AC Infinity Controller 69 PRO+ Quick Start Guide
Powering and Setup
Follow these steps to power on and set up your Controller 69 PRO+.
Step 1: Connect the power adapter to the controller and plug it into a power outlet.
Step 2: Connect your devices (e.g., fans, lights) to the controller's ports.
Step 3: Download the AC Infinity app from your device's app store to connect via Bluetooth or WiFi.
Diagram shows power adapter connection and device port connections.
Dashboard Overview
The dashboard provides a quick view of your environmental parameters and device status.
| Parameter | Description |
|---|---|
| Temperature (°F/°C) | Current ambient temperature. |
| Humidity (%) | Current ambient humidity level. |
| VPD (kPa) | Vapor Pressure Deficit, a measure of plant transpiration. |
| Device Status | Indicates if connected devices are on or off. |
Diagram shows the main controller screen with temperature, humidity, and device status indicators.
Modes
The controller offers various modes for environmental management:
Timer Mode
Allows you to set specific on/off times for connected devices.
Diagram shows timer settings with on/off time inputs.
Schedule Mode
Create custom schedules based on time of day or environmental triggers.
Diagram shows a weekly schedule interface.
Cycle Mode
Set devices to run in cycles (e.g., 15 minutes on, 30 minutes off).
Diagram shows cycle settings with duration inputs.
VPD Mode
Control devices based on Vapor Pressure Deficit targets. The controller uses VPD or Temp/RH as a guide for programming.
Diagram illustrates VPD calculation and target setting.
Temp/RH Mode
Control devices based on target temperature and humidity levels.
Diagram shows temperature and humidity target settings.
Settings
Customize your controller's behavior and preferences.
General Settings
Adjust display brightness, temperature units (°F/°C), and language.
Diagram shows general settings menu with options for brightness and units.
Device Settings
Configure individual device settings, such as minimum/maximum run times.
Diagram shows settings for individual device ports.
Advanced Settings
Access advanced features like data logging and firmware updates.
Diagram shows advanced settings menu.
Controller Shortcuts
Utilize shortcuts for quick access to common functions.
- Factory Reset: Hold the MODE, UP, and DOWN buttons together for 5 seconds to reset the controller to factory settings.
- Trigger Control: All four triggers can activate and run simultaneously. Turn off any triggers not in use by holding down the UP and DOWN buttons together.
Diagram shows button combinations for shortcuts.
More Information
For detailed information and support, please visit the AC Infinity website or scan the QR codes below.
Website: www.acinfinity.com
QR code linking to the AC Infinity website.
QR code linking to the product support page.
Controller 69 PRO+
Quick Start Guide
