Lutron Caséta Load Controls

Caséta Load Controls System

The Lutron Caséta family offers dimmers, switches, and fan controls that can be operated directly or remotely. When paired with Pico remote controls, these devices provide a convenient and easy-to-install system. Caséta controls utilize Lutron's patented Clear Connect RF Technology for wireless communication with Pico remote controls, Caséta motion sensors, and the Lutron Smart Hub or Smart Hub PRO (formerly Smart Bridge and Smart Bridge PRO).

Key Features

• Compatibility with Pico remote controls.
• Compatibility with Caséta motion sensors.
• Works with the Lutron App via a Smart Hub or Smart Hub PRO.
• Lutron patented Clear Connect RF Technology enables wireless communication through walls and floors.
• Includes a Front Accessible Service Switch (FASS) for safe lamp replacement.
• Works with Lutron Radio Powr Savr occupancy and vacancy sensors in standalone applications (note: sensors do not work with Smart Hub or Smart Hub PRO).

Product Types Illustrated

• Figure 1: Original Smart Switches
• Figure 2: Original Smart Dimmers
• Figure 3: Original ELV+ Smart Dimmers
• Figure 4: Caséta Plug-In Lamp Dimmers
• Figure 5: Original Smart Fan Controls
• Figure 6: Diva Smart Dimmers
• Figure 7: Claro Smart Switches
• Figure 8: Claro Smart Accessory Switches

Note: Certain models or load types may require a neutral connection. Refer to Load Type and Capacity sections for details.

Specifications

Regulatory Approvals

• cULus Listed
• NOM Certified
• FCC Approved (Class B digital device, Part 15)
• Industry Canada Certified
• IFTEL Certified
• NEMA 410 compliant for specific models (PD series and DVRF series).

Power

Operating Voltage: 120 V~ 50/60 Hz and 120/277 V~ 50/60 Hz for various models.

Key Design Features

• Tested to withstand electrostatic discharge (IEC 61000-4-2).
• Tested to withstand surge voltages (IEEE C62.41-1991).
• Load controls operate locally without requiring system control.
• Power failure memory: returns to the last set level after power restoration.
• Supports conventional 3-way wiring and mechanical switch integration.
• Compatibility with accessory switches like DVRF-AS.
• Uses Lutron Claro or designer-style wallplates (sold separately).
• Claro wallplates offer snap-on installation with no visible means of attachment.
• PD- models feature green status LEDs.
• DVRF models use a white soft glow light bar or status LED.
• PD-FSQN offers 4 fan speeds plus OFF for single ceiling fans.
• Claro Smart accessory switches control other Caséta devices remotely, not the load directly.
• Requires a standard 1-gang U.S. wallbox with recommended depth.

System Communications and Capacity

• Communication via Radio Frequency (RF) with Pico remote controls, Caséta motion sensors, and Lutron Smart Hub/PRO.
• Range: 60 ft (18 m) line-of-sight or 30 ft (9 m) through walls to Smart Hub/PRO or Caséta Repeater.
• Range to Pico remote controls or motion sensors (without Smart Hub): 60 ft (18 m) line-of-sight or 30 ft (9 m) through walls.
• Device Limits: Up to 10 Pico remote controls or motion sensors per Caséta switch/dimmer (without Smart Hub).
• Smart Hub/PRO systems support up to 75 total wireless devices (including Caséta devices, Pico controls, motion sensors, and shades). The Hub/PRO and repeater each count as one device.

Environment

Ambient operating temperature: 32°F to 104°F (0°C to 40°C). 0% to 90% humidity, non-condensing. Indoor use only.

Features Comparison Table

This table summarizes features across different Caséta models.

Load Type and Capacity

Detailed tables outline the load types and maximum capacities for various Caséta switches, dimmers, and fan controls, considering ganging and derating factors. Load types include Incandescent/Halogen, MLV, LED, Fluorescent, ELV, and fan loads. Capacities are specified for 'Not Ganged', 'End of Gang', and 'Middle of Gang' configurations.

Refer to the original document for complete load type and capacity tables for specific models like PD-5WS-DV, PD-5ANS, DVRF-5NS, PD-6ANS, PD-FSQN, PD-10NXD, PD-5NE, DVRF-5NE, PD-6WCL, and DVRF-6L.

Ganging and Derating

When installing multiple switches or dimmers in the same wallbox (ganging), derating of maximum load capacity is required. Diagrams illustrate how to remove internal fins on devices to accommodate ganging, with specific notes for models like PD-5WS-DV and DVRF series.

Operation

Caséta devices offer intuitive operation:

• Switches: Typically feature a rocker for On/Off and a status LED indicating load status.
• Dimmers: Include rocker controls for On/Off, brightness adjustment (up/down or slider), and often a 'Favorite' level setting. Status LEDs or light bars indicate load status.
• Fan Controls: Provide controls for fan speed (High, Faster, Preset, Slower, Off) and status LEDs.
• Plug-In Dimmers: Offer similar controls to wall-mounted dimmers for plug-in lamps.
• Accessory Switches: Used in multi-location setups to control loads remotely, without directly controlling the load themselves.
• FASS (Front Accessible Service Switch): A pull-out switch on most devices that safely disconnects power to the load for servicing.

Mounting

Devices are designed for installation in standard U.S. wallboxes. The mounting process involves securing the switch/dimmer to the wallbox using mounting screws and attaching a wallplate (sold separately, e.g., Claro wallplates) using adapter mounting screws.

Dimensions

Detailed diagrams provide front and side view dimensions for various Caséta models, including Original Smart Models (Switches, Dimmers, Fan Control, Plug-In Dimmer) and Diva and Claro Smart Models (Dimmer, Switch, Accessory Switch). Measurements are provided in inches and millimeters.

Wiring Diagrams

The document includes comprehensive wiring diagrams for various installation scenarios:

• Switches: Single Pole, 3-Way (with mechanical switch, Pico remote, or accessory switch), and Multi-location (3+ locations with Pico remote or accessory switches) installations. Diagrams cover models like PD-5WS-DV, PD-5ANS, PD-6ANS, and DVRF-5NS.
• Dimmers: Single Pole, 3-Way (with mechanical switch, Pico remote, or accessory switch), and Multi-location (3+ locations with Pico remote or accessory switches) installations. Diagrams cover models like PD-10NXD, PD-5NE, DVRF-5NE, PD-6WCL, and DVRF-6L. Specific diagrams also detail installations with Power Interfaces (PHPM, GRX-TVI) and Hi-lume 1% 2-wire LED Drivers.
• Fan Controls: Single Pole and 3-Way (with Pico remote) installations for the PD-FSQN model.

Key wiring notes include capping unused blue terminals, the function of LUT-MLC for specific load types, correct wire connections (e.g., red to load, black to line/hot), and reversibility of accessory switch wires.

Colors and Finishes

Caséta devices are available in several gloss finishes, including White (WH), Black (BL), Ivory (IV), Light Almond (LA), Gray (GR), and Brown (BR). PD models are available in WH, BL, IV, and LA, while DVRF models are available in all six colors. Printing limitations may affect exact color matching.

Trademarks and Brands

Lutron, Caséta, Diva, Pico, Clear Connect, Claro, Hi-lume, FASS, and Radio Powr Savr are trademarks of Lutron Electronics Co., Inc. Other product names and logos are the property of their respective owners.

External Resources

For more information on specific load types like Hi-lume 1% 2-wire LED drivers, refer to www.lutron.com. For phase selection and compatibility, consult www.casetawireless.com/change_phase and www.casetawireless.com/support.