Bluestone MC17 Vent Clip Car Mount User Manual

Introduction

The Bluestone Vent Clip Car Mount is designed to be a durable and versatile solution for mounting mobile devices in vehicles. Its sleek black design complements any car interior. The mount offers adjustable angles for optimal viewing and features an easy-to-install vent clip for secure attachment and relocation. Shock-absorbent padding is integrated into multiple areas to protect devices.

Package Contents

• 1x Mount Body
• 1x Socket
• 1x Vent Clip
• 1x Tri-pronged piece with ball at end

Product Overview

A detailed view of the Bluestone Vent Clip Car Mount, showcasing its primary components. The mount consists of a Mount Body, a secure Clamp, adjustable Wings, a Ball & Joint for articulation, and stabilizing Feet.

Key Components:

• Mount Body
• Clamp
• Wings
• Ball & Joint
• Feet

Additional visible parts include a Wing Button, Spring, and a Vent Clip.

Specifications & Features

• Approximate dimensions: 11cm height x 6.5cm width x 13cm depth when fully assembled.
• Wing span: 11cm when fully expanded.
• Feet width: 4cm.
• Strong and secure vent clip.
• Shockproof design.
• 360° rotating phone bracket.
• Easy installation.
• Tight-fitting clamp with rubber grips.
• Quick-use spring-loaded clamping mechanism.

How to Use

Follow these steps to assemble and use your Bluestone Vent Clip Car Mount:

1. Unbox all components and verify all pieces are present.
2. Take the mount body and the tri-pronged piece with the ball.
3. Screw the ball joint part onto the back of the square mount body loosely.
4. Leaving the joint slightly loose facilitates easier insertion of the ball.
5. Once the ball is seated in the socket, tighten the knob securely.
6. Take the vent clip part and position it towards the back of the mount.
7. Push firmly to click the vent clip into the tri-pronged piece. Ensure the spring side faces upwards.
8. Align the mount with a car vent. Pull back the spring-loaded clamp and wedge it onto the vent. Release to secure.
9. Press the wing pressure button on the side to allow the wings to expand for phone insertion.
10. Ensure the phone rests against the feet padding for stability and shock absorption.
11. Close the wings by pushing them inward until they click securely against the phone.
12. To remove the phone, press the wing pressure button again; the wings will open and release the device.

Care and Safety

• Use this unit only for its intended purpose.
• Keep the unit away from heat sources, direct sunlight, humidity, water, or other liquids.
• Do not expose the device to extremely high or low temperatures, as this may cause damage.
• Do not operate the unit if it has been wet or moist to prevent electric shock, injury, or damage to the unit.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified professional. Improper repairs can pose a serious risk to the user.
• Keep the unit out of reach of children.
• This unit is not a toy.

Battery Disposal:

This product contains a lithium polymer battery. Lithium polymer batteries are environmentally safe when fully discharged. Please refer to your local and state laws for proper battery disposal procedures.