RH-068 Wireless Gamepad

Product Introduction

This product supports Bluetooth connection and USB Dongle wireless connection, suitable for Switch, Android, iOS, Windows (PC), PS3 devices. It features a free Android driver, fast wireless connection, and a built-in high-capacity battery for long-lasting use.

Product Parameters

Packing List

• Wireless gamepad X1
• Warranty Card X1
• USB Dongle X1
• Type-C data charging cable X1

Product Concept

The gamepad features a standard layout including two analog sticks (Left stick, Right stick), a D-pad (cross key), face buttons (A/B/X/Y), shoulder buttons (LT, LB, RT, RB), triggers, a Home button ?, SELECT, START, and PR/PL buttons. It also includes LED indicator lights and a Type-C interface ? for charging.

Features

Low Battery Prompt

When the Gamepad is connected, the corresponding channel light flashes slowly, indicating a low power state requiring charging.

Charging Tips

• When the Gamepad is off, the charging indicator ? flashes white and turns off when fully charged.
• When the Gamepad is on and connected, the charging indicator ? flashes slowly according to the platform and lights up when fully charged.

Automatic Shut-down

The Gamepad automatically shuts down under the following conditions:

• Pressing and holding the [Home Button] ? for 5 seconds.
• If connection is unsuccessful within 30 seconds in reconnecting state.
• If pairing is not successful for 60 seconds, then connection is unsuccessful for 30 seconds.
• After 5 minutes of inactivity when connected.
• When the charging cable is unplugged while in charging state.
• When the battery voltage is lower than 3.45V while connected.

Link Back / Reconnection

Press the [Home Button] ? for 1 second to automatically reconnect to the last connected device. The indicator light of the corresponding platform will flash during reconnection.

Gamepad Vibration

The gamepad supports vibration function according to different game scenarios.

Gamepad Connection

SWITCH Mode

• Bluetooth: Press and hold Y + [Home Button] ? to power on and enter SWITCH pairing mode (white indicator ? flashes quickly). On the Switch host, navigate to the pairing interface for automatic pairing. The host assigns a channel, and the corresponding channel indicator stays on.
• Wired: Connect the Gamepad via a data cable to the SWITCH base. The Gamepad automatically connects to the SWITCH. After unplugging the data cable, it reconnects wirelessly via Bluetooth.

Android Mode

• Bluetooth: Press and hold B + [Home Button] ? to turn on Android pairing mode (red indicator ? flashes quickly). On your Android device, turn on Bluetooth, find "Gamepad", and pair. Successful pairing shows a solid red light. The mouse function can be activated by pressing L3 + R3.
• USB-Dongle: Plug the USB Dongle ? into the Android device's USB port. Short press the USB Dongle's pairing button (blue indicator ? flashes quickly). On the Gamepad, press X + [Home Button] ? to turn on and enter Android pairing mode (green indicator ? flashes quickly). The Gamepad automatically connects to the Android device, and the green indicator stays on after successful connection.

Windows (PC) Mode

• Wired: Connect the Gamepad to a Windows PC using the USB data cable while the Gamepad is off. Default mode is XINPUT (green indicator ? flashes). Press and hold SELECT + START for 3 seconds to switch to DINPUT mode (blue indicator ? flashes).
• Bluetooth: For PCs with Bluetooth or a Bluetooth 4.0 Dongle adapter: Install the USB wireless Bluetooth receiver. Press and hold RB + [Home Button] ? to start Bluetooth pairing (blue indicator ? flashes quickly). On the computer, turn on Bluetooth, find "Gamepad for pc", and pair. A solid blue indicator light indicates successful pairing.
• USB-Dongle: Plug the USB Dongle ? directly into the computer's USB port. Press and hold X + [Home Button] ? to enter computer pairing mode (green indicator ? flashes quickly). The Gamepad automatically connects to the computer in XINPUT mode (green indicator stays on). Press and hold SELECT + START for 3 seconds to switch to DINPUT mode (blue indicator lights up).

iOS Mode

• Bluetooth: Press and hold LB + [Home Button] ? to turn on iOS Bluetooth pairing mode (yellow indicator light ? flashes quickly). On your iOS or macOS device, turn on Bluetooth, find "DUALSHOCK 4 Wireless Controller", and pair. A solid yellow indicator light indicates successful pairing.

PS3 Mode

To connect to a PS3 host, first use a USB data cable for wired communication. The program automatically matches codes. After successful wired pairing, the Gamepad can communicate wirelessly via Bluetooth. After unplugging the data cable, it reconnects wirelessly via Bluetooth. A channel indicator light will be on after successful pairing.

Programming Function

The PR and PL buttons can be programmed. By default, they correspond to the A and B buttons.

• To enter programming mode, press and hold the SET button for 3 seconds. The mode light flashes quickly.
• Press the desired buttons in sequence to record them (up to 30 buttons, including press intervals). For example, to program a sequence for PL: press SET (3s), then press A, then X, then B, then press PL again. The PL button will now execute this sequence.
• To clear a programmed function, press and hold the SET button for 5 seconds. The indicator light returns to normal.
• Programmable buttons include: A/B/X/Y/L/R/ZL/ZR/L3/R3/up/down/left/right.
• Programming function memory is supported. Only the PR and PL keys can be interrupted during implementation of a programmed combination key value.

Upgrade Function

The Gamepad can be upgraded without drivers using the Type-C to USB data charging cable ?. Supported upgrade platforms include WinXP, Win7, Win8.1, and Win10.

Sensor Calibration

In power-off state, press and hold SELECT + [Home Button] ? to enter calibration mode (white indicator light ? flashes quickly). Calibration is complete when the indicator goes out. The Gamepad will automatically shut down. To return to normal, turn off the power and re-calibrate.

Reset Button

If the Gamepad becomes abnormal, use a paperclip to press the reset button located on the back of the Gamepad.

Precautions

• Do not store in humid or high-temperature places.
• Avoid knocking, beating, sticking, piercing, or attempting to disassemble the product.
• Contains a built-in battery; do not expose to fire or dispose of with general waste.
• Keep away from water or other liquids.
• Do not charge near fire or heat sources.
• Do not place heavy objects on the product.
• Do not touch ports with hands or insert foreign objects.
• Non-professionals should not disassemble the product, as it voids the warranty.
• Children should use this product under adult supervision.
• When using motion sensing, ensure sufficient space and a firm grip to prevent injury.
• When using a wired connection, ensure the cable does not pose a tripping hazard and avoid forcibly unplugging it.

Troubleshooting

Controller not recognized on smart Android TV

• 1. Confirm the smart Android TV USB interface is working.
• 2. Insufficient power supply from the smart Android TV may cause unstable USB voltage.
• 3. Try unplugging and using a different USB port.

Controller not used in game

• 1. The game itself may not support controller peripherals.
• 2. You may need to configure the Gamepad within the game's settings.

Gamepad vibration not working

• 1. The game itself may not support vibration.
• 2. Ensure the vibration function is enabled in the game's settings.

Cannot turn on

The built-in battery may be depleted. Please charge the Gamepad using the USB cable before turning it on.

Crash or unexpected drop

Ensure the Gamepad is not too far from the connected device or try reconnecting.

Warranty Information

The document includes a Warranty Card section for Product number, Dealer, Contact number, User address, Purchase date, Username, and E-mail. It also has a Warranty record section for Username, Fault description, Maintenance date, Signature, and Inspector.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.