Ridgeway DISCO3210BA Rechargeable Trolley Speaker
Product Features
- Handle and wheel for easy carry
- Two-Way Power Supply: AC / Built-in 12V battery
- Support Memory Card input, and FM radio function
- With Audio input
- With Wired Microphone
- With karaoke mic input and guitar input
- Microphone volume/ echo adjustable. And speaker volume/bass/treble adjustable as well
Package Contents
- 1 x BT Speaker
- 1 x Wired Microphone
- 1 x Remote Control
- 1 x Power Adapter
- 1 x Audio Cable
- 1 x User Manual
Control Panel Instruction
A diagram shows the control panel with numbered features:
- AC 110-240V POWER SUPPLY
- MICROPHONE INPUT
- MIC VOLUME-/+ CONTROL
- MIC ECHO CONTROL
- MAIN TREBLE VOLUME-/+ CONTROL
- MAIN BASS VOLUME-/+ CONTROL
- MAIN VOLUME-/+ CONTROL
- MEMORY CARD
- AUDIO MANUAL ADJUSTMENT
- RADIO ANTENNA
- MODE BUTTON
- RECORD BUTTON
- MICROPHONE FIRST
- SHORT PRESS TO THE NEXT SONG
- SHORT PRESS TO PLAY/PAUSE THE MUSIC
- SHORT PRESS TO THE PREVIOUS SONG
- RCA INPUT
- GUITAR VOLUME-/+ CONTROL
- POWER ON/OFF
- LED LIGHT ON/OFF
- GUITAR INPUT
A separate diagram shows the remote control with numbered buttons:
- MUTE BUTTON
- RANDOM PLAY BUTTON
- REPEAT BUTTON
- RECORDING / PLAYING BUTTON
- VOLUME+ CONTROL
- LAST SONG/FM UPWARD ADJUSTMENT
- NEXT SONG/FM DOWNWARD ADJUSTMENT
- PLAY PAUSE / FM SCAN
- VOLUME-CONTROL
- ALL SONG LOOP
- SOUND EFFECT
- CHOOSE SONG NUMBER
Troubleshooting
| Symptom | Cause | Remedy |
|---|---|---|
| The power can not be turned on | The built-in battery is low, and the power cord is not plugged in, or the power switch is set to OFF position | Plug the power cord into an AC outlet and/or set the main POWER to the ON position |
| NO sound | The volume control is set to 0 position | Turn the volume control to the right |
| Speaker/RCA wires are not connected securely | Connect them securely | |
| The input selector is set to the wrong item | Switch the input selector to either the AUX |
Caution: Read this manual before operating your unit
- To assure the finest performance, please read this manual carefully.
- Install this unit in a cool, dry, clean place, away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the unit to rain or water.
- Never open the cabinet. If something drops into the set, contact your dealer.
- Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipment. Never pull the wire itself.
- Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.
- Be sure to read the "TROUBLESHOOTING" section regarding common operating errors before concluding the unit is faulty.
- To prevent lightning damage, disconnect the AC power plug when there is an electrical storm.
- Since this unit has a built-in power amplifier, heat will radiate from the rear panel. Therefore, place the unit apart from the walls, allowing enough space above, behind and on the both sides of the unit to prevent fire and damage. Also do not position with the rear panel facing down on the floor or other surface.
- Vibration generated by super-bass frequencies may cause images on a TV to be distorted. In such a case, move the unit away from the affected appliance.
- This unit features a magnetically shielded design, but there is still a chance that placing it too close to a TV set might impair picture color. Should this happen, move this unit away from the TV set.
- If you hear distortion (i.e., unnatural, intermittent ammering, sounds) coming form this unit, reduce the volume level. Extremely loud playing of a movie soundtrack's low frequency, bass-heavy sounds or similarly loud popular music passages can damage this speaker system.
- Secure placement or installation is the owner's responsibility. Ridgeway shall not be liable for any accident caused by improper placement or installation of speakers.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.