Instruction Manual for anko models including: 43024094, Soap Dispenser
43024094 AUTOMATIC SOAP DISPENSER 43024094 AUTOMATIC SOAP DISPENSER Operation Instructions 1. Open battery compartment and insert 4 AAA batteries, ensure that the polarity is correct.
File Info : application/pdf, 1 Pages, 6.34MB
DocumentDocumentFront 10cm 43024094 AUTOMATIC SOAP DISPENSER When dispensing, blue light will flash. Place open hand 5cm under dispensing nozzle. 15cm 5cm is the best distance Back 43024094 AUTOMATIC SOAP DISPENSER Operation Instructions 1. Open battery compartment and insert 4 AAA batteries, ensure that the polarity is correct. Replace battery cover and screw to close. Switch 4 AAA batteries CLOS CLO SE E OPEN OPEN 2. Press the "on" switch, a blue light will flash to show that it is on. 3. To fill the dispenser, stand the dispenser upright, slide off cover and pull off lid. Pour in liquid to fill. 200ML TOUCH- 200ML FREE 4. The dispenser will need to be primed on first use, place your hand 5cm from dispensing nozzle a few times to draw the liquid up. 5. If the nozzle clogs, gently clean the nozzle to clear any dried debris. 6. Refill when liquid level is low. 7. Do no place in water or allow battery compartment to become wet, the dispenser is not water proof. 8. Do not place in direct sunlight 9. Remove batteries from the dispenser when not used for extended periods of time or when batteries are exhausted.Adobe PDF library 15.00 Adobe Illustrator(R) 24.0