EDUP EP-N8568 USB WiFi Bluetooth Adapter
Description
The EDUP EP-N8568 wireless network card supports 802.11N wireless devices and is backward compatible with 802.11 b/g/n. It enables simultaneous transmission of multiple channels of high-definition streaming within the home range. The adapter's performance with wireless network card and Bluetooth 4.0 makes it convenient for desktop or portable laptops.
Features
- Advanced WPA and WPA2 encryption technology
- Provides worldwide channel range adjustments
- Adaptive Frequency Hopping
- Supports simultaneous connection of seven Bluetooth devices
- Compatible with Bluetooth Class 1 specification, with 18dbm power and 100m transmission distance
Specifications
| Specification | Details |
|---|---|
| Bluetooth specification | V4.0 |
| Bus type | USB1.1/USB2.0 |
| Transmission distance | 10 meters |
| RF Power | 10dBm(Max) |
| Antenna gain | 2.07dBi |
| Transmission speed | 3M/S |
| Working current | 100mA – 200mA(BT+WIFI), Current varies with working mode |
| Operating System Support | WIN 7/WIN8/10 Operating System |
| WiFi specification | IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, CSMA/CA with ACK |
| Supported standards and protocols | IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, CSMA/CA with ACK |
| Transmission speed | 150Mbps |
| Frequency range | 2.4~2.4835GHz |
| Working channel | 1-14 |
| Modulation mode | 802.11 g/n: OFDM 802.11b: CCK(11, 5.5Mbps), QPSK(2Mbps), BPSK(1Mbps) |
| Transmission speed | 802.11b: 11,5.5,2,1 Mbps 802.11g: 54,48,36,24,18,12,9,6 Mbps 802011n: up to 150Mbps |
| Receiving sensitivity | 130M: -65dBm@10% PER; 108M: -65dBm@10% PER; 54M: -65dBm@10% PER; 11M: -87dBm@8% PER; |
| Transmission distance | The furthest distance is 100 meters indoors and 200 meters outdoors (depending on the environment). |
| RF Power | 16dBm(Max) |
| Antenna gain | 2.07dBi |
| Spread spectrum technology | DSSS(Direct Sequence Spread Frequency) |
| Working current | 100mA – 200mA(BT+WIFI)Current varies with working mode |
| Operating System Support | Windows 2000/XP/Vista/WIN 7/WIN 8/10/MAC OS Operating System |
| Use environment | Working Temperature: -20 ~45. Storage Temperature: -40 to 70 Working humidity: 10% to 90% RH without condensation Storage humidity: 5% to 90% RH without condensation |
Manufacturer Information
Manufacturer: Shenzhen EDUP Electronics Technology Co., Ltd
Address: 6 Floor, #6 Building, No.48, Kangzheng Road Liantang Industrial Area, Buji Town, Shenzhen, China
Compliance and Regulatory Information
FCC Compliance: This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, users are encouraged to try to correct the interference by reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment into an outlet on a circuit different from that to which the receiver is connected, or consulting a dealer or experienced radio/TV technician. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Industry Canada Compliance: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency Exposure Statement for IC: This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 10mm between the radiator & body.
FCC ID: 2AZDM-WIFIBT
IC: 27187-WIFIBT
CE Marking: Indicates compliance with relevant EU directives.
UKCA Marking: Indicates compliance with relevant UK regulations.
Note: Because EDUP products may not have sufficient space to print the product name, model number, trademark, MIC ID, and Logo, this information can be found in the user manual and product packaging.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
