection Mode Selection / 连接方式选择 / 接続方法の選択 / 디바이스 연결 가이드

Switch between connection modes:

• Wired mode: Connect with a data cable.
• Bluetooth mode: Press Fn + Q/W/E/R to switch between Bluetooth 1, 2, 3, or 2.4Ghz. Long press for 3 seconds to enter pairing mode.
• 2.4Ghz mode: Connect the included 2.4Ghz receiver to your computer before pressing Fn + R.

3. Wireless Device Connection / 蓝牙&2.4G连接 / ワイヤレス接続 / 블루투스 & 2.4G 무선 연결 가이드

For wireless connections:

• Bluetooth: Long press Fn + Q/W/E for 3 seconds to enter pairing mode. Short press to switch between paired devices.
• 2.4Ghz: Plug the 2.4Ghz receiver into your computer, then press Fn + R.

RGB Light Bar / RGB灯条 / RGB ライトバー / RGB 라이트 바 상태 표시 가이드

The RGB light bar indicates battery status and connection modes:

• Battery Status:
• ? Battery >80%
• ? Battery 20%~80%
• ? Battery <20%
• ? Charging

Key Status Indicators:

• Caps Lock: Indicates if Caps Lock is active.
• Wired mode: Indicates wired connection.
• Win mode: Indicates Windows mode.
• Mac mode: Indicates macOS mode.
• Bluetooth mode: Indicates Bluetooth connection.
• 2.4G mode: Indicates 2.4Ghz connection.
• Lock Win key: Indicates if the Win key is locked.

4. Backlight Settings / 键盘背光切换 / バックライト設定 / 백라이트 사용 가이드

Control keyboard backlighting:

• Effect switching: Press Fn + Backlight effect
• Color switching: Press Fn + Backlight color
• Brightness +/-: Press Fn + ↓/↑
• Speed +/-: Press Fn + Backlight speed

5. Halolight Settings / 环形灯光切换 / リングライト設定 / 할로라이트 사용 가이드

Control the ring light:

• Effect switching: Press Fn + H +
• Color switching: Press Fn + H +
• Brightness +/-: Press Fn + H + ↓/↑
• Speed +/-: Press Fn + H + </>

6. RGB Light Bar Setting / RGB灯条效果切换 / RGBライトバーの設定 / RGB 라이트 바 설정 가이드

Control the RGB light bar effects:

• Effect switching: Press Fn + ? +
• Color switching: Press Fn + ? +
• Brightness +/-: Press Fn + ? + ↓/↑
• Speed +/-: Press Fn + ? + </>

7. Function Keys Switching / F区功能调转 / ファンクションキーの切り替え / F1~F12 & 멀티미디어키 전환

Switch between function key modes:

• Mac: Fn + 1/2/3... for multimedia functions.
• Win: Fn + 1/2/3... for F1-F12 functions.
• Function key switching: Press Fn + X + F to toggle between F1-F12 and multimedia keys.

8. Battery Indicator / 电量设置 / バッテリーチェックライト設定 / 배터리 체크 가이드

Check battery status:

• Display battery level: Press Fn + Flashes the current battery level color (RGB light bar shows battery level).
• Always on (enabled): Press Fn + 1. The RGB light bar will continuously show the battery status.
• Always on (disabled): Press Fn + 1 again to disable.

9. Factory Reset / 恢复出厂设置 / 工場出荷時の設定に復元する / 공장 초기화

To reset the keyboard to factory settings:

• Press Fn + X + B