MD167 2.4G + Bluetooth Wireless Rechargeable Mouse User Manual

Product Features

The MD167 mouse offers versatile connectivity with 2.4G USB and Bluetooth modes. It is a wireless, rechargeable device.

Left Button: Primary click function.
Scroll Wheel: For scrolling through content.
Page Back Button: Navigates to the previous page.
Page Forward Button: Navigates to the next page.
DPI Switch Button: Adjusts the mouse sensitivity (DPI).
Mode Switch Button / Bluetooth Pairing Button: Switches between 2.4G and Bluetooth modes, and initiates Bluetooth pairing.
Charging Indicator / Low Battery Indicator: Shows charging status and low battery warnings.
USB Charging Port: For recharging the mouse.
On/Off Switch: Powers the mouse on or off.
USB Receiver: Connects to the computer for 2.4G wireless functionality.

Connectivity Modes

2.4G USB Mode Connection

Turn on the power switch to 'ON'.
Take out the USB receiver.
Plug the USB receiver into the USB port of your computer.

Bluetooth Mode Connection

Turn on the power switch to 'ON'.
Press the mode switch button until '1' white light flashes slowly.
Long press the mode switch button for 3-5 seconds until the white light flashes quickly, enter the Bluetooth pairing state.

System Compatibility

Windows 10 System

Click 'Bluetooth Devices' on the computer.
Click 'Add or remove a Bluetooth device'.
Your computer will automatically search for 'BT + 2.4G Mouse', then click 'Pair'.

macOS System

Please complete the Bluetooth mode installation steps (1-2) before pairing.

Click 'System Preferences' on Mac.
Click 'Bluetooth'.
Your computer will automatically search for 'BT + 2.4G Mouse', then click 'Pair'.

Android System

Please complete the Bluetooth mode installation steps (1-2) before pairing.

Click 'Settings' on the device, then turn on 'Bluetooth'.
Your computer will automatically search for 'BT + 2.4G Mouse', then click 'Pair', complete pairing.
'BT + 2.4G Mouse' is 'connected' and you can use the mouse.

iOS System

Please complete the Bluetooth mode installation steps (1-2) before pairing.

Click 'Settings' on the device, then turn on 'Bluetooth'.
Click 'Add or remove a Bluetooth device'.
Your computer will automatically search for 'BT + 2.4G Mouse', then click 'Pair'.

Mode Switch Method

After BT1, BT2 and 2.4G USB receiver are connected, press the mode switch button on the side to switch between multiple mode devices.

2.4G USB Connection: Connect the USB receiver to the computer.
Bluetooth Connection: Connect via Bluetooth.

Charging Function Instruction

When the battery is low, the charging indicator will flash 3 times quickly at a rate of once per second. The warning is low battery. Please use the charging cable to charge the mouse.
Connect the charging cable to the USB port of the computer, the red light of the battery indicator will light up when charging, and the charging process will take about 1-3 hours. When the charging is complete, the battery indicator will turn from red to green.

Product Specifications

Basic Specifications

Model: MD167
Sensor Technology: Optical
DPI: 1000/1600/2400 DPI
Key Frequency: 125 million clicks
Directions: 107.4*64*41.1mm
System requirements: Windows XP, Windows7/8/10/11 or above, Mac OS X 10.10 or above.

2.4G Connection Specifications

Working range: 10m
Working voltage: 3.7V
Working current: 8.5mA
Frequency: 2402MHz-2480MHz

Bluetooth Connection Specifications

Working range: 10m
Working voltage: 3.7V
Working current: 8.5mA
Frequency: 2402MHz-2480MHz

Package Content

1 x Wireless Mouse
1 x USB Receiver
1 x USB Charging Cable
1 x User Manual

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.