Kraus Nolen Single Handle Pull-Down Kitchen Faucet Installation Manual

Welcome

Congratulations on the purchase of your new Kraus plumbing fixture!

Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product:

Prior to Installation

• Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement.
• Turn off the cold and hot water at the angle stops and turn on the old faucet to release any built-up pressure.
• Flush angle stops to release any debris prior to installation.
• Pre-drilled hole size requirement: 1-3/8" (min) – 1-1/2" (max).
• Max countertop thickness: 1-1/2".
• Suitable for 1, 2, or 3 hole installation.

For technical assistance or replacement parts, please contact Kraus Customer Service. Representatives are available to help via Toll-Free: 800-775-0703 or Customerservice@kraususa.com.

Diagram and Parts List

A diagram illustrates the faucet components with numbered parts. A detailed parts list follows:

*Denotes faucet component color options: SFS - Spot Free Stainless Steel, CH - Chrome, BL - Black, GR - Grey.

Tools You Will Need

• Adjustable Wrench [Adjustable Wrench Icon]
• Silicone Sealant (optional) [Silicone Sealant Icon]
• Phillips Screwdriver [Phillips Screwdriver Icon]
• Safety Goggles [Safety Goggles Icon]

Faucet Installation Procedure

Installer Tip: Shut off main water supply before installing new faucet.

Step 1: Remove mounting hardware

Remove the mounting screws (4C), mounting nut (4B), and rubber & metal washer (4A) from the mounting pipe.

[Diagram: Faucet body with mounting pipe, showing removal of washer (4A), nut (4B), and screws (4C) with an arrow indicating removal.]

Step 2A: Faucet installation - with deck plate

For three-hole installation: Deck plate (3A), base plate (3B), and silicone sealant (optional) are required.

[Diagram: Faucet body being placed through a deck plate (3A) and base plate (3B) on a countertop, with an arrow indicating upward insertion.]

Step 2B: Faucet installation - without deck plate

For single-hole installation: Deck plate (3A), base plate (3B), and silicone sealant are NOT required.

[Diagram: Faucet body being placed directly into a countertop hole.]

Step 3: Install faucet and mounting hardware

Insert faucet body (2) into the hole in the countertop or deck plate assembly (3). Install mounting hardware (4A, B & C) from underneath the countertop.

[Diagram: Faucet body inserted into countertop, with mounting hardware (4A, 4B, 4C) being attached from below.]

Step 4: Secure mounting hardware

Adjust direction of faucet body (2) so that the handle is on the right side of the faucet. Tighten mounting nut (4B) until snug. Tighten mounting screws (4C) to the nut with a Phillips screwdriver until snug.

[Diagram: Underside view showing mounting nut (4B) and screws (4C) being tightened.]

Step 5: Attach spray hose and counterweight

Connect spray hose (5) to the quick connector (7) attached to the supply line. Install weight (6) on the lowest vertical point on the spray hose (5).

[Diagram: Spray hose (5) connected to quick connector (7). Weight (6) attached to the spray hose.]

Step 6: Connect waterlines

Connect waterlines (not included) to hot and cold copper lines (8). Connect waterlines (12) to angle stops. Tighten both ends of waterlines with a wrench until snug. Turn on hot and cold angle stops and check for leaks.

[Diagram: Waterlines (12) connected to copper lines (8) and angle stops.]

Step 7: Flush spray hose

Remove spray head (1) from spray hose (5). Hold the tip of the spray hose (5). Turn the faucet on and let the water run for 60 seconds to flush any debris.

NOTE: Please make sure washer (11) is installed when attaching the spray head to the hose.

[Diagram: Faucet with spray head removed, water flowing from the hose.]

Step 8: Check for leaks

Check for leaks at all connections. Retighten if necessary.

[Diagram: Faucet with waterlines connected, showing points to check for leaks.]

Care & Maintenance

To keep the product clean and shining, follow these steps:

1. Rinse with clean water & dry with a soft cloth.
2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners.
3. Do not use a cloth with a coarse surface.
4. Unscrew the aerator and clean when necessary.

[Icons indicating gentle cleaning with a soft cloth.]

This installation manual is subject to change without further notice.

Trouble-Shooting

If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:

Maintenance - Cartridge Replacement

Step 1: Remove button

Remove button located at the top of the cartridge cover. Loosen the set screw with a hex wrench. Remove the handle and unscrew cartridge cover by hand.

[Diagram: Faucet handle being removed to access cartridge cover.]

Step 2: Unscrew the locking nut

Unscrew the locking nut with an adjustable wrench. Remove ceramic disc cartridge.

[Diagram: Locking nut being unscrewed to remove the cartridge.]

Step 3: Replace cartridge

Place the new cartridge in the handle seat. Secure the cartridge with the locking nut and assemble the handle.

[Diagram: New cartridge installed and handle reassembled.]

Codes / Standards Applicable

NSF/ANSI 372 Certified, NSF/ANSI 61-9 Certified, UPC Certified, ASME A112.18.1 Compliant (1.8 GPM / 6.8 L/min maximum flow rate).

FAUCET WARRANTY

Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. ("Kraus"). Kraus extends this warranty to the original purchaser for personal household use of the "Faucet" in its original location. The warranty is non-transferable.

Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.

Kraus warrants the mechanical component (sprayhead assembly) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.

Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and workmanship under normal usage for a period of five (5) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the five (5) year term of the original owner or end-user.

Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.

RESTRICTIONS

This warranty does not cover:

• Antediluvian, discontinued, or display products.
• Products purchased at discount outlets, unauthorized dealers, or sold on clearance.
• Negligence, misuse, abuse, improper installation, carelessness, accident.
• Hard water or mineral deposits, exposure to corrosive materials, misapplication.
• Damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions.
• Use of abrasive cleaners (powders, bleach, ammonia, alcohol, chlorine) or abrasive pads, steel wool, or wire brushes, as these will damage and wear down the finish.
• Products not installed or operated in accordance with Kraus instructions and applicable rules, regulations, and legislation.
• Products not installed by a fully insured and licensed trade professional with experience in kitchen/bathroom fixtures.
• Labor charges or costs of removal and reinstallation.
• Incidental or consequential damages (loss of use, delay, property damage, etc.).
• Marine or Outdoor Installation.

COMMERCIAL WARRANTY

Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use.

All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Contact Information & Warranty Service

For Homeowners:

Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free: 800-775-0703
Email: Customerservice@kraususa.com

For Plumbing Contractors or Trade Professionals:

Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Phone: 516-801-8955
Email: Proservice@kraususa.com

For Authorized Partners:

Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Phone: 516-801-8954
Email: Partnersupport@kraususa.com

To request warranty service, please be ready to provide:

1. Proof of purchase.
2. A description of the problem.

Download the Kraus Care & Maintenance Guide at: http://www.kraususa.com/maintenance

Product Registration

IMPORTANT: Register Your Kraus Product to Activate Your Warranty, Access Premium Customer Support, and Get Product Information.

REGISTER TODAY at http://www.kraususa.com/registration